SPL REPAIR/REPLACEMENT OF OH LT LINE TO LT UG CABLE AND SPL REPAIR TO BLDG NO P/100 AND OTHER SANCTIONED WORKS AT PMS UNDER GE PANAGARH (3rd CALL)

Amount

Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling, including spreading, levelling, watering and well ramming in layers not exc. 25cmin soft/loose soil complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and as directed.

Dismantling of cross arms of MS channel or angle iron sections etc complete and setting aside complete all as specified and as directed

Dismantling of insulators any type any size complete all as specified and as directed.

Dismantling steel earth wire from existing overhead service feeder etc all as specified and directed.

Dismantling ACSR conductor of any size from existing overhead service feeder etc all as specified and directed.

Dismantling existing steel poles/ struts, any size carefully for reuse including necessary excavation demolition of concrete transportation cost etc. and removing the old unserviceable rubbish etc complete all as specified and as directed

M & L for Steel tubular swaged poles complete with cast iron/MS base plate , finial taper plug , bolts , nuts & screws as specified type 410 SP-31 , 9 meter long complete including PCC (1:3:6) type C2 (using 40 mm stone graded stone aggregate in foundation and copying with PCC (1:3:6) type C1 (using 20mm stone aggregate) complete all as specified & directed. Note: PCC anti claiming device, cross arms insulator, ACSR conductor and earth work measure and paid separately)

M&L for PCC (1:3:6) type C2 using 40mm graded aggregate as in foundation for stay set /Pole/ FPB etc including fair finish even and fir to exposed surfaces without using extra cement complete all as specified and as directed.

M & L for PCC (1:3:6) type C-1 (with using 20 mm graded stone aggregate) as coping of pole/panel including necessary form work as required complete all as specified and directed.

M&L for 80 mm bore GI tubing medium grade ISI marked for protection of cable including necessary joint complete all as specified and as directed.

M&L for 40 mm bore GI tubing medium grade ISI marked for protection of cable including necessary joint complete all as specified and as directed.

M&L and testing in trenches or passing through HDPE DWC pipe 1100 volts grade, heavy duty XLPE insulated, screened, PVC bedded galvanized steel strip armoured heavy duty electric cable with aluminium conductor cross sectional area 120 Sqmm 3.5 core complete all as specified. (Note : (1) Cost of HDPE DWC pipe to be catered in item rate and prior approval for colour of pipe to be taken from Engr-in-Charge, (2) DWC high density Polyethylene pipe shall have corrugation on outer wall but inner wall shall be plain with ISI marka conforming to IS – 14930 Part I and II amended from time to time and Accessories like HDPE snap fit coupler with neoprene ‘O’ ring shall be part of supply to make the joints water / damp proof)

All as per item No 14.00 mentioned here-in-above but 95 Sqmm 3.5 core complete all as specified and directed.

All as per item No 14.00 mentioned here-in-above but 50 Sqmm 3.5 core complete all as specified and directed.

All as per item No 14.00 mentioned here-in-above but 25 Sqmm 4 core complete all as specified and directed.

All as per item No 14.00 mentioned here-in-above but 16 Sqmm 4 core complete all as specified and directed.

All as per item No 14.00 mentioned here-in-above but 10 Sqmm 2 core complete all as specified and directed. Note: (For Sl No 14 to 19) : Cable route indicator of metal of height 600 mm above GL duly written "LT CABLE" on every 50 mtr to be fixed with PCC, 150 mm below the GL , Cost of route indicator and PCC for fixing indicators to be deemed in this item rate.

Supply & fixing in repair Street light fitting LED type capacity 60 W die-cast aluminium body, 60 watt LED 6000K lense type and toughened glass complete with suitable size bracket including clamps with all accessories complete all as specified and directed

M & L for wiring in repair for circuit / submain wiring alongwith earth wire in PVC conduit with FRLS PVC insulated copper conductor , 2 x 1.5 Sqmm + 1 x 1.5 Sqmm single core (or Three core 2.5 Sqmm copper conductor) in surface complete including necessary MS clamps after taking down old u/s wiring of any condition complete all as specified and directed.

