Providing Highmast Light in Ullal sayed Madani Darga in the limit of Ullal CMC

Providing Highmast Light in Ullal sayed Madani Darga in the limit of Ullal CMC

Fabricating, supplying and erection of 12Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, includ...

Supply of 150W LED floodlight luminaire with presure die cast aluminum housing body for optimal thermal dissipation. Lamp ompartment comprising anti glare clear diffuser withInjection moulded polycar...

Supplying and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts,nuts etc complete. Single Arm Bracket with 1000mm Standard 4...

Fixing halogen/metal halide/ SVL/ IL/LED floodlight fitting over existing pole/wall ceiling including clamps, bolts, nuts &wiring using suitable capacity wires

Supplying & fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts & washers etc) 3-120sec setting.

Supply and fixing of 100 to 125Amps 4 pole power contactor with NO/NC contacts on existing wood/ panel board using necessary bolts, nuts, washers and wiring etc complete with AC-3 Rating and as per IS...

Supplying and fixing FOUR POLE- 125 Amps 25KA Moulded case circuit Breaker (MCCB) over the existing wood/ panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wirin...

Supplying and fixing of 32A Porcelain fuse channel with cut out on existing wooden/ panel using necessary nuts, bolts and washers.

Supplying and fixing angle iron frame work fabricated out of 50506mm M.S. angle iron and M.S flat with bolts, washers etc and painted with 2 coats of red oxide and then two coats of approved paint.

Supply and Installation/Fixing/Provision of 200mm200mm98mm Pole box with HRC Fuse/ MCB provision and suitable connector/ terminal for 3 Ph/ 1Ph connections with Loop- In & Loop- out terminals for 10...

Supplying fixing and wiring Electronic Trivector Meter (ETV) 5 to 20Amps single phase Class- 1 Accuracy with Temper Proof Energy Meter.

Supplying of 4 core 16sqmm, LT, UG cable XLPE or Heat resistant PVC insulated, PVC extracted Inner Seath armoured UG LT cable as per IS - 1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in ...

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe/stoneware pipe/on wall/on pole as required. 25 sqmm to 75 sqmm

Digging of trench of 0.6 deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete. (As per civil SR KSRB 1-2, P-7) in soil (hard)

Supplying 63mm HDPE Pipes confirming to IS 4984:1995 with latest amendments &conveying to work site including loading &unloading at both destination &rolling, lowering into trenches, laying true to li...

Wiring for lighting/power circuit using 6sqmm one of FRLS PVC insulated 1100V grade, 6sqmm multristrand copper wire with low conductor resistance single core in open or concealed system of wiring wit...

Supplying and fixing and wiring eart electrode for grounding of lifts, Transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5mtr long GI pipe with GI funnel with mesh and suitable size reducer fix...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...