Renovation of the Secretariat Building at Moti Daman.(3rd call)

Amount

Civil work

Demolition including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift. (ii) In Cement Mortar.

Dismantling tiled of stone floors laid in mortar including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.

Dismantling wood work, wrought framed and fixed in frames trusses including stacking the materials with all lead and lift.

Dismantling steel work including distempering and stacking the materials with all lead and lift.

Dismantling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift. (i) Not exceeding 3 Sq.M. in area.

Dismantling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift. (ii) Exceeding 3 Sq.M. in area.

Dismantling sanitary fittings like wash basin . W.C. pan Indian and European type, flushing tank etc. including stacking the materials with all lead and lift.

Excavation for foundation in sand, gravel, clay soft soils and murrum etc. including shoring, strutting dewatering as necessary and disposing of the excavated stuff as directed. (A) Depth upto 3.0 M. and lead upto 100m for 10 Cum

Excavation for foundation in sand, gravel, clay soft soils and murrum etc. including shoring, strutting dewatering as necessary and disposing of the excavated stuff as directed. (B) Depth from 3.0 to 6.0 M.and lead upto 100m for 10 Cum

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering.

Disposal of remaining excavated Earth after filling in foundations and plinth as per direction of Engineer in-charge including loading from site and unloading at disposal site etc. complete. Lead upto 5.00 km

Filling in foundation and plinth with sand in layers of 20 cm. Thickness including watering ramming and consolidating etc. complete.

Carrying out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and material consistent with I.S.I specification. Using Chlordane and Chiorpurfiles 20 EC. As Per 6131_paret-II Concentration Weight one percent is recommended i.e. one litre 20 EC chemical emulsion with 19 litre give 1 % concentration inclusive of one litre chemical emulsion application at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S

Providing and filling rubbles including hand packing and filling voids with sand as directed including ramming and consolidating etc. complete.

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts All Floor

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in Tie Beams/ Beams/ Lintel/ Coping at All Floor Slab Level

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in Slab at All Floor Slab Level

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in RCC Walls at All Floor

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in Staircase at All Floor

Providing Thermo Mechanically Treated bar (T.M.T.) (I.S.I. Mark) conforming to I.S. - 1786 Fe-500D CRS Steel including providing fusion bonded Epoxy coating not less than 175 micron thickness and up to 300 micron to reinforcement bars as per IS-13620- 1993/ ASTM-775M. for R.C.C. work including bending, binding and placing in position complete.

Providing and fixing in expansion joint 100 mm thick SIL FLEX (Capcell HD 100) expansion joint board of best quality and approved make including cutting to required size and shape at all levels etc. complete as directed.

Applying and providing Expansion joint sealing System on 100 mm vide joint including cleaning of expansion joint by mechanical means provision of adhesive and flexible membrane with required bond length as per manufacturer specification and 4mm thick aluminium strip covering with one side slotted and bolted with suitable system, inclusive of all manpower, machinery and material as per specification and as directed.

Providing and filling the expansion joint by Thioflex 600 polymer or equivalent confirm to BS 4254-1983 as per required shade and manufactured specific-cation by making groove of 50 mm x 12.5 mm lather by cutting or by repairing groove and removing mortar drop or any other foreign materials including applying primer and filling required size (oversize of joint PU foam etc. complete.

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B) Conventional All Floor (below/above Plinth)

Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-coarse sand ) with 2 Nos of 6mm Mild steel round bars after every three course embedded in Cement Mortar (B) Conventional All Floor

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate and have a provision of G.I. Anchor fasteners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/ m²), consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²).The Frame and Shutter duly filled mineral wool insulation having density min 96 kg/ m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge

Providing and fixing 38 mm thick Double Shutter Flush Doors using Powder Coated Aluminium Section for frame equivalent to Jindal door sections Delux Series having weight not less than 1.2 kg / mt. with wooden inserts for durable grip of door hinges. (Frame size 38 mm x 63.5 mm), having BWP Shutters with both size Decorative 1 mm thick Laminate fixed with waterproof adhesives having pattern and design as approved by the Architect, with Stainless Steel Handles, Tower Bolt (Door Stopper) & Heavy Stainless steel Aldrop including fixing of all other accessories as per detailed drawing / as directed by Engineer In-charge etc. Complete.

Providing, Fabricating and fixing Steel Works in required pattern/ design for Gates/ Grills/ Sheds etc. using Structural Steel Hollow Sections as per details / drawings/instructions including cutting, bending, jointing, connecting, welding and / bolting and / riveting and fabricating and erecting in position etc. complete for all levels as directed . The rate to include all necessary fixtures, fastening including one coat of primer and two coats of mat finished oil painting etc. complete.

Providing and fixing M.S. grills / Gates of required pattern to brick walls / Columns prepared with M.S. flats, angles, Square / round bars, square pipes, at required spacing with necessary hold fasts as per detailed drawing and fixing brick walls / coping / columns etc. complete including painting two coat & applying primer coat. (A) Ornamental Grill

Providing and laying Mirror polished Granite slab 18-20 mm (Average) thick for Doors / Windows sill & Jams Cladding as per design incl. full moulded round both edge on 10 mm thick cement mortar 1:3 (1 -cement : 3 coarse sand ) jointed with grey cement slurry including rubbing and polishing etc. complete

Providing and laying Machine Polished, Machine Cut, Free Edge Granite stone slab 20 mm thick for Flooring as per Architect's Design/Colour/Pattern/Finish (Basic Rate of ₹ 3000/Sq.M) incl. laid on 20 mm thick cement mortar 1:6 (1 -cement : 6 coarse sand) and jointed with grey cement slurry including rubbing, grooving and polishing etc. complete

Providing and laying Machine Polished, Machine Cut, Free Edge Granite stone slab 18 mm thick (Basic Rate of ₹ 3000/Sq.M) for Skirting on 10 mm thick cement Plaster 1:3 (1 -cement : 3 coarse sand) jointed with grey cement slurry including rubbing, grooving and polishing etc. complete

Providing and laying Machine Polished, Machine Cut, Free Edge Granite stone slab 18 mm thick {Single piece not more than 150 cm long} (Basic Rate of ₹ 3000/Sq.M) for stair steps and riser as per design incl. rounded Moulding front edge in trade of steps laid on 20 mm thick cement mortar 1:6 (1 -cement : 6 coarse sand) and Riser on 10 mm thick cement Plaster 1:3 (1 -cement : 3 coarse sand )jointed with grey cement slurry including rubbing, grooving and polishing etc. complete

Providing and laying 120 cm x 60 cm MATT Vitrified Tiles (Basic Rate of ₹ 1000/Sq.M) flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismantling of existing flooring and jointed with colour cement slurry including finished with flush pointing & cleaning the surface and including filling the joints with Approved Epoxy Grout in 3-4 mm width and 10 mm Depth including cost of PVC Spacers, Rubbing, Cleaning etc. complete.

Providing and laying 120 cm x 60 cm MATT Vitrified Tiles (Basic Rate of ₹ 1000/Sq.M) 8 mm thick of approved shade in skirting, risers of steps and dado on 10 mm thick cement plaster 1:3 (1 Cement : 3 coarse sand) and jointed with white cement slurry including filling the joints with Approved Epoxy Grout in 3-4 mm width and 10 mm Depth including cost of PVC Spacers, Rubbing, Cleaning etc. complete.

Providing and laying Mangalore Tiles of approved or equivalent brand, Size, Colour, shade and Pattern for Roofing over 20 mm {average} base of cement mortar 1:6 { 1 cement : 6 coarse sand} and mixing Waterproofing Material in Cement Mortar as recommended by manufacturer and engineer in-charge including finished with flush pointing & cleaning the surface etc. complete

Providing and fixing Cobble Stone Paving as per design and pattern approved by Architect and Engineer In-Charge mechanically pressed including 75 mm Sand layer for levelling and filling the joint with sand in proper line and level etc. complete.

Providing and Fixing 1.2 m high M S Railing on Ramp as per design of Architect and Instruction of Engineer in-Charge including fabrication, Painting with Zinc chromate and 3 coats of enamel Paint of approved make etc. complete.

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge etc. complete.

Providing and laying broken china- mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using white cement including rounding off junctions and extending them upto 15 cm along the wall, clearing with water and oxalic acid etc. as directed.

Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet fixed with Hilti screw and rubber silicon sealer and aluminium strip of size 50 x 3 mm etc. complete as directed by Engineer in charge.

Providing and Fixing GRC Cornice having compressive strength of 35-55 MPA and Flexural Strength of 6-16 MPA as per approved design, colour, Finish by Architect and Engineer in-Charge including Packing, Transporting, Unloading, fixing at Site etc. complete.

Providing and Fixing GRC Rectangular Half Columns having compressive strength of 35-55 MPA and Flexural Strength of 6-16 MPA as per approved design, colour, Finish by Architect and Engineer in-Charge including Packing, Transporting, Unloading, fixing at Site etc. complete.

Providing and Fixing GRC Square Corner Columns having compressive strength of 35-55 MPA and Flexural Strength of 6-16 MPA as per approved design, colour, Finish by Architect and Engineer in-Charge including Packing, Transporting, Unloading, fixing at Site etc. complete.

Providing and Fixing GRC Round Columns having compressive strength of 35-55 MPA and Flexural Strength of 6-16 MPA as per approved design, colour, Finish by Architect and Engineer in-Charge including Packing, Transporting, Unloading, fixing at Site etc. complete.

Providing and Fixing GRC Screens having compressive strength of 35-55 MPA and Flexural Strength of 6-16 MPA as per approved design, colour, Finish by Architect and Engineer in-Charge including Packing, Transporting, Unloading, fixing at Site etc. complete.

Providing and Fixing GRC Carving Motif in Triangle having compressive strength of 35-55 MPA and Flexural Strength of 6-16 MPA as per approved design, colour, Finish by Architect and Engineer in-Charge including Packing, Transporting, Unloading, fixing at Site etc. complete.

Providing and Fixing Fabricated Structural Supporting Structure for GRC Works as per approved design by Architect and Engineer in-Charge including fabricating, transporting, painting etc. complete.

Providing and Fixing Scaffolding as working platform for working at height with approved grade of Steel including cutting, fabricating, assembling and removal from site after completion of work etc. complete.

Providing 15 mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Ground Floor

Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling and soffits of stairs upto floor two level and finished even and smooth in : (I) Cement mortar 1:3 (1 cement : 3 sand) Ground Floor

Providing 20 mm thick double coat mala cement plaster on exterior brick/ concrete work for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement plaster 1:2 (1 cement : 2 Coarse Sand) finished with trowel including scaffolding curing etc. Complete.

Applying two coats of Birla or Asian acrylic lappy (putty) and two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required Texture and Shade as per approved Architectural Elevation after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials etc. complete

Providing and fixing chicken mesh jali with square of 12.50 x 12.50 mm of 25 gauge at junction the Brick Masonry and reinforcement cement concrete member including fixing materials scaffolding labour etc. complete

Providing 12 mm wide groove / notch in plaster including finishing the same etc. complete for all height.

Providing cement vata ( 10 cm x 10 cm size ) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. complete.

Constructing Sandwich Platform of 18 mm thick Polished Black Granite at top and 30 mm thick Kota stone slab flooring fitting at bottom with cementing Materials / adhesives including making necessary grooves in walls including all labour material of approved quality incl. full moulded round front edge fixed in wall for partition and jointed with grey cement slurry including rubbing and polishing etc. complete

Providing and fixing bevelled edge mirror of superior glass mounted on 6 mm thick plywood sheet and having Batten frame of Indian Teakwood fixing to wooden plugs with C.P. brass screws and washers as directed by Engineer In-charge etc. complete.

CC Road Works: Box cutting the road surface to proper slope and camber for making a base of road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 mts, lead.

Providing and laying W.B.M. of B.T.M.C. metal of size 45 mm to 63 mm size including 20% Grit {Stone screening} & stone dust as filler including spreading, watering & consolidation by vibratory roller 80KN to 100KN static weight.

Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with concrete grade M300, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with conventional method, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing

Curtain Wall Glazing: Design, Fabrication, Supply, Installation, Protection, Cleaning & Handover of Curtain Wall glazing system with microwave cured EPDM gaskets, weather sealants of GE / Dow Corning make, baker rod, Bracketing system with MS hot dip galvanized brackets designed to accommodate three dimensional movements with washers, GI grade fasteners and anchor bolts , nylon separators to prevent bi-metallic contacts, flashings to seal the gaps between curtain wall and the building structure all complete required to perform as per specification and drawing in conjunction with BOQ. The quote rate shall include all design & shop drawing approval from architect & consultant. Curtain Wall glazing system:

Curtain Wall Glazing: Design, Fabrication, Supply, Installation, Protection, Cleaning & Handover of Curtain Wall glazing system with microwave cured EPDM gaskets, weather sealants of GE / Dow Corning make, baker rod, Bracketing system with MS hot dip galvanized brackets designed to accommodate three dimensional movements with washers, GI grade fasteners and anchor bolts , nylon separators to prevent bi-metallic contacts, flashings to seal the gaps between curtain wall and the building structure all complete required to perform as per specification and drawing in conjunction with BOQ. The quote rate shall include all design & shop drawing approval from architect & consultant. VISION & SPANDREL GLASS: 24 mm DGU: Providing and fixing vision glass 6 mm Thk. Reflective HS Glass + 12 mm Air Gap + 6 mm Clear Toughened Glass (As per Client / Architect Approval sample)

providing and fixing the spandrel panel with the Glass wool insulation of 50mm thick 48 kg/m3 density slab with inbuilt black veil of 0.65mm firmly held on the GI tray of 0.8mm thk. The assembly is kept at least 50mm away from the glass surface.

Providing and fixing Top Hung Open Out (operable) vent accessories with heavy duty self balancing stainless steel friction hinges with provision to hold open at 250 mm. Vent locking accessories with cremone lock and handle with 4 point locking mechanism to keep the vent weather tight. The vent shall comprise of Aluminium outer frame with drainage provisions and shutter frame with Euro grooves and all joints shall be sealed with small joint sealant. The outer frame fixed to the profile system with necessary SS screws and weather sealant applied at outside and inside of profile duly Super Durable Powder coating finish of 60-80 micron thickness as per Approved shade by Architect. The stepped glass design vent shall have ceramic frit in black / colour to match the glass at the portion of the stepped unit in case of high light transmission glass to reduce banding effect in the glazing.

Providing and fixing Horizontal Alum. Fin (size: 50 x 120 mm Depth Bull-Nose Type) duly held on Al. pressure plate fixed rigidly to the Mullion with necessary fasteners in SS 304. The capping shall be made out of extruded Aluminium Alloy 6063-T5 grade & All visible surfaces shall have Super Durable Powder coating finish of 60-80 micron thickness as per Approved shade by Architect .Location of the capping shall be as per drgs.

