SPECIAL REPAIR REPLACEMENT OF CABLES LT PANELS AND CONNECTED ITEMS OF EXTERNAL ELECTRIC SUPPLY AT VARIOUS MD ACCN UNDER GE CENTRAL BANGLORE

Amount

Dismantling unserviceable cross arms including clamps, bolts, nuts, washers etc from pole.

Dismantlin of ACSR or AAC conductor of any size, from insulator etc from the structure/over head line all as directed.

Dismantling insulators any type, size from any description/ height of poles & structures compelete all as directed.

Excavation in trenches and not exe. 1.5 m wide and not exe. 1.5 m in depth aying of cables , stay etc. not exe. 10 Sq. m on plan and not exe. 1.5 m depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft rock complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 mts and depositing where directed .at a level not exceeding 1.5 M above the starting point complete all as directed.

M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated ( punned) upto 180mm thickness, complete all as specified and as directed. Note: Punned thickness only will be measured and paid.

Supply and laying sub class 'B' bricks of old size (standard size as per local availability) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge

Supply and fixing GI tubing light grade 50 mm dia for protection of cable on pole , under road crossing or across drain , along electric pole or floor /wall along with suitable size of MS claps , nuts & bolts etc complete all as specified and directed . ( Note: Excavation / earth work shall be measured and paid separately under relevant items of Sch ‘A’

All as per item No 09 here-in-before but dia of pipe 40 mm .

Supply & Laying in trenches or fixing on wall or passing through pipe or in cable ducts, 1100 volts grade 2 core 10sq mm XLPE insulated , armoured, electric power cables (heavy duty) with standard aluminium conductor including testing on completion coplete all as directed. Note: The rate quoted inclusive of termination at ends with suitable aluminium lugs wherever required. Make: Paragon/Havells/Polycab/ Nicco

All same as per item No 11 here-in-above but 16 Sqmm 4 core

All same as per item No 11 here-in-above but 25 Sqmm 3.5 core

All same as per item No 11 here-in-above but 3.5 core 35 Sqmm

All same as per item No 11 here-in-above but 3.5 core 50 Sqmm

All same as per item No 11 here-in-above but 3.5 core 70 Sqmm

All same as per item No 11 here-in-above but 3.5 core 95 Sqmm

All same as per item No 11 here-in-above but 3.5 core 120 Sqmm

M&L for PVC insulated 2X2.5sqmm multistrand Aluminium conductor for connection of Securiry light to OH or Pole Box including maing necessary connections and testing on competion complete all as directed.

S & F Pole box of size 250x200x105mm ,made of high quality thermoplastic polysterene dust & jet water proof, chemical, acid corrision, impact, insulated & shock proof including terminals 4Nos and including fixing arrangement on pole any type complete all as specified and as directed. Make :Sintex /Emitter/Spelberg /Hensel

S&F 70W LED street light fitting New generation energy saving and enviournment friendly long ife LED street light made up of pressure die cast aluminium housing with high efficint LED as lighting source with Toughned glass having bottam opening separate driver compartment with IP 66 protection,lumen efficancy of LED >140lm/w,system lumensmin 7000 lumens ,power factor >_ .95,and impact resistance of IK 07 with over voltageprotection, output open/short circuit protection,10KV Built-in Surge Protection Device of 70 watt LED COMPLETE all accessories and electrical connection.

S&F street light fitting New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection,lumen efficancy of LED >140lm/w,system lumensmin 6000 lumens ,power factor >_ .95,and impact resistance of IK 07 with over voltageprotection, output open/short circuit protection,10KV Built-in Surge Protection Device of 60 watt lamp COMPLETE all accessories and electrical connection.

S&F street light bracket made out OD 32/57mm(suited for LED fittig) of GI tubing medium grade 1.20 Mtr long bend to required shape as in bracket for street light fittings fixed with two pair or MS flat iron 50mm x 5mm size and 30cm long clamp of required shape with bolts nuts and washers suitable for steel tubular pole including painting of mild steel flat iron surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete

Providing trenchless bore using using ultra sounding technique and necessary machine bore of pipe size 200 mm dia suitable for 0.4 mpa working pressure mechanical numatic drilling equipment for passing water pipe line upto 200 mm dia under the existing bituminous/WBM road/PCC hard standings, depth range not less than 1.0 mtr and upto 1.5mtr and making good to the distrubed surfaces of road to match with its existing specifications all as specified and as directed by engr-in-charge at site. Note : 1. Quoted rates deems to be inclusive of transportation charges of Drilling machine, connected accessories and passing pipe through bore complete with required accessories. 2. Pipe will be measured and paid separately. 3. Any damage to MES assets caused during trenchless bore shall be recitfied by the contractor at his own cost.

