SPECIAL REPAIRS TO CERTAIN CIVILIAN QTRs AND NCs(E) QTRs (PH-II) AT CHAFB UNDER GE (AF) BANGALORE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises Note : All debris and rubbish shall be removed from MoD land during or at the end of each working period at the risk and cost of contractor in accordance with all appliacable federal, state and local regulations

M & L for Non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06sqm but n exc 0.11sqm , in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and laid over 15mm thick screed bed or bedding in CM 1:6 complete all as specified and directed..

Demoltion of Concrete (unreinforced) of any description and in any position not otherwise specifically provided for Note : All debris and rubbish shall be removed from MoD land during or at the end of each working period at his risk and cost in accordance with all appliacable federal, state and local regulations.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over 15mm thick screed bed or bedding in CM 1:6 complete all as specified and directed.

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surfaces as in skirting etc. over 10 mm CM 1:4 rendering and pointed in white or coloured cement to match complete all as specified and directed.

M & L for Coloured Glazed ceramic tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., over 10 mm CM 1:4 rendering and pointed in white or coloured cement to match and complete all as specified and directed. Note : The electrical fitting / fixtures like switch / socket boards, ceiling roses etc.. shall not be disturbed at all while executing the tiles / plaster work in vertical surfaces of walls. The quoted rates are deemed to be inclusive of refixing of any electrical fixtures if damaged and making good the disturbed surrounding surfaces.

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished smooth and even without using extra cement.

M & L for Cement concrete 25mm thick 1:2:4 type B0 using 12.5 mm graded stone aggregate as in sub base for flooring finished even and fair.complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc and removal of debris to outside of MoD land during or at the end of each working period at his risk and cost in accordance with all appliacable federal, state and local regulations.

M & L for pre-cast cement concrete block in PCC 1:3:6 type C1(20mm graded aggregate) masonry with solid blocks, exc. 10cm in width and setting in mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even without using extra cement. Note : The electrical fitting / fixtures like switch / socket boards, ceiling roses etc.. shall not be disturbed at all while executing the tiles / plaster work in vertical surfaces of walls. The quoted rates are deemed to be inclusive of refixing of any electrical fixtures if damaged and making good the disturbed surrounding surfaces.

M & L for rendering 10 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper including white or tinted over a coat of 1 mm thick wall care putty complete all as specified and directed.

M & L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) and stacking at site where directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) and stacking at site where directed.

Taking down steel windows/ventilators ( without taking off shutter from frame) n exc 1.50 sqm each making good disturbed surfaces and removing materials from site of work complete all as directed by Eng-in- Charge

Taking down steel windows/ventilators ( without taking off shutter from frame) exc 1.50 sqm each making good disturbed surfaces and removing materials from site of work complete all as directed by Eng-in- Charge

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each and stacking at site where directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified size of frames 105x60 mm and directed.

S & F 35mm thick Second class hard wood Gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters fitted to chowkats complete all as specified and directed.

S & F steel windows with hung shutter including box type hinges with steel handle steel peg stays, and with glazing bars complete all as specified and directed

S & F steel windows with hung shutter including box type hinges with steel handle steel peg stays, and without glazing bars complete all as specified and directed

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes; frame dguard bars; barred iron doors; ladders; framed balusters; walkways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 framed work as in grill and gratings complete all as specified and directed.

S & F 4 mm thick plain Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane including glazed with putty or fixed with beads complete all as specified and directed.

S & F 4 mm thick frosted Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane including, glazed with putty or fixed with beads complete all as specified and directed.

S & F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with aluminium wire staples complete all as specified and directed.

S & F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.

M & L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

M & L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer , complete all as specified and directed

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through out the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6Nos screws to be provided for each frame all as specified and as directed. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.

S & F factory made solid PVC moulded door shutter, with particle board core 28 to 30 mm thick(stiles ) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, fixed in frame at site complete all as specified and directed.

S & F in repairs 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F in repairs Galvanised mild steel wire cloth, 0.58mm nominal dia of wire and average width of aperture 1.18mm and fixed with aluminium wire staples complete all as specified and directed.

S & F 100mm cold rolled mild steel medium weight butt hinges complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

M & L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) in hold fasts and similar works complete all as specified and directed.

S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles conforming to Fe 410-O 0r Fe 310-O complete all as specified and directed.

S & F in Repairs Vitreous Ware wash down water closet (Pedestal), white (EWC) with 'P' or 'S' trap including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in Repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with 'P' or 'S' trap and integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

S & F in repairs 10 Litres capacity dual type PVC low level SLIMLINE Flushing Cistern with brackets complete all as specified and directed.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 450 x 300 mm size including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

S & F in reparis 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs double legged floor door stopper aluminium alloy with rubber etc complete all as specified and directed

S & F in repairs 15 mm fancy type bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15 mm bore fancy type chromium plated long shank with cup (concealed Type) Stop valves, cast copper alloy screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs 15 mm bore fancy type chromium plated cast copper alloy angle valve screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.

M & L for removing plants/ herbs grown on walls/ junctions with roots using herbicide chemical, rendering and making good of existing brick/ concrete surfaces complete all as specified and directed.

S & F in repairs 600mm x 450 mm PVC moulded frame mirror glass, fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.

