PROVN OF STORAGE SHED AT BSO YARD UNDER GE(E) JABALPUR

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.

M&L moroom/red bajri filling in floors or pavings, laid in layers n exc 15 cm thick spread, levelled and rammed including watering complete all as specified and directed.

M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate as subbase of floor complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded aggregate as in Foundations, including rafts footings, plinth beams; bases for columns, etc complete all as specified and directed.

M&L RCC M-25 design mix using 20mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

M & L RCC M-25 design mix using 20 mm garded aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

Use and waste of formwork to rough finished flat sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beam with required filler etc complete all as specified and directed.

Use and waste of formwork to rough finished flat sides of pillars, posts, struts, piers, columns, and stanchions with required filler etc complete all as specified and directed.

Use and waste of formwork to the sides and soffits of roof Beams complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to Fe-410 -0 or Fe 410-S complete all as specified and directed.

All as item No 11.00 here-in-before but 8 mm and over upto and including 10 mm dia as in stirrups or spacers complete all as specified and directed.

S&F Rolled mild steel Roof trusses (framed), trussed purlins crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. GDE Fe290-0 (Gde-165) complete all as specified and directed.

S&F rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates etc (cut to ordinary lengths i.e within 20mm of the length indicated) GDE Fe 410-O W (Gde E-250) quality 'A' complete all as specified and directed.

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise described over 10cm width or girth including preparation of new surface and applying one coat of red oxide, zinc chrome complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5 cm & n exc 30cm long of 20 mm dia complete all as specified and directed.

S&F Hand rails, half round or their stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete & screwing etc. wind ties for roof including securing bolts ; posts & struts in fencing including cutting tips to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc & similar work conforming to GDE (E-165) Fe 290-0 complete all as specified and directed.

S&F rolled mild steel Plates (plain or chequered) channels. Square cut or notched (ordinary & counter sunk) forming holes, without any attachment gusset plates riveting etc n exc 10 kg each for brackets conforming GDE( E-165) Fe290 complete all as specified and directed.

M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection finished even and fair including expansion joint at every 3m interval and every corner complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and aplying three coats of white wash on wall complete all as specified and directed.

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coats of cement based paint over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces. Complete all as specified and directed.

M&L for 100 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing over 15mm screed bed in CM 1:4 complete all as specified and directed.

M&L for Machine pressed precast cement concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M&L for brick work with old size flyash bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

S&F suspended false ceiling using Chicago metallic E-Grid exposed suspended, grid section size 600 x 600mm comprising of GI powder coated main runners of dimension of 39 x 24 x 360 x 0.88 mm thick (thickness comprising 0.40 mm + PPP GSO 30 MM and weight of runners 1.35 kg for 3600 mm length. Gross T of dimension of 29 x 24 x 600 x 0.80 mm thick. The thickness of comprising GI 0.040 mm + PPPC GS (0.30 mm and weight of T 0.195 kg for 6000 mm length) and wall angle of dimension 22.2 x 22.20 x 3050 x 0.65 thick (the thickness comprising of GI 0.35mm + PPGC GS 0.30 and weight of angle 0.70 kg for 3050 mm length) with and including 4 mm thick HPSC (Tugs pressure steam cured) Preprimed, self embossed texture dingier bound water termite and resistant for including and acoustic purpose the to be placed in the grid system duly suspended with 4mm dia GI wire hangers fixed with steel dash trough fasteners from purline of the roof with butterfly clips (wt 0.007 kg per clip) hold down clip wt 0.0035 kg per clip) with provision of complete all as specified. Note:-PPPCGS Densts Prep anted Polysters Coated Galvanised steel.

S&F 1.6 mm thick Mild steel, plain, black sheet as in roof coverings ,wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and directed.

S&F Steel windows or ventilators, fixed type, with glazing bars. Complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality, sheet glass is ground or obscured or frosted on one side and glazing with oil putty in square not exc 0.5 sqm in each pane. Complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit of white/ivory colour including all accessories after chasing in wall/ceilling etc, heavy duty ISI marked with GI sunken boxes 1.2mm thick, 60mm deep with earth dolly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a) One light/fan point controlled by one, one way switch 5 Amps.

(b) One socket out let 6 A on same board complete

All as per item No.38.00 here in above but with 1100 Volts grade copper stranded conductor FRLS cable of size 2.5 Sqmm main & with 2.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 5/15 Amp on Independent board complete all as specified & directed by Engineer-in-Charge.

Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, all as specified and as directed. NOTE : Two runs of 1.5 sqmm conductor for main and one run of 1.5 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables with MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

S&F for modular Switch , single pole, one way and 5/6 Amp, single modular complete all as specified and directed.

S&F modular switch 16 Amps one module 230 volts AC as per existing model/make complete all as specified and as directed

S&F for modular Socket outlet 6 A 2/3 pin Amp, single modular complete all as specified and directed.

S&F modular socket, 6/16A -2/3 pin combined 2 module, 230 volts AC as per existing model/make complete all as specified and as directed .

Supply and Fixing MCCB, four pole, 100 Amp, 415 Volt, of breaking capacity 16 KA complete all as directed.

S&F ceiling rose surface type PVC/Polycarbonate isolated body, 65x 20mm, 3 terminals, complete all as specified & directed.

S & F new 1 X 20W, 4 feet, LED light fittings wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electric driver including 1 x 20 Watt LED Tube light etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size compete all as specified and directed.

S&F LED light fitting square 2'x2' 35/36 watt, 3000 lumen, Cool white / Warm white , all as per direction, warm white along with fixture Surface / Recessed /Pendent mounting LED luminaries with diffuser channel Luminaires, connector block, etc complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge.

Supply and fixing LED security light fitting 35 watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket made of 40 mm dia GI tubing medium grade of suitable size including fixing clamps & light fitting etc complete all as specified and directed.

Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete all as specified and as directed. NOTE : Two runs of 2.5 sqmm conductor for main and one run of 2.5 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables with MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

S & F sheet metal enclosure MCCB DB TPN 4 Way vertical type 250 A Copper Busbar for each phase Fully insulated busbar & shouldered Neutral bars with provision for DPX³ 160 MCCB as incomer and SP/TP MCB's as outgoing Reversible Door for IP 43 IK-09 DB's system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S & F MCB single Pole rated capacity 5 to 32 Amps, 240 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

M&L unwashed Sand cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified. Note : Measurement shall be done after puning down of sand.

Supply and laying un-reinforced precast concrete cable cover, Class LV, Type I,flat, size 250 mm x 150 mm x 40mm complete all as specified and as directed.

S & F 40 mm dia GI Pipe light grade for cable protection passing under road/floor or for fixing to poles complete all as specified and directed.

Supply, Laying & testing and commissioning LT underground cable 1100 volts grade, 35 Sqmm 3.5 Core LT XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of size complete all as specified and directed.

M&L earthing complete with galvanised steel earth plate electrode 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of earth plate not less than 1.5 m below normal ground level connected to galvanised earth wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron, all as shown in electrical plate No 3, connected to earthing test point including excavation/earth work in any type of soil, PCC 1:3:6 type C-2 in pit and CI pit cover including funnel covered with wire mess and handle duly reinforced with 6 mm round bars both ways @ 125 mm c/c, GI protection pipe 15mm bore light grade and watering pipe 20mm bore medium grade complete all as specified and directed.

Schedule of credit amount of Rs. 00.00 to be deducted during AOC.