Design, Fabrication, supply, installation, commissioning and testing Double Door Panel board manufactured from CPRI approved firm with canopy head, out door, cubical type panel board of over all min dimension 1.2 m (L) X 1.00m (H) X 0.50m (W) fabricated with 3.15mm thick CRCA sheet on mild steel angle iron 50X50X6 mm thick frame, totally enclosed type dust & vermin proof back side open-able with hinged shutter and front side open-able with hinged shutter and locking arrangement for individual MCCBs/MCBs , powder coated finished both internally and externally suitable for 415Volt AC 50 Hz 3 Phase 4 wire system by means of Alluminium bus bar of 800 Amps Capacity (Main bus bar ) and 800 Amps Loop Bus bar with coloured insulating tape/sleeves mounted on porcelain or synthetic insulators with provision for fixing MCCBs/MCBs necessary inter connections with Aluminium bar/strip duly coloured code insulation and providing under mentioned equipments & accessories including connections of all out going/in coming existing/New cables of required size , earthing testing point , detachable gland plate including PCC foundation in 1:3:6, type C1 of 0.5 mtrs height above GL and 0.30mtrs below GL including necessary earth work complete all as specified and as directed. a) INCOMING: MCCB 4 pole 400Amp,Icu=Ics=36KA, Adjustable thermal and adjustable Magnetic setting with extended terminals - 01No Make: L&T/Legrand/ ABB/Siemens/Havells ( (b) OUTGOING: MCCB 4 pole 250Amp,Icu=Ics=36KA, Adjustable thermal and adjustable Magnetic setting with extended terminals -04 Nos Make: L&T/Legrand/ ABB/Siemens/Havells (c) O/G MCCB TPN 100Amp, 16KA,C curve - 04 Nos . Make: Legrand cat No 408683 or equivalent model of L&T/ ABB/Siemens/Havells. (d) Indicating lamp LED type 240V 50 Hz AC -one set of 3 .Make: L&T/Legrand/ ABB/Siemens/Havells(e) Digital Ammeter (f) Digital Voltmeter(f) digital multifunction meter

Design, Fabrication, supply, installation, commissioning and testing Double Door Panel board manufactured from CPRI approved firm with canopy head, out door, cubical type panel board of over all min dimension 1.2 m (L) X 1.00m (H) X 0.50m (W) fabricated with 3.15mm thick CRCA sheet on mild steel angle iron 50X50X6 mm thick frame, totally enclosed type dust & vermin proof back side open-able fixed with hinged shutter and front side open-able with hinged shutter and locking arrangement for individual MCCBs/MCBs , powder coated finished both internally and externally suitable for 415Volt AC 50 Hz 3 Phase 4 wire system by means of Alluminium bus bar of 800 Amps Capacity (Main bus bar ) and 800 Amps Loop Bus bar with coloured insulating tape/sleeves mounted on porcelain or synthetic insulators with provision for fixing MCCBs/MCBs necessary inter connections with Aluminium bar/strip duly coloured code insulation and providing under mentioned equipments & accessories including connections of all out going/in coming existing/New cables of required size earthing testing point , detachable gland plate including PCC foundation in 1:3:6, type C1 of 0.5 mtrs height above GL and 0.30mtrs below GL including necessary earth work complete all as specified and as directed. (a) INCOMING: MCCB 4 pole 400Amp,Icu=Ics=36KA, Adjustable thermal and adjustable Magnetic setting with extended terminals - 01No Make: L&T/Legrand/ ABB/Siemens/Havells (b) OUTGOING: MCCB 4 pole 250Amp,Icu=Ics=36KA, Adjustable thermal and adjustable Magnetic setting with extended terminals -01 Nos Make: L&T/Legrand/ ABB/Siemens/Havells (b) OUTGOING: MCCB 4 pole 160Amp,Icu=Ics=25KA, Adjustable thermal and adjustable Magnetic setting with extended terminals -03 Nos Make: L&T/Legrand/ ABB/Siemens/Havells (c) O/G MCCB TPN 100-63Amp, 16KA,C curve - 02 Nos . Make: Legrand cat No 408683 or equivalent model of L&T/ ABB/Siemens/Havells. (d) Indicating lamp LED type 240V 50 Hz AC -one set of (e) Digital Ammeter (f) Digital Voltmeter(f) digital multifunction meter3 .Make: L&T/Legrand/ ABB/Siemens/Havells