Supply & Fixing junction in repair box made of polycarbonate with IP 65 degree of protection , dust proof, water tight, light weight, acid resistant, corrosion proof inslated & shock proof, fire retardant, self extinguishing, halogen & silica free non-toxic material, UV resistant, with internally ebbedded gasket fitted with required terminals for upto size 25 sqmm 4 core cable and including 1x10A SP MCB fitted on DIN Rail and hinged from Top and openable from down side and cable entry from sides or down including Glands complete all as specified and directed.

M&L for earthing complete with galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metreswith top edge of the plate not less than 1.5 metre below normal ground level, the earth plate surrounded by alternative layer of charcoal dust and salt with thickness of 150mm to a packed thickness of 150 mm on all sides with and including necessary exacavation earth work including GI strip 25 X 4 mm as earthing lead connected with bolted and reverted to earth plate at one end in and connected to continuous GI strip 25 X 4 mm and including all as shown in electrical plate No 3 including taking down old one complete all as specified and directed. (Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department).

M&L for Supply , install, testing and commissioning of floor mounted LT outdoor panel board AC 415 V , 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure / cubicle , fully compartmentalized type , suitable for outdoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick with CPRI Approved CRCA steel sheet of suitable size with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1 , foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter and MCCBs , hinged doors at front with suitable locking arrangement , Provision of louvers at sides , structure treated under - tank metal treatment process and duly powder coated , complete all as specified and directed:- BUSBAR :- (i) Copper bus bar 400 Amps , supported on non hygroscopic fibres and brass screws for mounting -04 Nos INCOMER (a) Supply and fix MCCB 4 pole 415 Volts of breaking capacity of 36 KA of 250 Amps with Fixed thermal and Fixed magnetic setting- 01 Nos INDICATING DEVICES (a) Supply and fixLED Indicating lamps for Main Supply indicating R, Y, B - 03 Nos (b ) Supply and fix Digital Ampere Meter 31/2 digit display , incl CT having CTR 200/5 - 01 Nos & Digital Voltmeter 0-500 Volts , SIF 96 - 01 Nos OUTGOING FEEDERS (a) Supply and fix MCCB of 4 pole , 415volts of capacity 125 amps with breaking capacity of 25 KA Fixed thermal and fixed magnetic setting - 04 No (a) Supply and fix 40 Amps MCB TPN , 415volts - 02 No (Note: (i) PCC rate for foundation to be included in this item rate. (ii) All accessories for LT distribution panel must be OEM recommendation.)

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.

M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers or modular cover plate with frame of suitable size and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

All as per item No 30.00 mentioned here-in-above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed

All as per item No 30.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as specified and directed.

M&L for wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including Modular pressed steel terminal switch boxes of diffrent module and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLS cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified.

S&F Modular switch 1 way 6 A, 1 module complete all as specified.

S&F Modular socket 6 A -2/3 pin combined, 2 Module complete all as specified.

S&F Modular Switch socket Combination 16A, 6 pin, 3 module complete all as specified.

S&F Modular Fan stepped regulator, 120 W, 2 Module complete all as specified and directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

S&F lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings complete all as specified.

S&F two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 6 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified.

S&F security light fittings 25 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed.

S&F in reapir 18 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed.

S&F in repair 9 W LED light fitting wall mounted batten 2ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 9 watt , 6000K including necessary connection complete all as specified and directed.

S&F recessed mounted 2' x 2 ' LED luminaire 36 watts for grid ceiling minimumm lumen output 100 lumen/Watt, pre-treated CRCA frame powder coated with diffused Profied including necessary connection complete all as specified and directed.

S&F Vertical distribution board double door TPN 4 way with IP 54 multiphase outgoing suitable for mounting 125 Amps as incomer with Bus bars, Neutral links complete with all accessories complete all as directed.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

S&F MCCB of 4 pole , 415volts of capacity 100 Amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting including necessry connection complete all as specified and directed.

