Recall Shifting of Milk Dairies in MC Hisar

Push Hends or Arm Wheel :- Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc

Pull and Power Push Chair:- Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc..

Triple Twister :- Providing, designing and fixing Twister of size 1700 X 1300 X 1300 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc..

Dual Sky Stepper or Double Cross Walker :- Providing, designing and fixing Double Cross Walker of size 1600 X 600 X 1600 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc...

Providing and fixing of a Garden Hut- Octagonal One Side Length 9` Outer Side Hight 8` Center Hight 11` Complete with Bench.....

Chain Swing Jhulla- (Two sheater) (10’ height) x (8’ width) with Bearing along with 2” dia M.S. pipe length and top 48’ 1.25” pipe and support 7’ with Chain and hook etc. along with Bearing and bracket Top box of M.S. sheet and 4 Nos M.S. sheet of Patti seat for children with coat paint of Berger paint (painting charges) Bottom hole fast 4 Nos. 1” round axle for bearing 2 Nos......

Multiplay Station jhula with size 27*15*13ft with 1 Nos climber/Height Gainer, 2 Nos Canopy of 4mm thick, 6.5 ft long Spiral Slider of 6mm thick, 10 ft long Wave Slider of 6mm thick, Tunnel 5 ft long of 4mm thick Etc. with 3” sq. pipe, 1.6” sq. pipe, 3”*1” sq. pipe, 8mm chain with two Nos Chain Swing Sheat Jhula with 2 Nos. Sq. Doom..........

Supply and erection of Railing Ornament ( Bhala Design)

Supply and laying of HDPE liner on bed

Providing and Fixing HDPE Geo Cells on side slopes (75 mm 0.712 mm )

Supply and erection of LED Flood light 240 watt of Makes Bajaj (Model No.BJFL 240W LED ) High Wattage Floodlight 3rd generation LED luminaire with ultra sleek, light weight and with secondary optics, made of pressure die cast housings with IP 66 rating with all allied accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work ( Phillps and Crompton, Surya ).

Supply and erection of 2.5 Sqmm, 3 core PVC insulated copper cable

32 Amp. 3 Pole/230V Astronomical automatic time switch

Supply and Erection of Rubber mat of size 2mX1m

Supply and eraction fo fire extingusher ISI marked Co2 type 4.5 Kg. Capacity

Supply, Erection, Testing, commissioning of 11 Kv outdoor type HT Metering Panel complete with CT `s,PT cubical and Electronic meter with accuracy class0.5 as per required/approved by UHBVN required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of work.

Supply of 1000KVA, Outdoor type, oil cooled Transformer

Supply of 800KVA, Outdoor type, oil cooled Transformer

S/E OF 11kv gang operated switch Jai Shree make conforming to IS with latest amendment including suitable size of copper blade erection of same on existing `h` pole woth the help of 3 no channel of size 75mm x 40mm x 6mm, 1.8 long fixed with suitable size MS clamp, nuts and bolt including cost of 6 no 11 KV insulator with GI pin, RD fuses and painting with 2 coat of approved paint and one coat of red oxide material required to completer the job in all respect upto the entire satisfaction of Engineer-in Charge of work

Supply and erraction of 630V, 11 KV indoor VCB, copper Bus Bar, 12 KV, Motorise charging, O/c/E/f relay

Supply and erection of prestressed CC pole as per IS: 1678-196011 metres long 152 mm x 203 mm at top and 152 mm x 368 mm at bottom with working load of 360 Kg. buried 2.20 m in ground.

APFC Panel- Incomer 1 no MCCB TP Pole 800A Ics= 50kA Thermal magnetic with Double break roto mechanism. Intelligent APFC Relay with 350 kVAr MPP Heavy duty Capacitor with suitable rating of contactors and Short ckt protection device for each banking. Banking of Capacitor should be 12.5 X2 no, 25 X 1no, 50 X 2no. 100X 2 no.complete in all respect upto the entire satisfaction fo Engineer- in Charge of work. Make -Havells , CG , Crompton, Voltamp, ABB, Siemens, Schneider.

Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per,metre) pole top bracket/ cross arm for single 11 KV over head, line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.

Erection of Pole top/ straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/33 KV as required

Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.

Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required.

Designing, providing, fixing, commissioning and testing of gas chlorinator make Regal USA/ ECO CHLOR of CIT(USA) having capacity upto 2000 grams/ hrs. as designed having the control of gas upto 20th part of max. dose and which can start working automatically on switching on the supply of water complete in all respect with including one year defect liability period and trail run of 3 months. The complete system consists of (a) Vacuum regulator (b) Measuring Glass Tube (c) Ejector (d) PF tubing (e) Spanr.er with cylinder opening key (f) Ammonia Gas (Liquid) for leaking test) (g)1` dia. PVC pipe with PVC fitting, ball Valves, etc. h) 2 No. chlorine gas cylinder capacity 100kg duly certified and approved by BIS and Explosive Department Govt. of India. (1) Electronic Chlorine gas leak detector with sensor and hooter. (j) Eye Googles (k) mask with canister

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Shifting of Milk Dairies in MC Hisar