SANITARY :- Supply, checking, storing and fixing S. S. sink, single bowl with tap point on wall / counter comprising of Concealed type brackets fixed to wall with adjustable clamp to push against counter rim,40 mm heavy plated C.P. waste coupling fitting JAQUAR-ALD-CHR-705 or Equivalent with or without pop-up,40 mm heavy plated C.P. bottle trap Model No. JAQUAR-ALD-CHR-769L300*190 or Equivalent with cleaning eye with extension piece and wall flange,CP Painting brackets with two coats of white enamel paint over one coat of primer,15 mm sink Faucet(swan neck) Model No.Jaquar-FLR-CHR-5309NGD or Equivalent table mounted / wall mounted. Kitchen sink with drain board)(model Nirali-olympia-bigor equivalent)

Supply, checking, storing and fixing in position European water closet comprising of Wall hung European W.C. Pan Model ARIA-ARS-WHT-3995 or Equivalent in white colour, on approved type of chairs,Concealed flushing cistern Model No.Geberit Omega Concealed Cistern with Flush plate or Equivalent or Equivalent as directed,C.P health faucet Model No. JAQUAR-ALD-CHR-573GD or Equivalent with required length of flexible tube, clamp and bracket for fixing to wall,15 mm C.P. brass heavy quality angle stop cocks Model No.JAQUAR-OPP-CHR-15053PM or Equivalent for flushing cistern,C.P. brass 2-way bib cock Model No. JAQUAR-OPP-CHR-15041PMGD or Equivalent,CP Toilet paper holder Model JAQUAR-ACN-CHR-1153S or Equivalent, Solid Bakelite water closet cover and seat with C.P. hinges and rubber buffers, Fixing W.C. unit with brackets and accessories in position, Necessary pipe connection to PVC / PP / CI soil pipe, Painting bracket with two coats of white enamel paint over a coat of primer.

Supply, checking, storing and fixing Under Counter wash hand basin(Secretary) Model No. JAQUAR-PRS-132530 or Equivalent with ,32 mm heavy plated C.P. waste coupling fitting Model No. JAQUAR-ALD-CHR-705 or Equivalent with pop-up,32 mm heavy plated C.P. bottle trap Model No.JAQUAR-ALD-CHR-769L300*190 or Equivalent with cleaning eye with extension piece and wall flange, Painting brackets with two coats of white enamel paint over one coat of primer,CP Basin Faucet Model No.JAQUAR-SNRCHR-51011GE or Equivalent with 15 mm C.P. brass heavy grade flexible inlet connection with C.P. nut (minimum length 450 mm) made to measure.

Supply, checking, storing and fixing Under Counter wash hand basin (General Toilet)Model No. JAQUAR-FNS-WHT-40701 or Equivalent with ,32 mm heavy plated C.P. waste coupling fitting Model No. JAQUAR-ALD-CHR-705 or Equivalent with pop-up,32 mm heavy plated C.P. bottle trap Model No.JAQUAR-ALD-CHR-769L300*190 or Equivalent with cleaning eye with extension piece and wall flange, Painting brackets with two coats of white enamel paint over one coat of primer,CP Basin Faucet Model No.JAQUAR-SNRCHR-51011GE or Equivalent with 15 mm C.P. brass heavy grade flexible inlet connection with C.P. nut (minimum length 450 mm) made to measure.

Supply, Checking, Storing and fixing vitreous Large flat back urinals Model No. JAQUAR-URS-WHT-132530 or Equivalent with Conceal automatic flushing system Model No. JAQUAR-SNR-CHR-51097G or Equivalent in white colour with concealed type wall hanger or special bracket in wall and hinged type C.P. dome gratings. C.P. flush pipes from auto flush, spreaders, full bore inlet caps as necessary made to measure. C.P. waste pipe and Spreader under each urinal pan, leading to the CP bottle trap Model No.JAQUAR-ALD-CHR-769L300*190 or Equivalent below and painting with two coats of white enamel paints and cutting and making good the walls wherever require.

Supply, checking, storing & fixing C.P. brass towel ring Round Model No. JAQUAR-ACN-CHR-1121Bn or Equivalent to PVC cleats with C.P. brass screws including cutting and making good the walls wherever required .

Supply, checking, storing & fixing manual CP soap dispenser Model No. JAQUAR-ACN-CHR-1135N or Equivalent with liquid soap (including one time soap fill) including cutting and making good the walls, wherever required complete as per instructions of the engineer-in-charge.

Supply, checking, storing & fixing C.P. brass angle valve for basin & Sink Model No. JAQUAR-CON-CHR-053KN or Equivalent of approved quality conforming to IS:8931 for a) 15mm Nominal Bore

Supply, checking, storing & fixing C.P. brass bib cock Model No Jaquar-FUS-CHR-29037 or Equivalent of approved quality conforming to IS:8931. a) 15mm Nominal Bore

Supply, checking, storing & fixing straight/offset type Macfit single body push fit type WC Pan Connector Jaquar-ZPS-WHT-VB01 or Equivalent with factory supplied spring loaded seal guard with integrated single mould sealing fins made of flexible EVA Body, including bush/adaptor for use with CI Pipe as supplied with Pan Connector (For European water closet)

Supply, Installation , testing and commissioning of Soft Close Seat Cover Model No. JAQUAR-WAC-SAP-BR0600CS or Equivalent for handicap toilet complete as recommended by the E-I-C.

Supply , Installation , testing and commissioning of wall Mounted Hinged rail Model No. JAQUAR-WAC-SAP-BAI090CS or Equivalent for handicap toilet complete as recommended by the E-I-C.

Supply, Installation , testing and commissioning of Grab bar 600mm long Model No. JAQUAR-WAC-SAP-BR0600CS or Equivalent for handicap toilet complete as recommended by the E-I-C.

Supply, Installation, testing and commissioning of approved quality, 150x150mm SS304 Floor clean out plug Model No. Chilly-CO-R-128-GF or Equivalent in common toilet as per approved Drawing And as per direction of EIC.

Receiving, checking, storing & fixing Stainless Steel Body Auto hand drier Model No . Jaquar-HDR-SAP-M99ACS to be operated with 220 volts, single phase, with fully hygienic condition, with all accessories including cutting and making good the walls, wherever required complete as per instructions of the engineer-in-charge.

Installation testing and commissioning self contained pressure type water coolers suitable for operation on 230 voltage - 10% single phase AC supply and generally confirming to the requirements of IS :1476/78 having following nominal cooling capacity at an ambient temperature of 30 deg.c and drinking water inlet temperature of 35 deg c and drinking water outlet temperature of 13.5 deg. complete with compressor over head protector, thermostat and steel tank. 40 Ltr. Cooling and 80 Ltr Storage. Cap.(Make: Voltas,Blue Star,Usha)

Drinking Water RO - Providing & fixing Wall Mounted RO plant with UV Technology I.S.I marked,C.P brass push cock, inlet float valve with all plumbing and electrical accessories, inlet, outlet, overflow and PVC drain out connection. Flow-2 LPM(Make:Aquaguard,Eureka Forbes,Kent)

SOIL WASTE AND VENT PIPE :- Supply, Installation, testing and commissioning of Silent soil & waste pipes of PP(Polypropylene) material As per EN 12056 with Min. density 1.2 g/cm3 with mineral wool (for noise reduction) with push fit lock seal joints, with necessary fittings such as making proper connections to equipments including all necessary fittings and specials such as bends, tees, reducers,,Wye , Door tee , Vent cowl, Access pipe for cleaning in required interval(on service floor & basement) ,nuts,bolts,gaskets,supports and plugs etc. Fixing at wall/ ceiling level supported by clamps, fire collars, expansion joints,Y branches, hangers etc. as per the specification, drawings and schematics. All hangers, clamps, brackets, anchor/fixed support,guides,rollers etc. shall be of galvanized iron unless specified otherwise and then supply and installation of the same shall also be excluded for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted.(The pipe length inserted in the fitting shall not be measured for payment) (Pipes for soil , waste for internal toilet).(Make:Astral,Ahirvad,Suprime) 40 mm

Supply, Installation, testing and commissioning of Silent soil & waste pipes of PP(Polypropylene) material As per EN 12056 with Min. density 1.2 g/cm3 with mineral wool (for noise reduction) with push fit lock seal joints, with necessary fittings such as making proper connections to equipments including all necessary fittings and specials such as bends, tees, reducers,,Wye , Door tee , Vent cowl, Access pipe for cleaning in required interval(on service floor & basement) ,nuts,bolts,gaskets,supports and plugs etc. Fixing at wall/ ceiling level supported by clamps, fire collars, expansion joints,Y branches, hangers etc. as per the specification, drawings and schematics. All hangers, clamps, brackets, anchor/fixed support,guides,rollers etc. shall be of galvanized iron unless specified otherwise and then supply and installation of the same shall also be excluded for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted.(The pipe length inserted in the fitting shall not be measured for payment) (Pipes for soil , waste for internal toilet).(Make:Astral,Ahirvad,Suprime) 75 mm

Supply, Installation, testing and commissioning of Silent soil & waste pipes of PP(Polypropylene) material As per EN 12056 with Min. density 1.2 g/cm3 with mineral wool (for noise reduction) with push fit lock seal joints, with necessary fittings such as making proper connections to equipments including all necessary fittings and specials such as bends, tees, reducers,,Wye , Door tee , Vent cowl, Access pipe for cleaning in required interval(on service floor & basement) ,nuts,bolts,gaskets,supports and plugs etc. Fixing at wall/ ceiling level supported by clamps, fire collars, expansion joints,Y branches, hangers etc. as per the specification, drawings and schematics. All hangers, clamps, brackets, anchor/fixed support,guides,rollers etc. shall be of galvanized iron unless specified otherwise and then supply and installation of the same shall also be excluded for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted.(The pipe length inserted in the fitting shall not be measured for payment) (Pipes for soil , waste for internal toilet).(Make:Astral,Ahirvad,Suprime) 110 mm

Supply, Installation, testing and commissioning of Silent soil & waste pipes of PP(Polypropylene) material As per EN 12056 with Min. density 1.2 g/cm3 with mineral wool (for noise reduction) with push fit lock seal joints, with necessary fittings such as making proper connections to equipments including all necessary fittings and specials such as bends, tees, reducers,,Wye , Door tee , Vent cowl, Access pipe for cleaning in required interval(on service floor & basement) ,nuts,bolts,gaskets,supports and plugs etc. Fixing at wall/ ceiling level supported by clamps, fire collars, expansion joints,Y branches, hangers etc. as per the specification, drawings and schematics. All hangers, clamps, brackets, anchor/fixed support,guides,rollers etc. shall be of galvanized iron unless specified otherwise and then supply and installation of the same shall also be excluded for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted.(The pipe length inserted in the fitting shall not be measured for payment) (Pipes for soil , waste for internal toilet).(Make:Astral,Ahirvad,Suprime) 160 mm

Pipes for soil , waste , Rain , Vent for Shaft /External Area 75 mm

Pipes for soil , waste , Rain , Vent for Shaft /External Area 110 mm

Pipes for soil , waste , Rain , Vent for Shaft /External Area 160 mm

Supply , installation , testing and commissioning Polypropylene (PP) 110 mm x 110 mm size P trap (Floor trap) of self cleaning design with Min. 50mm water seal with and without vent arm jointing with push fit rubber ring socket fittings complete, cutting chases / hole in floors / slabs and bringing the same in proper condition and shape after placing the trap in right position in case of suspended / open plumbing or setting the trap in 1:2:4 CC in case of concealed plumbing , etc. complete, as required. The trap shall be of following sizes: Temporary airtight PVC cover to be provided to prevent dirt entry.(Make:Astral,Ahirvad,Suprime)

Supply , installation , testing and commissioning Polypropylene (PP) 110 mm x 75 mm size Multi floor trap of self cleaning design with Min. 50mm water seal with and without vent arm jointing with push fit rubber ring socket fittings complete, cutting chases / hole in floors / slabs and bringing the same in proper condition and shape after placing the trap in right position in case of suspended / open plumbing or setting the trap in 1:2:4 CC in case of concealed plumbing , etc. complete, as required. The trap shall be of following sizes: Temporary airtight PVC cover to be provided to prevent dirt entry. ( In shaft )(Make:Astral,Ahirvad,Suprime)

Supply , installation , testing and commissioning of Polypropylene (PP) OR PVC 75 mm Nahani Trap in shaft connect to waste line with reducing elbow & nipple cutting chases, the floor/slab, repairs complete as required and connection to waste pipe.(Make:Astral,Ahirvad,Suprime)

Supply , installation , testing and commissioning rain water Sidewall Parapet CI Body With Aluminium Grate With 4 SS Screw Drains ,size as per drawing required depth with Making Khurra with Proper water proofing and fixing the fittings (Horizontal/vertical arrangement grating) complete as required.(Make:Neer,Weimer) 300x 300 mm (75 mm outlet pipe dia )

Supply , installation , testing and commissioning rain water Sidewall Parapet CI Body With Aluminium Grate With 4 SS Screw Drains ,size as per drawing required depth with Making Khurra with Proper water proofing and fixing the fittings (Horizontal/vertical arrangement grating) complete as required.(Make:Neer,Weimer) 450x 450 mm (150mm outlet pipe dia )

Providing and fixing S.W. gully trap with Each C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B) 150mm x 1 OOmm size P or R Type

INTERNAL WATER SUPPLY :- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. For Cold Water Lines ( Domestic ) (Inside Toilet)(Make:Astral,Ashirvad,Finolex) 15 mm nominal outer dia Pipes ( SDR 11 )

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. For Cold Water Lines ( Domestic ) (Inside Toilet)(Make:Astral,Ashirvad,Finolex) 20 mm nominal outer dia Pipes ( SDR 11 )

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. For Cold Water Lines ( Domestic ) (Inside Toilet)(Make:Astral,Ashirvad,Finolex) 25 mm nominal outer dia Pipes ( SDR 11 )

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. For Cold Water Lines ( Domestic ) (Inside Toilet)(Make:Astral,Ashirvad,Finolex) 32 mm nominal outer dia Pipes ( SDR 11 )

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. For Cold Water Lines ( Domestic ) (Inside Toilet)(Make:Astral,Ashirvad,Finolex) 40 mm nominal outer dia Pipes ( SDR 11 )

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. For Cold Water Lines ( Domestic ) (Inside Toilet)(Make:Astral,Ashirvad,Finolex) 50 mm nominal outer dia Pipes ( SDR 11 )

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC high bonded solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(The pipe length inserted in the fitting shall not be measured for payment) For Cold Water Lines (Inside Shaft & Terrace & Riser)(Make:Astral,Ahirvad,Finolex) 65 mm nominal outer dia Pipes ( SCH 80 )

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC high bonded solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(The pipe length inserted in the fitting shall not be measured for payment) For Cold Water Lines (Inside Shaft & Terrace & Riser)(Make:Astral,Ahirvad,Finolex) 80 mm nominal outer dia Pipes ( SCH 80 )

Providing and fixing forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finish with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc. complete in all respect.(Make:Sant,Zoloto,leader) 20 mm dia

Providing and fixing forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finish with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc. complete in all respect.(Make:Sant,Zoloto,leader) 25mm dia

Providing and fixing forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finish with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc. complete in all respect.(Make:Sant,Zoloto,leader) 32 mm dia

Providing and fixing forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finish with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc. complete in all respect.(Make:Sant,Zoloto,leader) 40 mm dia

Providing and fixing forged brass lever operated ball valve of full flow with forged brass ball (Machined to mirror smooth finish with hard chrome plated) and spindle with setting and gland of superior quality having minimum working pressure of 16 kg/cm2 etc. complete in all respect.(Make:Sant,Zoloto,leader) 50mm dia

Supplying, fixing, testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.(Make:Sant,Zoloto,leader) BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. 80 mm dia.

