Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹22.8 L+₹60,265 (2.71%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹27.4 L+₹5.2 L (23.3%)Rejected-AOC 606 80 FEET ROAD 7TH BLOCK 2ND PHASE BANASHANKARI 3RD STAGE BANGALORE 560 085 | BENGALURU URBAN | KARNATAKA | 560085 | L3 | Rejected-AOC L3 | |
| 4 | L4₹28.2 L+₹6.0 L (27.0%)Rejected-AOC | L4 | Rejected-AOC L4 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
28 Mar 2020, 6:00 pmClosed
GE (AF) Yelahanka
GE (AF) Yelahanka Bangalore - 63
REPAIR /REPLACEMENT OF EXTERNAL LIGHT FITTINGS,CERTAIN REPAIRS TO FIRE ALARM SYSTEM AND MISCELLANEOUS WORKS AT AFS YELAHANKA
2020_MES_331247_1
8769/E8
Open Tender
Civil Works
Item Rate
180 days
AFS Yelahanka
As per NIT
9 documents required · 9 mandatory
₹500
GE (AF) Yelahanka
₹60,000
Yes
22 Jun 2020
4 Mar 2020
30 Mar 2020
4 Mar 2020
28 Mar 2020
16 Mar 2020
Amount
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes, foundation for poles etc., and getting out in hard/dense soil all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in not exceeding 25 cm thick complete all as specified and directed.
Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as directed.
Supplying and laying un-reinforced precast concrete cable cover, class LV, Type 1 with peak, size 250 mm x 150mm x 40mm all as specified and as directed
Supply, lay, spread in trenches river sand including spreading, levelling, punning for cushioning of cable all as specified and as directed.
Supply and laying in trenches, LT underground cable of size 4 core 6 Sqmm XLPE insulated armoured and PVC sheathed 1100 Volts grade with aluminium conductor multistranded including cable connecting lugs, glands,jointing materials etc., laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole, wall complete all as directed by Eng-in-cahrge.
Supply and laying in trenches, LT underground cable of size 4 core 10 Sqmm XLPE insulated armoured and PVC sheathed 1100 Volts grade with aluminium conductor multistranded including cable connecting lugs, glands,jointing materials etc., laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole, wall complete all as directed by Eng-in-cahrge.
Supply and laying in trenches, LT underground cable of size 4 core 25 Sqmm XLPE insulated armoured and PVC sheathed 1100 Volts grade with aluminium conductor multistranded including cable connecting lugs, glands,jointing materials etc., laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole, wall complete all as directed by Eng-in-cahrge.
Supply and laying in trenches, LT underground cable of size 3.5 coreX 95 Sqmm XLPE insulated armoured and PVC sheathed 1100 Volts grade with aluminium conductor multistranded including cable connecting lugs, glands,jointing materials etc., laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole, wall complete all as directed by Eng-in-cahrge. Note:- (2) For Sl No 6 to 9 ,necessary excavation and connected items shall be measured and paid under respective items of the same schedule separately
Supply and fix bus bar box of size 0.45x0.3x.50 mtrs fabricated by 3 mm thick MS sheet outdoor type,mounted/fixed on angle Iron frame of MS equal angle size 40x40x6mm of height 0.90 mtr and fixed in ground complete box with dust/vermin proof including aluminium flat of size 50x 6 mm fixed as bus bar over the insulators,sleeved for three phase and neutral and spray painting the box with two coats of enamel paint over a coat of metal primer complete all as specified and directed by Engr-in-charge including necessary excavation,PCC for fixing the box all as directed.
Supply anf fix MCB SP 6-32Amps,230 volts,50 HZ,AC, all as specified and as directed
Supply and fix MCB SPN 6-32 Amps,230Volts,AC,50 HZ, all as specified and as directed.
Supply and fix MCB TPN 40 Amps,415 Volts,50 Hz,AC all as specified and as directed
Supply and fix MCB TPN 63 Amps,415Volts,50 Hz,AC all as specified and as directed.
Supply and fix MCCB 4 pole 63 Amps,415Volts,50 Hz,AC with adjustable microprocessor released of breaking capacity 35 KA all as specified and as directed.
