REPAIR RENEWAL MAINT OF INTERNAL ELECTRIC WIRING AND CERTAIN CONNECTED WORKS INCLUDING OT LIGHTS AT PHASE I AND II AND OTM AREA OF MH KIRKEE UNDER GE MH AND RH KIRKEE

Amount

Taking down carefully copper/aluminium wiring (Light, fan, socket or power complete (fitting such as switches, ceiling rose, pendant, regulators, sockets) removing taking down material to stores and making good the disturbed surface of walls, floors, ceiling etc.

M & L for point wiring complete with and including 1.5 sqmm (nominal area) single core multi stranded copper conductor PVC insulated but unsheated FRLS cable 1100 Volts drawn in to and including ISI marked of suitable size its accessories such as tee, bend ,elbow, socket and and also including 1.5 sqmm PVC insulated and PVC unsheathed single core multistranded copper conductor FRLS cable 1100 V grade as earth wire including concealed MS terminal box ISI marked of suitable size / 3 mm thick hylam sheet on MS terminal box for housing switch ,socket,regulators etc complete for One light point controlled by one switch

All as per item No 2 above but for One Fan point controlled by one switch

All as per item No 2 above but for One 5 pin 6 Amps socket outlet on independent board.

All as per item No 2 above but for One 5 pin 6 Amps socket outlet on same board.

All as per item No 2 above but for bell /buzzer point controlled by one push button on the same board with other switches or indipendent with cables 1.5 sqmm size.

All as per item No 2 above but for one light point controlled by two way switch.

All as per item No 02 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 v grade PVC insulated but unsheheted copper conductorFRLS cable 1100 volts grade and 2.5 sqmm PVC insulated but unsheathed FRLS cable as earthwire for 16 Amps power point on independent board complete all as specified and directed by Engr-in-charge.

S & F switch piano type inreplacement/ repair pole one way 6 Amp all as specified and directed by Engr-in-Charge.

S & F switch piano type inreplacement/ repair 16 Amps all as specified and directed by Engr-in-Charge.

S&F Bell push, flush type, inreplacement/ repair 6 Amp all as specified and directed by Engr-in-Charge.

S & F switch piano type two way 6 Amps inreplacement/ repair all as specified and directed by Engr-in-Charge.

S&F Bell push, Modular type, inreplacement/ repair 6 Amp all as specified and directed by Engr-in-Charge.

S & F socket outlet 2 in1,3 pin 5 Amps inreplacement/ repair all as specified and directed by Engr-in-Charge.

S & F socket outlet 2 in 1, 3 pin, 6 and 16 Amps flush type inreplacement/ repair all as specified and directed by Engr-in-Charge.

S & F switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type inreplacement/ repair all as specified and directed by Engr-in-Charge.

S & F switch socket combination 2 in 1, 3 pin, 5 Amps flush type inreplacement/ repair all as specified and directed by Engr-in-Charge.

S & F switch socket combination 2 in 1, 3 pin, 5 Amps flush type with fuse & neon lamp indicator inreplacement/ repair all as specified and directed by Engr-in-Charge.

S & F switch socket combination 2 in 1, 3 pin, 5 and 15 Amps Box type inreplacement/ repair all as specified and directed by Engr-in-Charge.

S & F switch socket combination 2 in 1, 3 pin, 5 Amps Box type all as specified and directed by Engr-in-Charge all as specified and directed by Engr-in-Charge.

S&F in repair/inreplacement socket out let 2-in-1,3 pin 6 /16Amps Modular Flush type, (as per existing) all as directed by engr- in- charge.

S&F in repair/inreplacement Switch 16 Amps Modular Flush type, (as per existing) all as directed by engr- in- charge.

S&F in repair/inreplacement Switch 6 Amps Modular Flush type, (as per existing) all as directed by engr- in- charge.

S & F PVC ceiling rose surface type three terminals type inreplacement/ repair all as specified and directed by Engr-in-Charge.