Supplying, fixing, testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.(Make:Sant,Zoloto,leader) BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. 65 mm dia.

Providing and fixing Forged Brass Air release valve, double acting, of approved make, having 2 chambers with ebonite ball, small and large orifices with isolating stop screw down valve, GM seats, high tensile brass spindle with cap, conforming to standard water works pattern. Flanges as per IS : 15381, flat faced and drilled, complete of the following nominal bore (NB) size: 25 mm (Make:Castle,Zoloto,leader)

Providing and fixing Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for cold / hot water circulation including insulation as specified.(Make:Sant,Zoloto,leader) 80 mm dia.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All Kind of Soil Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia.

Providing and fixing Water level indicator for water tanks mounting in panel with level display, alarm (level low or high), and manual reset for alarm, potential free set point contacts etc. complete with electrical wiring to probes and all accessories complete the work. Provision to connect to the building Automation system or pump controller through a suitable port.

Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 80 mm dia nominal bore

Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 (Make:Sant,Zoloto,leader) 80 mm dia

Providing & laying UPVC pressure pipes of 10Kg/Sq.cm pressure rating class V (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead up to 100m complete, compaction and consolidation Including sand bedding all around UPVC pipe & fittings and thrust blocks at bends as per standard design. (For Garden Hydrant System)(Make:Astral,Ahirvad,Finolex) 25 mm outer dia

Providing & laying UPVC pressure pipes of 10Kg/Sq.cm pressure rating class V (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead up to 100m complete, compaction and consolidation Including sand bedding all around UPVC pipe & fittings and thrust blocks at bends as per standard design. (For Garden Hydrant System)(Make:Astral,Ahirvad,Finolex) 50 mm outer dia

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : (For Garden Hydrant System) (Make:Sant,Zoloto,leader) 25 mm dia

EXTERNAL SEWERAGE & STROM DRAINAGE :- Providing, laying, jointing and testing heavy quality DWC (Double wall Corrugated ) under ground application pipes for Sewer and storm line with Snap-Fit Coupler with Rubber Ring / In-line Socket Moulded Coupler / Socket-Spigot Arrangement fittings of SN8 class of approved make laid to required alignment and slope trenches inclusive of excavation in all soil types, bailing or pumping out water from trenches, shoring, whenever necessary testing, refilling, in layers, ramming & consolidation, removing away the surplus earth & spoils, dumping it on site or carting away to lead of 100 meters as directed incl. (Make:Astral,Ahirvad,Suprime) 150 mm dia

Providing, laying, jointing and testing heavy quality DWC (Double wall Corrugated ) under ground application pipes for Sewer and storm line with Snap-Fit Coupler with Rubber Ring / In-line Socket Moulded Coupler / Socket-Spigot Arrangement fittings of SN8 class of approved make laid to required alignment and slope trenches inclusive of excavation in all soil types, bailing or pumping out water from trenches, shoring, whenever necessary testing, refilling, in layers, ramming & consolidation, removing away the surplus earth & spoils, dumping it on site or carting away to lead of 100 meters as directed incl. (Make:Astral,Ahirvad,Suprime) 200 mm dia

Providing, laying, jointing and testing heavy quality DWC (Double wall Corrugated ) under ground application pipes for Sewer and storm line with Snap-Fit Coupler with Rubber Ring / In-line Socket Moulded Coupler / Socket-Spigot Arrangement fittings of SN8 class of approved make laid to required alignment and slope trenches inclusive of excavation in all soil types, bailing or pumping out water from trenches, shoring, whenever necessary testing, refilling, in layers, ramming & consolidation, removing away the surplus earth & spoils, dumping it on site or carting away to lead of 100 meters as directed incl. (Make:Astral,Ahirvad,Suprime) 250 mm dia

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes /UPVC /DWC Pipes including bed concrete as per standard design a)150 mm dia

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes /UPVC /DWC Pipes including bed concrete as per standard design b)200 mm dia

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes /UPVC /DWC Pipes including bed concrete as per standard design c)250mm dia

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(E) 450mm (upto 10 ton)

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20 mm nominal size) foundation concrete 1 :3:6 mix ( 1-cement 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar "1 :5 ( 1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 :2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20 mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick masonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1 :5 (1-Cement: 5-Coarse sand) (1) A type depth 0.90 Metre for 150mm diameter sewer.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20 mm nominal size) foundation concrete 1 :3:6 mix ( 1-cement 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar "1 :5 ( 1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 :2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20 mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick masonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1 :5 (1-Cement: 5-Coarse sand) (1) B type depth 1.50 Metre for 150mm diameter sewer.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20 mm nominal size) foundation concrete 1 :3:6 mix ( 1-cement 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar "1 :5 ( 1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 :2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20 mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick masonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1 :5 (1-Cement: 5-Coarse sand) (1) C type depth 2.25 Metre for 150mm diameter sewer.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20 mm nominal size) foundation concrete 1 :3:6 mix ( 1-cement 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar "1 :5 ( 1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 :2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20 mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick masonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1 :5 (1-Cement: 5-Coarse sand) (II) Extra rate for constructing B.B. masonry for every additional depth of 0.1 M. GR Part thereof over item No.24.27 (I) for depth from 1.50M. to 2.25M.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20 mm nominal size) foundation concrete 1 :3:6 mix ( 1-cement 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar "1 :5 ( 1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 :2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20 mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick masonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1 :5 (1-Cement: 5-Coarse sand) (Ill) Extra rate for constructing B.B. masonry for every additional depth of 0.1 M. or Part thereof over item No. 24.27 (Ill) for depth from 2.25M to 3.15M.

Providing and fixing cast iron steps of size 500mm x 150mm x 22.Smm and painting with two coats of Anti-corrosive paint etc complete.

Supplying and fixing C.I. cover 300mm x 300mm without frame for Gulley trap (Standard pattern) the weight of cover to be not less 4.53 Kg.) (upto 10 ton)

Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including 500mm x 450mm C.I. horizontal grating with frame complete. (upto 10 ton)

Constructing Brick masonry road gully chamber 450mm x 450mm x 775 mm with vertical gating complete.

Constructing brick masonry road gully chamber 11 OOmm x 775 mm including 500mm x 450mm (C.I. horizontal grating with frame and vertical grating complete.) (upto 10 ton)

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crashing strength not less than 35Kg. Cm2 in C.M. 1 :5 C. I. cover with frame (Light duty) 455mm x 610mm internal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slab with 1 :2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20 mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1 :3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two inlets. (upto 10 ton)

Extra over items 24.44 for every additional depth of 0.1 M. of part thereof beyond 450mm depth for Brick masonry chamber.(ii) for 500mm x 700 mm size.

Supply , Installation , testing and commissioning of FRP (Fiberglass Reinforced Polymer) Manhole cover with frame design as per EN 124 Standard Class Load in removable sections with matching frames of MS angles or making a similar size of offset in floor trimix / concrete, over open channel / chamber as per the drawings and designs and approved by architect and testing of joints complete as per direction of Engineer in Charge. (Basement & ground Civil drain line ).(Make:Everlast,Tharmodrain,HP) 600mm Dia round Cover Underground tank water tight (2.5 ton Load)

Supply , Installation , testing and commissioning of FRP (Fiberglass Reinforced Polymer) Manhole cover with frame design as per EN 124 Standard Class Load in removable sections with matching frames of MS angles or making a similar size of offset in floor trimix / concrete, over open channel / chamber as per the drawings and designs and approved by architect and testing of joints complete as per direction of Engineer in Charge. (Basement & ground Civil drain line ).(Make:Everlast,Tharmodrain,HP) 600mm Dia Square Cover Over Head tank (500kg Load )

Supply , Installation , testing and commissioning of Modular type Recharge wells with considering below line item : Drilling of Recharge wells: The Recharge well will be 10“diameter with depth of 50 Mtr. Injection well insertion pipes: UPVC Pressure Pipe (IS-4985-2000 ) 6” diameter having a load capacity of 10 kg/ sq.cm. ( 20 Mtr ). Injection well insertion slotted bore well pipes 6" for clog resistant of rain water and reducing possibility of carrying solid. (35 mtr ). Solvent & Screws, Clamps, Bell Plug, End Caps and Bentonite for development of recharge well. ( 1 LOT ). Gravel filling for packing of empty space in the bore for stability to the inserted pipes. ( 5 Cum ). Earth work excavation with JCB/ excavators in all type of soil. (150 cum ). Dressing of pits excavated in step for installation purpose inside and Compaction. ( 50 cum ). Material for preparation of Pit base (gravel/stone chips and river sand) (20 cum ). Backfilling of Excavated soil with levelling. ( 100 cum ). Disposal of Soil up to 0.5 KM from the site. ( 50 cum ). Supply of long fiber Geotextile of weight 400gsm/sqm, type tested as per relevant international standards for tear, tensile strength, elongation %, puncture and percolation parameters, to act as a filter medium, including overlapping at joints and welding with extrusion welder etc. complete as per approved design. ( 150 Sqm ). Providing in position recycled co-polymer modular Rain water harvesting structure with required number of large plate (685*410 mm, weight not less than 850 Gram ) and small plate (430*410 mm, weight not less than 535 Gram) with +-1% so as to ensure 96 % void volume ratio fixed in arrangements as per specified pattern/design. Four Plate (Small) configuration. Material used is 100% recycled co-polymer. Design of the modules (Large and small plates) is based on water molecule Structure. ( 50 Cum ). Supply of FRP filters de-silting suspended solid catcher and strainers including bucket of SS 304 grade with long fiber foam, filtration capacity 50 kilolitres per hour. (750 MM Dia) - 1 Nos . Supply of FRP Riser. (750 MM Dia)- 1 Nos. Assembling & Installation of Modular Rain Water Harvesting Structure with wrapping of Geotextile outside the Modular Tank and Connections of Filter. ( 50 Cum ). Desilting Chamber 1.0m*1.0m*1.0m ( Depth as per invert level ) -1 NO.(Make:LifeGreen System,Ecoaqua)

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Rocky strata including Boulders 300 mm dia metre

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia

Supply , Installation , testing and commissioning of FRP (Fiberglass Reinforced Polymer) recessed Manhole cover with frame design as per as per BSEN 124, IS 1726 25 ton Load in removable sections with matching frames of MS angles or making a similar size of offset in floor trimix / concrete, over open channel / chamber as per the drawings and designs and approved by architect and testing of joints complete as per direction of Engineer in Charge. (Make:HP.Tharmodrain,Everlast) 600mm x 600mm

HYDRO PNEUMATIC SYSTEM AND VARIOUS PUMPS Variable Speed Hydro-booster System for domestic water supply : Compact self contained Hydro-booster system comprising of following : In-line, vertical multistage, centrifugal clear water pumps with SS-316L /304 casing, S.S 3I6L impeller and SS-304/316 shaft, SS-316L/C.I. Base CED coating & head TEFC IE4/IE5 magnetic motor (IE5 is preferable motor for Suitable duties, if duties is not available in IE5 motor then you can quote pump with IE4 motor) with mechanical seal with Company fitted with company compliance certificate. Vendor to submit performance curves and technical catalogue with all GA Drawing of the proposed model for review and information. Panel mounted PLC and HMI Based multi pump controller with large graphical display with VGA 240 x 320 pixels and variable frequency drive (VFD) integrated in a Panel/Inbuilt with pump motor with IP54 class with pressure sensor transmitter (each pump each VFD), diodes to indicate pump ready, pump running and fault and capable to communicate with other controllers following MODBUS-RTU or BACNET Class-2 protocol through RS485 port. All alarms should be displayed in the controller. System should be equipped with dry running protection by both, reputed make Float (NO/NC) having 20 Mtrs Submersible Cable installed in the Tank & 0-10V DC Device installed on Suction Header. Indication of all type of faults / on-off status / electrical parameters shall be available on panel and central IBMS monitors. On-off operation for all pumps shall be available on BMS system. Global / Equivalent Make Pre-charged diaphragm pressure vessel with 3 years warranty from manufacturing date and company tested replaceable membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc. complete (size of pressure vessel shall be following capacity or as per manufacturer recommendation). Vessel Shall be pre-charged with Nitrogen as per respective Pump Head. Each Vessel shall be installed with 2 1/2" SS 304 Glycerine Filled Manometer on Top.Set of accessories such as SS 304 / MS with CED Coated headers for suction and discharge, control valves, non return valves, pressure transducers, pressure gauge, inter connecting power and control cabling etc. complete. For supplying DWS to all Floor (Terrace Booster Pump) Capacity per pump - 250 LPM Head - 20 mtr Pressure vessel - 100 liters or as per manufacturer recommendation Approx. Elec. Load. - 2.0 KW each pump Location - Terrace level 1 Set = 2 Nos. Pump (1 Working + 1 Standby - cascade operation) Suction head - flooded positive suction Supply, Installation, testing & commissioning (Make:Kriloskar,Wilo,Grundfos)

Supply, installation, testing & commissioning of Submersible single stage single entry pumps connected to submersible motor (The motor shall be IE3 watertight according to IEC class IP 68, and incorporate class F, insulation materials to withstand a continuous operating temperature of 155 deg C) for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit Or Auto Coupling with rubber diaphragm and bend, vertical discharge pipe, electrical panel with in built level controller with operational mode as one pump working at low level, both pumps at high level with a hooter alarm and cut off at dry level as determined. The pump shall be provided with a lifting devise of pull chain/guide rail & G.I. heavy class rising main of 5m length including interconnecting piping, valves (Ball Valve / Butterfly), Non return valves (GM/CI) 15 m cable etc. as per requirement complete in all respects. (Pumps shall be installed in a set of two pumps One working and One standby, with cascade operation). For supplying Domestic Water up to terrace Capacity per pump - 250 LPM Head - 30 mtr 1 Set (With Single VFD) = 2 Nos. Pump (1 Working + 1 Standby - cascade operation) Suction head - flooded positive suction Supply, Installation, testing & commissioning (Make:Kriloskar,Wilo,Grundfos)

Supply, installation, testing & commissioning of Submersible single stage single entry pumps connected to submersible motor (The motor shall be IE3 watertight according to IEC class IP 68, and incorporate class F, insulation materials to withstand a continuous operating temperature of 155 deg C) for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit Or Auto Coupling with rubber diaphragm and bend, vertical discharge pipe, electrical panel with in built level controller with operational mode as one pump working at low level, both pumps at high level with a hooter alarm and cut off at dry level as determined. The pump shall be provided with a lifting devise of pull chain/guide rail & G.I. heavy class rising main of 5m length including interconnecting piping, valves (Ball Valve / Butterfly), Non return valves (GM/CI) 15 m cable etc. as per requirement complete in all respects. (Pumps shall be installed in a set of two pumps One working and One standby, with cascade operation). For supplying Landscape Water Supply Capacity per pump - 150 LPM Head - 30 mtr 1 Set (With Single VFD) = 2 Nos. Pump (1 Working + 1 Standby - cascade operation) Suction head - flooded positive suction Supply, Installation, testing & commissioning (Make:Kriloskar,Wilo,Grundfos)

ELECTRICAL WORKS: Providing and erecting ISI Marked 3core 185 Sq.mm XLPE insulated 11 KV armoured cable Aluminium conductor to be laid on wall with clamps or in provided cable trench / pipe approved manner as directed.

