SPECIAL REPAIRS TO BLDG NO P-28 AND ALLIED INFRA AT SAPPER ENCLAVE UNDER GE SOUTH UDHAMPUR

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

M&L for pre painted galvalume aluminium zinc coating GI based corrugated sheets 0.60 mm thick of any colour having tensile strenght of 550/MPA as in roof covering, cladding to wall fixed with self taping screws complete all as specified and as directed.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.60 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F 10 mm thick PVC Polycarbonate Fibre glass reinforced translucent sheeting (any colour) fixed with coach screw and washer in roof, wall etc, with two 150-200mm side lap and aluminium strip on joints with rubber gasket/ self tapping screws complete all as specified and as directed.

S & F 1mm thick Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges, dia 150mm fixed with MS flats 25x3mm @ 1500mm c/c welded to MS sections complete all as specified and as directed.

Dismantling wrought iron or mild steel work in any description not otherwise specifically provided for complete all as specified and as directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-16 complete all as specified and as directed.

S&F welded steel wire fabric mesh weight n.exc 4 Kgs per sqm fixed to steel members complete all as specified and directed.

Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for 10-12 mm thick gypsum boards seamless false ceiling including sunk or raised moulding or cop design as approved, moisture resistant, including GI hanging wires & frames with intermediate, perimeter channel ceiling channel, along nuts and bolts connecting plates gypsum boards, dry wall screws soffits cleats, ceiling section, rawel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface complete all as specified and directed by Engr-in-Charge. Note : (a) Design of ceiling board as approved by Engr-in-Charge. (b) GI grid/hanging system shall be of the same make as of false ceiling manufacturer