SPECIAL REPAIRS TO BLDG NO T-7 and T-3 (OTM ACCN) IN R/O 125 INFANTRY BATTALION (TA) UNDER AGE B/R (S) NO-I OF GE (SOUTH) SECUNDERABAD

Amount

Dismantling of single layer mangalore pattern or similar tiles roofing inclduing ridges complete all as specified and directed.

Dismantling the battens for tiles of any size including tiling fillets spaced exc 15cm c/c complete all as specified and directed.

Dissmantling timber scantling 40 sq cm and over in any position complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F 2nd class hard wood as in scantling clean sawn timber fixed complete all as specified and directed.

M&L preparing new surfaces of wood and wood based materials of any description and girth not otherwise described and treating with two coats of creosote oil etc, complete all as specified and directed.

M&L preparing old surfaces of wood and wood based materials of any description and girth not otherwise described and treating with two coats of creosote oil complete all as specified and as directed.

S & F MS rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates or as in running rail conforming to Fe 410-W Gde E-250, Quality A all as specified and as directed.

M&L Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as on roof covering/ridges fixed with self tapping screws complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets complete all as specified and directed.

M&L for providing false ceiling with anodised aluminium snap grid false ceiling of grid size 605 X605 mm consisting of aluminium main and cross T section of size 25 X25 X1.6 mm thick and wall angle of size 25 X25 X 2 mm thick fixed to RCC roof with rawl pluges/GI wire suspenders complete all as specified and directed.

S&F 4 mm thick asbestos cement plain building boards ,fixed to aluminium frame work with screws and applying two coats of distempers oil emulsion over one coat of primer in ceiling complete all as specified and as directed.

S&F 4mm dia plain MS wire galvanised class 3 as in having wire of ceiling complete all as specified and as directed.

Dismantaling stone slabs and tiles of any description or thickness in floor ,aprones laid bedded and pointed in any mortar complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness below and above ground level complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out as in berms hard/dense/ soil complete all as specified and directed.

M&L for 75mm thick plain cement concrete type D2 (1:4:8)(40mm greded aggregate) as in sub base of floor, etc,complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25 mm thick over and including 20 mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc, complete all as specified and directed.

All as per item No.20 above but in skirting /dados over and including 15 mm thick rendering in CM (1:4) etc, complete all as specified and directed.

Taking down cement or cement lime plaster hacking of key racking out joint of old brick work or stone work complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar complete all as specified and directed.

M&L for brick work with sub class B bricks straight or curved on plan exc 6m mean radious built in CM (1:6) complete all as specified and directed.

M&L Rendering 15 mm thick in CM (1:6) on existing wall surfaces of brick/concrete/mud/lime surfaces etc, finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 15mm thick in CM 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surface on wall applying two coats of oil bound distempers and one coat of alkali resistant priming paint over two coats of wall care putty for smoothening the surfaces complete all as specified and directed.

M&L for complete removal of existing treatment applying two coats of oil bound distemper and one coat of alkali resistant priming paint over two coats of wall care putty for smoothening the surfaces complete all as specified and directed.

M&L complete removal of existing treatment applying two coats of cement base paint over a coat of alkali resistant primer paint on wall complete all as specified and directed .

M&L for applying two coats of two coats of cement base paint over a coat of primer including preparation of new plastered surfaces of walls complete all as specified and directed .

M&L for PCC type B1 (1:2:4) ( using 20 mm size graded stone aggregate) as in coping, haunching bed blocks etc complete all as specified and directed.

M&L for 75mm thick plain cement concrete in type C1 (1:3:6) (using 20 mm size graded stone aggregates) as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Cutting opening through brickwalls built in cement mortar for door and windows and other openings as in hold fast etc complete all as specified and as directed.

M&L for Plain cement concrete type B1 (1:2:4) using 20mm size graded stone aggregates as in hold fast complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each incl steel windows/ventilators etc complete all as specified.