S & F Buzzer / call bell/ ding dong AC 230 volts, 6 Amp single Phase in white /Ivory colour finish inreplacement/ repair all as specified and directed

S & F surface and wall mounted T-8 LED MS Batten energy efficient Ultra bright, glass shell, glare free, wide angle, single side connection retofit LED tube with G13 lamp holders for 20/22 W LED (four feet) decorative complete in all respect including taking down old conventional type tube light fitting all as specified and directed by Engineer-in-Charge. Make : Havells cat part no. (LHFXCENNTN1W020) or equivalent in Bajaj/ Wipro/ Philips

S & F tube rod of 20 W LED with single side connection for surface and wall mounted T-8 LED batten 20/ 22 W LED (four feet) 6500 K decorative complete in all respect including taking down old tube rod removal all as specified and directed by Engineer-in-Charge Make : Havells cat part no. (REGALBATTENT8UPTO1X22WSSBSWH) or equivalent in Bajaj/ Wipro/ Philips

S&F surface and wall mounted LED T5 integrated Batten with integrated electronic driver energy efficient 20W LED (Four feet) decorative complete in all respect including taking down old conventional type tube light fitting all as specified and directed by Engineer-in-Charge. Make : Havells cat part no. LHEXBLP7PN1W022 or equivalent in C & S/ Wipro/ Philips

S&F surface and wall mounted LED T5 integrated Batten with integrated electronic driver energy efficient 10W LED (Two feet) 6500 K Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete in all respect including taking down old conventional type tube light fitting all as specified and directed by Engineer-in-Charge. Make : Havells cat part no. LHEXACP7IN1W010 or equivalent in C & S/ Wipro/ Philips

S&F surface and wall mounted pride plus inverter LED T5 integrated Batten with integrated electronic driver energy efficient 10W LED (Two feet) 6500 K Inverter LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8-10 hours and back up time upto 4 hours complete in all respect including taking down old conventional type tube light fitting all as specified and directed by Engineer-in-Charge. Make : Havells cat part no. LHEXACP7FN1W010 or equivalent in C & S/ Wipro/ Philips

S&F Recess mounting LED ultra mordern design Light fitting 36 watt ,600 mm x 600mm size with efficient LEDs all as specified and directed .Make : C&S Cat part no. LTCRP36WLED2X2 or equivalent in Havells/ Philips

S&F Unique slimmest recess com surface panel, solution to provide variable cutout size for installation in recess / surface mounted square LED panel Aluminium die cast body with premium diffuser 18 W 6500K LED lighting fittig all as specified and directed. Make : Havells cat part no. LHEAABP7IN1W018 or equivalent in Wipro/ Philips

S&F Unique slimmest recess com surface panel, solution to provide variable cutout size for installation in recess / surface mounted square LED panel Aluminium die cast body with premium diffuser 12 W 6500K LED lighting fittig all as specified and directed. Make : Havells cat part no. LHEAABP7IN1W012 or equivalent in Wipro/ Philips

Supply and fix self ballasted decorative LED lamps 5.00 Watt with unbreakable PC body Polycab all as specified and directed Make: Havells cat pat No LHLDEUEEMC8R005 or equivalent in Wipro / Bajaj / HPL

Supply and fix in repair high quality LED base 18 watt, Retrofit 4 pin PL Lamp with direct plug and play Make : Crompton / Wipro / Havells/HPL/Syska

Supply and fix in repair of LED Driver suitable for recess mounting LED Light fitting 32W to 42W watt of (any Make) 600 mm x 600mm size. Make : Crompton / bajaj/ Havells/HPL/Syska

Supply and fix in repair of Driver for 9 to 12 W 6500K LED lighting fitting with universal connector for easy installations cat Part No.- Havells. LSSLNW0169

Supply and fix in repair of Driver for 15 to 18 W 6500K LED lighting fitting with universal connector for easy installations cat Part No.- Havells. LSSLNW0170

Supply & fix PIR Motion sensor of detection range 360 , detectction distance more than 6 mtr,installation height 2.5 to 4 m and detection movement speed .06-1.5 m/s including necessary wiring with 2.5 sqmm three core multi stranded copper condcutor 1100 v grade from light/ main board to sensor all as specified and directedMake Crabtree: Product code ACSBA005 equivalent Havells

Supply & fix PIR surface mounted Motion sensor of detection range 360 , detectction distance more than 20 mtr,installation height 2.5 to 6 m and detection movement speed .06-1.5 m/s including wiring with 2.5 sqmm three core multi stranded copper condcutor 1100 v grade from light/ main board to sensor all as specified and directed.Make Crabtree: Product code ACSBA003 equivalent Havells