S&F in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. Note :-Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating.

S&F in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. Note :-Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating.

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion complete all as specified and directed. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

S&F metallic Exhaust ventilation fan of sweep 300 mm sweep, 230volt AC complete with louver and all asssesories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing connected with twin core twisted flexible copper conductor (23/0.0076) of size complete all as directed by Engr-in-Charge.

S&F ceiling fan 1200 mm star 3 rated complete all as specified and as directed by Engr-in Charge.

Taking down of AC ceiling fan of any sweep & any height and opening the fan and oiling, greasing and replacement of unserviceable accessories and servicing, complete overhauling and re-assembling and testing complete for efficient functioning and hanging it back in position including provn of 0.5 Sqmm copper flexible twin twisted cable (length not exceeding 0.5 metre) from ceiling rose to fan as directed by the Engr-in-Charge. (Note : Accessories such as gun metal bush and split pin and jam nut shall be measured and paid under relavtem here-in-after).

M & L for painting of ceiling fans upto 1400mm sweep carefully, dismantling fan blades and paint with one coat of synthetic enamel paint including filling cavities with filler after cleaning all dust etc complete all as directed.

S&F, laying / connecting, testing and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge for the following ratings Note : (i) Earth work in excavation, sand cushioning, cable cover, cable protection, GI pipe shall be measured and paid separately under relevant item. (ii) Cable Route Indicator made of metal of height 300mm above GL duly written ''LT CABLE'' to be fixed on every 30 mtr distance with pcc (1:3:6), 150 mm below the GL ,cost of indicator and PCC to be considered in this item rate. (a) 95 Sqmm x 3.5 core

All as per item No 55.00 mentioned here-in-above but 50 Sqmm x 3.5 core complete all as specified and directed.

All as per item No 55.00 mentioned here-in-above but 10 Sqmm x 4 core complete all as specified and directed.

M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . Note :- Punned thickness 18 cm shall only be considered for payment

S&F in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.

S&F Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified.

S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

S&F bracket made out of galvanized tube 25mm dia bore (light grade) 1.0 meter long, and band as required,with MS clamps,nuts and boltswith two coat of red primer and one coat of sliver paint complete all as specified and directed.

S&F epoxy powder coated sheet metal enclosure for DBs, double door, Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

S&F epoxy powder coated sheet metal enclosure for DBs, double door , Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F MCB TPN 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection all as specified and directed.

S& F anodised aluminium snap grid (605X605mm ) frame work for false ceiling including dismantling complete all as specified and directed.

M&L for hanger 6mm dia G.I (upto 1200 mm length) adjusted level fixed to roof slabs by means of ceilling cleat made out of GI flat 40x3 mm size 60mm long and expansion hold fastener 12.5 mm dia 40 mm long including dismantling complete all as specified and directed.

S&F for 4mm thick 'E' board (non asbestos fibre) plain building boards fixed in aluminum frame work in ceiling flat or sloping with screws including dismantling of wall or ceiling boards complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured (Dark Colour) and including 15mm thick screed bed in cement mortar (1:4) including dismantling of floor hearth or wall tiling incl cement martar bedding complete all as specified and directed

M&L for 25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate, finished rough, as in floors, complete all as specified and directed.

M&L for non skid ceramic tiles coloured 7 to 8 mm thick(square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm, in floors etc, set and jointed with neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles over and including 15mm thick screed in cement mortar (1:6)including dismantling of floor hearth or wall tiling incl cement martar bedding complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces of size 350x250x7mm/450x350x7mm thick quality not less than group II, straight edge, k, as on skirting , dados, walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4, including dismantling wall tiling and cement mortar bedding complete all as specified and directed.

M&L for fly ash brick straight or curved on plan exc 6 mtr mean radius built in CM (1:6), including demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) in plinth protection and paving finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in patchy on fair faces of brick work or concrete surfaces finished even and fair on walls in cement mortar (1:4), including taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6),including taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed. (Make: M/s Tractor Acrylic Distemper of Asian/Bison Acrylic Distemper of Berger)

M&L for rendering 10 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling/chajja/pillar in cement mortar (1:3),including taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed.