Providing and erecting cable end terminatation kit, heat shrinkable Push on type Densons/ Raychem/ Elastimold make suitable for 11 KV XLPE cable 3core 185 Sq.mm (A) Outdoor type

Providing and erecting cable end terminatation kit, heat shrinkable Push on type Densons/ Raychem/ Elastimold make suitable for 11 KV XLPE cable 3core 185 Sq.mm (B) Indoor type

Supply, Installation Testing and commissioning of 11KV/433V 750KVA Outdoor Type USS with 400A HT VCB Section, 750 KVA Distribution Transformer (OIL TYPE WITH OFF LOAD TAP LINKS, TAP OF +/- 7.5 % IN STEP OF 1.5) Section and LT Section with 1600A FP EDO MICROPROCESSOR BASED ACB Section complete as per detailed Technical Specifications

SUB-STATION ACCESSORIE AS PER LOCAL NORMS - Safety Signages, Fire Extinguisher, First Aid Kits, Hand Glowes, Rubbers Mats etc

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board having IP-64 protection made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection, supplied switch gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket complete. The Panel shall be painted with epoxy powder coating. (The rates includes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following approved manufacturers as per attached SLD - MAIN LT PANEL (as per attached Single Line diagram)

2X400KVA DG AUTO SYCH, AUTO LOAD SHARING PANEL (Specification as above & as per attached Single Line diagram)

315KVAR APFCR PANEL (Specification as above & as per attached Single Line diagram)

GF - ELECTRICAL MAIN PANEL (Specification as above & as per attached Single Line diagram)

GF - AC ODU PANEL (Specification as above & as per attached Single Line diagram)

FF - ELECTRICAL MAIN PANEL (Specification as above & as per attached Single Line diagram)

FF - AC ODU PANEL (Specification as above & as per attached Single Line diagram)

UPS POWER PANEL (Specification as above & as per attached Single Line diagram)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) - Three phase 8 way SS Double door for horizontal single phase outgoing

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark - SP MCB

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity 6 to 32 Amp. - DP MCB

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity 40Amp. - DP MCB

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity 6 to 32 Amp.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity 40 Amp.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity 63 Amp.

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed 25 Amps.DP

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed 40 Amps.DP

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed 63 Amps.DP

Sheets steel powder coated enclosure suitable for incorporating One/Two nos. MCB.

Surge Protection Devices (SPD) Supplying, Assembling, levelling, connecting & testing following VSPs etc in boards as specified in 8.1, 8.2 & 8.3 1.4KV Protection level FP ,Class 'I', (Imax-40KA, 8/20µS) LEGRAND Cat no. 3938 or Equivalent

1.2KV Protection level FP, Class 's', (Imax-15KA, 8/20µS) LEGRAND Cat no.3943 or Equivalent

1.2KV Protection level DP, Class 's', (Imax-15KA, 8/20µS) LEGRAND Cat no. 3941 or Equivalent

Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having normal current rating up to 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only with Sheet metal Enclosure

Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having normal current rating up to 250A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only with Sheet metal Enclosure

Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having normal current rating up to 400A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only with Sheet metal Enclosure

Providing and erecting metallic vitrified danger notice board for MEDIUM VOLTAGE installation to be erected as per IS.

Providing and erecting metallic vitrified danger notice board for HIGH VOLTAGE installation to be erected as per IS.

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected as directed.

Providing and erecting approved make light control unit suitable to operate on 230V +20% having ON/OFF delay time of 30-50 seconds and having facility for Auto/manual system having two LDR lens to intensity light having capacity of 5A complete erected on section pillar with pipe and stand. Supplying & erecting power contactor for time switch complete erected as per direction Cat III 4 pole 440V 40 Amp.

Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground.

Covering of cable with second class bricks or cement tiles laid cover the cable crosswise & also on both sides with covering of 7. 5 Cms. layer of sand above & below cable (16 bricks per meter)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(a) 4 core 2.5 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(a-1) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(B) 4 core 6 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables(c) 4 core 10 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables(d) 4 core 16 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (A-1) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (B) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables(C) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (D) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (E) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (F) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (G) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (H) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (I) 3 1/2 core 300 Sq.mm ( 150 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (J) 3 1/2 core 400 Sq.mm ( 185 Sq. mm 1/2 core)

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 4 core 4 Sq. mm / 4 core 2.5 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 3 & 1/2 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (B) 3 & 1/2 core 35/50 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (C) 3 & 1/2 core 70 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (D) 3 & 1/2 core 95 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 3 & 1/2 core 120 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (F) 3 & 1/2 core 150 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (G) 3 & 1/2 core 185 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (H) 3 & 1/2 core 240 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (I) 3 & 1/2 core 300 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (4) 3 & 1/2 core 400 Sq. mm

Supplying & laying under floor pregalvanised corrosion proof rectangular sheet steel cable trunking of 1.6 mm thick having with stand point load up to 1.33 Ton & free from seepage of concrete of screed water having following size of dimensions and No of compartments (W x D x T) : 150mm x 38mm x 1.6mm with Three Compartments

[C] G.I. Junction cross over box for metal / Al. trunking with duct entry 25mm x 38mm size having epoxy powder coated trap lead with corrosion & rust free having load bearing capacity of 3.6 TONS with adjustable levelling screw of following size.150mm x 150mm x 60/75 mm depth

[C] G.I. Junction cross over box for metal / Al. trunking with duct entry 25mm x 38mm size having epoxy powder coated trap lead with corrosion & rust free having load bearing capacity of 3.6 TONS with adjustable levelling screw of following size.300mm x 300mm x 60/75 mm depth

Supplying and erecting approved make GRP Ladder type Cable Tray Material – Corrosion Resistant Polyester Flame Retardant U.V. Stabilized Resin System - Manufactured from Pultruded Sections - Polyester Resin System, Glass Content : 55 – 60 % - Thickness- Rung Sq. Hollow Tube 25mm x 25mm - Fixing of Rung to Side Rail with Thermoplastic Pin & Epoxy Adhesive, Assembly Single Stroke 3 Mtr. Length- Rung Spacing – 300mm - Length of Tray: 3000mm- Support Span – 2500mm, Deflection L/200 or < 10mm whichever is less - Specification Followed NEMA FG1 1993- UV Resistant - Flame Retardant – IS 6746 - Appendix K/UL 94, Very Low Flammability - Oxygen Index – Minimum 30% as per ASTM D 2863 Flame Spread (Extent of Burning) – 20mm as per Standard ASTM D 635 - Tensile Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 - Flexural Strength – 2500 – 10000 Kg/Cm2 as per Standard ASTM D 790- Izod Impact Strength – 130 Kg/Cm2 as per Standard ASTM D 256- Compressive Strength – 2500 – 5000 Kg/Cm2 as per Standard ASTM D 695- Barcol Hardness – 50 – 65 (A) Width 150 mm, Side Member “C” Section : 75 x 25 x 25mm with 4mm Thickness, Loading 30Kg./Mtr. With Concentrated Load 70Kg. at center of the span

(B) Width 300 mm, Side Member “C” Section : 100 x 35 x 35mm with 4mm Thickness, Loading 60Kg./Mtr. With Concentrated Load 70Kg. at center of the span

(C) Width 450 mm, Side Member “C” Section : 100 x 35 x 35mm with 4mm Thickness, Loading 75Kg./Mtr. With Concentrated Load 70Kg. at center of the span

(D) Width 600 mm, Side Member “C” Section : 100 x 35 x 35mm with 4mm Thickness, Loading 90Kg./Mtr. With Concentrated Load 70Kg. at center of the span

Supplying and erecting approved make GRP Perforated type Cable Tray Material – Corrosion Resistant Polyester Flame Retardant U.V. Stabilized Resin System - Manufactured from Pultruded Sections- Polyester Resin System, Glass Content : 55 – 60 % - - Standard Length : 3000mm- Support Span – 1500mm, Deflection L/200 - Specification NEMA FG1 1993- UV Resistant - Flame Retardant – IS 6746 - Appendix K/UL 94, Very Low Flammability - Specification Followed NEMA FG1 1993 Oxygen Index – Minimum 30% as per ASTM D 2863 - Flame Spread (Extent of Burning) – 20mm as per Standard ASTM D 635 - Tensile Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 - Flexural Strength – 2500 – 10000 Kg/Cm2 as per Standard ASTM D 790- Izod Impact Strength – 130 Kg/Cm2 as per Standard ASTM D 256- Compressive Strength – 2500 – 5000 Kg/Cm2 as per Standard ASTM D 695- Barcol Hardness – 50 – 65 (D) Width - 150mm, Pultruded “C” Channel with 30mm Sides 3mm Thickness, Loading 15 Kg./Mtr.

(E) Width - 200mm, Pultruded “C” Channel with 40mm Sides 4mm Thickness, Loading 25 Kg./Mtr.

(F) Width - 300mm, Pultruded “C” Channel with 50mm Sides 4mm Thickness, Loading 30 Kg./Mtr.

Fabrication : Supplying , fabricating and installation of various sizes clamps for cable tray supports using available M.S. sections & rod as per drawings or instructions of engineer in charge or consultant including applying zinc chromate yellow oxide and two to three coats of required enamel paints with anchor fasteners etc.

HEAT / FIRE RESISTANT COATING OF CABLE Supply and application of intumescent based coating on cables/ cable tray using CP 678 firestop cable coating of HILTI make or equivalent. The coating shall have a density in the range of 1.2 to 1.4 Kg/ L. The coating shall be non-toxic, asbestos and halogen free and shall have good mechanical strength. The coating shall comply with IEC 332 part 3 (1992).

Point wiring for Light Point / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.with medium class Rigid PVC pipe and accessories

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size in (a) with medium class Rigid PVC pipe and accessories Wire : (a) 2 wire 1.5 sq. mm

Additional Wire : Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size in (a) with medium class Rigid PVC pipe and accessories Wire : (b) 2 wire 2.5 sq. mm

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling, complete with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling ,complete with 6A Modular type switches and following type of accessories erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories

Do - As - Above but for 6 A x 5 pin 250 Volt switched socket outlet point at convenient location. ( Plug & Switch can be together or at different location )

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [II] For 6/16A Plug with 2-2.5 sq.mm Cu. Wire (a) with medium class Rigid PVC pipe and accessories

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [III] For 16A Plug with 2-4 sq.mm Cu. Wire (a) with medium class Rigid PVC pipe and accessories

Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following type of erection.2) For erecting concealed in RCC / Brick wall/slab or Open along with continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the surface to match the wall/ceiling. Supply and laying of 25 mm rigid PVC pipe of 1.6-1.8 mm thickness

Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following type of erection.2) For erecting concealed in RCC / Brick wall/slab or Open along with continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the surface to match the wall/ceiling. Supply and laying of 32 mm rigid PVC pipe of 1.6-1.8 mm thickness

Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following type of erection.2) For erecting concealed in RCC / Brick wall/slab or Open along with continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the surface to match the wall/ceiling. Supply and laying of 40 mm rigid PVC pipe of 1.6-1.8 mm thickness

Providing & laying ISI marked Rigid PVC pipe having 6Kg / cm2 (Class-3) to be erected at road crossing on or floor as directed for laying of cable. The pipes as following size of dia & weight per 6 mtr. (B) 50 mm Dia. (2.5Kg/6RMT)

Providing & laying ISI marked Rigid PVC pipe having 6Kg / cm2 (Class-3) to be erected at road crossing on or floor as directed for laying of cable. The pipes as following size of dia & weight per 6 mtr. (D) 75 mm Dia (5.5 Kg / 6RMT)

Providing & laying ISI marked Rigid PVC pipe having 6Kg / cm2 (Class-3) to be erected at road crossing on or floor as directed for laying of cable. The pipes as following size of dia & weight per 6 mtr. (E) 90 mm Dia (8.0 Kg / 6RMT)

Supplying & erecting Electronic Type Cordless Call Bell erected on PVC/Metal board having portable bell push working on D.C. & bell on 230V A.C. supply with cells / battery

Computer : Power Plugs 1 no. universal plug-switch combined + 1 Nos swithc for Below table 2 nos. 6A 5 pin Plug as below Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories Cat. III + Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire (Car.iii) + [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire (Car.iii)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with following sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size : 4 wire 4 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with following sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size : 4 wire 6 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size : 4 wire 10 sq. mm

Providing & erecting Approved make Ceiling Fan with double ball bearing ISI mark with Condenser 230 volt A.C.50 Hz 1200 mm sweep complete having 3 blades aluminium body and blade sets having ornamental design shanks , canopy & 30 cms. down rod erected with 24/0.2, 3 core flexible wire with earthing. It should be BLDC motor -5, 320RPM, 30-35W 5-Star rating Power saving Fan

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with necessary 24/ O.20, 3 core flexible wire with earthing.