Design, Fabrication, supply, installation, commissioning and testing Double Door Panel board manufactured from CPRI approved firm with canopy head, out door, cubical type panel board of over all min dimension 1.2 m (L) X 1.00m (H) X 0.50m (W) fabricated with 3.15mm thick CRCA sheet on mild steel angle iron 50X50X6 mm thick frame, totally enclosed type dust & vermin proof back side open-able fixed with hinged shutter and front side open-able with hinged shutter and locking arrangement for individual MCCBs/MCBs , powder coated finished both internally and externally suitable for 415Volt AC 50 Hz 3 Phase 4 wire system by means of Alluminium bus bar of 300 Amps Capacity (Main bus bar ) and 300 Amps Loop Bus bar with coloured insulating tape/sleeves mounted on porcelain or synthetic insulators with provision for fixing MCCBs/MCBs necessary inter connections with Aluminium bar/strip duly coloured code insulation and providing under mentioned equipments & accessories including connections of all out going/in coming existing/New cables of required size earthing testing point , detachable gland plate including PCC foundation in 1:3:6, type C1 of 0.5 mtrs height above GL and 0.30mtrs below GL including necessary earth work complete all as specified and as directed. (a) INCOMING: MCCB 4 pole 160Amp,Icu=Ics=25KA, Adjustable thermal and adjustable Magnetic setting with extended terminals - 01No Make: L&T/Legrand/ ABB/Siemens/Havells(b) OUTGOING: MCCB 4 pole 100-63Amp,Icu=Ics=25KA, Adjustable thermal and adjustable Magnetic setting with extended terminals -03 Nos Make: L&T/Legrand/ ABB/Siemens/Havells (c) analog strret light timer with MCCB -01 Nos . Make: Legrand equivalent model of L&T/ ABB/Siemens/Havells. (d) Indicating lamp LED type 240V 50 Hz AC -one set of 3 (e) Digital Ammeter (f) Digital Voltmeter(f) digital multifunction meter.Make: L&T/Legrand/ ABB/Siemens/Havells

Supply, fabrication, installation and testing of LT out door type factory made(CPRI Approved ), single door with front openable type junction box of size 900mm(H)X700mm(B)X400mm(W) (over all dimension ) made out of 3.15mm thick CRCA sheet dully supported with mild steel angle iron of size 40X40X5 mm frame, 04 Nos aluminium bus bar of of capacity 250 Amps with drilled hole for incoming/outgoing cable connection with necessary alumiium lungs, GI nuts bolts and washer and 160Amp MCCB 01 No including 08 Nos bridge insulator DMC , heavy duty, suitable for 3 Phase 4 wire system, one danger notice plate of 1.6mm thick mild steel sheet, vitreous enameled white with letters, figures and conventional skull & bones in signal red colour and fixed in front door size and PCC (1:3:6) type C-2 foundation 0.30m above normal ground level & 0.30m below ground level with necessary exacavation and earth work and painting to internal and external steel surface with powder coated (Siemence gray) RL-35 after neccesary preparation of surfaces including Indicating lamp LED type 240V 50 Hz AC -one set of 3 Make: L&T/Havells/HPL (e) Digital Ammeter (f) Digital Voltmeter compete all as directed.

Supply,installation,Testing and commissioning of canopy headed double door outdoor type totally enclosed street light controlling panel of min size 80x60x40 cm,suitable for 3 phase,4 wire 440 volt,made out of 3.15 mm thick CRCA sheet ,cubical type,duly finished with powder coated paint RAL 7035, having front hinged door with neoprene rubber gasket including danger notice plate,earthing termination points, bottom detachable gland plate with holes for incoming and out going cablesfixing arrangement with 40x40x5 mm thick MS angle iron leg grouting in PCC foundation in 1:3:6, type C1 of 0.5 mtrs height above GL and 0.30 mtrs below GL including necessary earth work comp0lete with following accessories. i) MCCB 4 Pole 63 Amps 25 KA breaking capacity - 01 No. Make: L&T/LEGRAND/ABB/Siemens/Havells ii) Digital type time switch 110-240 Volt suitable for 24 hours operation of street light. Make: L&T/LEGRAND/ABB/Siemens/Havells iii) Contractor three pole 40 Amps 415 Volt Coil operating voltage 230 Volt ,Make: L&T/LEGRAND/ABB/Siemens/Havells iv) Auto manual switch 10 Amps (make: Kaycee/L&T/legrand/AT v) MCB TPN 63 Amps ,10 KA , C Curve - 2 Nos Make: L&T/LEGRAND/ABB/Siemens/Havells (d) Indicating lamp LED type 240V 50 Hz AC -one set of 3 .Make: L&T/Legrand/ ABB/Siemens/Havells Complete all including internal connection done by using suiatable size of copper wire complete all as specified and directed.

M& L for Earthing of machinery/ equipment installed at power house /substation, using Galvanised Iron earth plate eletcrode of size 600 x 600 x6 mm thick as buried directly in ground (earth pit not less than 3mtr below normal ground level connected to GI earth strip 32 mm x 6 mm thick by means of bolts nuts,check nuts and washers at complete etc all as shown in electrical plate No-5 of SSR part-1 connected to earthing test point all as specified or indicated including PCC pit in PCC(1:3:6) type CI MS frame 50mm thick pre cast RCC (1:1½ :3) nominal mix cover slab reinforced with 8mm dia mild steel bar including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc 50mtr and funnel with watering pipe wire mesh GI protection pipe 40 mm bore including testing earthing complete all as specified and directed by Engineer-in-Charge.

M/S - KRUPA ELECTRICALS

GS TRADERS

kamadhenu Electricals

RRK PROJECTS

Chandana Enterprises