M&L for two coats of Oil bound destemper on newely wall surface over a coat of alkali resistant primer including prepartion complete all as specified and directed.

M&L for three coats of white washing on new ceiling/chajja surfaces including preparation of complete all as specified.

M&L for two coats of white washing on old ceiling surfaces including preparation of celing surfaces complete all as specified.

M&L for preparation of new plastered or un-plastered surfaces of walls applying two or more coats of 100% premium acrylic emulsion (Exterior weather coat) paint having VOC less than 50 gm/litre and UV resistance exterior paint of required shade (Company depot tinted) with silicon additives@ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

M&L for applying Two coats of distemper oil emulsion (OBD) incl preparation on old wall surfaces of any description complete all as specified. (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).

M&L applying wall care putty on wall surfaces complete all as directed.

M&L for complete removal of old existing surfaces treatment of wall & applying two or more coats of 100% premium acrylic emulsion (Exterior Weather Coat) paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004 , alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives@ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

M&L for two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed.

Demolition of cement concrete (un-reinforced) not exceeding 15 cm thickness of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for hardcore of gauge n exc. 63mm, (broken stone/boulders)deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8, type D2, finished even and rough to receive top surfaces complete all as specified and directed.

M&L for Chequered Cement concrete tiles 20cm x 20cm x 25mm thick, set jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in cement mortar 1:4, with grey cement and pigment complete all as specified and directed.

S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane complete all as specified and directed.

S&F figured glass, 4 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified and directed.

Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified and directed.

Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified and directed.

S&F solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified and directed.

S&F factory made solid panel PVC door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifiecation & drawing complete all as specified and directed.

S&F Anodised aluminium door shutters, , aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprane packing, handles 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified and directed.

S&F Anodised aluminium ,window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised etc complete all as specified and directed.

S&F Solar control film 50 micron relfective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

S&F Anodised aluminium frame for doors, windows ventilators with one or more rebates including deco grill and joining cleat for fixing etc. complete shall as specified.

S&F Door closer hydraulically regulated, alluminium body, designation No. 3 universal type, suitable for door shutters upto 851 to 1000 mm in width and of weight between 60 to 80 kg, ISI marked, complete all as specified.

S&F rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top with three layered) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete including taking down old unserviceable tank, all as specified and directed by Engineer in Charge capacity 1000 Ltrs complete all as specified and directed.

S&F of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 25 mm dia with fly nut complete including taking down old unserviceable float valve complete all as specified and directed.

M&L for 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete including taking down old unserviceable gate valve all as directed.

S&F in repair 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as specified and directed.

S&F in repair 50 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as specified and directed.

S&F Mortice lock, brass body, 4 lever, 100 mm size, vertical type with two keys complete all as specified.

S&F Aluminium wire mesh 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminiun beads complete all as specified and directed by Engr-in-Charge.

S&F aluminum anodised GRILL (Deco grill DG 103 of M/s Associated Profiles & Aluminum Ltd) fixed with suifable 'F' section No. 8584 15.30 x 23.40 x 1.40mm fabricated and rivetted to aluminum windows, complete all as specified and directed by Engr-in-charge.

S&F in repair Alumn Curtain Rods 25mm dia Decorative type with a pair of brackets, approved pattern and colour, complete all as specified and directed.

M&L as in repair Double leg aluminium anodised door stopper with rubber foot , ISI marked and fixed with standard aluminium screws complete all as specified and directed.

S&F 150 mm long alluminium anodised handles complete all as specified and directed.

S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled Stainless steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.

M&L for 50mm thick avg PCC 1:2:4 type B-1 (using 20m graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement, including demoliton of cement concrete (un-reinforced) roof surfaces complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar 1:4 complete all as specified and directed.

