PROVN OF SPLIT TYPE AIR CONDITIONING IN COMP LAB AND EXAMINATION HALL IN NEW SOMA BUILDING AT INHS ASVINI, MUMBAI

Amount

Supply, fixing, installation and testing 5 star and EER 3.2 inverter based air cooled split type air conditioner, electric driven, single phase with capacity not less than 2.0 Ton ( Non CFC gas ) , 230 volts, 50 Hz with cordless remote control unit and in built air ioniser and plasma filter for better indoor air quality complete with all accessories including suitable size powder coated stand for both units, fixing arrangement as per manufacturers instructions, and testing for performance including making hole in wall to pass pipe, provn of copper tubing for suction line and for RM liquid discharge line duly insulated as per manufacturers instructions as per site requirement and making good disturbed surfaces as per existing complete all as directed by Engineer-in-Charge. Make : Carrier, Diakin, Voltas, Hitachi

Supply and lay of PVC flexible pipe 5/8" dia, heavy duty for drain out condensing water of split type AC ancluding cutting of floor, making hole in wall and making good the surface after laying pipe to match with existing surface cmmplete all as specified.

S&F single pole & neutral enclosure with a two pin and earth plug and socket 5 pin 15 Amps complete working on 240 volts, 50Hz, AC supply including one SPN MCB 20 Amps. Make - L & T , Legrand, Siemens

Supply, fixing, stringing and drawing submain wiring with 2 run of single core 6 Sqmm PVC insulated and unsheathed, multi stranded FRLSH copper conductor cable using colour code for phase red and neutral black with and including 6 Sqmm PVC insulated and unsheathed multistranded FRLSH copper conductor cable in green colour connected to common earth point and connected to earth dolly drawn through and including 20 mm PVC casing caping, heavy grade (ISI marked) with and including all accessories etc compete all as specified and directed . NOTE:- (i) Two run of 6 sqmm, one run of 6 Sqmm earth continuity conductor and 20 mm PVC casing caping and accessories shall be measured and paid as one length.

M and L for point wiring with proper colour coding using PVC insulated, unsheated, multi stranded, HRFR copper cable 4 Sqmm size, 1100 volts, ISI marked, including PVC insulated 4 Sqmm earth continuity conductor multi stranded drawn through and including 25 mm PVC conduit with all accessories such as bend, tees,elbow, for one industrial metal clad power socket on independent board from nearest DB all as specified and directed by the Engineer-in-Charge.

M&L for cutting chases in brick walls pining in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of wall for concealed PVC conduit wiring and making good disturbed surfaces, cutting n.exc 10 cm girth complete all as specified.

GLOBAL AIR TECNIX

somnath engineering corporation

Ganga Enterprises

GANGAJAL

Veer High Tech Solution

A P ENTERPRISES

Vandan Enterprises