GE863/EWS-T-13 OF 2022-23

Amount

Dismantling of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc. complete all as specified and directed.

Dismantling of floor,hearth or wall tilling including cement mortor bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal from site , complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal from site ,complete all as specified and directed.

Taking down chowkats or frames (without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and as directed.,

Taking down chowkats or frames (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and as directed.

Taking down Shutters of any description exc 1.0 sqm and n.exc 2 sqm each complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, complete, all as specified and as directed.

M&L for 25mm thick PCC (1:2:4), type B0 using 12.50mm graded stone aggregate as in floor, including rough finished with out using extra cement complete all as specified and directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in floor and finished even and smooth without using extra cement, complete, all as specified and directed.

M&L for providing 75 mm thick cement concrete (1:3:6)type C-1, using 20mm graded crushed stone aggregates as in plinth protection etc., surface finished even and smooth without using extra cemment ,complete, all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor laid over and including 15 mm thick screed bed in cement mortar 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match colour tiles complete, all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floor laid over and including 15 mm thick screed bed in cement mortar 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cment to match colour tiles, complete, all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface 350x250x7mm/ 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match , over and including 10mm thick rendering in cement mortar 1:4 ,complete, all as specified and directed.

Material and labour for machine cut kota stone slab 18mm to 20 mm thick (of size not less than 55 cm x 55 cm) laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) over and including cement screed bed 20 mm thick in cement mortar (1:6) including rubbing and mirror polishing, complete all as specified and directed.

Material and labour for machine cut kota stone slab 18mm to 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) but as in skirting over and including 10mm thick plaster in cement mortar (1:4) on brick work or concrete surfaces, complete, all as specified and directed.

M&L for Granite (of any type) work ,18mm to 20 mm thick, (table rubbed and polished) in steps jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar (1:4) including pointing in white cement (1;2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4, complete, all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 but EXCEPT STONE complete all as specified and directed.

M & L for providing precast cement concrete Type C-1 ,(1:3:6 )using 20mm graded stone aggregate and set in cement mortar 1:6 as bond stone, complete, all as specified and directed.

M & L for providing cement concrete Type C1, 1:3:6, using 20mm graded stone aggregate as in coping etc., complete, all as specified and directed.

M&L for 10 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth without usning extra cement.

M & L for rendering 15mm thick on stone walling cement mortar, 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Supply only Integral water proofing compound (WPC) complete all as specified and as directed.

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash, complete, all as specified and directed.

M&L for preparation of old treated wooden surfaces of any description exceeding 10 cms width or girth and applying one coat of varnishing over wood filler coat of thin varnish complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described over 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over priming coat of chalk whitening ,complete, all as specified and as directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

Removing of old unserviceable water storage PVC tank of capacity exc 250 & n exc 500 litres of any type after and including disconnecting of existing pipe line, ball valve, air pipe etc and supply and fix new rotational moulded polyethylene water storage tank 500 ltrs capacity (cylindrical vertical with closed top ,with screwable lid) , three layered ,ISI MARKED , hoisted and fixed in position at any height including reconnetcing/refixing of pipes inlet , out let andair pipe, including S&F 20 mm bore ball brass valves, high pressure, with polythene float and flynut ball valve, and testing complete all as specified and directed.

Removing of old unserviceable water storage PVC tank of capacity exc 500 & n exc 1000 litres of any type after and including disconnecting of existing pipe line, ball valve, air pipe etc and supply and fix new rotational moulded polyethylene water storage tank 1000 ltrs capacity (cylindrical vertical with closed top ,with screwable lid) , three layered ,ISI MARKED , hoisted and fixed in position at any height including reconnetcing/refixing of pipes inlet , out let andair pipe, including S&F 20 mm bore ball brass valves, high pressure, with polythene float and flynut ball valve, and testing complete all as specified and directed.

S & F in repair PUF insulated cylindrical tank of capacity 500 litres vertical type, double layer, duly filled with PUF insulation superior quality to resist in temperature - 30 to + 35 degree centigrade and hoisted on platform complete with making pipe line connection, complete ,all as as specified and directed.

