46(W)/EDCH/2024-25

Amount

FOR SHIFTING OF 33 KV LINE, 11KV LINE AND OTHER ASSOCIATED WORKS OF NH-9, VILLAGE CHHIJARSI (TOLL TAX) OF FEEDER NO.3 & 9 EMENATING FROM 33/11 KV SUB-STATION JINDAL NAGAR IN DEPOSIT SCHEME, IN THE JURISDICTION OF EDD-PILKHUWA, UNDER EDC HAPUR.

Carriage of all petty material of estimate, from Electricity store center, Hapur to 33/11KV Sub-Station/site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Carriage of all Cable (3x300 sqmm & 3x185 sqmm) of estimate, from Electricity store center, Hapur to 33/11KV Sub-Station/site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Carriage of ST Pole 11 Mtr (9 No./ 13 Mtr (6 No.) Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Carriage of PCC Pole 9 mtrs. Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Laying of Double circuit 33 KV XLPE Cable 3x300 sqmm, after digging of earth for making pakka trench with cover by providing bricks, sand and cement wall at 3 side of cable and filling of soil & sand in cable trench. Work including cost of all materials & labour (Manual Laying as per RESPO norms)

Laying of Double circuit 11 KV XLPE Cable 3x185 sqmm, after digging of earth for making pakka trench with cover by providing bricks, sand and cement wall at 3 side of cable and filling of soil & sand in cable trench. Work including cost of all materials & labour (Manual Laying as per RESPO norms)

Erection & Fixing of STP Pole 11 mtr. long in 11 KV line after digging of pits including fixing of requisite all accessories as per RESPO Drawing norms by providing F-Bracket and holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts., as per direction of site incharge.

Erection of double pole structure with all accessories on ST Pole 11 mtr. long, fabrication and fixing of M.S. Top & Dropper Channel, M.S. T/F Angle, E Bracket, 1l KV Pin insulator with Pin, Disc Insulator with Disc fitting etc., as per RESPO Drawing/ Norns by providing all clamps made of M.S. Flat of size 50X6 mm with proper size nuts and bolts, and jumpering etc work, as per direction of site incharge.

Erection of double pole structure with all accessories on PCC Pole 9 mtr. long, fabrication and fixing of M.S. Top & Dropper Channel, M.S. TIF Angle, E-Bracket, 11 KV Pin insulator with Pin, Disc Insulator with Disc fitting etc., as per RESPO Drawing Norms by providing all made o M.S. Flat of size 50x6 mm with proper size nuts and bolts, and jumpering etc work, as per direction of site incharge.

Erection of double pole structure with all accessories on ST Pole 13 mtr. long, fabrication and fixing of M.S. Top & Dropper Channel, M.S. T/F Angle, E Bracket, 11 KV Pin insulator with Pin, Disc Insulator with Disc fitting etc., as per RESPO Drawing/ Norns by providing all clamps made of M.S. Flat o size 50x6 mm with proper size nuts and bolts, and jumpering etc work, as per direction of site incharge.

Erection of double pole structure with all accessories on ST Pole 13 mtr. long, fabrication and fixing of M.S. Top & Dropper Channel, M.S. T/F Angle, E Bracket, 33 KV Pin insulator with Pin, Disc Insulator with Disc fitting etc., as per RESPO Drawing/ Norns by providing all clamps made of M.S. Flat o size 50x6 mm with proper size nuts and bolts, and jumpering etc work, as per direction of site incharge.

Digging of earth and refling with road restoration Kaccha/footpath charge as per RESPO/Drawing Norms. (The Firm will bc fully responsible for this work and taking necessary permission), as per direction of site incharge

Making and filling of 11 KV Cable (3x185 sqmm) Jointing Kit, Indoor/outdoor type, after duly plumbing and taping of suitable XLPE Cable, providing, fixing and crimping of proper size good quality lugs, including cost of lugs and tape etc., as per RESPO Norms, and as per direction of site incharge.(Work includes making all connection to line/cable).

Making and filling of 33 KV Cable (3x300 sqmm) Jointing Kit, Indoor/outdoor type, after duly plumbing and taping of suitable XLPE Cable, providing, fixing and crimping of proper size good quality lugs, including cost of lugs and tape etc., as per RESPO Norms, and as per direction of site incharge. (Work includes making all connection to line/cable).

Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60xO.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops, as per direction of site incharge. (Only Stay Set & Stay Wire will be provided by Department).

Earthing of supports with MS earth Rod of (20x2500) mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts, as per direction of site incharge. (Only Earth Rod & G.I. Wire will be provided by Department).

Grouting of ST/PCC supports in CC 1:4:8 (Cement, sand & 40mm brick ballst) Grouting will be done in the block of size (450x450)mm xl/6th o full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge

Laying, Stringing and final sagging of over head 11KV 3X185 mmsq XLPE Cable with support of weasel conductor by providing hooks, clamps nuts & bolts as per RESPO [Drawing Norms and as per direction of site incharge. (Only XLPE Cable will be provided by Department).

Laying , Stringing and final sagging of ACSR Weasel Conductor, as per RESPO [Drawing Norms and as per direction of site incharge.

Providing & Fixing of (G.I. pipe 6"dia Class-B over 11KV 3X300 and 3X185 Sq.mm XLPE cable before mounting the cable at double pole. The work includes fitting of clamps, sealing of top and bottom of pipe and one end of pipe is to be buried under carth about 500mm each including mounting and clamping the cable on double pole structure and making connection with overhead line at both ends, as per direction of site incharge.

Safely dismantling work properly and carriage of old & used STP/PCC (5 No. 13 Mtr STP Pole) from site to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road as per direction of site incharge.

Safely dismantling work properly and carriage of old & used STP/PCC (13 No. 9/11 Mtr STP/PCC Pole) from site of two Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road as per direction of site incharge.

Safely dismantling & removal and carriage of 11 KV & 33 KV Line old & used ACSR Conductor (1105 KG) from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge

DUSHYANT ENTERPRISES (BID ID -4873247)

Singh Heavy Electricals (BID ID -4873534)