GE (N) P/TOKEN- 13 OF 2023-2024 REPAIRS TO JOINERY, PLUMBING, SANITARY FITTINGS AND MISC ITEMS IN THE AREA OF HQSC, CESC AND CERTAIN AREA OF AGE B/R (CENTRAL) OF GE (NORTH) PUNE

Amount

Material and labour for roof tiles Mangalore pattern, interlocking at side joints, laid dry including dismantling single layer Mangalore pattern or similar tiles in roofing and rubbish off the premises complete all as specified and as directed.

- Ditto - all as per serial item No. 1.00 here-in-before but except tiles.

Material and labour for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:6) etc incl dismantling of tile and rubbish off the premises complete all as specified and as directed.

Dismentling wooden battens of any description and any size including filling fillets spaced exc 15 cms complete all as specified and as directed.

Dismentling wooden scantling of size 40sqcm and over in section and in any position and position

Material and labour for second class hard wood, clean sawn, in scantling timber framed work all as specified and as directed.

'- Ditto - all as per serial item No. 6 here-in-before but except timber.

M&L AC Eves/Weather Boarding of AC Sheet 12 to 15mm thick, complete any size and shape including dismantling of existing all as specified and as directed. Make: Shera wall/Everest/ V-board/Charminar or Eqvt.

Dismantling plain or corrugated steel sheeting , any gauge or any thickness, as in roof coverings complete all as directed.

Supply and fix for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.

Supply and fix for 0.63mm thick plain, galvanised mild steel sheeting in ridges, hips, Valley gutters, drip and staright flashings ( length & girth as fixed) with garde of zinc coating 275 complete all as specified and as directed.

Dismentling structual steel work including doors, gates but excluding framed trusses etc.

S&F of mild steel work in tubular trusses as in Roof battens complete using ERW or induction butt welded tubes conforming to IS1161-1998 grade ST.-240, fixed independently with angle iron cleats or connecting pieces complete all as specified and directed.

Supply and fix for mild steel work in tubular /square/rectangular rafters, purlins etc including special shaped washer etc. complete using hollow mild steel sections round, square or rectangular for structural use as in main and cross beams, hip and jack rafters, purlins conforming to IS 4923:1997 fixed with angle cleats or other connecting plates complete all as specified and as directed.

S&F mild steel rolled section as in main cross beams purlins, rafters and running rails fixed independently with angle iron cleats or connecting pieces conforming to Gde Fe-410-W, Gde E-250, quality A complete all as specified and directed.

M&L for mild steel framed work such as in doors or gates etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

Supply and fix for 1.00mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified anda as directed.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Supply and fix in repairs aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc including taking out old ventilators complete all as specified and directed. Section - 63 x 25mm, No- 14001

Supply and fix in repairs aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc includung taking out old windows complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Dismantling wooden boarding/ partition any description and in any position complete all as directed.

Supply and fix for aluminium powder coated partition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. Sections : SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407

Supply and fix fully glazed single/ double leaf openable door, using ‘Jindal ' aluminium powder coated sections on door floor spring, pivots, with 5 mm thick glass in panels fixed with aluminium glazing clips section No. 19381 and 19352 and PVC rubber beading all around including with 1” interlock and handle, two lever door lock, sliding wheel including taking down existing complete all as specified and as directed. Jindal section Nos : Top-19528, Middle – 19575, Bottom – 19530, Vertical – 19526, 1” Interlock (20939), 1” Handle (20602)

Labour & Equipments for the mirror polish for existing Kota Stone all as per specified and as directed.

Taking Down Wall panelling of any description, in any shape and size existing all as directed.

M&L Solid PVC Wall Lining/panelling consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as specified and directed.

M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing and as specified and directed.

M&L 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site all as specified and directed.

Supply and fix in repair for brackets for drapery/ curtain rod, decorative type, stainless steel as per sample kept in GE (N) Pune office complete all as specified and as directed.

Supply and fix in repairs for drapery/ curtain rod of 25mm dia, decorative type, stainless steel complete all as specified and as directed.