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM [C] 380 mm dia 1400 RPM

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM [D] 450 mm dia 900 RPM

Supply,installation, testing and commisioning of Recccesed light fixtures suitable for Tech Zone ceiling size of 150wide x 1200mm long LED Tube light (28W) with Micro Prismatic Diffuser,4kv SPD Matt Steel Grey Extruded Aluminum Body with system luman output minimum 2800 lm. Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of Internal light fixtures of 1200mm long LED Tube light (20W) with 110LPW white color Aluminum extruded body and milky white diffuser.Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of Recessed Mounted 18W LED down light with White Aluminum dia cast , powder coated housing, reflector, PMMA Deep Down LG7 Diffuser cover with LED lamp and driver.LUMEN EFFICACY >110lm/w, PF >0.90, THD <20%, CCT 6000K, Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of Recessed Mounted 10W LED down light with White Aluminum dia cast, powder coated housing, reflector, PMMA Deep Down LG7 Diffuser with LED lamp and driver.LUMEN EFFICACY >90lm/W / 110lm/W, PF >0.90, THD <20%, CCT 6000K, Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of Wall Mounted IP-65 2x6W LED up-down light with die cast construction, Double reflector, toughened glass cover with LED lamp and driver.-PF>0.9 ,THD <20% ,Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of 600x600mm LED Panel Light of 42W LED Lamp White CRCA Luminaire Body and Micro prismatic diffuser, LUMEN EFFICACY > 120lm/w, PF >0.90, THD <20%,SPD 4kv CCT 6000K, powder coated housing, reflector, Diffuced PC cover with LED Panel and driver.Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of Recessed Mounted 20W/Mtr LED Profile light with Aluminium die cast construction, with Micro prisamatic diffuser . LED lamp and driver.PF >0.90.THD<20 %, Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of Recessed Mounted 3x18W LED COB light with die cast construction, Double reflector, toughened glass cover with LED lamp and driver.Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of 4W/Mtr LED strip light with indoor application with All require accessiers and Drivers LUMEN EFFICACY >90lm/W, PF >0.90, THD <20%, CCT 4000K, Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of Decorative light hanging light having Alumnium / Glass Bowl with LED lamp and driver LUMEN EFFICACY >90lm/W, PF >0.90, THD <20%, CCT 4000K, Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of Surface Mounted IP-65 35-40W LED light with Aluminum Die cast/Extruded housng with LED lamp and driver.LUMEN EFFICACY >100lm/W, PF >0.90, THD <20%, CCT 6000K, Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of 20W LED WALL WASHER LIGHT WITH ip-67 /IK 07protection, Aluminum dia cast BODY, 15'/55' LENSE DIFFUSER, LUMEN EFFICACY > 90lm/W, PF >0.90, THD <20%, CCT 4000K, powder coated adjustable housing, with LED Panel and driver.Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of IP-65 -IK 07 ,10-12W LED Bollard light with die cast aluminum die cast powder coated housing, reflector,with LED lamp and driver.Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of IP-65 3-6W LED Foot light with die cast aluminum die cast powder coated housing, reflector with LED lamp and driver.Make : Trilux, Wipro, Philips

Supply,installation, testing and commisioning of IP-65 3-6W LED Spike light with die cast aluminum 300 mm long spike, powder coated housing, reflector, toughened glass cover with LED lamp and driver.Make : Trilux, Wipro, Philips

Supply of approved make GRP / FRP Pole having following specifications: GRP Light Pole made by CNC filament winding machine using thermoset resin polyester/epoxy resin system) having minimum 62% glass content. The pole should be in one piece and tapered round in shape, having smooth finish and should be totally free from corrosion as well as non conductive & shock proof Pole should be provided with FRP Anchor Base and it should be heavy duty, or MS Material duly painted with Epoxy paint. Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and pigmented. A highly weather resistant polyurethane coating shall be applied to the pole after applying suitable primer system that ensures proper adhesion of the paint. Minimum coating thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10% of the length of pole for the given load“? Pole should be generally made as per the dimensional data, performance criteria and some interchangeability features of poles as per standard ANSI C 136.20 latest version or ASTM D 4923/01 . The size of pole and type of installation are as below . [D] Overall length of 4 Mtr. Average Thickness: 7mm. Top/ Bottom OD Dia A/F 89/145 mm ± 2mm approx. Approx. Weight of Pole 19 kg approx. (Without Base) Anchor Base (Size 250X250 & 12mm th.)

Providing M-20 / 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the pole of size 45 x 45 x 100 cms. Deep in below ground level with plinth of 45 cms x 45 cms (or 45 cms dia x 45 cms) high upper ground level with necessary curing and finishing in approved manner. ( for 4 & 6 mtr pole)

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out approx. 2mm thick box complete with bakelite connector strip 4way & hinged doors having locking arrangements with mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps& earth bolt of following size of box.: (b) 250mm x 200mm x 100mm [deep]

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. (c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in normal soil. Length of Pipe : 3.00 mtrs Back filling Compound :2 nos Bags of 25 Kg.

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. (b)For Electrical installation up to 11 KV in normal soil. Length of Pipe : 2.00 mtrs Back filling Compound :1 no. Bag of 25 Kg.

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using copper clamp.

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.

Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following type of erection.2) For erecting concealed in RCC / Brick wall/slab or Open along with continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the surface to match the wall/ceiling. Supply and laying of 25 mm rigid PVC pipe of 1.6-1.8 mm thickness .

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. (8) Modem Jack for Computer Open RJ-45 - cat-III

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. (3) Two Pin/RJ-11 Telephone Socket for One Gong Bell - cat-iii

Supplying & erecting Push button type telephone instrument (A)BEETEL Secure / BPL/, SONY / PANASONIC or equivalent make

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction : [C] CAT - 6

Supplying & erecting Delton or approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary connections. (b) Armoured [Jelly Filled] - 10 Pair

Supplying & erecting Delton or approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary connections. (b) Armoured [Jelly Filled] - 20 Pair

Supplying & erecting Delton or approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary connections. (b) Armoured [Jelly Filled] - 50 Pair

Supplying, erecting, commissioning and testing EPABX CMOS microprocessor based system having common features With remote programming & remote dialling having following other common features. (Accord Matrix or equivalent approved make)- Auto Call Disconnector- (Incoming - Local- STD) with programmable timing- External Call forward with DOSA- Walk in Class of service & trunk reservation- Boss ring & call back on No Reply last caller recall CLI- Hot Line with Delay & with No.- Unsupervised Conference- Serial DISA ( DISA with option to dial another No. if Extn. is No Reply)- Programming Flexibility of all features related to timer( 41 Timer)-10 Different group of out going call restriction like 95, 97, 98 etc.Having following capacity. [F] No. Extension - 128 , No. of Junction -24 , No. of expandable ports -512 , Operators Console -01 Compatible - ISDN & Networking

Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following type of erection.2) For erecting concealed in RCC / Brick wall/slab or Open along with continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the surface to match the wall/ceiling. Supply and laying of 25 mm rigid PVC pipe of 1.6-1.8 mm thickness .

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation. RG-6 Cable

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation. RG-11 Cable

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. for (4) TV Co-axial Socket outlet

Supply, Installation, Testing and Commissioning of 5 Megapixel HD Dome Camera, HD1080p,1/2.7" CMOS, 24 pcs LEDs, 20m IR, Indoor IR Eyeball, ICR, 0.1 Lux/F1.2, 12 VDC, Smart IR, DNR, DWDR, 3.6mm lens, 4 IN 1

Supply, Installation, Testing & Commissioning of 2 Megapixel HD Dome Camera, HD1080p,1/2.7" CMOS, 24 pcs LEDs, 20m IR, Outdoor IR Bullet, ICR, 0.1 Lux/F1.2, 12 VDC, Smart IR, DNR, DWDR, IP66, 3.6mm lens, 4 IN 1 OUTPUT

Supply, Installation, Testing and Commissioning of 16-Channel Digital Video Recorder recording with 4TB HDD with all require installation and integration with all camera system, 16 Turbo HD input, 16-ch video&1-ch audio input, 2 SATA interface, 1280×720P: 25(P)/30(N) fps/ch, 380 1U caseW/O HDD with all require software

Installation, Testing and Commissioning of 32" Full HD LED monitor with Power Cord complete as required & necessary video cards complete as required (if required). Make - Sony, Samsung, Philips

Supply, Installation, Testing and Commissioning Power Supply for Camera

Supplying & Laying 24U Wall mounted Rack for the CCTV DVR installation with all require power ports fixed wall rack has a tempered glass door and removable locking side panels. Included with this rack is one set of fully adjustable cage-nut style rails and removable top and bottom cable slot panels, allowing easy installation of CAT5 or fiber optic cables.

Supplying & Laying 24 port rack mounted switch for the following specfiication Approved by cUL Listed, CE, EN 60950, FCC Part 15 Class A, TUV, UL Listed 24 10/100/1000Mbps RJ45 ports

Bio metric Access Control with face detection and having a memory storage of 35 days for 200 members

Supplying & erecting recess speaker with 5W rated input power 3.3 K. Ohms / 3W impedance, 100 - 10000 Hz frequency response with 6 inch dia. cone type 8 ohms speakers duly fitted in ABS plastic cabinet of colour match with wall or ceiling of following size. (a)Round Shaped, 230mm dia. Speaker Make - JBL, Harman, Yamaha

Supplying & erecting wall mounting speaker with 5W rated input power 3.3 K. Ohms / 3W impedance, 100 - 10000 Hz frequency response with 6 inch dia. cone type 8 ohms speakers duly fitted in ABS plastic cabinet of colour match with wall or ceiling of following size. (a)Round Shaped, 230mm dia. Speaker - Make - JBL, Harman, Yamaha

Supplying & erecting of Amplifier having following specification: Power Output :250W (RMS) (300W Max.) inputs : 6 Misc. & 2 Aux. frequency Response :50-1500HZ I3db Tone Controls :Cut & Boost type LED Meter :5 LED Arrays The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with automatic changeover from AC to Battery operation, duly protected by wrong Battery Polarity connections.Make - JBL, Harman, Yamaha

Supplying & erecting of Amplifier having following specification: Power Output :400W (RMS) (300W Max.) inputs : 6 Misc. & 2 Aux. frequency Response :50-1500HZ I3db Tone Controls :Cut & Boost type LED Meter :5 LED Arrays The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with automatic changeover from AC to Battery operation, duly protected by wrong Battery Polarity connections.Make - JBL, Harman, Yamaha

Supplying & erecting, Philips / Ahuja make Secretary unit comprising - 63 dBV, 7.5 mv/pa gooseneck microphone, Talk switch, Priority switch, Talk Switch LED, Ring LED indicator, connecting cable 6 core shielded, 2.5mtr long with female plug, 300 mw 8 ohms impedance speaker, connector for Delegate unit, volume control device fitted in heavy cast aluminium housing

Supplying & erecting, of 2cx1.5 Sq. mm Cu Flexible Speaker cable

MULTI SENSOR : Supply installation testing and commissioning of Addressable type smoke / Heat detectors (Below False Ceiling) with LED indication lamp along with complete fixing accessories.

HEAT DETECTOR : Supply installation testing and commissioning of Addressable type smoke / Heat detectors (Below False Ceiling) with LED indication lamp along with complete fixing accessories.

Response Indicator : Supply installation testing and commissioning of Addressable type Response Indicator for above Ceiling detector with Red-Green LED indication lamp along with complete fixing accessories.

HOOTER - STROBE : Supply installation testing and commissioning of Addressable type Hooter with Strobe along with complete fixing accessories.

MCP/GBS : Supply installation testing and commissioning of Addressable type Glass Break Switch / Manual Call Point along with complete fixing accessories.

FIRE ALARM CONTROL PANEL - 4-LOOP - ADDRESABLE Supply installation testing and commissioning of Addressable type Fire Alarm Panel along with complete fixing accessories.

SMOKE DETECTOR REPEATER PANEL - ADDRESABLE Supply installation testing and commissioning of Addressable type Fire Alarm Panel along with complete fixing accessories.

Supply and fixing of 90 mins Battery back-up Exit Light fixtures with ceiling mount brackets and chain including all required accessories.

Supply, laying, testing and commissioning of twisted pair 2x1.5sq.mm Copper Armored 650V grade shielded XLPE insulated Fire Rate cable

Supply installation testing and commissioning High Speed quick power charging station for Electrical vehicle as per standard voltage rating with 40A FP MCB and 2 Nos 6A power plugs, it should have digital screen and all parameter recorders.

Supply installation testing and commissioning of roof top solar system with 20 years performance warranty , cost include high efficiency solar SPV module, require earthing, Lightening arrestor, supporting fabrication hot dip GI structure with paint, all require wiring, ACDB DCDB, Solar power meter, and inverter as require with consideration of 1-Year DLP

AMC : Comprehensive AMC with performance gurantee for the Installed Solar Panel for 1st Year after DLP (period 3% of Inititla Cost) Cleaning of panels, Preventive maitnancne, Checking of all wire connection, Inverter, Monthly Report to AMC etc

AMC : Comprehensive AMC with [erformance gurantee for the Installed Solar Panel for 2nd Year after DLP (period 3.5% of Inititla Cost) Cleaning of panels, Preventive maitnancne, Checking of all wire connection, Inverter, Monthly Report to AMC etc

AMC : Comprehensive AMC with [erformance gurantee for the Installed Solar Panel for 3rd Year after DLP (period 4% of Inititla Cost) Cleaning of panels, Preventive maitnancne, Checking of all wire connection, Inverter, Monthly Report to AMC etc

Supplyinhg certified, trained 2+Year Experienced / Electrician man-power for the Monthly Basis for 1st Year Scope of work to Operate & maintnance of the following Work HT VCB Panel, RMU, Transformer, Lt Panel, Cables, DB, MCB, MCCB, Capasitor, Light Fixtures, Fire Alarm Panel, Smoke-Heat Detector, HVAC System cable work, Light Pole, Facade Lighting, Data-TV-Telephone network and Equiment etc

Supplyinhg certified, trained 2+Year Experienced / Electrician man-power for the Monthly Basis for 2nd Year Scope of work to Operate & maintnance of the following Work HT VCB Panel, RMU, Transformer, Lt Panel, Cables, DB, MCB, MCCB, Capasitor, Light Fixtures, Fire Alarm Panel, Smoke-Heat Detector, HVAC System cable work, Light Pole, Facade Lighting, Data-TV-Telephone network and Equiment etc

Supplyinhg certified, trained 2+Year Experienced / Electrician man-power for the Monthly Basis for 3rd Year Scope of work to Operate & maintnance of the following Work HT VCB Panel, RMU, Transformer, Lt Panel, Cables, DB, MCB, MCCB, Capasitor, Light Fixtures, Fire Alarm Panel, Smoke-Heat Detector, HVAC System cable work, Light Pole, Facade Lighting, Data-TV-Telephone network and Equiment etc.

Supplyinhg certified, trained 2+Year Experienced Electrician man-power for the Monthly Basis for 4th Year Scope of work to Operate & maintnance of the following Work HT VCB Panel, RMU, Transformer, Lt Panel, Cables, DB, MCB, MCCB, Capasitor, Light Fixtures, Fire Alarm Panel, Smoke-Heat Detector, HVAC System cable work, Light Pole, Facade Lighting, Data-TV-Telephone network and Equiment etc.