S & F sheet metal enclosures for double door distribution board factory made duly painted 4 way SPN and neutral 240 v with 200 amps rated bus bar , suitable for fixing MCB /Isolators all as specified ( Make Cat No. DSDMTNVODI 08 of Standard or its equivalent in Havells /Indoasian )

S & F sheet metal enclosures for double door distribution board factory made duly painted 8 way SPN and neutral 240 v with 200 amps rated bus bar , suitable for fixing MCB /Isolators all as specified ( Make Cat No. DSDMTNVODI 08 of Standard or its equivalent in Havells /L&T )

M&L for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 1.5 sqmm 1100 volt grade drawn into PVC casing capping of suitable size including 1.5 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size all as directed by Engr-in-Charge..

M&L for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 2.5 sqmm 1100 volt grade drawn into PVC casing capping of suitable size including 2.5 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size all as directed by Engr-in-Charge..

M&L for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into PVC casing capping of suitable size including 4 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size all as directed by Engr-in-Charge..

M&L for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 6 sqmm 1100 volt grade drawn into PVC casing capping of suitable size including 6 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size all as directed by Engr-in-Charge..

Taking down old submain wiring and M&L for sub main wiring with four single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into PVC casing capping of suitable size including 4 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size all as directed by Engr-in-Charge.. Note: Four single core cable, earth wire and conduit / casing capping shall be measured as one length.

Taking down old submain wiring and M&L for sub main wiring with four single core multistranded PVC insulated copper conductor FRLS Cable of size 6 sqmm 1100 volt grade drawn into PVC casing capping of suitable size including 6 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including taking down old unserviceable/burnt wiring of any type or size all as directed by Engr-in-Charge.. Note: Four single core cable, earth wire and conduit / casing capping shall be measured as one length.

S & F MCB SP 5 to32 amps, . Make : L & T/ Standerd/Havells/ABB

S & F MCB SPN 06 to 32 Amps . Make : L & T/ Standerd/Havells/ABB

S & F MCB SPN 40 to 63 Amps Make : L & T/ Standerd/Havells/ABB

S & F MCB TPN 40 to 63 Amps Make : L & T/ Standerd/Havells/ABB

S &F in replacement lamp holder, Insulated body with back plate for batten fitting

S & F in repairs thermostats ISI marked as required at site for geyser of capacity 25/35/50 Ltr of any make all as directed by Engr-in-charge

S & F in repairs of safety valve/high pressure valve ISI marked as per site requirement or all as per directed by Engineer-in-Charge.

S & F in repairs heating element of rating 1/1.5 KW as required at site including rubber washers all as specified and directed by Engr-in-charge..

S & F in repairs heating element of rating 2 KW as required at site including rubber washers all as specified and directed by Engr-in-charge..

S & F in repairs of PVC pipe with brass hexagonal adopters both side, suitable for 15 mm dia pipe 60 cm long for cold water connection all as specified and directed by Engineer-in-charge.

S & F in repairs metal braided PVC/CP pipe with brass hexagonal adopters both side, suitable for 15 mm dia pipe 60 CM long for hot water connection all as specified and directed by Engineer-in-charge.

S & F in repairs, non return valve 15 mm dia of brass, ISI marked all as specified and directed by Engineer-in-charge.

M & L for preparation of steel surface and applying of one coat of syntheic enamel paint white including writing of MES Nos with black paint complete to geysers of any capacity or make all as specified and directed by Engineer-in-charge.

M & L for refixing of geysers of any capacity to walls by grouting with new nut,bolts and refiixng the geysers at a location directed by Engr-in-charge complete with all necessary pipe connections, testing.