Supply and fix in repairs for antique rod of 25mm bore as in curtain rod decorative type section as per sample kept in GE (N) Pune office complete all as specified and as directed.

Supply and fix in repairs for antique double rod brackets to suit the curtain rod of 25mm dia, decorative type brass coated section complete all as specified and as directed.

Supply and fix in repairs floor door stopper of brass body and tongue with hard drawn steel spring of over all length of cover plate 150mm complete all as specified and as directed.

Supply and fix in repairs for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm all as specified and as directed.

Supply and fix in repairs for 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

Supply and fix in repair brass mortice lock, vertical type, size 100mm grade-1 of 4 levers with duplicate key complete all as specified and as directed. Make Godraj/Europa/Cuba or equivalent.

Dismantling asbestos/ Galvalume/ fibre sheet cement (plain, corrugated, semi corrugated etc.) sheets in roof coverings complete all as directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

Supply and fix repair for fibre glass reinforced translucent Polycarbonate Plain/ corrugated sheeting 2.00 mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.

Material and labour for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof, fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and as directed.

Material and labour for 6mm thick asbestos cement, two piece adjustable plain serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and as directed.

Dismantling of wall/ceiling board of any description and any thickness including cover fillets, ceiling grid etc complete all as directed.

Material and labour for 8 to 10mm thick PVC prelaminated Gypsum board false ceiling board on and including GI powder coated grid work of size 600 mm x 600 mm with using 32.0 mm x 20 mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 25 mm x 25 mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm complete all as specified and as directed. Make :- Armstrong, Diaken, New Age, Gyprock as approved by GE.

Material and labour for french polishing on wooden surface of any description, width or girth including cleaning and preparing the surfaces with a coat of wood filler and applying two or more coats of french polish till the desired finish is obtained complete all as specified and as directed.

Material and labour for applying two or more coats of melamine polish with spray guns, compressor etc complete till fine glossy surface is obtained complete all as specified and as directed on old treated wooden floor surface of any description.

- Ditto- all as per serial item No. 45 here-in-before but on wooden door, window surfaces, wall panelling and staircase etc.

Material and labour for preparation of old treated plastered or unplastered/ concrete surfaces by brooming down with steel brush over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old surfaces of walls and applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of old decorated platstered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of old treated plastered or unplastered surfaces of wall by removing all loose paints, nails etc, filling holes, depression etc by Birla wall care putty, smoothen the surface by rubbing with sand paper and applying one coat of acrylic distemper complete all as specified and as directed.

Material and labour for preparation of old treated plastered or unplastered surfaces of ceiling and applying one coat of acrylic distemper complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old painted wooden/asbestos surface of ceiling and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old treated wooden surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for complete removal of existing treatment on walls using steel wire brush , sanding machine, rubbing with emery papers etc and washing, rubbing down and stopping of distempered and painted surfaces, preparing surfaces ready to receive new finish complete all as directed.

Material and labour for complete removal of existing treatment on ceiling using steel wire brush , sanding machine, rubbing with emery papers etc and washing, rubbing down and stopping of distempered and painted surfaces, preparing surfaces ready to receive new finish complete all as directed.

Material and labour for applying one coat of alkali resistant priming paint on walls complete all as specified and as directed.

Material and labour for appyling one coat of alkali resistant priming paint on ceiling complete all as specified and as directed.

Material and labour for appying two coats of acrylic distemper of approved tint on wall surfaces complete all as specifie and as directed.

Material and labour for appyling two coats of acrylic distemper of approved tint on ceiling surfaces complete all as specifie and as directed.

Material and labour for applying one coat of white cementitious putty on wall and making the surfaces smooth by rubbing with sand paper to achieve finished surface complete all as specified and as directed.

Material and labour for applying one coat of white cementitious putty on ceiling and making the surfaces smooth by rubbing with sand paper to achieve finished surface complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces of wall by removing all loose paints, nails etc, filling holes, depression etc by Birla wall care putty, smoothen the surface by rubbing with sand paper and applying one coat of lustre paint (oil based) complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces of ceiling by removing all loose paints, nails etc, filling holes, depression etc by Birla wall care putty, smoothen the surface by rubbing with sand paper and applying one coat of lustre paint (water based)/ Royale of Asian or equivalent complete all as specified and as directed.