Comprehensive AMC for the Full Electrical Systemfor 1st Year after DLP (period 3% of Inititla Cost) - Performance bank gurantee to be submit at time of complwetion of work Scope of work to Operate & maintnance of the following Work HT VCB Panel, RMU, Transformer, Lt Panel, Cables, DB, MCB, MCCB, Capasitor, Light Fixtures, Fire Alarm Panel, Smoke-Heat Detector, HVAC System cable work, Light Pole, Facade Lighting, Data-TV-Telephone network and Equiment etc

Comprehensive AMC for the Full Electrical Systemfor 2nd Year after DLP (period 3.5% of Inititla Cost) - Performance bank gurantee to be submit at time of complwetion of work Scope of work to Operate & maintnance of the following Work HT VCB Panel, RMU, Transformer, Lt Panel, Cables, DB, MCB, MCCB, Capasitor, Light Fixtures, Fire Alarm Panel, Smoke-Heat Detector, HVAC System cable work, Light Pole, Facade Lighting, Data-TV-Telephone network and Equiment etc

Comprehensive AMC for the Full Electrical Systemfor 3rd Year after DLP (period 4% of Inititla Cost) - Performance bank gurantee to be submit at time of complwetion of work Scope of work to Operate & maintnance of the following Work HT VCB Panel, RMU, Transformer, Lt Panel, Cables, DB, MCB, MCCB, Capasitor, Light Fixtures, Fire Alarm Panel, Smoke-Heat Detector, HVAC System cable work, Light Pole, Facade Lighting, Data-TV-Telephone network and Equiment etc

Liasoning with Local Electricity Board & Electrical Inspector for upgradation of Existing 11KV HT Power & Electrical inspector certification in totality to charge the power other related accessories. etc. complete. Charges for doing liasioning work for obtaining the necessary clearances from the Electrical inspector/competent Authorities for the total Electrical installation, Elevator Inspection, co-ordinating with various agencies. All necessary drawings, calculations, test certificates, etc. as required by the seauthorities shall be prepared and furnished by the EPCV endor. Any modification / rectification as required by these authorities shall be carried out by the EPCV endor at free of cost. The fees required to be paid to these authorities for inspection shall be borne by Owner on production of documentary evidences.

Liasoning with local authority / Fire Dept for roof top solar system Charges for doing liasioning work for obtaining the necessary clearances from the Electrical inspector/competent Authorities for the total Electrical installation, Elevator Inspection, co-ordinating with various agencies. All necessary drawings, calculations, test certificates, etc. as required by the seauthorities shall be prepared and furnished by the EPCV endor. Any modification / rectification as required by these authorities shall be carried out by the EPCV endor at free of cost. The fees required to be paid to these authorities for inspection shall be borne by Owner on production of documentary evidences.

Supply of VRF Airconditioning Units Microprocessor based Outdoor units shall be provided with twin rotary/scroll compressor. It shall be equipped with inverter controller and capable of changing the rotating speed to follow variations in cooling. Outdoor units shall be suitable for mix-match connection of all type of indoor units. Indoor & Outdoor unit shall be factory assembled, tested and filled with first charge of refrigerant before delivery at site. All compressors shall be of 100% inverter type. Outdoor unit shall be weather proof casing constructed from heavy gauge mild steel panels with powder coated finish. All outdoor units above 6 HP rating or in case of with multiple compressors shall be with 3D scroll compressors. The noise level shall not be more than 60 dB A at 1 m distance horizontally and 1.5 m above ground level. All necessary safety devices like high pressure switch, low pressure switch, fuse, crankcase heater, fusible plug, over current protection for Inverter, short cycling guard timer, single phase preventer, Anti Harmonic Filter etc.,. Refrigerant pipe circuit shall include refnets, liquid receiver / accumulator, liquid & gas shut off valves and solenoid valve. Refrigerant pipe shall be in high grade copper (16G) of refrigeration quality with Eddy current testing & material test certificates. All connections like tees, reducers etc shall be standard make fittings. Cold lines shall be insulated to avoid the condensation. For individual piping 50 / 100 mm wide Al tape shall be used at joints of piping with Bands for identification. For Outdoor piping, the finish shall be woven GRP Mat finished with colored Epoxy paints and enclosed with GI trays to avoid physical damage.All Indoor units shall have electronic expansion valve, adequate insulation to avoid condensation. Coils shall be anti-corrosive. Control wiring between Indoor & Outdoor shall be part of VRF supplier scope. Outdoor must be equiped with multi compressor & should be run on failure of any of one compressor. To have provision for potential free contact -to get signal from BMS in case of fire -so that AC can get shut off. All accessories for installation / commissioning should be part of the package ( VRF Make : Mitsubishi Heavy / O General / Mitsubishi Electric) 12 HP

Supply of VRF Airconditioning Units Microprocessor based Outdoor units shall be provided with twin rotary/scroll compressor. It shall be equipped with inverter controller and capable of changing the rotating speed to follow variations in cooling. Outdoor units shall be suitable for mix-match connection of all type of indoor units. Indoor & Outdoor unit shall be factory assembled, tested and filled with first charge of refrigerant before delivery at site. All compressors shall be of 100% inverter type. Outdoor unit shall be weather proof casing constructed from heavy gauge mild steel panels with powder coated finish. All outdoor units above 6 HP rating or in case of with multiple compressors shall be with 3D scroll compressors. The noise level shall not be more than 60 dB A at 1 m distance horizontally and 1.5 m above ground level. All necessary safety devices like high pressure switch, low pressure switch, fuse, crankcase heater, fusible plug, over current protection for Inverter, short cycling guard timer, single phase preventer, Anti Harmonic Filter etc.,. Refrigerant pipe circuit shall include refnets, liquid receiver / accumulator, liquid & gas shut off valves and solenoid valve. Refrigerant pipe shall be in high grade copper (16G) of refrigeration quality with Eddy current testing & material test certificates. All connections like tees, reducers etc shall be standard make fittings. Cold lines shall be insulated to avoid the condensation. For individual piping 50 / 100 mm wide Al tape shall be used at joints of piping with Bands for identification. For Outdoor piping, the finish shall be woven GRP Mat finished with colored Epoxy paints and enclosed with GI trays to avoid physical damage.All Indoor units shall have electronic expansion valve, adequate insulation to avoid condensation. Coils shall be anti-corrosive. Control wiring between Indoor & Outdoor shall be part of VRF supplier scope. Outdoor must be equiped with multi compressor & should be run on failure of any of one compressor. To have provision for potential free contact -to get signal from BMS in case of fire -so that AC can get shut off. All accessories for installation / commissioning should be part of the package ( VRF Make : Mitsubishi Heavy / O General / Mitsubishi Electric) 18 HP

Supply of VRF Airconditioning Units Microprocessor based Outdoor units shall be provided with twin rotary/scroll compressor. It shall be equipped with inverter controller and capable of changing the rotating speed to follow variations in cooling. Outdoor units shall be suitable for mix-match connection of all type of indoor units. Indoor & Outdoor unit shall be factory assembled, tested and filled with first charge of refrigerant before delivery at site. All compressors shall be of 100% inverter type. Outdoor unit shall be weather proof casing constructed from heavy gauge mild steel panels with powder coated finish. All outdoor units above 6 HP rating or in case of with multiple compressors shall be with 3D scroll compressors. The noise level shall not be more than 60 dB A at 1 m distance horizontally and 1.5 m above ground level. All necessary safety devices like high pressure switch, low pressure switch, fuse, crankcase heater, fusible plug, over current protection for Inverter, short cycling guard timer, single phase preventer, Anti Harmonic Filter etc.,. Refrigerant pipe circuit shall include refnets, liquid receiver / accumulator, liquid & gas shut off valves and solenoid valve. Refrigerant pipe shall be in high grade copper (16G) of refrigeration quality with Eddy current testing & material test certificates. All connections like tees, reducers etc shall be standard make fittings. Cold lines shall be insulated to avoid the condensation. For individual piping 50 / 100 mm wide Al tape shall be used at joints of piping with Bands for identification. For Outdoor piping, the finish shall be woven GRP Mat finished with colored Epoxy paints and enclosed with GI trays to avoid physical damage.All Indoor units shall have electronic expansion valve, adequate insulation to avoid condensation. Coils shall be anti-corrosive. Control wiring between Indoor & Outdoor shall be part of VRF supplier scope. Outdoor must be equiped with multi compressor & should be run on failure of any of one compressor. To have provision for potential free contact -to get signal from BMS in case of fire -so that AC can get shut off. All accessories for installation / commissioning should be part of the package ( VRF Make : Mitsubishi Heavy / O General / Mitsubishi Electric) 16 HP

Supply of VRF Airconditioning Units Microprocessor based Outdoor units shall be provided with twin rotary/scroll compressor. It shall be equipped with inverter controller and capable of changing the rotating speed to follow variations in cooling. Outdoor units shall be suitable for mix-match connection of all type of indoor units. Indoor & Outdoor unit shall be factory assembled, tested and filled with first charge of refrigerant before delivery at site. All compressors shall be of 100% inverter type. Outdoor unit shall be weather proof casing constructed from heavy gauge mild steel panels with powder coated finish. All outdoor units above 6 HP rating or in case of with multiple compressors shall be with 3D scroll compressors. The noise level shall not be more than 60 dB A at 1 m distance horizontally and 1.5 m above ground level. All necessary safety devices like high pressure switch, low pressure switch, fuse, crankcase heater, fusible plug, over current protection for Inverter, short cycling guard timer, single phase preventer, Anti Harmonic Filter etc.,. Refrigerant pipe circuit shall include refnets, liquid receiver / accumulator, liquid & gas shut off valves and solenoid valve. Refrigerant pipe shall be in high grade copper (16G) of refrigeration quality with Eddy current testing & material test certificates. All connections like tees, reducers etc shall be standard make fittings. Cold lines shall be insulated to avoid the condensation. For individual piping 50 / 100 mm wide Al tape shall be used at joints of piping with Bands for identification. For Outdoor piping, the finish shall be woven GRP Mat finished with colored Epoxy paints and enclosed with GI trays to avoid physical damage.All Indoor units shall have electronic expansion valve, adequate insulation to avoid condensation. Coils shall be anti-corrosive. Control wiring between Indoor & Outdoor shall be part of VRF supplier scope. Outdoor must be equiped with multi compressor & should be run on failure of any of one compressor. To have provision for potential free contact -to get signal from BMS in case of fire -so that AC can get shut off. All accessories for installation / commissioning should be part of the package ( VRF Make : Mitsubishi Heavy / O General / Mitsubishi Electric) 22 HP

Supply of VRF Airconditioning Units Microprocessor based Outdoor units shall be provided with twin rotary/scroll compressor. It shall be equipped with inverter controller and capable of changing the rotating speed to follow variations in cooling. Outdoor units shall be suitable for mix-match connection of all type of indoor units. Indoor & Outdoor unit shall be factory assembled, tested and filled with first charge of refrigerant before delivery at site. All compressors shall be of 100% inverter type. Outdoor unit shall be weather proof casing constructed from heavy gauge mild steel panels with powder coated finish. All outdoor units above 6 HP rating or in case of with multiple compressors shall be with 3D scroll compressors. The noise level shall not be more than 60 dB A at 1 m distance horizontally and 1.5 m above ground level. All necessary safety devices like high pressure switch, low pressure switch, fuse, crankcase heater, fusible plug, over current protection for Inverter, short cycling guard timer, single phase preventer, Anti Harmonic Filter etc.,. Refrigerant pipe circuit shall include refnets, liquid receiver / accumulator, liquid & gas shut off valves and solenoid valve. Refrigerant pipe shall be in high grade copper (16G) of refrigeration quality with Eddy current testing & material test certificates. All connections like tees, reducers etc shall be standard make fittings. Cold lines shall be insulated to avoid the condensation. For individual piping 50 / 100 mm wide Al tape shall be used at joints of piping with Bands for identification. For Outdoor piping, the finish shall be woven GRP Mat finished with colored Epoxy paints and enclosed with GI trays to avoid physical damage.All Indoor units shall have electronic expansion valve, adequate insulation to avoid condensation. Coils shall be anti-corrosive. Control wiring between Indoor & Outdoor shall be part of VRF supplier scope. Outdoor must be equiped with multi compressor & should be run on failure of any of one compressor. To have provision for potential free contact -to get signal from BMS in case of fire -so that AC can get shut off. All accessories for installation / commissioning should be part of the package ( VRF Make : Mitsubishi Heavy / O General / Mitsubishi Electric) 24 HP

VRF Indoor Units (Ground Floor) Supply of Ceiling mounted reguar Cassette Unit with Panel, drain pump. Size : 950 X 950 (Make : Mitsubishi Heavy / O General / Daikin) 1.6 TR

VRF Indoor Units (Ground Floor) Supply of Ceiling mounted reguar Cassette Unit with Panel, drain pump. Size : 950 X 950 (Make : Mitsubishi Heavy / O General / Daikin) 2.0 TR

VRF Indoor Units (Ground Floor) Supply of Ceiling mounted reguar Cassette Unit with Panel, drain pump. Size : 950 X 950 (Make : Mitsubishi Heavy / O General / Daikin) 2.5 TR

VRF Indoor Units (Ground Floor) Supply of Ceiling mounted reguar Cassette Unit with Panel, drain pump. Size : 950 X 950 (Make : Mitsubishi Heavy / O General / Daikin) 3.2 TR

VRF Indoor Units (Ground Floor) Supply of Ceiling mounted reguar Cassette Unit with Panel, drain pump. Size : 950 X 950 (Make : Mitsubishi Heavy / O General / Daikin) 4.0 TR

VRF Indoor Units (Ground Floor) Supply of Ceiling mounted reguar Cassette Unit with Panel, drain pump. Size : 950 X 950 (Make : Mitsubishi Heavy / O General / Daikin) 4.6 TR

VRF Indoor Units (First Floor) Supply of Ceiling mounted reguar Cassette Unit with Panel, Filter, Drain pump. Size : 950 X 950 (Make : Mitsubishi Heavy / O General / Daikin) 1.6 TR

VRF Indoor Units (First Floor) Supply of Ceiling mounted reguar Cassette Unit with Panel, Filter, Drain pump. Size : 950 X 950 (Make : Mitsubishi Heavy / O General / Daikin) 2.3 TR

VRF Indoor Units (First Floor) Supply of Ceiling mounted reguar Cassette Unit with Panel, Filter, Drain pump. Size : 950 X 950 (Make : Mitsubishi Heavy / O General / Daikin) 2.5 TR

VRF Indoor Units (First Floor) Supply of Ceiling mounted reguar Cassette Unit with Panel, Filter, Drain pump. Size : 950 X 950 (Make : Mitsubishi Heavy / O General / Daikin) 3.2 TR

VRF Indoor Units (First Floor) Supply of Ceiling mounted reguar Cassette Unit with Panel, Filter, Drain pump. Size : 950 X 950 (Make : Mitsubishi Heavy / O General / Daikin) 4.0 TR

VRF Indoor Units (First Floor) Supply of Ceiling mounted reguar Cassette Unit with Panel, Filter, Drain pump. Size : 950 X 950 (Make : Mitsubishi Heavy / O General / Daikin) 4.6 TR