S & F in repair PUF insulated cylindrical tank of capacity 1000 litres vertical type double layer duly filled with PUF insulation superior quality to resist in temperature - 30 to + 35 degree cenfigrade and hoisted on platform complete with making pipe line connection, complete, all as as specified and directed.

S & F in repair 16mm bore of pipes in 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete with insulation to walls, ceilings or in floors etc. complete , all as specified and directed.

S & F in repair 20mm bore of pipes in 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete with insulation, complete , all as specified and directed.

S & F 20mm bore of pipe PP-R Gate valves (brass insert) as per requirement of the site complete, all as as specified and directed.

S & F 25mm bore of pipe PP-R Gate valves (brass insert) as per requirement of the site complete, all as as specified and directed.

S & F 20mm bore of pipe PP-R Ball valves (brass insert) as per requirement of the site complete, all as as specified and directed.

S&F in repairs bib tap, 15 mm bore dia, CP, fancy type, cast copper alloy with crutch or butter fly handle, scewed down, screwed for iron pipe or for brass ferrule complete all as as specified and directed.

S & F in repairs stop valves, 15mm bore dia, fancy type, chromium plated, screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15 mm bore dia pillar taps, fancy type, chromium plated, copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repairs 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed.

Supply and fixed in repair PVC connections, 45cm long and 15mm dia with chromium plated brass nuts and PVC washers on both ends,complete all as specified and directed.

S&F in repairs , first quality , Wash basins, vitreous china, white, flat back of size 550x400mm , including pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets, complete all as specified and directed. MAKE :- Wash basin : HINDWARE/PRAYAG/JAQUAR/PARRYWARE/CERA. Pillar tap : Shakti /ESS ESS/ PRIMA/ HINDWARE/CERA/JAQUAR.

Supply and fixing in repair ,PVC virgin polypropylene, valve less syphonic action type flushing cistern 10litre capacity, low level, white/coloured with inlet, ball valve with float and handle, including new brackets fixed in position, PVC bend/flush pipe 32mm dia, complete including connections to water mains with and including 15mm dia, 450mm long PVC connection pipes with PTMT check nuts (excluding taps), complete all as specified and directed. MAKE : HINDWARE/PRAYAG/JAQUAR/PARRYWARE/CERA

Supply and fixing in repair of existing water closet (squatt pattern) and foot rest with vitreous china (white) first quality water closet, Orissa pattern size 580x440mm with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet , complete including fixing of flush pipe with seat and making good the disturbed floor surfaces to match with existing and making connections serviceable complete all as specified and directed MAKE : HINDWARE/PRAYAG/JAQUAR/PARRYWARE/CERA

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover and flush pipe etc complete all as specified and directed.

S & F in repairs Vitreous China Half stall type urinals, white, with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S & F in repair Soap dish, stainless steel, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified and directed.

S & F in repairs 20 mm dia brass chromium plated tubular towel rail, D type, 60cm long between flanges complete all as specified and directed.

S & F cast iron floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate complete all as specified and directed.

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete, all as specified and directed.

S & F in repairs stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs Health faucet (ABS Body) mild steel, CP, 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl fixed in position complete all as specified and directed.Make :-Shakti /ESS ESS/ PRIMA/ HINDWARE/CERA/JAQUAR.

M&L 15 mm bore steel water tubing, medium grade, galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings ( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified and directed.

M&L 20 mm bore steel water tubing, medium grade, galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings ( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified and directed.

Supply and fixing in repair, PVC waste pipe for wash hand basin/urinals, 32mm dia and 80 cm long plain pipe, complete all as specified and directed.

S&F in repairs 40 mm dia PVC waste pipe for sink, complete all as specified and directed.

Checking of joinery (wooden/steel), iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door /windows by means of planer/chisling etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified and directed. Note : If any items required to be replaced, the same shall be measured and paid under respective items as 'S&F in repairs' and in that case this item will not be measured and paid.