S&F Steel window with side hung shutters including projection type hinges with steel handle,and steel peg stay,complete with out glazing bars,guard bars dovetailed or welded complete all as specified and directed

S&F in galvanised mild steel wire 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F in Repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

Hacking out old broken glass of any thickness, size quality or description ) from wooden frames etc glazed with putty or fixed with beads complete all as specified and directed.

M&L sheet glass 3mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

M & L for preparation of new steel surfaces and applying 2 coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

M & L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherswise described and painting with two coats of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old painted wooden surfaces applying two coats of sythitic enamal paint complete all as specified and as directed.

S&F in Repairs aluminium anodised tubular curtain rod with brackets of approved quality complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B-1 using 20 mm sizd graded stone aggregate ) as in floors complete all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed

M&L for Glazed ceramic coloured tiles of size 245X325X6mm wall tiles set and jointed in neat cement and in white/coloured cement to match with the colour of tile over 10 mm thick plaster in CM 1:4 as in skirting / dados etc, complete all as specified and directed

S&F for Mild steel framed work such as grills, guard bars, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gde-E-165 all as specified and directed.

S&F in Repairs fancy type bib taps,cp brass chromium plated with capstan head, screwed down, screwed for 15 mm bore iron pipe complete all as specified and as directed.

S&F Stop valves, CP brass chromium plated, fancy type with capstan head screwed down, high pressure, screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed.

S & F in repair 15 mm dia stop valves cp brass chromium plated with long shank (concealed), screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs angular stop valve cp brass chromium plated screwed for 15 mm bore iron pipe complete all as specified and as directed.

S&F in repairs Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.

PVC (SWR) floor trap, plain with grating including jointing with solvent cement of size 75mm complete all as specified and as directed.

S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls,(concealed) 15mm bore.including taking down old pipe complete all as specified and as directed.

Demolition and breaking up drain AC pipes/PVC pipe set in cement mortar of any size complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls bore of the pipe 110mm complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 75mm complete all as specified and as directed.

S&F PVC (SWR) bends 110mm all as specified and as directed.

S&F PVC (SWR) bends 75mm all as specified and as directed.

S&F PVC (SWR) bent cowl 110mm complete all as specified and directed.

Dismantling water tanks exc 250 and n exc 500 Ltrs capacity of any type or size complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 Llitres including PTMT ball valve high pressure of 20mm complete all as specified and directed.

S&F in repairs Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore and complete all as specified and directed.

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed

M&L for Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Srame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and as directed.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin type C-21 anodised and fixed complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm but n exc 4 sqm each incl etc complete all as specified.

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought framed rebated and solid, rounded or chamfered, put together with glue pinned at joints

S&F 2nd class hard wood, Plain framed, panelled shutter of 35 mm thk factory made (two panel) with lock rail and panel of 9MM B.W.P. commercial ply or 12 MM veneered particle board with commercial veneering on both faces. i,e size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L 30 mm thick 2nd class hard wood Glazed and skeleton shutters,open rebated and prepared to receive glass,gauze, etc. (withoutsash bars), edges of framing plain,chamfered orrounded. fitted with cut and mitred beadsfor securing glass,elc.;sizes of members of shutters asspecified in SSR Part I, Section 8, clause8.24 (a); supplied and fitted to chowkats

S&F Mild Steel butt hinges 100mm long medium weight cold rolled mild steel etc all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250mm long all as specified and directed.

S&F 300mm long ordinary rat tail rod pattern spring incl roller and plate complete all as specified and directed.

S&F aluminium handles fabricated type, anodised, 150 mm size complete, all as specified and directed.

S&F in Floor door stopper of aluminium alloy body of 140mm long complete all as specified and as directed.

M&L for preparation of new wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, all as specified.

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/ power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified

Taking down the existing unserviceable main switch/cut out/DBs of any type /capacity /description as existing at site including making good the disturbed surfaces to match with the existing finishes all as directed.