VRF Indoor Units (Ground Floor) Supply of Ceiling mounted Compact Cassette Unit with Panel, Filter, Drain pump. Size : 600 X 600 (Make : Mitsubishi Heavy / O General / Daikin) 1.1 TR

VRF Indoor Units (First Floor) Supply of Ceiling mounted Compact Cassette Unit with Panel, Filter, Drain pump. Size : 600 X 600 (Make : Mitsubishi Heavy / O General / Daikin) 1.1 TR

VRF Indoor Units (First Floor) Supply of Ceiling mounted Compact Cassette Unit with Panel, Filter, Drain pump. Size : 600 X 600 (Make : Mitsubishi Heavy / O General / Daikin) 1.3 TR

VRF Indoor Units (First Floor) Supply of Ceiling mounted Compact Cassette Unit with Panel, Filter, Drain pump. Size : 600 X 600 (Make : Mitsubishi Heavy / O General / Daikin) 1.6 TR

VRF Indoor Units (Ground Floor) Supply of Ceiling mounted Hig Static Duct Unit with Drain pump, Filters. (Make : Mitsubishi Heavy / O General / Daikin) 6.4 TR

VRF Indoor Units (Ground Floor) Supply of Ceiling mounted Hig Static Duct Unit with Drain pump, Filters. (Make : Mitsubishi Heavy / O General / Daikin) 8.3 TR

VRF Indoor Units (First Floor) Supply of Ceiling mounted Hig Static Duct Unit with Drain pump & Filters (Make : Mitsubishi Heavy / O General / Daikin) 6.4 TR

VRF Indoor Units (First Floor) Supply of Ceiling mounted Hig Static Duct Unit with Drain pump & Filters (Make : Mitsubishi Heavy / O General / Daikin) 8.3 TR

Treated Fresh Air Unit Supply Of Ceiling Suspended Treated Fresh Air Unit As Per Specs (VRF Based) (Make : VTS / Edgetech / Flaktwood) Frame structure: Extruded profile Al. anodized with thermal break. Panels: Double skin panels 48 mm thick +- 2 puff. Inner skin: 20G GI plain and Outer skin: 24G GI pre-coated Skid: GI epoxy coated Drain pan: 1.2 mm thick SS304 with 25mm Nitrile rubber sandwiched. Provide 40 mm SS threaded drain nipple. Dampers: Al. anodized low leakage aerofoil.Shaft to accept motorized actuators. Filter section: With MERV-13 filters, Prefilter ,access doors filters in extruded al. box type frames with gasket arrangements around filter frames. This should include one set of commissioning filters. Coil Section: Cu coils with hydrophilic coated al. fins,8 Row coil Fan section: Plug Fans with access doors on both sides, inspection windows, limit switch to shut off fan on door opening. Flexible connectors: Non flammable, weather and fungus proof Vibration Isolators: For fans and mounting arrangements - Rust resistant spring Drive: EFF-1 motor with Starter Panel & cabling, wireless remote, Non Polarised NO-NC contacts for tripping on signal from Fire Dampers/Fire Alarm Panel with all required accessories should also be included in the quoted Price. The maximum face velocity shall be 2.5 m/s. The port for manometers shall also be provided to monitor the pressure drop individually across the pre-filter for each TFAU. The filter section shall be so arranged that they can be easily removed for cleaning. Heavy duct flexible double layer canvas connection shall be provided at the outlet of TFAU Fan. The minimum external fan static shall be as per technical specifications. TFAU's should be suitable for Fan velocity not exceeding 1800 FPM, coil Face Velocity not exceeding 500 FPM and Fan RPM not exceeding 1000 RPM. TFAUs with suitable VFD & bypass facility with separate starter panel. Fan efficiency > 70% & complete as per specifications & drawings. TFAU's should be suitable for Multikit connection with VRF Units. 2050 CFM/13.68 TR - 55mm wg Total static pressure ( GF _ OLD )

Treated Fresh Air Unit Supply Of Ceiling Suspended Treated Fresh Air Unit As Per Specs (VRF Based) (Make : VTS / Edgetech / Flaktwood) Frame structure: Extruded profile Al. anodized with thermal break. Panels: Double skin panels 48 mm thick +- 2 puff. Inner skin: 20G GI plain and Outer skin: 24G GI pre-coated Skid: GI epoxy coated Drain pan: 1.2 mm thick SS304 with 25mm Nitrile rubber sandwiched. Provide 40 mm SS threaded drain nipple. Dampers: Al. anodized low leakage aerofoil.Shaft to accept motorized actuators. Filter section: With MERV-13 filters, Prefilter ,access doors filters in extruded al. box type frames with gasket arrangements around filter frames. This should include one set of commissioning filters. Coil Section: Cu coils with hydrophilic coated al. fins,8 Row coil Fan section: Plug Fans with access doors on both sides, inspection windows, limit switch to shut off fan on door opening. Flexible connectors: Non flammable, weather and fungus proof Vibration Isolators: For fans and mounting arrangements - Rust resistant spring Drive: EFF-1 motor with Starter Panel & cabling, wireless remote, Non Polarised NO-NC contacts for tripping on signal from Fire Dampers/Fire Alarm Panel with all required accessories should also be included in the quoted Price. The maximum face velocity shall be 2.5 m/s. The port for manometers shall also be provided to monitor the pressure drop individually across the pre-filter for each TFAU. The filter section shall be so arranged that they can be easily removed for cleaning. Heavy duct flexible double layer canvas connection shall be provided at the outlet of TFAU Fan. The minimum external fan static shall be as per technical specifications. TFAU's should be suitable for Fan velocity not exceeding 1800 FPM, coil Face Velocity not exceeding 500 FPM and Fan RPM not exceeding 1000 RPM. TFAUs with suitable VFD & bypass facility with separate starter panel. Fan efficiency > 70% & complete as per specifications & drawings. TFAU's should be suitable for Multikit connection with VRF Units. 2250 CFM/15.06 TR - 55mm wg Total static pressure ( GF _ NEW )

Treated Fresh Air Unit Supply Of Ceiling Suspended Treated Fresh Air Unit As Per Specs (VRF Based) (Make : VTS / Edgetech / Flaktwood) Frame structure: Extruded profile Al. anodized with thermal break. Panels: Double skin panels 48 mm thick +- 2 puff. Inner skin: 20G GI plain and Outer skin: 24G GI pre-coated Skid: GI epoxy coated Drain pan: 1.2 mm thick SS304 with 25mm Nitrile rubber sandwiched. Provide 40 mm SS threaded drain nipple. Dampers: Al. anodized low leakage aerofoil.Shaft to accept motorized actuators. Filter section: With MERV-13 filters, Prefilter ,access doors filters in extruded al. box type frames with gasket arrangements around filter frames. This should include one set of commissioning filters. Coil Section: Cu coils with hydrophilic coated al. fins,8 Row coil Fan section: Plug Fans with access doors on both sides, inspection windows, limit switch to shut off fan on door opening. Flexible connectors: Non flammable, weather and fungus proof Vibration Isolators: For fans and mounting arrangements - Rust resistant spring Drive: EFF-1 motor with Starter Panel & cabling, wireless remote, Non Polarised NO-NC contacts for tripping on signal from Fire Dampers/Fire Alarm Panel with all required accessories should also be included in the quoted Price. The maximum face velocity shall be 2.5 m/s. The port for manometers shall also be provided to monitor the pressure drop individually across the pre-filter for each TFAU. The filter section shall be so arranged that they can be easily removed for cleaning. Heavy duct flexible double layer canvas connection shall be provided at the outlet of TFAU Fan. The minimum external fan static shall be as per technical specifications. TFAU's should be suitable for Fan velocity not exceeding 1800 FPM, coil Face Velocity not exceeding 500 FPM and Fan RPM not exceeding 1000 RPM. TFAUs with suitable VFD & bypass facility with separate starter panel. Fan efficiency > 70% & complete as per specifications & drawings. TFAU's should be suitable for Multikit connection with VRF Units. 2250 CFM/15.06 TR - 55mm wg Total static pressure ( FF _ NEW )

Treated Fresh Air Unit Supply Of Ceiling Suspended Treated Fresh Air Unit As Per Specs (VRF Based) (Make : VTS / Edgetech / Flaktwood) Frame structure: Extruded profile Al. anodized with thermal break. Panels: Double skin panels 48 mm thick +- 2 puff. Inner skin: 20G GI plain and Outer skin: 24G GI pre-coated Skid: GI epoxy coated Drain pan: 1.2 mm thick SS304 with 25mm Nitrile rubber sandwiched. Provide 40 mm SS threaded drain nipple. Dampers: Al. anodized low leakage aerofoil.Shaft to accept motorized actuators. Filter section: With MERV-13 filters, Prefilter ,access doors filters in extruded al. box type frames with gasket arrangements around filter frames. This should include one set of commissioning filters. Coil Section: Cu coils with hydrophilic coated al. fins,8 Row coil Fan section: Plug Fans with access doors on both sides, inspection windows, limit switch to shut off fan on door opening. Flexible connectors: Non flammable, weather and fungus proof Vibration Isolators: For fans and mounting arrangements - Rust resistant spring Drive: EFF-1 motor with Starter Panel & cabling, wireless remote, Non Polarised NO-NC contacts for tripping on signal from Fire Dampers/Fire Alarm Panel with all required accessories should also be included in the quoted Price. The maximum face velocity shall be 2.5 m/s. The port for manometers shall also be provided to monitor the pressure drop individually across the pre-filter for each TFAU. The filter section shall be so arranged that they can be easily removed for cleaning. Heavy duct flexible double layer canvas connection shall be provided at the outlet of TFAU Fan. The minimum external fan static shall be as per technical specifications. TFAU's should be suitable for Fan velocity not exceeding 1800 FPM, coil Face Velocity not exceeding 500 FPM and Fan RPM not exceeding 1000 RPM. TFAUs with suitable VFD & bypass facility with separate starter panel. Fan efficiency > 70% & complete as per specifications & drawings. TFAU's should be suitable for Multikit connection with VRF Units. 1420 CFM/9.48 TR - 55mm wg Total static pressure ( FF _ OLD )

Toilet Ventilation Fans Supply Of Ceiling Suspended Ventilation Fan Unit As Per Specs (Make : Airflow / Nicotra / Greenheck) Supply, installing, testing, commissioning & handing over of INLINE FRESH / EXHAUST Air Fan in accordance with and meeting the intents & specifications & drawings complete with Fan with Drive Motors, Mild Steel Mounting Frame, Vibration Isolators, Gravity louvers. (NOTE : SUBJECT TO ACTUAL STATIC PRESSURE CALCULATION. ON SHOP DRAWINGS BY CONTRACTOR AND APPROVAL OF CONSULTANT) 1410 CFM / 20MM ESP - Exhaust Air Fan

Toilet Ventilation Fans Supply Of Ceiling Suspended Ventilation Fan Unit As Per Specs (Make : Airflow / Nicotra / Greenheck) Supply, installing, testing, commissioning & handing over of INLINE FRESH / EXHAUST Air Fan in accordance with and meeting the intents & specifications & drawings complete with Fan with Drive Motors, Mild Steel Mounting Frame, Vibration Isolators, Gravity louvers. (NOTE : SUBJECT TO ACTUAL STATIC PRESSURE CALCULATION. ON SHOP DRAWINGS BY CONTRACTOR AND APPROVAL OF CONSULTANT) 1270 CFM / 20MM ESP - Fresh Air Fan

Toilet Ventilation Fans Supply Of Ceiling Suspended Ventilation Fan Unit As Per Specs (Make : Airflow / Nicotra / Greenheck) Supply, installing, testing, commissioning & handing over of INLINE FRESH / EXHAUST Air Fan in accordance with and meeting the intents & specifications & drawings complete with Fan with Drive Motors, Mild Steel Mounting Frame, Vibration Isolators, Gravity louvers. (NOTE : SUBJECT TO ACTUAL STATIC PRESSURE CALCULATION. ON SHOP DRAWINGS BY CONTRACTOR AND APPROVAL OF CONSULTANT) 2420 CFM / 20MM ESP - Exhaust Air Fan

Toilet Ventilation Fans Supply Of Ceiling Suspended Ventilation Fan Unit As Per Specs (Make : Airflow / Nicotra / Greenheck) Supply, installing, testing, commissioning & handing over of INLINE FRESH / EXHAUST Air Fan in accordance with and meeting the intents & specifications & drawings complete with Fan with Drive Motors, Mild Steel Mounting Frame, Vibration Isolators, Gravity louvers. (NOTE : SUBJECT TO ACTUAL STATIC PRESSURE CALCULATION. ON SHOP DRAWINGS BY CONTRACTOR AND APPROVAL OF CONSULTANT) 2110 CFM / 20MM ESP - Fresh Air Fan

Copper Refrigerant Joint Supply Of OEM make refrigerant joints (Make : Mitsubishi Heavy / O General / Daikin)

TFA Connection kit with VRF Outdoor Supply Of OEM make TFA connection kit complete with PMV valve & its controller (Make : Mitsubishi Heavy / O General / Daikin)

Cordless Remote Controller Supply Of OEM make Cordless Remote Controller with stand and batteries (Make : Mitsubishi Heavy / O General / Daikin)

Corded Remote Controller Supply Of OEM make Corded Remote Controller with fixing arrangement (Make : Mitsubishi Heavy / O General / Daikin)

Central Remote Controller Supply Of OEM make Central Remote Controller (Make : Mitsubishi Heavy / O General / Daikin) Central Remote Controller Monitoring & control of temperature of each Area & Units ON/OFF control for each Area & Units Weekly scheduling for each Area & Units Overriding of control function of individual control units Scheduling & historical data storage of conditions as per requirement LCD Display Panel To be integrated with Fire Panel To be installed at Reception Area. And should be opearted from PC It should be compatible with latest microsoft version. *In case the no. IDUs / ODUs is beyond the capability of a single CRC, then the rate quoted here should include cost of add-on modules / multiple CRCs / cabling.

Starter Panel For TFA Supply Of Starter Panel for TFA Factory supplied control & operating panel with required MCB, protection housed in weatherproof MS painted enclouser, near to TFA Electrical panel will be complete with necessary starters, fuses, switches, timers, overload relays, contactors, push buttons and indicating lamps, single phasing preventing PREVENTOR etc.