S&F in repairs mild steel, chromium plated curtain rod 20mm dia with holder/bracket, stops, rollers etc. complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple,wooden beads or galvanised steel small nut and bolts etc. complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repairs 2nd class soft wood beads, straight (any size) for glazed or gauzed joinery, renewed, including miters etc. complete all as specified and directed.

S&F in repairs 100 mm long aluminium anodised hasp and staple with mild steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs 125 mm long aluminium anodised hasp and staple with mild steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and as directed.

S&F in repairs 150 mm long aluminium anodised hasp and staple with mild steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and as directed.

S&F in repairs aluminium alloy sliding door bolt 300 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs mild steel sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F in repairs 150 mm aluminium handles, cast type, anodised complete all as specified and directed.

S&F in repairs 125 mm aluminium handles, cast type, anodised complete all as specified and directed.

S&F 100 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed.

S&F 150 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed.

S&F in repairs 125 mm long mild steel pressed steel handle, oval type, stove enameled black complete all as specified and directed.

S&F in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed.

S&F 75 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.

S&F 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.

S&F floor door stopper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor.

S&F in repairs floor door stopper of 140 mm size, aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and as directed.

S&F 300 mm, mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs 300mm size MS helical door spring including roller and roller plate fixed to wooden or steel frames with welding etc. complete all as specified and directed.

S&F in repairs 18/19 mm thick block boards, grade-2 quality, interior grade, commercial type, fixed with screws as in shelves and shutters of cup board etc. complete all as specified and directed.

S&F in repair 18/19 mm thick prelaminated particle boards, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed.

S&F in repairs ply wood grade BWR type BB, 12 mm thick fixed to timber frame work with nails etc complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood plain framed, panelled shutter (any number of shutter) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood partical board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009) complete all as specified and directed.

S & F of 30 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009) complete all as specified and directed.

S&F plain, solid, 2nd class hard wood straight chowkhats and frames wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint etc complete all as specified and directed.

S&F MS flat iron as in hold fast etc, wall ties, hooks for hanging fans and similar small articles conforming to Fe-290-0 Gde-E-165 complete all as specified and directed.

S&F in repairs door closers of aluminium die cast body hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs complete all as specified and directed.

S&F 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and directed.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumbing work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof. Note : If any items required to be replaced, the same shall be measured and paid under respective items as 'S&F in repairs' and in that case this item will not be measured and paid.

S&F in repair C.P. grating 100mm square/round with or without hole ,complete, all as specified and directed.

S&F in repairs stainless steel toilet paper holder fixed with wooden gutties and screws to wall surfaces complete all as specified and directed. Shakti /ESS ESS/ PRIMA/ HINDWARE/CERA/JAQUAR.

Repair to aluminium door or window of any size, shape and description including easing, cutting, drilling, including provn of parts such as rubber gasket, blanket cloth, etc to make door or window fully functional complete all as specified and directed.

Supply and fixing in replacment of switch piano type 5 Amp, 230 Volt, flush button, single pole one way complete all as specified and directed.

Supply and fixing in replacement of socket outlet 3 pin, 5 Amp, 2-in-one, 230 Volt, flush type complete all as specified and directed .

Supply and fixing in replacement of switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed.

Supply and fixing in replacement of socket outlet 3 pin, 15 Amp, 2-in-one, 230 Volt, flush type, including 2 way PVC gang box to accommodate 15 amp switch and socket complete all as specified and directed.

S&F in replacement Bell push flush type 5/6 Amps complete all as specified and directed.

S&F in replacement Bell AC 230 volt, single pole, complete all as specified and directed.

S&F in replacement ceiling rose, 3 terminal complete all as specified and directed.

Supply and fixing in replacment of Switch socket combination 2 in 1, 5 Amp, 230 Volt, flush type with PVC gang box complete all as specified and directed.

Supply and fixing in replacment of Switch socket combination 2 in 1, 5/ 16 Amp, 230 Volt flush type with PVC gang box complete all as specified and directed.

Supply and fixing in replacment Modular switch 1 way, 6 Amp, 1 module, multipurpose, flush type, complete all as specified and directed.