Supply and fix MCCB 4 pole 100 Amps,415Volts,50 Hz,AC with adjustable microprocessor released of breaking capacity 35 KA all as specified and as directed.
M & L for Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 of 9 mtr long including two coats of painting over a coat of red oxide primer all as specified and as directed.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate in foundation complete all as specified and as directed.
M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate for stay and couping for poles including necessary form work to exposed surface finished smooth and even complete all as specified and as directed.
M & L for Preparing old faded painted surfaces of 9 m long steel tubular/RCC/PCC/Rail pole complete including all accessories such as cross arms bracings, brackets etc and paints with two coats of Aluminium paint of approved colour including writing pole number with paint same as existing earlier complete all as specified and as directed.
M & L for Preparing of old faded paint surface and painting with paint to existing LT PCC/RCC/steel tubular poles of size 9m/11 mtr long upto the height of 1.2m from the bottom with approved white and blue colour alternatively including numbering of poles same as existing earlier complete all as specified and as directed.
Supply and fix 45 Watts, 230 Volts, LED fitting for street light with pressure die cast aluminium housing wirh control driver with suitable efficiency with heat resistance glass and IP-66 protection with better optics for uniform distruibution,including necessary fixing arrangement of nuts,bolts,brackets and clamps including dismantling of old unsrviceavle fittings all as specified and directed. Make: WIPRO CAT NO:LR02-501-XXX-57-XX or equivalent make of Havelle/Phillips/Crompton Greaves
Supply and fix 60 Watts, 230 Volts, LED fitting for street light with pressure die cast aluminium housing wirh control driver with suitable efficiency with heat resistance glass and IP-66 protection with better optics for uniform distruibution,including necessary fixing arrangement of nuts,bolts and clamps including dismantling of old unsrviceavle fittings all as specified and directed. Make: WIPRO CAT NO:LR02-671-XXX-57-XX or equivalent make of Havelle/Phillips/Crompton Greaves
Supply and fix 90 Watts, 230 Volts, LED fitting for street light with pressure die cast aluminium housing wirh control driver with suitable efficiency with heat resistance glass and IP-66 protection with better optics for uniform distruibution,including necessary fixing arrangement of nuts,bolts and clamps including dismantling of old unsrviceavle fittings all as specified and directed. Make: WIPRO CAT NO:LR02-102-XXX-57-XX or equivalent make of Havelle/Phillips/Crompton Greaves
Supply and fix 150W LED flood light fitting, power range of 90Watts ,LED type high grade aluminium pressure die cast with IP-66 protection efficient high output emmited LED for better distribution ,heat resistance tempered glass for protction with 5 KV with high spread clear cover using high quality lenses and reflector with controldrive with efficiency 90%, over voltage protection upto 300 Volt including testing commssioning and fixing arrangements for nuts,bolts and clamps etc.complete all as specified and directed by Engr-in-charge. Make: WIPRO CAT NO:LR02-671-XXX-57-XX or equivalent make of Havelle/Phillips/CG
Supply and fix 200W LED flood light fitting, power range of 90Watts ,LED type high grade aluminium pressure die cast with IP-66 protection efficient high output emmited LED for better distribution ,heat resistance tempered glass for protction with 5 KV with high spread clear cover using high quality lenses and reflector with controldrive with efficiency 90%, over voltage protection upto 300 Volt including testing commssioning and fixing arrangements for nuts,bolts and clamps etc.complete all as specified and directed by Engr-in-charge. Make: WIPRO CAT NO:LF20-272-060-57-XX or equivalent make of Havelle/Phillips/CG
S&F on load change over siwtch 4 Pole 200 A 415V, 3 Phase, with suitable enclosure all as specified and as directed.
S&F on load change over siwtch 4 Pole 315A 415V, 3 Phase, with suitable enclosure all as specified and as directed.