Photo Hydroionisation Cell Supply, Installation, Testing & Commissioning of PHOTO-HYDROIONISATION (PHI) cell comprising of quad metallic compound target/ hydrated cataytic matrix cell duly enclosed by a poly casing tube, with the capability to produce friendly oxidizers like hydro peroxides. The tube should be duly encased in poly tube to prevent glass or mercury leakage into the atmosphere. The cell will have built in fiber optic device as remote indication of this operation.The power / control cabling between the PHI units and the power source / controls shall be included in the cost. The equipment shall conform to UL 1598, CAN/ CSA 222, EN 60335-1, EN 60335-2-65, TUV, CSA, EU standards, certifications shall be submitted along with the technical submital. Refer technical specififcations for more details and compliance. These shall be suitable for the following capacities : Make: Ultrafresh / Zeco / RGF 2050 CFM/13.68 TR ( GF _ OLD )

Photo Hydroionisation Cell Supply, Installation, Testing & Commissioning of PHOTO-HYDROIONISATION (PHI) cell comprising of quad metallic compound target/ hydrated cataytic matrix cell duly enclosed by a poly casing tube, with the capability to produce friendly oxidizers like hydro peroxides. The tube should be duly encased in poly tube to prevent glass or mercury leakage into the atmosphere. The cell will have built in fiber optic device as remote indication of this operation.The power / control cabling between the PHI units and the power source / controls shall be included in the cost. The equipment shall conform to UL 1598, CAN/ CSA 222, EN 60335-1, EN 60335-2-65, TUV, CSA, EU standards, certifications shall be submitted along with the technical submital. Refer technical specififcations for more details and compliance. These shall be suitable for the following capacities : Make: Ultrafresh / Zeco / RGF 2250 CFM/15.06 TR ( GF _ NEW )

Photo Hydroionisation Cell Supply, Installation, Testing & Commissioning of PHOTO-HYDROIONISATION (PHI) cell comprising of quad metallic compound target/ hydrated cataytic matrix cell duly enclosed by a poly casing tube, with the capability to produce friendly oxidizers like hydro peroxides. The tube should be duly encased in poly tube to prevent glass or mercury leakage into the atmosphere. The cell will have built in fiber optic device as remote indication of this operation.The power / control cabling between the PHI units and the power source / controls shall be included in the cost. The equipment shall conform to UL 1598, CAN/ CSA 222, EN 60335-1, EN 60335-2-65, TUV, CSA, EU standards, certifications shall be submitted along with the technical submital. Refer technical specififcations for more details and compliance. These shall be suitable for the following capacities : Make: Ultrafresh / Zeco / RGF 2250 CFM/15.06 TR ( FF _ NEW )

Photo Hydroionisation Cell Supply, Installation, Testing & Commissioning of PHOTO-HYDROIONISATION (PHI) cell comprising of quad metallic compound target/ hydrated cataytic matrix cell duly enclosed by a poly casing tube, with the capability to produce friendly oxidizers like hydro peroxides. The tube should be duly encased in poly tube to prevent glass or mercury leakage into the atmosphere. The cell will have built in fiber optic device as remote indication of this operation.The power / control cabling between the PHI units and the power source / controls shall be included in the cost. The equipment shall conform to UL 1598, CAN/ CSA 222, EN 60335-1, EN 60335-2-65, TUV, CSA, EU standards, certifications shall be submitted along with the technical submital. Refer technical specififcations for more details and compliance. These shall be suitable for the following capacities : Make: Ultrafresh / Zeco / RGF 1420 CFM/9.48 TR ( FF _ OLD )

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of VRF Outdoor. Also it should include first oil & gas charge & commissioning etc. complete 12 HP

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of VRF Outdoor. Also it should include first oil & gas charge & commissioning etc. complete 18 HP

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of VRF Outdoor. Also it should include first oil & gas charge & commissioning etc. complete 16 HP

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of VRF Outdoor. Also it should include first oil & gas charge & commissioning etc. complete 22 HP

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of VRF Outdoor. Also it should include first oil & gas charge & commissioning etc. complete 24 HP

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of Regular Cassette Units Indoor with accessaries like required Cassette panel, support plate, , Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. ( Ground Floor ) 1.6 TR

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of Regular Cassette Units Indoor with accessaries like required Cassette panel, support plate, , Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. ( Ground Floor ) 2.0 TR

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of Regular Cassette Units Indoor with accessaries like required Cassette panel, support plate, , Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. ( Ground Floor ) 2.5 TR

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of Regular Cassette Units Indoor with accessaries like required Cassette panel, support plate, , Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. ( Ground Floor ) 3.2 TR

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of Regular Cassette Units Indoor with accessaries like required Cassette panel, support plate, , Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. ( Ground Floor ) 4.0 TR

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of Regular Cassette Units Indoor with accessaries like required Cassette panel, support plate, , Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. ( Ground Floor ) 4.6 TR

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of Regular Cassette Units Indoor with accessaries like required Cassette panel, support plate, , Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. ( First Floor ) 1.6 TR

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of Regular Cassette Units Indoor with accessaries like required Cassette panel, support plate, , Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. ( First Floor ) 2.3 TR

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of Regular Cassette Units Indoor with accessaries like required Cassette panel, support plate, , Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. ( First Floor ) 2.5 TR

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of Regular Cassette Units Indoor with accessaries like required Cassette panel, support plate, , Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. ( First Floor ) 3.2 TR

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of Regular Cassette Units Indoor with accessaries like required Cassette panel, support plate, , Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. ( First Floor ) 4.0 TR

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of Regular Cassette Units Indoor with accessaries like required Cassette panel, support plate, , Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. ( First Floor ) 4.6 TR

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of Compact Cassette Units Indoor with accessaries like required Cassette panel, support plate, , Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. ( Ground Floor ) 1.1 TR

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of Compact Cassette Units Indoor with accessaries like required Cassette panel, support plate, , Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. ( First Floor ) 1.1 TR

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of Compact Cassette Units Indoor with accessaries like required Cassette panel, support plate, , Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. ( First Floor ) 1.3 TR

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of Compact Cassette Units Indoor with accessaries like required Cassette panel, support plate, , Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. ( First Floor ) 1.6 TR

Lifting, Shifting, Positioning, Installtion, Testing & Commissioning of High Static Duct Type Units Indoor with accessaries like required support plate,Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. 6.4 TR

Lifting, Shifting, Assembling, Positioning, Installtion, Testing & Commissioning of Treated Fresh Air Type Units Indoor with accessaries like required support plate,Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. 2050 CFM/13.68 TR - 55mm wg Total static pressure ( GF _ OLD )

Lifting, Shifting, Assembling, Positioning, Installtion, Testing & Commissioning of Treated Fresh Air Type Units Indoor with accessaries like required support plate,Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. 2250 CFM/15.06 TR - 55mm wg Total static pressure ( GF _ NEW )

Lifting, Shifting, Assembling, Positioning, Installtion, Testing & Commissioning of Treated Fresh Air Type Units Indoor with accessaries like required support plate,Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. 2250 CFM/15.06 TR - 55mm wg Total static pressure ( FF _ NEW )

Lifting, Shifting, Assembling, Positioning, Installtion, Testing & Commissioning of Treated Fresh Air Type Units Indoor with accessaries like required support plate,Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. 1420 CFM/9.48 TR - 55mm wg Total static pressure ( FF _ OLD )

Lifting, Shifting, Assembling, Positioning, Installtion, Testing & Commissioning of Vetilation Fans with accessaries like required support plate,Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. 1410 CFM / 20MM ESP - Exhaust Air Fan

Lifting, Shifting, Assembling, Positioning, Installtion, Testing & Commissioning of Vetilation Fans with accessaries like required support plate,Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. 1270 CFM / 20MM ESP - Fresh Air Fan

Lifting, Shifting, Assembling, Positioning, Installtion, Testing & Commissioning of Vetilation Fans with accessaries like required support plate,Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. 2420 CFM / 20MM ESP - Exhaust Air Fan

Lifting, Shifting, Assembling, Positioning, Installtion, Testing & Commissioning of Vetilation Fans with accessaries like required support plate,Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc. 2110 CFM / 20MM ESP - Fresh Air Fan

Lifting, Shifting,Positioning, Installtion, Testing & Commissioning of Copper refrigerant joints with accessaries like required support plate,Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws etc.

Lifting, Shifting,Positioning, Installtion, Testing & Commissioning of TFA Connection Kit with accessaries like required support plate,Threaded rods of 10mm Thk, Anchor fastner, nut bolts, Washer & screws, cable termination with lugs, copper connection to kit etc.

Lifting, Shifting,Positioning, Installtion, Testing & Commissioning of Cordless Remote with baseplate, nut bolts, Washer & screws etc.

Lifting, Shifting,Positioning, Installtion, Testing & Commissioning of Corded Remote with cable termination with lugs, baseplate, nut bolts, Washer & screws etc.

Lifting, Shifting,Positioning, Installtion, Testing & Commissioning of Central Remote with cable termination with lugs, baseplate, nut bolts, Washer & screws etc.

Lifting, Shifting,Positioning, Installtion, Testing & Commissioning of TFA Starter Pane with cable termination with lugs,nut bolts, Washer & screws etc.

SITC OF Refrigerant Piping between indoor & ourdoor units Refrigerant Hard copper piping suitable gauge as sugested by OEM of VRF System duly insulated with required 19mm thickness closed cell electrometric Nitrile Rubber covered interconnecting indoor & outdoor unit. Metallic foil membrane shall be applied to provide resistance against breakdown due to UV radiation for exposed portion of the Rubber Insulation on terrace. The refrigerant piping shall be laid with proper supports as required. Suction & Descharge circuit shall be considered as a single circuit to measure the length. Single length of circuit shall be considered for each unit to measure the length

SITC of Condensate Piping (FOR ALL AIR CONDITIONERS ) Providing and fixing in position the following PVC condensate drain pipes cut to required lengths and necessary elbows, tees and reducers, hanger, supports, fittings and with 12mm thk. Nitrile Rubber Insulation as per drawing. Quoted price shall be inclusive of adhesive, nitrile rubber tape, supports etc. as per specification and drawing. Make : Finolex / Astral / Ashirvad 25mm ( 10 KG )

SITC of Condensate Piping (FOR ALL AIR CONDITIONERS ) Providing and fixing in position the following PVC condensate drain pipes cut to required lengths and necessary elbows, tees and reducers, hanger, supports, fittings and with 12mm thk. Nitrile Rubber Insulation as per drawing. Quoted price shall be inclusive of adhesive, nitrile rubber tape, supports etc. as per specification and drawing. Make : Finolex / Astral / Ashirvad 32mm ( 10 KG )

SITC of Condensate Piping (FOR ALL AIR CONDITIONERS ) Providing and fixing in position the following PVC condensate drain pipes cut to required lengths and necessary elbows, tees and reducers, hanger, supports, fittings and with 12mm thk. Nitrile Rubber Insulation as per drawing. Quoted price shall be inclusive of adhesive, nitrile rubber tape, supports etc. as per specification and drawing. Make : Finolex / Astral / Ashirvad 50mm ( 10 KG )

SITC of Control Cabling ( FOR ALL AIRCONDITIONERS ) 2.5 Sq.MM x 3C Shielded Control cabling with necessary conduiting between indoor and outdoor units

Air Distribution System: SITC of Metal Ducts Supply, fabrication, installation of sheet metal RECTANGULAR/ROUND DUCTS complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts & nuts, canvas connections , adjustable splitter , guide vanes including air balancing with necessary connections etc., in accordance with the approved shop drawings and as per the specifications : GI Sheet : Essar / Jindal / Tata RECTANGULAR DUCT 0-750mm : 24 Gage (0.70mm) (4 Bolt TDC)

Air Distribution System: SITC of Metal Ducts Supply, fabrication, installation of sheet metal RECTANGULAR/ROUND DUCTS complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts & nuts, canvas connections , adjustable splitter , guide vanes including air balancing with necessary connections etc., in accordance with the approved shop drawings and as per the specifications : GI Sheet : Essar / Jindal / Tata RECTANGULAR DUCT 750-1350mm : 22 Gage (0.85mm) (4 Bolt TDC)

SITC of Duct line Acoustic Treatment High Density option (For low frequencies) : Duct acoustic lining material shall be Nitrile Rubber Open cell foam. Thermal conductivity of the insulation material shall not exceed 0.049 W/moK at an average temperature of 20oC. Density of the nitrile rubber shall be 200 ± 10% Kg/m3. The material should withstand maximum surface temperature of +85oC and minimum surface temperature of -20oC. The material should conform to Class 1 rating for surface spread of Flame in accordance to BS 476 Part 7 & UL 94 (HBF, HF 1) in accordance to UL 94, 1996. The insulation shall pass Air Erosion Resistance Test in accordance to ASTM Standard C 1071-05 (section 12.7), from an independent accredited testing agency. Thk- 13mm MAKE : Armacell / Aeroflex / K Flex

SITC of Duct line Thermal Treatment Thermal insulation material for Duct & Pipe insulation shall be Closed Cell Elastomeric Nitrile Rubber foam .Density of the nitrile rubber shall be 40-60 Kg/m3.Thermal conductivity as per ASTM C 518 of the insulation material shall not exceed 0.0352 W/moK at an average temperature of 10oC. The insulation shall have fire performance such that it passes Class 1 as per BS476 Part 7 for surface spread of flame as per BS 476 and also pass Fire Propagation requirement as per BS476 Part 6 to meet the Class ‘O’ Fire category as per 1991 Building Regulations (England & Wales) and the Building Standards (Scotland) Regulations 1990 The insulation material shall also be fire rated for Class V 0 as per UL 94. Water diffusion factor shall not be less than μ>7000 for plain sheets. Thk.-13mm MAKE : Armacell / Aeroflex / K Flex

SITC of Air Terminals Supply and Installation of Air grilles, diffusers & louvers, complete with all accessories, supports, anti smudge ring & removable core etc., to compete the work as per specifications, drawings and all related documents. Color to be confirmed with architect Make : Airflow / Sachins / Trox Air Grille with powder coated extruded & aluminium volume control damper

SITC of Air Terminals Supply and Installation of Air grilles, diffusers & louvers, complete with all accessories, supports, anti smudge ring & removable core etc., to compete the work as per specifications, drawings and all related documents. Color to be confirmed with architect Make : Airflow / Sachins / Trox GI Duct Volume control damper

SITC of Fire retardant canvass connection

MS FRAME WORK M. S. frame type structure for installing outdoor units duly epoxy coated / galvanized.

ALL IN ALL AMC RATES APPLICABLE AFTER GUARANTEE PERIOD: (RATE SHOULD BE INCLUSIVE OF ALL TAXES) For 1st Year After Completion of DLP

ALL IN ALL AMC RATES APPLICABLE AFTER GUARANTEE PERIOD: (RATE SHOULD BE INCLUSIVE OF ALL TAXES) For 2nd Year After Completion of DLP

ALL IN ALL AMC RATES APPLICABLE AFTER GUARANTEE PERIOD: (RATE SHOULD BE INCLUSIVE OF ALL TAXES) For 3rd Year After Completion of DLP

ALL IN ALL AMC RATES APPLICABLE AFTER GUARANTEE PERIOD: (RATE SHOULD BE INCLUSIVE OF ALL TAXES) For 4th Year After Completion of DLP

ALL IN ALL AMC RATES APPLICABLE AFTER GUARANTEE PERIOD: (RATE SHOULD BE INCLUSIVE OF ALL TAXES) For 5th Year After Completion of DLP

SHANTI PROCON LLP

C E INFRA (INDIA)