S & F in repairs Brass Chromium plated tubular towel rail, 20 mm dia, D Type, 60 cm long between flanges complete all as specified and directed.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, shower arm any size, including fixing to steel pipe or union complete all as specified and directed.

S & F in repairs waste fittings brass chromium plated with PVC outer cover, 40 mm dia for stainless steel sink complete all as specified and directed.

S & F in repairs waste fittings brass chromium plated with PVC outer cover, 32 mm dia for Wash bashin complete all as specified and directed.

S & F in 20 mm curtain rods of aluminium annodised powder coated fixed in existing brackets complete all as specified and directed.

S & F in curtain rods brackets aluminium annodised powder coated fixed in repairs complete all as specified and directed.

M & L for hacking out old broken glass any thickness , size quality or description from wooden / steel frame fixed with wooden beads/ metal pinning and supply & fix of 3mm thick sheet glass in Squares not exc. 0.5 sqm in each pane fixed with wooden beads or putty (in metal frames ) complete all as specified up to 4th storey complete all as specified and directed.

M & L for easing of door / window shutters of any size/ any number of panels for easy closing/ opening / tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding door bolts etc. complete all as specified and directed.

S & F in repairs aluminium handles cast type anodized 125mm complete all as specified and directed.

S & F in repairs aluminium handles cast type anodized 100mm size complete all as specified and directed.

M & L for welding in repairs not exceeding 6mm thick metal complete all as specified and directed.

M&L in repairs 32mm dia. PVC waste pipe for WHB 60cm long with union complete all as specified and directed.

S & F stainless steel plate rack of size 990.60mm x 914.40mm including fixing to wall as directed etc complete all as specified and directed

Supply only mild steel handles , suitable for steel windows fixed with necessary nuts, bolt and washers, all as specified and directed.

S & F in repairs mild steel peg stays, 300mm long , suitable for steel windows fixed with necessary nuts, bolt and washers, all as specified and directed.

S & F in repairs only 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M & L in repairs 19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, incl teak lipping around, fixed with screws to timber frame work complete all as specified and directed.

S & F 125mm aluminium anodised Hasp and staple, safety type fixed with screws complete all as specified and directed.

Taking up or down steel tubing and connections, 15 mm dia including cleaning for refixing or removal to store

Cutting of existing steel tubing for alterations or additions (Each cut measured) and Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form) 15 mm dia in existing position complete all as specified and directed.

Cutting of existing steel tubing for alterations or additions (Each cut measured) and Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form)20 mm dia in existing position complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed for CPVC pipe outer dia 16 mm.

S & F 15mm diaTubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F in repairs 20 mm diaTubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F in repairs Gun-metal, globe or gate valves, 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repairs Ball brass valves,high pressure,with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S & F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed for IPVC tank 500 lit.

S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S & F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S & F in repairs 15mm bore two in one angle cock, chromium plated cast copper alloy screwed both ends complete all as specified and directed.

S & F in repairs Sinks with drainage board made of stainless steel 1 mm thick in kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size, 410mmx330mmx160mm, complete all as specified and directed.

S & F in repairs 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including dismantling of old pipe (sewage/rain water/any type) complete all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work

S & F in repairs 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including dismantling old pipe (sewage/rain water/any type) complete all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work

S & F 75mm dia PVC (SWR) bend with access door of any radius all as specified and directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching ( Ground floor to Seventh Floor).

S & F 110mm bore PVC (SWR) bends of any radius all as specified and directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching

S & F 75mm bore PVC (SWR) bends of any radius all as specified and directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching

S & F 110mm bore PVC (SWR) bends with access door of any radius all as specified and directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching

S & F PVC (SWR) double branch piece (double Y), with access door 110 mm bore. all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching.

S & F PVC (SWR) Branch piece single equal or unequal with access door 110mm bore. all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching.

S & F PVC (SWR) junction single (Single T) equal or unequal with access door 110mm bore.all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching.

S & F PVC (SWR) junction single (Single T) equal or unequal with access door 75mm bore.all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching.

S & F in repairs 75 mm bore PVC(SWR) floor trap, plain with grating including jointing with solvent cement all as specified.Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching.

S & F in repairs for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement all as specified and as directed.

Supply only liquid water proofing compound of approved quality.

M & L for preparing new plastered surface of walls and applying two coats of cement base paint over a coat alkali resistant priming paint of primer through mechanical means including necessary scaffolding up to 3rd storey complete all as specified and as directed

M & L for complete removal of existing treatment on walls and applying 1mm thick wall care putty(birla putty) and preparation of surface making smooth and applying primer as base coat and applying two coat of oil bound distemper through mechanical means including necessary scaffolding up to 3rd storey complete all as specified and as directed

M & L preparation of plastered or un plastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat of white wash including necessary scaffolding upto 3rd storey complete all as specified and as directed.

M & L preparation of plastered or un plastered old decorated surfaces of ceiling by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat of white wash including necessary scaffolding upto 3rd storey complete all as specified and as directed.

M & L preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint including necessary scaffolding up to 3rd storey complete all as specified and as directed.

M & L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint including necessary scaffolding up to 3rd storey complete all as specified and as directed.

Moulya Builders (BID ID -3178909)

OM CONSTRUCTIONS (BID ID -3178726)

K. VENKATESH NAIDU (BID ID -3173414)

VARGHESECHACKO AND CO (BID ID -3172928)