M&L for point wiring with 1.5 sq mm copper conductor single core PVC insulated FRLS 1100 Volts multistranded drawn through and including rigid PVC conduit and conduit accessories of 20mm dia medium grade ISI marked concealed in wall / ceiling / floor etc., including running up of 1.5 sq mm copper conductor PVC insulated FRLS cable as earth continuity conductor alongwith wiring and connecting to the common earth dolly complete all as specified for One light/bell point controlled by one, one way switch 5 Amps SP.

All as per item No.83 above but for One ceiling fan/exhaust fan point controlled by one, one way switch and regulator .

All as per item No.83 above but for One 2/3 Pin 5 Amps switch socket out let point controlled by one switch on the same board.

All as per item No.83 above but for One 2/3 Pin 5 Amps switch socket out let point controlled by one switch on the Independent board.

All as per item No.83 above, but using 4.0 sq mm single core FRLS copper conductor cable, multistranded PVC insulated 1100 V grade for 5/15 Amps switch socket point including running up of 4.0 sq mm FRLS copper conductor PVC wire as earth continuity conductor alongwith wiring and connecting to the common earth dolly.

S & F Switch piano type single pole one way flush type 5 Amps capacity 230 volts.

Supply and fix switch socket combination flush type multipurpose 2/3 pin 5 Amps,230 Volts complete all as specified.

Supply and fix socket outlet flush type multipurpose 2/3 pin 5 Amps,230 Volts complete all as specified and directed.

Supply and fix switch socket combination flush type miultipurpose 5 in 1, 5/16 Amps, 230 Volts complete all as specified.

S&F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 X 50 mm complete all as specified.

S&F LED batten suitable for 9 W / 10 W with LED lamp along with integrated driver complete with 2 Nos roound blocks with necessary fixing arragements and connecting to the point wiring with necessary flexible copper conductor of multstrand three core of suitable length and size from fitting to the ceiling rore complete all as specified and directed.

S&F ceiling fan regulator step type AC 240 volt suitable for 1200/1400 sweep complete all as specified and directed.

S&F sheet metal enclosure, vertical type MCB DB TPN 4 way, double door, with 200 Amps rated bus bar 415 Volts, suitable for and including 100 Amp, TPN MCCB, 16 KA as incommer and 12 out going SP MCB's with magnetic locking system complete all as specified and directed. Note: MCBs SP shall be measured and paid separately.

S&F sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified and directed.

S&F MCB SP, 6-32 Amps, 230 Volts, 'C' curve, suitable for fixing in MCB DB's, 10KA breaking capacity, complete all as specified.

S&F MCB SP, 40-63 Amps, 240 Volts, 'C' curve, suitable for fixing in MCB DB's, 10KA breaking capacity, complete all as specified.

S&F MCB SPN, 40 Amps, 240 Volts, 'C' curve, suitable for fixing in MCB DB's, 10KA breaking capacity, complete all as specified.

S&F 45Watt recess softline luminaire (2x2) suitable for armstrong/grid ceiling with high brightness white LEDs and PMMA extruded diffuser giving glare free light and good aesthetic appeal and all as specified and directed

S & F Wall mounted LED batten suitable for 18W/ 20W with LED lamp along with integrated driver complete with 2 Nos round blocks with necessary fixing arragements and connecting to the point wiring with necessary flexible copper conductor of multristrand three core of suitable length size from fitting to the ceiling rose, complete all as specified and directed.

M&L for sub main wiring with two runs of single core 6 sq mm PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of medium grade of 25 mm dia including one run of single core 6 sq mm PVC insulated multistranded 1100 Volts grade copper conductor cable as earth continuity conductor alongwith the wiring and connected to common earth dolly including removing the existing unserviceable submain wiring and making good the disturbed surface to match with the existing surface complete all as specified and as directed. Note : 2 runs of 6 sq mm cable, one run of 6 sq mm earth continuity conductor and one run of conduit shall be measured as one unit length.