M&L for preparation new surfaces or roof and applytwo coats of polyurethene (PU) acrylic based water proofing liquid compound over & including one coat of self priming @ one litre oer ten sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage/ seepage from roof/ wall complete all as specified and directed by the Engineer-in-charge Note:- (i) As per description of these item minimum two coats of Polyurethene (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out by as per manufacturer instruction. Please note no price asjustment shall be made, if as per manufacturer instructions more coats of polyurethene )PU) acrylic based water proofing liquid compound & primer are required for roof treatment. (ii) Quoted rate shall be deemed to be included for work in buiding/ structure of any height.

S&F in repair vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440mm, white, with integral foot rests and with ‘P’ or ‘S” trap, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including provision of lime concrete bedding and make good the disturbed surface, complete all as specified and directed.

S&F 10 ltr capacity PVC flushing cistern syphonic action type white dual flush ISI (IS 7231) marked with flush pipe in repair complete with all fixing arrangements complete all as specified and directed.

S&F in repair wash basins, vitreous china, white, flat back, size 550 mm x 400 mm with and including cast iron brackets (embedded in wall upto 110mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc with silicone sealant complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed

M&L for 100 mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed

S&F Hat and coat hooks, solid body Aluminium 175mm to 250 mm fixed to wall with screw and rawl plugs, fixed as in repair complete all as specified and directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc, and making good, cutting not exceeding 10 cm girth, in brick walls complete all as specified and directed

M&L for tubes 15 mm bore, ‘medium grade’, galvanized with all fittings and fixed complete to walls and ceilings or laid in floors, including taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed

M&L for (except tubes) and labour for 15mm dia GI tubing medium grade with all fittings to walls, ceiling or laid under floors including taking up or down steel tubing and connections 15 mm bore complete all as specified and directed.

S& F in repair Cast copper alloy, chromium plated long neck pillar cock, suitable for 15 mm bore pipe complete all as specified and directed.

S&F in repair Consealed stop valve, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified and directed.

S & F CP Stop valve, any description, suitable for 15mm bore pipe as in repairs complete all as specified and directed

S&F in repair Bib taps, cast copper alloy with handle, chromium plated fancy type, long body with wall flange screwed down, suitable for 15 mm bore pipe, complete all as specified and directed

S&F in repair CP Swivel shower arm 15mm size,195 mm long with bend of 45 degree with flange of fixing with 15mm pipe (Minimum weight 40 gm), complete all as specified.

S&F Cast copper alloy, chromium plated towel rail, complete all as specified and directed.

S&F Waste coupling of PTMT, for WHB any colour half or full threaded suitable for 32 mm size discharge pipe (Minimum weight 45 gm) IN REPAIR, complete all as specified and directed.

S&F in repair Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes complete all as specified.

S&F Vitreous china bowl urinal flat back type, white and including all fixing accessories like waste coupling and waste pipe etc. Complete fixed as in repairs all as specified and all as specified and directed

Dismantling of cast iron pipes with all fittings and fixing acessories, jointed in cement mortar 50-100 mm bore, at any location, complete all as specified.

S&F PVC (SWR) pipes single socketed in any length with rubber complete all as specified and directed

S&F PVC SWR bends 110mm with oval acess door complete all as specified and directed

S&F in repair grating with or without hole of PTMT (Minimum weight 25 gm) and fitting of shade matching to tiles/floor, fixed with white cement including matching shade pigment complete all as specified.

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft /loose soil complete all as specified and directed

M & L for hardcore of broken stone boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for sand filling under floor in foundation including watering and consolidation all as specified.

M & L for cement concrete 1:4:8, Type D-2 (Using 40 mm graded stone aggregates) in foundations etc complete all as specified and directed.

M & L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L for 100mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) finishing smooth & even without using extra cement complete all as specified and directed

M & L for fly ash brickwork with subclass `B' bricks old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed

M&L for preparation surfaces of steel over 10 cm width or girth and apply of two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for steel work in tubular trusses Post/columns including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade ST-240, complete all as specified and directed.

M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

M/S Ali Trading Co

BANSAL CONSTRUCTION