Material and labour for preparation of old treated plastered or unplastered surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.

M&L for preparation of old wall surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to mangalore tiles, roof, parapet, wall ,floor etc, on heritage buildings complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto building height 15mtr.

M&L for preparation of old decorated surfaces and applying one coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto building height 15mtr .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Material and labour for double charge coloured vitrified tiles 8 to 10mm thick (square/rectangular) polished, area of each tile exc. 0.18Sqm but not exc. 0.36 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Material and labour for double charge coloured vitrified ceramic tiles of size 600mm x 300mm x 8 to 10 mm thick as in vertical surface, pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Material and labour for double charge coloured Highlighter vitrified ceramic tiles of size 600mm x 300mm x 8 to 10 mm thick as in vertical surface, pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles of size 300mm x 300mm x 7mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 20mm thick screed bed in cement mortar (1:6) as in floors complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles of size 400mm x 400mm x 7mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 20mm thick screed bed in cement mortar (1:6) as in floors complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 300mm x 200mm x 7mm thick of colour as in dado/ skirting and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in dado/ skirting of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

Material and labour for Hilighter coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in dado/ skirting of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

M&L 25 mm thick plain cement concrete (1:2:4), type B-O (using 12.5mm graded stone aggregate) as in sub base to receive tile/claddings tops including demolition of existing cement concrete complete all as specified and directed.

Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M&L Brick work with fly ash bricks, conforming to IS- 12894:2002, Non modular, class designation 75, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork/block masonry built in cement mortar and rubbish off the premises complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to wall complete all as specified and as directed by Engineer-in-charge.

Material and labour for preparation of New plastered wall surface and applying two coats of acrylic distemper over a coat of alakli resistant primer over a thin layer of wall care cementeous putty complete all as specified and as directed.

Dismantling of stone slabs,cudappah, of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified.

Material and labour for machine cut cudappah stone slab 20-25 mm thick as in lintels, shelves, vertical surface, fixed with neat cement slurry or arldite, including rubbing and polishing complete all as specified and as directed

Material and labour for 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as directed.

M&L for making hole and fixing the metalic packer for hydrophobic PU foam and sealer without distrubing existing structure as per manufcturers instrction and froming agent like coreseal 357A/ coreseal 357C for carrying out nondistrctive waterproofing treatment of sunkun portion slab, floor and walls of bathroom, WC/WHB and floor traps (Combine Unit) by using constrction chemical methods such as hydrophobic PU grouting, epoxy coating etc including cleaning of surfaces with wire brush, detecting the sources of leakage and reapairing, removing/ taking down unsound treatment/ surfaces and followed by material and labour for second course injection of resin like Coreseal 135A/ 135B without distrurbing existing structure complete all as per manufacturers instrctions and as directed by Engr- In- Charge. Make- Buildcore Chemicals/ Pidilite/ Chemistic/ Fosrock as approved.

Supply and fix in repairs for vitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed. Make :- Hindware , catalogue No. 20028/ 20024 Constellation, 21038 cistern, pastel (complete set) or equivalent from Cera/Parryware. Note :- If Cat No. is revised, equivalent cat No. from latest catlauge shall be considered.

Supply and fix in repairs for vitreous china EWC of white colour with plastic water closet seat closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, including connection to drain or out going pipe and to PVC flusing pipe, antisyphonage pipe and all necessary fittings etc complete all as specified and as directed.

Supply and fix in repairs for vitreous china, squatting pan of 'Orissa' pattern, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and integral foot rests any pattern, including provision of lime concrete bedding, 10 litres capacity PVC low level flushing cistern, all internal fittings, inlet, outlet pipe connections etc complete all as specified and as directed.

Supply and fix in repairs for 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including bracket complete all as specified and as directed.