Disconnecting and removing ceiling fan of 1200/1400 mm sweep and wall mounted fan and exhauust fan from any height from electrical connections, bringing down, opening up, cleaning internally and externally , replacement of condensor, ball bearing, bushes, split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, replacement of minor worn out/defective parts, refixing in original position including minor repairs for smooth functioning and provision of new flexible wire of size 23 / 0.0076 multistranded copper conductor cable from ceiling rose to fan including testing on completeion all as specified and as directed. Note : (a) Replacement of unserviceable parts shall be measured and paid seperately. (b) PVC 2 core copper cable multistandrad of size 1.50 sqmm from ceiling fan deemed to be included in the rate quoted by the contractor (b) Labour element for replacing of unserviceable parts is deemed to be included in the rate quoted.

M&L for rewinding of the ceiling fan complete with equivalent new super enamelled copper wire of existing gauge and weight as per manufacturer's design and instructions including varnishing of ceiling fan of any make and any sweep complete all as specified and directed including taking out burnt copper wire complete all as specified and directed.

Supply only the following items at srl No. 106 to 108 suitable for ceiling fans / exhaust fans fo any size and sweep

(a) Capacitor 2.5 Mfd capacity 240 Volts

(b) Sealed ball bearing

(c) Rubber bushes

Earthing complete with galvanised steel earth plate electrode 60cmx 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nuts, checknuts and washers etc.,of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/main switch all as shown in Electrical Plate No.5 of SSR Part-I and connected to main switch board including excavation and earth work in hard dense soil, returning in and removal of surplus soil to a distance not exc 50m, PCC chamber in 1:2:4 Type B-1 using 20mm graded stone aggregate, 40mm thick RCC Cover in 1:2:4 type B-1 reinforced with XPM of weight not less than 4 Kg/Sqm and frame of angle iron 25 x 25 x 6 mm with lugs 2 Nos. and with 6mm dia MS bar handle made to shape, 20 mm dia light grade GI watering pipe perforated at bottom 1.75m long with funnel and wire mesh, common salt and charcoal filling, connection to test point made out of bronze/gun metal with fixing arrangement, funnel, wire mesh complete all as specified. Note: GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5m length is deemed to be included in quoted rate.

S&F Security lights of 1x30 watt LED light with high powered LED and unique peanut lens to ensure uniform distribution and including provision of 2.5 sqmm 3 core multistranded copper conductor cable from light fitting to juction box and bracket made out of GI pipe 40 mm dia bore not less than 1.2 mtr long and fixed on walls/poles with 2 nos MS clamps made out of MS flat 40x5mm thick complete with MS nuts, bolts and washers etc complete all as specified and directed.

Supply, laying, fixing on wall/on pole/in ground or passing through pipe, 1100 Volts grade heavy duty cable with XLPE insulation stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 3.5 core 35 sq mm nominal cross section including jointing and testing complete all as directed . Note: Excavation, earth work, GI Protection Pipe, PCC covers & sand shall be measured and paid separately under respective items.

Excavation in trenches not exc. 1.5 mtr wide and n.exc. 1.5 mtr in depth for foundations of man holes, laying of poles/stays/cable etc., n.exc. 10Sqm on plan and getting out in hard/dense soil complete all as specified and as directed

Supply, spread river sand of approval in cable trenches providing for cable cushioning as specified and directed. NOTE: Punned thickness of sand only will be measured and paid.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each in soils all as specified and as directed.

S& Lay PCC cable covers for LT cable protection, Class LV, Type 1 of size 250x150x40mm all as specified and as directed.

S & Lay GI tubing 40mm dia light grade in protection of cable at roads crossing/hard standing/pole proctection fixed with clamps as per site requirement etc all as specified and directed.

VENKATA PRABHAVATHI CONSTRUCTIONS

SAI RUPA CONSTRUCTIONS

PARDEEP AND CO

BEEGEE DESIGN SYSTEMS

ATUL ENTERPRISES

SAI RAM CONSTRUCTIONS

STANDARD AGENCIES