S&F plug top 16 Amps flush type

M & L for stop valve, cast copper alloy screw down high pressure crutch handle, screwed both end for iron pipe suitable for 15 mm bore

M & L for rewinding of ceiling fans of 1200 mm sweep of any make by spilt opening the fan carring cutting the the burnt widing and cleaning the slots and rewinding with supper enamelled copper winding wire appropriate gauge including varnishing and replacement of flexible cable 23/0.0076 mm to the required length, making connection and testing complete all as specified and directed by Engr-in-Charge. Note : (a) Bearing will measured and paid separately under relevant item of sch

All as per item No 65 above but Exhaust Fan of sweep 275-300 mm

All as per item No 65 above but Exhaust Fan of sweep 350-450 mm

Supply only ball bearing(DE/NDE) to match the existing make suitable for 1200/1400 mm sweep ceiling fan including greasing complete all as specified and directed by Engr-in-charge. Make : SKF/NBC or equivalent

Supply only ball bearing to match the existing make suitable for 275-450 mm exhaust fan inclduing greasing. Make : SKF/NBC or equivalent

S & F only fan regulator suitable for 1200/1400 mm ceiling fans (electronics step type) Make-Anchor

Supply and fix capacitor 2.5 mfd for ceiling fan all as specified and as directed by Engr-in-chargeMake:Havells/Epcos)

Supply and fix capacitor 4 mfd for exhaust fan all as specified and as directed (Make:Havells/Epcos)

Supply and fix water heater storage type of capacity 25 liters vertical / horizontal type wall mounted with suitable supports and for manual operation, digital temperature display, feather touch buttons, built in thermostate auto shut off, powder coated single line weld container with PUF insulation, heating element capcity of 1.5/2 KW voltage rating 230 Volts frequency 50 Hz 5 star rated with and including steel braied connecting hoses for Hot / Cold water pipe connecting to CPVC and GI pipe all as specified and directed by Enginer-in-charge Make : Havells/ Racold / Crompton/ usha

Taking down including supply and fix high pressure resistance inner body and special enamel coaed inner tank complete for storage water heater of any capacity and of any type (vertical / horizontal) suitable for exisitng (make) water heater including PUF insulation all as specified and directed by Engineer - In - Charge.

Taking down carefully old unserviceable existing copper strip of size 20 mm x 3 mm and Supply & fix copper strip 20 mm x 3 mm complete with saddles and fixing screws for fitting the strip all as specified and directed by Engr In Charge.

Supply & fix in replacement /repair Aluminium strip 25 mm x 3 mm complete with saddles and fixing screws for fitting the strip all as specified and directed by Engr In Charge.

Supply & fix in replacement /repair Aluminium stripGalvanised iron strip 32 mm x 6 mm complete with saddles and fixing screws for fitting the strip all as specified and directed by Engr In Charge.

Fixing in repair copper strip 20 mm x 3 mm complete with saddles and screws for fitting the strip.

Fixing in repair copper strip 32 mm x 6 mm complete with saddles and screws for fitting the strip.

M&L for Air terminations single pointed Aluminium rod 12 mm dia and 300 mm long with necessary fixing arrangements on roof including taking down old all as directed.

Supply & fix four pointed ( centre tip 150mm and side spike 75mm) copper spike lighting arrester heavy duty copper rod opf size 15 mm dia both end screwed for easy fitment and 1.5mtr long and heavy duty copper base plate duly drilled on four corners of size 75mm x 75mm ,with necessary fixing arrangement on Top/side of pole complete including taking down old all as spcified and directed by Engr- in - Charge.

Supply and fix test point terminal block made out of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex. head screw including taking down old all as spcified and directed by Engr- in - Charge..

Material and labour for cement concrete in foundations/ trench filling and mass concrete type C2 1:3:6 (40mm graded aggregate) complete all as specified and directed by Engr-in-Charge.

Material & labour for fixing of 50mm bore GI Pipe medium grade galvanised 1.5 mrt. long fixed on wall with proper fixing and clamping of strip & 1.5 mtr to 300mm long copper/Aluminium lightening arrester rod with all fitting and fixed complete to wall or roof top of bldg. (Note: Joints shall be made with welding to get proper conductivity)

Material and labour in repairs for copper earthing complete with copper earth plate 60 cm x 60 cm x 3.15 mm thick burried directly in ground (earth pit not less than 3.25 mtr below nor mal ground level ) with top edge of the plate not less than 3.25 mtr below normal ground level connected to copper earth strip of size 20 x 3 mm by means of bolts check nuts and washers of brass/ bronge all as shown in electrical plate no 5 connecting to earthing test point all as specified and indicated and testing on completion including excavation earth work drilling holes for electrode PCC pit in PCC 1:2:4 type B1 using 20mm graded stone aggregate, RCC precast cover 1:2:4 type B1 using 20mm graded stone aggregate, GI pipe 40 mm dia (medium grade) and MS funnel, wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal in black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as per the sketch given in particular specification, GI wire suitable size and length for continuity earth wire from test point to main distribution Board etc., complete all as directed. Note:- Quoted rates shall be deemed to include for earth strip with protection pipe up to 7.5 M length. All the joints shall be made with welding to get proper conductivity. Rate required deemed to be including excavation by compressor machine or breaker for soft /disintegrated rock to required depth and results of earthing should be below 1 Ohm.