Supply and fixing in replacment Modular switch 1 way 16Amp, 1 module, multipurpose, flush type, complete all as specified and directed.

Supply and fixing in replacment Socket, 6Amp - 2/3 pin, combined, 2 module, multipurpose, flush type, complete all as specified and directed.

Supply and fixing in relacment Socket, 16Amp - 2/3 pin, combined, 2 module, multipurpose, flush type, complete all as specified and as directed.

Supply and fixing in replacment of modular white cover plate with frame, 3 module complete all as specified and directed.

S & F in replacement 3 way modular PVC box complete all as specified and directed. NOTE: All modular items as mentioned above shall be make of ANCHOR PENTA to match with existing switches on site.

M&L in replacement lamp holder, PVC/ Polycarbonate type with back plate suitable of batten fittings complete all as specified and directed.

Supply and fixing in replacment surface & wall mounted LED 20W tube light fitting batten 4 feet, mirrorlite slim type with extruded aluminium housing alongwith 20W LED lamp PC body with all accessories complete all as specified and directed. Make: Crompton Cat No. LDLSR20-CDL or equivelent of Havells/Wipro/Philips/Bajaj.

Supply and fixing in replacment surface & wall mounted LED 10 watts tube light fitting batten 2 feet, mirrorlite slim type with extruded aluminium housing alongwith 10 watts LED lamp PC body with all accessories complete all as specified and directed. Make: Crompton Cat No. LDLL10-CDL or Equivalents in PHILIPS/HAVELLS/BAJAJ/WIPRO

Supply and fixing in replacement of LED 10 W Bulk head luminaire, compact modern design utility with high energy savings complete all as specified and directed. Make: Crompton Cat No. LBHP-10-CDL or equivelent of Havells/Wipro/Philips/Bajaj.

Supply and fixing in replacement 9 watts LED lamp of 4 hours backup, with auto switch on mechanism in case of power failure, works as regular 9w lamp in normal mode and a 4w lamp in backup mode complete all as specified and directed. Make: Crompton Cat No. LED9WDFINV4CDL or equivelent of Havells/Wipro/Philips/Bajaj.

Supply and fixing in replacement LED Lamp 9 Watt in lamp (Bulb) complete all as specified and directed. (Make-Crompton Cat No. B22/E27-CDL or equivalent in wipro/Havells/Philips/Bajaj

Supply and fixing in replacement LED Lamp 2.5 Watt in lamp (Bulb) holder warm white complete all as specified and directed. (Make-Crompton Cat No. LED 2.5W- E14 WW (warm white) or equivalent in wipro/Havells/Philips/Bajaj.

Supply and fixing in replacement LED Lamp 2.5 Watt in lamp (Bulb) holder warm white complete all as specified (Make-Crompton Cat No. LED 2.5W- E14 (Lense) WW (warm white) or equivalent in wipro/Havells/Philips

Supply and fixing in replacement LED Lamp 2.5 Watt in lamp (Bulb) holder warm white complete all as specified and directed. (Make-Crompton Cat No. LED 2.5W- E14 (Mushroom) WW (warm white) or equivalent in wipro/Havells/Philips

Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt complete all as specified and directed.

Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 4 way 240 volts, complete, all as specified and directed.

Supply and fixing in replacement MCBs, TPN, 63 Amps, 415 Volt complete all as specified and directed.

Supply and fixing in replacement MCBs, TPN, 40 Amps, 415 Volt complete all as specified and directed.

Supply and fixing in replacement MCBs, SPN, 40 Amps, 230V complete all as specified and directed.

Supply and fixing in replacement MCBs, SP, 6-20 Amps, 230V complete all as specified and directed.

M&L in replacement Sheet metal enclosure with two pin and earth plug and socket complete with one single pole and neutral MCB 20 Amp , 10 KA complete all as specified and directed.

S&F in replacement of thermostat suitable for 25/50 litres capacity Geyser complete all as specified and directed.

S&F in replacment of multifunction safety device (pressure release valve) suitable for 25/50 ltrs cap geyser ,complete, all as specified and directed.

S&F in replacement of heating element triangular type1500 Watt suitable for 25/50 litres capacity Geyser , complete, all as specified and directed.