M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground earth pit not less than 2.25 M deep below ground level with top edge of the plate not less than 1.5 M below normal ground level connected to galvanised strip of 32x6 mm by means of nuts, bolts, checknuts, washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I of 2009 connected to and including earthing test point or disconnecting / testing link including excavation/ earth work in any strata, removal of surplus earth, GI pipe for watering and funnel, GI Pipe medium grade 40mm dia for earth lead protection, PCC 1:3:6 type C1 chamber with chamber cover in RCC 1:2:4 type B1 all as specified and directed by Eng-in-charge.
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6 mm strip galvanised iron complete all as specified and directed.
Dismantling taking out air circuit breaker 800 amps capacity 3 pole 415 volts 50 Hz and removing mechanical assembly fixed and moving contact set and replacing mechanical parts like spring, bushes, levers and checking for worn out contacts, overvoltage and under voltage settings and replacing the following electrical parts (i) fixed contact assembly (ii) moving contact assembly, (iii) pole assembly (iv) Arc chute . Reassembling, testing and commissioning completely all as directed by Engineer in charge.Note Rate quoted shall be deemed to include the charges for fixing the unserviceable electrical parts which will be measured and paid seperately vide item nos 32,33 & 34 below.
Supply only fixed contact assembly for 800 Amps 3 pole 415 volts ACB all as specified and as directed by Engineer in charge
Supply only moving contact assembly for 800 amps 3 pole 415 volts ACB all as specified and as directed by Engineer in charge.
Supply only pole assembly for 800 Amps 3 pole 415 volts ACB all as specified and as directed by Engineer -in- charge.
Supply and fix Fountain LED Light With Stand (Jumbo) ,100% water proof ,resin filled, Multi Color Auto Color Change 12Volt X 30Watt(+3%) of type SS 304 including making necessary fixing arrangements with nuts,bolts and clamps, if necessary complete all as specified and directed. Make- BAJAJ/Havells/Phiips or any other make approved by GE.
Supply and fix driver suitable for existing LED fountain as directed by Engr-in-charge. Note: The contractor has to get prior approval from the Engr-in-charge.
S&F in replacement of 40 mm dia light grade GI pipe bracket 1.5 mtr long bend to shape including clamps made out of 50 x 6 mm flat iron duly painted with two coats of aluminium paint over a coat of red oxide primer, suitable size nuts, bolts and washers all as directed by Eng-in-charge.
S&F pole mounted junction box (Street light box) sliding type doors fits to base by means of MCB 16 Amps and busbar insulator - 04 Nos with nuts and bolts with fixing arrangment outdoor type of dismension 250 x 170 x 130 mm product code no GS-JB-2817 with suitable screen printed skull and bones for danger notice on middle and top cover of the box. Make - sintex or equivalent make as approved by GE.
Supply and fixing LED Decorative Post top fitting 40 Watt for 360 degree indirect light with IP 65 protection. It should be resistant to impact and corrosion, glare free and better uniformity compelete with all fixing accessories all as specified and as directed. Make:CG Cat part NO:LPTO-40-CDL or equivalent make of Phillips/Havells/Wipro
Supply and fixing IP 65 rated Inverted Pyramid Tripod type LED Bollard 10 Watt light fitting with soft 360 degree light distribution including all fixing accessories and necessary foundation all as specified and as directed. Make:Crompton Cat Part No. LBLSN-10-CDL or equivalent make of Phillips/Wipro/Havells
Supply , installation, testing and commissioning of Intelligent Addressable microprocessor based 2 loop fire alarm control panel, each loop capable of handling 99 detectors and 99 devices per loop on a 75% maximum loading with suitable battery backup for 72 hours in normal condition and 3 hours during alarm condition and shall be expandable capacity.The panel shall have necessary serial port for programming from PC . The Panel shall display events such as FIRE, FAULT, DISPLACEMENT, TEST, BUZZER , MUTE, DELAYED, and POWER status for independant prgrammable with LED indications. The system shall also have the provision to have an auto dialler attached to this panel which shall be having speech processor for sending out recorded information. The panel shall be provided with dedicated earthing which has to be connected to the existing earthing line of the building. The panel shall also be provided with seperate battery stand and the same shall be mounted next to the panel. The tenderer shall need to provide the battery calculations. The user shall providing a line for the same. The panel shall have built in features like display of events with 6x40 character, Blue / Green LCD display with back light illumination, control keys for evacuation, silence / resound, Mute buzzer, Time delay extension, silent Reset & adequate number of Zones for showing Alarm condition. The panel shall be suitable for Two programmable on Alpha - Numeric Key pads for cancellation and Return Navigation Keys and an OK Key. The programming Keys shall have 12 Bifunctionary Keys. The Panel shall operate under ambient conditions like 0 degree centigrade to 40 degree centrigrade., Relative humidity of 5% to 95% non condensing and IP 30 enclosure or higher. The Tenderrer shall not consider any variations in the loop to meet up the requirements. Make: Morley IAS- Honeywell / Seimens / Notifier/Bajaj Securiton, UL / FM/ CE/ LPCB certified all as specified and directed.