Supply and fix in repairs for 15mm dia bib cock, chromium plated, fancy type with flange, screwed for iron pipe or for ferrule all as per Cat No. PIS-06 (Neptune Series) of make Prayag or equivalent complete all as specified and as directed.

Supply and fix in repair for 15mm dia PVC connection 450mm long including PTMT check nuts etc complete all as specified and as directed

Supply and fix in repair for 15 mm bore bib cock chromium plated, fancy type with flange, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as per Cat No. 7306 of make Prayag or equivalent complete all as specified and as directed.

Supply and fix in repairs 15 mm bore pillar cock, with chromium plated, fancy type high pressure screwed for iron pipe all as per Cat No. 9802 of make Prayag or equivalent complete all as specified and as drected.

Supply and fix in repairs for 15mm dia stop cock concealed with flange (male or female thread), chromium plated pressure screwed for iron pipe all as per Cat No. 7318/20 of make Prayag or equivalent complete all as specified and as directed.

Supply and fix in repairs for 15mm dia angle cock with flange, chromium plated, high pressure screwed for iron pipe all as per Cat No. 8510 of make Prayag or equivalent complete all as specified and as directed.

Supply and fix in repairs for 15mm dia bib tap long body (old handle) with flange PTMT any colour high pressure screwed for iron pipe all as per Cat No.124-0 (Standard Series) of make Prayag or equivalent complete all as specified and as directed.

Material and labour in repair for cast iron Nahani trap, with grating of diameter of outlet 75mm including jointing to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded broken stone aggregates) complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) gully trap 150mm, setting and jointing with solvent cement complete all as specified and as directed.

Material and labour for removing of plants, bushes, weeds with roots from walls, roof, chajja, canopy, parapets, roof kerbs, around water tanks, stagings, outlets junctions of water pipe lines , waste water pipe, bends and filling the disturbed area with cement concrete (1:1.5:3) or cement mortar (1:3) using water proofing compound as per manufacturer's instruction and making the patch finished as per surroundings complete all as specified and as directed. (Note: Rate quoted is deemed to be included for scaffolding, safety measured required for working on or up to height of 15 metres vertical slopes)

Supply and fix in repairs spindel of wall mixer/ basin mixer any size/ type and in any position complete all as specified.

Supply and fix in repairs washer for flush tank , wall mixer and taps etc of any size/ type and in any position complete all as specified.

S&F in repair Cabinet mirror plastic body for toilet of size 350x450mm with 4mm thick looking mirror complete all as specified.Make : Prayag/Polytuff.

Resecuring or easing and adjusting without taking down shutter of any description exc. 1sqm but n.exc 2.00 Sqm complete all as specified and as directed by Engr-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.

Material and labour for second class hardwood, plain, solid straigtht chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed .

Taking down shutters of any description, area not exc.1 sqm each complete all as directed.

Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as directed.

Taking down shutters of any description, area exc.2sqm each complete all as specified and as directed.

Supply and fix 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and as directed

Supply and fix 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and as directed.

Supply and fix stainless steel wire cloth 0.63 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed

S&F factory made 100% solid wood plastic composite (WPC) 28 to 30 mm thick board as in door shutter complete all as specified and directed. Make: Rajshri/ Sintex/Duraplast/Accucell

S&F factory made 100% solid wood polymer composite (WPC) door frame, single rivet 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum complete all as specified and directed.NOTE: During fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. Make: Rajshri/ Sintex/Duraplast/Accucell

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, ISI marked, complete all as specified and as directed.

Supply and fix 300mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts, ISI marked, complete all as specified and as directed.

Supply and fix 200mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.

Supply and fix 150 mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.

Supply and fix butt hinges, 100mm size, mild steel cold rolled, medium weight complete all as specified and as directed.

Supply and fix 75mm size butt hinges, extruded brass with mild steel hinge pin, bright polished and fixed type D-11 complete all as specified and as directed.

Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm all as specified and as directed.

Supply and fix 100mm size brass handles, extruded, fabricated type, polished complete all as specified and as directed.

Supply and fix 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

L.T Associate

M/S - R K CONSTRUCTIONS

M/S Eknath agencies

J P ASSOCIATES