M & L for maintenenace/servicing including attending fault on call basis and repairs philiux major with standard OT light of capacity (120000/70000Lux) Make Phililux, as per prescribed in repairs and maintenance manual, including fixing/replacement of spare parts (if required). The maintenance schedule shall be under of each OT (i) Dismantling the complete OT light fittings (ii) Checking and servicing/repair and maintenance of OT Lights (iii) After the repairing/servicing/Maintenence, reinstlltion realignment of OT fittings Note:-(i) Spares requried for above maintenece will be measured and paid separeataly under relevant items of Sch 'A' (ii) Servicing of the above item shall be carried out by the authorized service providers specially for OT light of Philips make and a certificate from the manufactured i.e M/s Philips Electronics India Pvt Ltd. (Philips Health Care) on this regard shall be furnished by contractor before carrying out the work. (iii) Any break down between in contract period should be attended by contractor

M & L maintenance /servicing including attending fault on call basis and repairs, Phililux Mobile OT light capacity Make: Phililux, as per prescribed in repqirs and maintenance manual, including fixing / repalcement of spare parts (if required). The maintenance schedule shall be under of each OT (i) Dismantling the complete OT light fittings (ii) Checking and servicing/repair and maintenance of OT Lights (iii) After the repairing/servicing/Maintenence, reinstlltion realignment of OT fittings Note:-(i) Spares requried for above maintenece will be measured and paid separeataly under relevant items of Sch 'A' (ii) Servicing of the above item shall be carried out by the authorized service providers specially for OT light of Philips make and a certificate from the manufactured i.e M/s Philips Electronics India Pvt Ltd. (Philips Health Care) on this regard shall be furnished by contractor before carrying out the work. (iii) Any break down between in contract period should be attended by contractor

Supply only diffusers for for Phililux major with standard OT light Make: Philips or recommended by manufacturer or service provider.

Supply only Reflector for Phililum major with standard OT lights Make: Philips or recommended by manufacturer or service provider.

Supply only Bulb Holder for Phililum major with standard OT light Make: Philips or recommended by manufacturer or service provider.

Supply only Halogen Bulb 12 V 50 Watts for Philium major with standard OT light Make: Philipsor recommended by manufacturer or service provider.

Supply only filter glass for Phililum major with standard OT lightMake: Philipsor recommended by manufacturer or service provider.

Supply only Rotary Switch CL 05 for Phililux major with Standard OT light Make: Philips or recommended by manufacturer or service provider.

Supply only Rotary Switch CL 06 for Phililux major with Standard OT light Make: Philipsor recommended by manufacturer or service provider.

Supply only Condensor CL 01 for Phililux major with standar OT light Make: Philipsor recommended by manufacturer or service provider.

Supply only fuse holder and base for major with standerd OT light light Make: Philips or recommended by manufacturer or service provider.

Supply only Condensor CL 02 for Phililux major with standard OT lights Make: Philips or recommended by manufacturer or service provider.

Repair to CVT 12V 250 by replaceing following burnt items (i) Internal wiring as per existing size.(ii) Burnt MCB of existing capacity (iii) Replacment of multi tap ,stepdown transformer of existing capacity, (iv) Trial and testing completely directed by Engineer in charge

Repair to CVT 12V 500 by replaceing following burnt items (i) Internal wiring as per existing size.(ii) Burnt MCB of existing capacity (iii) Replacment of multi tap ,stepdown transformer of existing capacity, (iv) Trial and testing completely directed by Engineer in charge

metro electrical services

MAYUR ELECTRIC SERVICES

AN-ICON Engineering Technologies And Infrastructure Developments Pvt. Ltd