S&F in replacement of heating element triangular type 2000 Watt suitable for 25/50 litres capacity Geyser complete all as specified and directed.

S&F in replacement of heating element circular type 1500 Watt suitable for 25/50 litres capacity Geyser complete all as specified and directed.

S&F in replacment of indicating lamp set red/ green colour complete all as specified and directed.

S&F in replacement of PVC flexible connection pipe, size 2 feet's ,suitable for Geyser hot water including washer complete all as specified and directed.

Supply and Fixing in replacement Air termination, single pointed, aluminium rod, 12mm dia and 300mm long complete all as specified and directed.

Supply and Fixing in replacement Test point terminal block made out of gun metal or phosphorus bronze, size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw, complete all as specified and directed.

Supply and fixing in replacement 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm dia suspension wire, one twin core cable flat or circular of size 16 Sqmm complete all as specified and directed.

Supply and fixing in replacment of LED driver 12 watts suitable for internal electric LED fittings including testing on completion complete all as specified and directed.

Supply and fixing in replacment of LED driver 36-40 watts suitable for internal electric LED fittings including testing on completion size complete all as specified and directed.

Supply and fixing in replacment house service bracket (hook type complete with 3.0 metre long, G.I. pipe, 40mm bore dia, medium grade, two nos 900 bends, M.S. hook and stay or guy complete all as specified and directed.

Supply and fixing in replacement PVC Casing Caping 1/2" (12/20mm) complete all as specified and directed.

Supply and fixing in replacement PVC Casing Caping 3/4" (20/25mm) complete all as specified and directed.

Supply and fixing in replacement PVC Casing Caping 1" (25/32mm) complete all as specified and directed.

Supply and fixing in replacement Thimble for 10 Sqmm cable, complete all as specified and directed.

Supply and fixing in replacement Thimble for16 Sqmm cable,complete all as specified and directed.

Supply and fixing in replacement Thimble for 25 Sqmm cable, complete all as specified and directed.

Supply and fixing in replacement Thimble for 35 Sqmm cable, complete all as specified and directed.

Supply and fixing in replacement Thimble for 50 Sqmm cable , complete all as specified and directed.

Supply and fixing in replacement Thimble for 70 Sqmm cable ,complete all as specified and directed.

Supply and fixing in replacement Thimble for 95 Sqmm cable complete all as specified and directed.

Supply and fixing in replacement Thimble for 120 Sqmm cable ,complete all as specified and directed.

Supply and fixing in replacement Thimble for 150 Sqmm cable, complete all as specified and directed.

Supply and fixing in replacement Thimble 180 Sqmm complete all as specified and directed.

Supply and fixing in replacement Thimble for 240 Sqmm cable ,complete all as specified and directed.

Supply and fixing in replacement of stainess steel fastner suitable for fixing geyser 25/50 ltrs, complete, all as specified and directed.

Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as switches ,ceiling rose, pendent holder, sketcth fitting & regulator etc including making good to the distrurbed surfaces of wall, roof and floor etc to match with the existing surfaces complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS by using FRLS, PVC insulated 1.5 Sqmm multistranded ,1100 volts grade, copper conductor cable, unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet on top for fixing switches sockets etc, all as speified for one light point / fan/ Bell point controlled by one switch complete all as specified and directed.

All as per Srl item No 165 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with other switches with cables 2.5 Sqmm .

All as per Srl item No 165 here-in-before but controlled with one 3 pin socket outlet 5 Amp, independent board with other switches with cables 1.5 Sqmm .

All as per Srl item No 165 here-in-before but controlled with one 3 pin socket outlet 5 Amp, on same board with other switches with cables 1.5 Sqmm .

Taking down shutter n. exe 1.0 Sqm eacg cimplete all as specified and directed

S&F aluminum alloy sliding door bolt 300 mm long with hasp, staple (bolt type and fixture clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed

Note:- The total shall subject to adjustment of credit of Rs 74,509.50 for old Materials as per Schedule of Credit.

M/S Gopal Singh

M/S Gulab Singh