Supply, installation , testing and commissioning of Micro processor based loop driven Intelligent addressable sounders cum strobe inbuilt. The addressable sounder cum strobe shall form part of loop device such that, no additional separate wiring is required. The sounder shall have audible range of 75 dB when heard at a distance of 1 Mtr. The sounder shall be suitable for wall / ceiling mounting shall operate on 24 Volt DC each sounder shall meet the specifications all as specified and as directed. Make:Morley IAS- Honeywell / Seimens / Notifier/Bajaj Securiton, UL / FM/ CE/ LPCB certified all as specified and directed.
Supply and fix adressable manual call point with built in adressable monitor module, restorable type which is suitable for external mounting on polycarbonate box or concealed in metallic box with suitable covering plate . The manual call point will be of 'Pull down' type all as specified and as directed. Make:Morley IAS- Honeywell / Seimens / Notifier/Bajaj Securiton, UL / FM/ CE/ LPCB certified all as specified and directed.
Supply, installation , testing and commissioning of Intelligent addrressable Short Circuit Isolator ( Fault Isolation Module) shall be suitable for DIN rail mounting and mounted external device shall display status of Tri colour with Open, short circuit LED status indication for normal, The Device shall be suitable for Loop connectivity. (The FIM shall be cosidered for every 20/22 devices as the site condition) Make:Morley IAS- Honeywell / Seimens / Notifier/Bajaj Securiton, UL / FM/ CE/ LPCB certified all as specified and directed.
Supply, installation , testing and commissioning of Response Indicator for multisensor type heat and smoke detetor with LED indication enclosed in sturdy box and inscribed as "FIRE". Make:Morley IAS- Honeywell / Seimens / Notifier/Bajaj Securiton, UL / FM/ CE/ LPCB certified all as specified and directed.
Supply, installation, testing and commissioning of Microprocessor based Intelligent Addressable multisensor type Heat & Smoke detectors (Combination of Photio electric & thermal sensor) with bases.including fixed on metal junction of size 75x75x50 mm with metal glands and gasket. The detector shall sense fire / smoke and generate alarm if any Fire / smoke occurred in the building. The detectors shall have Two built in LEDs for 360 degree viewing all as specified and as directed. Make:Morley IAS- Honeywell / Seimens / Notifier/Bajaj Securiton, UL / FM/ CE/ LPCB certified all as specified and directed.
Boring of holes under road, pavement, hardstandinig by trenchless technology using ultrasound technique and necessary maching including HDPE pipe of 110mm dia suitable for 0.4 mpa working pressure.
M & L for Wiring 2 Core X 2.5 sq mm FRLS Unarmoured Cable for connection street light from junction box to fitting Including 20mm dia PVC conduit with all fixing accessories as specified and as directed.
Maintenance for Solar control system with inserting a new postpaid sim cards(21 Nos) in the favour of GE(AF) Yelahanka and recharging of the same for the period of 6 Months as received by Airtel office complete all as specified.
Supply & fix gong bell single phase 220 V ,AC cast iron body and weather proof provided with chromium mild steel pressed gong, 12". Make- Edioson or any other make as approved by GE.
Thirumala Construction
Lucky Enterprises
SREE VARU ELECTRICALS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .