Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹42.0 L+₹2.3 L (5.75%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹42.2 L+₹2.4 L (6.11%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹43.6 L+₹3.9 L (9.73%)Rejected-Finance 96 SHASTRI NAGAR SHASTRI NAGAR JAMMU JAMMU KASHMIR 180004 | JAMMU | JAMMU AND KASHMIR | 180004 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹47.1 L+₹7.4 L (18.7%)Rejected-Finance 5 A LANE 1 GREATER KAILASH JAMMU J K 180011 | JAMMU | JAMMU AND KASHMIR | 180011 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
25 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Satwari
GE Satwari Jammu
COMPREHENSIVE REPAIRS OF TOILET AND KITCHENS OF CERTAIN OFFRS MD ACCN OF ZONE I AND II OF SATWARI GARRISON UNDER GE SATWARI
2022_MES_571754_1
GEJM-62/2022-23
Open Tender
Civil Works
Item Rate
270 days
Satwari Cantt
D Class Cat a i b i
9 documents required · 9 mandatory
₹500
GE Satwari
₹98,000
Yes
5 Apr 2023
28 Dec 2022
27 Jan 2023
28 Dec 2022
25 Jan 2023
12 Jan 2023
Amount
Note :- 1. Work will be carried out upto 4th storey of bldgs also as per direction of Engr-in-charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account. 2. Contractor should also resolve the day to day problems/ complaint related to item no 01 to 216 in piece meal as per requirement and give the feedback to the Engr-in-charge within next 24 hours about the work done and complete site will not be vacated for the same, only requirement basis site for work will be handed over and work will be carried out up to 4th storey. 3. The contractor shall be provided with space for setting up maintenance cell at the specified location as per the directions of engineer in charge which shalled be manned by the supervisor responsible for collecting complaints from the concerned JE/AGE. However, no additional payment other than those measurable below shall be made to the contractor. The recovery for non-complaince shall be made as per provisions given in Sch 'A' notes.
Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified. Note :- Work will be carried out upto 4th storey of bldgs also as per pirection of Engr-in-charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account.
M&L for rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 4th storey with necessary scaffolding) complete all as specified and as directed by Engineer-in-charge.
M&L for rendering cement plaster, 15 mm thick on fair faces of brick/concrete surfaces of wall in cement mortar 1:6 finished even and smooth w/o using extra cement complete all as specified.
M&L for rendering 10 mm thick on fair faces of brick or concrete surface ceilings, in cement mortar 1:3 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
Preparation of new plastered or unplastered surfaces of ceilings to achieve smooth and even surface and applying three coats of white washing complete all as specified and as directed by Engineer-in-charge.
Material ad labour for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and preparing the surfaces for distempering and incl a coat of primer complete all as specified.
Writing letters or figures (Block, Roman. Italic or Indian) n.exc 30cm high including obliterating old writing of any description n.exc 0.2 Sqm with paint to match existing work complete all as specified Such as NP-02,P-101,T-104
Preparation of new plastered/ concrete surfaces of walls to achieve smooth and even surface and applying two coats of cement based paint over and including one coat of primer (up to 4th storey with necessary/scaffolding) complete all as specified and asdirected by Engr-in-charge.
Preparation of new plastered/ concrete surfaces of walls to achieve smooth and even surface and applying two coats of weather proof acrylic emulsion paint over a coat of primer (up to 4th storey with necessary/scaffolding) complete all as specified and asdirected by Engr-in-charge.
M&L for repairing of concrete surfaces width n exc 100 mm such as balcony, chajjas, upward or downward facias ,column, pillar, ceiling and similar items with plain cement concrete 1:2:4 type B-0 or rendering 10-15mm thick as per site requirement in CM 1:3 without using extra cement finished even and fair complete and preperation of newly plastered surfaces and applying two coats of weather proof exterior emulsion paint incl a coat of primer and match the shade with existing painted surfaces all as specified all as specified and directed (Note:- Rates to be quoted Up to fourth storey bldgs and including necessory formwork and scaffolding required as per site condition also taking down or dismantling as required at site.
M&L for repairing of concrete surfaces width exc 100 mm and n exc 400 mm such as balcony, chajjas, upward or downward facias ,column, pillar, ceiling and similar items with plain cement concrete 1:2:4 type B-0 or rendering 10-15mm thick as per site requirement in CM 1:3 without using extra cement finished even and fair complete and preperation of newly plastered surfaces and applying two coats of weather proof exterior emulsion paint incl a coat of primer and match the shade with existing painted surfaces all as specified all as specified and directed (Note:- Rates to be quoted Up to fourth storey bldgs and including necessory formwork and scaffolding required as per site condition also taking down or dismantling as required at site.
Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specied and directed.
Material and labour glazed ceramic coloured Digital tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 complete all as specified. Make : Somany, Kajaria, Sunhearrt (Sample as approved & Kept in GE's sample room)
Material and labour Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in CM 1:4 complete all as specified. Make : Somany, Kajaria, Sunhearrt (Sample as approved & kept in GE's sample room)
Description all as item No 15 but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thick complete.
Material and labour Vitrified Ceramic dark shade (Double Charged) edge cut joint free coloured or printed any shade tiles 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match over and including 15 mm thick screed bed in CM 1:4 along with spacer and thye gap filled with epoxy mortar all as specified and directed. Make : Somany, Kajaria, Sunhearrt (Sample as approved & Kept in GE's sample room)
Description all as item No 17 but as in vertical surfaces dado/skirting over a backing coat of CM 1:4, 10 mm thick complete.
M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 as directed by Engr-in-charge.
M&L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and as directed.
M&L Machine cut kota stone slab flooring 18-20 mm thick over and including cement screed bed laid and jointed cement screed bed laidand jointed with grey camant slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for tread of staircase over and including 15mm thick screed bed in CM 1:4 all as specifid and directed
M&L Machine cut kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for risers of staircase over and including 10mm thick fair and even plaster in CM 1:4 after roughing surfaces of old concrete/any type of plaster by picking sweeping down with water to remove dust etc.
M&L for 40 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in plinth protection all as specified and as directed.
Taking down shutters of any description exc 1.00 Sqm and n.exc. 2.00 sqm each and removing from the site all as specified & directed.
Taking down chowkats or frames with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site all as specified.
Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 Sqm & n.exc 4 Sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site all as specified.
Taking down shutters of any description n exc 1 Sqm Each including cutting holes for taking out hold fast or dismantling brick work and removing from site all as specified.
S&F for Aluminum Powder coated aluminium window and ventilator shutters, Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary glazing and locking arrangements etc. complete including the provison 150 mm dia exhaust fan in to the each ventilators and the ventilator n exc 0.75 sqm all as specified and as directed.
S&F pressed steel frames of size 125mm x 60mm made out of size 1.25mm thick MS sheet for doors double rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixing lugs, hold fast, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including PCC 1:3:6 as in back fill to chowkats all as Specified.
S&F pressed steel frames of size 105mm x 60mm made out of size 1.25mm thick MS sheet for doors single rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixing lugs, hold fast, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including PCC 1:3:6 as in back fill to chowkats all as Specified.
Supply and fixing Factory made, plain framed, panelled shutter (two Panel) 35mm thick, 2nd class Hardwood with lock rail and panel of 9 mm B.W.P commercial ply. The size of rail and stiles as per as per IS:1003 (Part-I),kiln seasoned and chemically pressure treated complete all as directed by Engr-in-Charge.
Supply and fixing 35mm thick 2nd Class hard wood glazed,gauzed and skelton shutters open rebated and prepare to receive glass, gauge etc but divided into squares with plain chamfered or rounded mitred and rebated sash bars, stiles and rails as specified in SSR Part-I Sec 8 clause 8.24 (a) complete all as specified.
S&F Flush shutters, 35 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. Note :- Sampel approved by Engr-in-Charge or GE.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls, complete all as specified and as directed by Engr-in-Charge.
Ditto all as per item No 35.00 but wood grain printed PVC sheet used instead of Plain colour PVC sheet all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppplying and fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engr-in-Charge.
Ditto all as per item No 37.00 above but but wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading and all as specified and as directed.
Taking down of old/unserviceable kitchen cabinet/cupboard including all fixture and fitting, complete all as specified and directed. Note: For measurement superficial area in elevation shall be measured.
S&F factory made 18mm(+0.7mm) thick celuka glossy finish PVC foam ply of density 600Kg/cbm manufacured by an ISO 900-2008 certified company. One side prelam and other side plain18mm thick Celuka PVC ply for kitchen cabinet shutter and also manufactuer's test report and test certificate is mandatory with each and every supply of the material complete as per manufacturer's specifications and drawing and as directed.(Colour as directed by ENGR-in-CHARGE).
S&F factory made 18mm(+0.7mm) thick celuka PVC ply of density 600Kg/cbm manufacured by an ISO 900-2008 certified company. Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the material complete as per manufacturer's specifications and drawing and as directed.
S&F factory made 5mm thick PVC of density 600Kg/cbm manufacured by an ISO 900-2008 certified company. Plain 5mm thick PVC sheet paneling for back side (wall side) and also manufacurer's test report and test certificate is mandotary with each and every supply of the material complete as per manufacturer's specifications and drawing and as directed.
S&F telescopic heavy duty drawer channels soft closer of size 450m length (In closed position) fixed in PVC ply with brass screws as in drawers complete all as specified and as directed. Make:- Hettich, Godrej or equivalent.
S&F Auto hinges of size 150mm length fixed in cupboards with screws for holding stainless steel brackets complete all as specified and as directed. Make : Hettich, Godrej or equivalent.
S&F steel fastners of size 75mm long drilled and fixed to walls complete all as specified and as directed.
S&F 50mm dia and 75mm long Stainless steel supports fixed with bolt at bottom of cupboards box all as specified.
S&F stainless steel designer handles ( heavy type ) 100 mm size fixed in drawers or shutters as in cupboards complete all as specified and directed. Make: Kich, Hettich, Godrej
S&F stainless steel designer handles ( heavy type ) 150 mm size fixed in drawers or shutters as in cupboards complete all as specified and directed. Make: Kich, Hettich, Godrej
M&L for pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats including butt hinges 100 mm long. Piano hinges measured separately.
M&L for prelaminated MDF board 19 mm thick as in shutters/shelves (exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame worknincluding lipping (15 mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all as specified and as directed by Engr-in-Charge.
S&F in repair continuous (piano) hinges,Width of flaps (when open) 30 mm heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified. ( ISI Marked)
S&F butt hinges of mild steel cold rolled medium weight of size 100mm as specified.
S&F butt hinges of mild steel cold rolled medium weight of size 125 mm as specified.
S&L for stainless steel medium weight Butt hinges, 100mm , complete all as specified and as directed
S&F Aluminium anodised, barrel tower bolts size 150 mm of extruded section and fixed complete all as specified. (ISI Marked)
S&F Aluminium handles, fabricated type, anodised size 100mm, anodised section and fixed complete all as specified. (ISI Marked)
S&F Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.
S & F hasp & staple safety type aluminium anodised with mild steel hinges Spin including bolt to hinges plate fixed with screws of 75 mm in length.
S&F aluminium hanging floor door stopper,Twin rubber stopper,size 100mm , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
M&L for 50 mm magnetic catches with brass body and striking plate including letting in as fixed complete all as specified and directed.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified. ( ISI Marked)
S&F in repair aluminium bottom door seal with brushes, length 1.2 mtr, fix with screw, suitable for wooden door complete all as specified.
Supply and fixing in repair mild steel helical ordinary rat tail rod pattern springs 300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work all as specified and as directed.
Supply and fixing 5 mm thick sheet glass ordinary quality coloured/tinted and glazed in squares, n.exceeding 0.5 Sqm in each pane.
Material & labour factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section (60x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings/openning for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (ii) PCC block for embedding lugs.
Ditto all as per item No 66 but in Ventilators any size.
S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways railings framework of water tanks and similar work conforming to Fe.290.Gde-E-165
Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum (up to 4th storey) frames or stone concrete or brick surrounds glazed with putty or fixed with beads.
S&F 4 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), all as specified.
S&F 4 mm thick figured glass, pin head type and glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/ Wood/ Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), all as specified.
Supply and fixing Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples fixed with stainless steel wire staples complete all as specified.
Supply and fixing in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples fixed with stainless steel wire staples complete all as specified.
S&F in repair Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses Also available all as per directed and specified. Make :- Jaquar, Cat no CQT-23167B or equivalent in Cera/hindware
Supply and fixing in repair wall mixer non telephonic shower arrangement with connecting legs and wall flanges, cast copper alloy, chromium plated, complete all as specified Make : Jaquar, Cat No-CQT-23219 or equivalent in Cera/Hindware.
S&F in repair Wall Mixer 3-in-1 System with Provision for both Hand Shower & Overhead Shower Complete with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Flanges (without Hand & Overhead Shower) complete all as specified. Make:- Jaquar, Cat No:- CQT-23281UPR or equivalent in Cera/ Hindware.
S&F in repair Hand Shower 120mm dia Round Shape Multi Flow with Cascade Effect (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System complete all as specified. Make :- Jaquar, Cat No- HSH1731 or equivalent in Cera/ Hindware.
S&F in repair Sink Mixer with Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges complete all as specified. Make:- Jaquar, Cat No- CQT-23309 or equivalent in Cera/Hindware.
S&F in repair Bib Cock with wall flange cast copper alloy, chromium plated fancy type, complete all as specified. Make : Jaquar, Cat No:-SQT-23047 or equivalent in Cera/hindware.
S&F in repair 2 way CP Bib Cock with wall flange, cast copper alloy, chromium plated fancy type, sutable for 15 mm GI pipe, complete all as specified. Make :- Jaquar, Cat No:- CQT-23041 or equivalent in Cera/hindware.
S&F in repair angle cock with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified. Make:-Jaquar, Cat No- CQT-23059 or equivalent in Cera/Hindware
S&F in repair Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-069) complete all as specified. Make:- Jaquar, Cat No:-CQT-23069K or equivalent in Cera/hindware.
S&F in repair 15mm bore Stop valves, cast copper alloy,fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed , complete all as specified. Make:- Jainko, Essco, Prayag.
S&F in repair 15mm bore CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. Make:- Jainko, Essco, Prayag.
S&F in repair Sink Cock with Swinging Spout (Wall Mounted Model) with Wall Flange complete all as specified. Make:- Jaquar, Cat No:- CQT-23347 or equivalent in Cera/Hindware.
Supply and fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make: Essco/Jainko/Prayag.
S&F in repairs jet spray mild steel chromium plated for 15 mm dia pipe with 1 Mtr ling flexible tube all as specified and as directed. Make:- Jainko, Essco, Prayag.
S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified. Make:- Jainko, Essco, Prayag
S&F in repair Chromium plated, towel ring, complete all as specified. Make:- Jainko, Essco, Prayag.
S&F in repair chromium plated towel rack 600mm long without lower hangers,Stainless steel complete all as specified. Make :- Jaquar Cat No- AKP-35781PFS or equivalent in Cera/hindware.
S&F in repair stainless steel Soap dish holder complete all as specified. Make:- Jainko/Essco/Prayag.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long . Complete all as specified. Make :- Jainko, Essco, Prayag
S&F in repair Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge. Make:- Jainko/Essco/Prayag.
S&F in repair waste coupling of chromium plated brass 32 mm dia with long screwed shank and fly nuts complete as suitable for wash hand basin all as specified . Make :- Jainko, Essco, Prayag
S&F in repair waste coupling of chromium plated brass 40 mm dia with long screwed shank and fly nuts complete as suitable for wash hand basin all as specified . Make :- Jainko, Essco, Prayag.
S&F in repair PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore. Make :- Jainko, Essco, Prayag
S&F in repair PVC connection 15 mm x 600 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore. Make :- Jainko, Essco, Prayag
S&F in repair Brass chromium plated shower rose with or without swivel joints, 125mm size, including fixing to steel pipe or union Make :- Jainko, Essco, Prayag
S&F in repair Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories Set and Accessories Set,Cistern fittings, Size: 660 x 365 x 765mm, S Trap-300mm complete all as specified. Make :- Cera, Cat No- S1013105 or equivalent in Hindware/Jaquar.
S&F in repair under counter basin white colour with fixing accessories set, size: 560 x 470x190, Oval shape, including CP Waste Coupling and PVC waste pipe complete all as specified. Make :- Cera, Cat No- S2030104 or equivalent in Jaquar/ Hindware.
S&F in repair Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass. complete all as specified and as directed by Engineer-in-charge. Make :- Cera, Cat No- S2040119 or equivalent in Jaquar/ Hindware.
S&F in repairs 32 mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed all as specified and as directed. Make :- Cera, Jaquar, Hindware.
S&F in repair full pedestal for WHB complete all as specified. Make :- Cera, Cat No- S2090113 or equivalent in Jaquar/ Hindware.
S&F in repair PVC valveless, syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and as directed by Engineer-in-charge. Make:- Cera, Cat No- B1010109 ( CONGO) or equivalent in Jaquar/ Hindware.
Supply and fixing in repair PVC Seat cover for EWC pan (White ) of standardd quality including hinges bolt etc all as directed by Engr-In-Carge. Make: CERA Cat No- B1510121 or equivalent in Jaquar/ Hindware.
Supply and fixing in repair Vitreous china ware pedestal type water closet white, with 'P' or 'S' trap including self closing seat cover, closed pattern with flat bottom,complete all as directed. Make:- Cera, Cat Part No- S1053101 or equivalent in Jaquar/ Hindware.
S&F in repair WC Orissa pattern white with integral foot rest 580x 440 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and removal of old WC seat unhygienic condition) Make:- Cera, Cat Part No-S3010102 (CALINA) or equivalent in Jaquar/ Hindware.
Supply and fixing in repair sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 610mm x 460mm bowl size 560mm x 410mm x 200mm complete with CP waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge. Make: Jainko, Model No- SSJ-1. & equivalent in Prayag, Nirali, Jayana.
S&F sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm & bowl size 410mm x 355mm x 200mm complete with CP waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge. Make:- Jainko Model No .-SSJ-8. & equivalent in Prayag, Nirali, Jayana.
S & F Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size (30"x36"x10") fixed with steel fastners or steel screw complete. Make:- Jainko, Model No.KRJ-4. and equivalent in Prayag, Nirali, Jayana.
Supply and fixing in repair, brass face as per sample for CP/Brass Bib tap, Angle/Stop cock, Pillar cock, wall mixer, WHB mixer, concealed stop cock etc for 15 mm bore pipe complete all as specified and as directed by Engineer-in-charge.
S&F in repair SS seat cover hinges all as specified and as directed.
S&F in repairs 25 mm dia Curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc
S&F in repirs SS Curtain finials dia 75 mm for fixing of 25 mm dia curtain rod pipes
S&F in repair stainless steel lock grating plain/hole size 100 mm dia including embeding in tiles with white cement. Make:- Jainko Cat No : SGJ-4 or equivalent in Essco, Paryag.
Supply and fixing in repair PVC Waste pipe 32mm bore of required length complete .Make: Prayag Cat No 329 or equivalent in Polytuf/ Jindal.
Dismantling water tanks and removing to store of water storage tanks (Cap. 500 ltr to 1000 ltr ) complete all as specified and directed by Engineer-in-charge.
Dismantling water tanks and removing to store of water storage tanks (Cap. 250 ltr to 500 ltr ) complete all as specified and directed by Engineer-in-charge.
Demolition of Cement Concrete of any description and in any position as in concrete water tanks and bases and make surface fair all as specified. (Ist and IInd floor roof terrace).
Supply and fixing Rotational moulded polyethylene water storage tanks of 1000 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making inlet/outlet connections complete all as specified. Make : Vectus, Sintex, Sheetal.
Supply and fixing Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making inlet and outlet connections complete all as specified Make : Vectus, Sintex, Sheetal.
Disconnecting of water tank of 500 ltr capacity setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing,etc. measured separately).
Cleaning and removing all scale and dirt etc, from exc 250 & n exc 500 litres capacity tanks in any position and from mouths of circulating pipes etc, and disinfection completely by making all the arrangements complete all as directed.
Cleaning and removing all scale and dirt etc, from exc 500 & n exc 1000 litres capacity tanks in any position and from mouths of circulating pipes etc, and disinfection completely by making all the arrangements complete all as specified and as directed.
Writing letters or figures (Block.Roman, Italic or Indian) n exc. 30 cm high
Supply and fixing in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 25 mm bore pipe, including making connections complete all as specified and fixed.
Supply and fixing in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 20 mm bore pipe, including making connections complete all as specified and fixed.
Supply and fixing in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore pipe including making connections complete all as as specified and fixed (Minimum weight 20mm-210 gms). Make: Prayag, or equivalent in Polytuf/ Jindal
S&F in repair PVC tank covers required for 500 ltr to 1000 ltr PVC water tanks complete all as specified and fixed
Taking up or down steel tubing of 15 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed
Taking up or down steel tubing of 20 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed
Taking up or down steel tubing of 25 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed
Taking up or down steel tubing of 40 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed
Supply and fixing tubes 'medium grade' galvanised, 15 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge Make:- Jindal, TATA, Prakash Surya
Supply and fixing tubes 'medium grade' galvanised, 20 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge. Make:- Jindal, TATA, Prakash Surya
Supply and fixing tubes 'medium grade' galvanised, 25 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge.Make:- Jindal, TATA, Prakash Surya
Supply and fixing tubes 'medium grade' galvanised, 40 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge.Make:- Jindal, TATA, Prakash Surya
Supply and fixing fittings for steel tubing galvanised, 15 mm bore, such as bends, tees, elbows, unions, short pieces,connectors, back nuts, etc complete all as specified and as directed
Supply and fixing fittings for steel tubing galvanised, 20 mm bore, such as bends, tees, elbows, unions, short pieces,connectors, back nuts, etc complete all as specified and as directed
Supply and fixing 16 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete as per direction of Engineer in Charge. Make:- Finolex, Astral, Supreme.
Supply and fixing 20 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete as per direction of Engineer in Charge. Make:- Finolex, Supreme, Astral.
S&F brass elbow 20 mm outer dia all as specified.
S&F brass elbow 20 mm outer dia (3/4x1/2) all as specified.
S&F brass Tee 20 mm outer dia all as specified.
S&F male brass threaded adapter 20 mm dia((MTA/MBTA)
S&F female brass threaded adapter 20 mm dia. ((FTA/FBTA)
S&F brass elbow 25 mm outer dia all as specified.
S&F brass Tee 25 mm outer dia all as specified.
S&F male brass threaded adapter 25 mm dia((MTA/MBTA)
S&F female brass threaded adapter 25 mm dia. ((FTA/FBTA)
Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend,branch pieces, connectors, heel rest bend etc and removing from site all as specified and directed
Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge. Make -Astral, Supreme, Finolex
Supply and fixing UPVC(SWR) type B pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge. Make -Astral, Supreme, Finolex
Supply and fixing 40 mm dia upvc pipes of pressure rating 10 kgf/Sqm incl all necessary fittings laid in trneches and walls all as specified and as directed.
Supply and fixing 32 mm dia upvc pipes of pressure rating 10 kgf/Sqm incl all necessary fittings laid in trneches and walls all as specified and as directed.
Supply and fixing, UPVC (SWR) , bends for 75 mm bore , complete all as specified and as directed by Engineer-in-charge. Make -Astral, Supreme, Finolex
Supply and fixing, UPVC (SWR) , bends with access door for 75 mm bore , complete all as specified and as directed by Engineer-in-charge. Make -Astral, Supreme, Finolex
Supply and fixing, UPVC(SWR) , bends for 110 mm bore complete all as specified and as directed by Engineer-in-charge. Make -Astral, Supreme, Finolex
Supply and fixing, UPVC(SWR) , bends with access door, for 110 mm bore complete all as specified and as directed by Engineer-in-charge. Make -Astral, Supreme, Finolex
Supply and fixing, UPVC branch piece, single (single 'Y') with access door for 75 mm bore complete all as specified and directed. Make: Astral, Supreme, Finolex.
Supply and fixing, UPVC branch piece, single (single 'Y') with access door for 110 mm bore complete all as specified and directed. Make: Astral, Supreme, Finolex.
Supply and fixing, UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore , complete all as specified and as directed by Engineer-in-charge. Make -Astral, Supreme, Finolex
Supply and fixing, UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 110 mm bore , complete all as specified and as directed by Engineer-in-charge. Make -Astral, Supreme, Finolex
S&F UPVC (SWR) , reducers 110 mm dia complete all as specified. Make:- Astral, Supreme, Finolex.
S&F UPVC (SWR) vent cowl 75 mm dia complete all as specified. Make -Astral, Supreme, Finolex
Supply and fixing in repair UPVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. Make -Astral, Supreme, Finolex
S&F in repair, UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.Make -Astral,Supreme, Finolex
Rendering 15mm thck in CM 1:3 or Plain Cement Concrete as in sunken floors without extra cement on walls/floors and including mixing of water proofing compound (WPC shall be measured and paid separately)
M&L applying a coat of bituminous primer conforming to IS-3384 on prepared surface of roof/sunken slab after drying of primer apply APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced torched application and finally apply a coat of hot blown 85/25 graded bitumen conforming to IS-702 @ 1.2kg /sqm of plaster surface.
M&L Cement concrete type E-2, 1:5:10 ( 40 mm graded agregate) in Sunkan ( Up to 4th floor) filling and mass concrete complete all as specified and directed by Emgr-in-charge.
M&L 40 mm dia G I tubing heavy grade galvanised laid over floors as a spout pipe in sunken floors all as specified.
Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material from the work site ouside defence premises complete all as specified.
M&L for brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge
M&L for brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 but except bricks complete all as specified and as directed by Engineer-in-charge
M&L Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.
Material and labour for Providing, cement concrete 1:2:4 type B-1 (using 20mm graded aggregate ), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.
Demolition of cement concrete (unreinforced) ground floor to 4th floors and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site out side defence premises complete all as specified.
M&L for Plain cement concrete (1:3:6), type C-2 (using 40 mm graded crushed stone aggregate) nominal mix, 75 mm thick, as in sub base of floors, finished even and fair complete all as specified and as directed by Engineer-in-charge.
M&L for 25 mm thick cement concrete 1:2:4, type B-0, (using 12.5 mm graded crushed stone aggregate) as in sub base/ levelling course of floors, finished even and fair complete all as specified and directed.
Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster any thickness and removal of debris off the premises including grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt/dust.
M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.
M&L Rendering 15mm thck in CM 1:3 on Concrete surfaces of roof finished fair & even and including mixing of water proofing compound (WPC shall be measured and paid separately)
M&L for water proofing treatment in the following sequences:- (a) Applying 1st course of bituminous primer conforming to IS -3384 @ 0.4 Kg/Sqm cover the surface till the surface properly impregnated and insolvent oil primer evoporate completely. (b) Applying 2nd coat of blown 85/25 graded bitumen confirming to IS 702 @ 1.2 Kg/sqm. (c) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric membrane 3 mm thick weight not less than 3.6 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat complete all as specified and as directed . Make :-Torchstar, Asian Paint, Sieka.
Ditto all as per item No 185.00 above but as in patches exc 1 Sqm and n exc 3 Sqm all as specified and as directed.
M&L for preparation of newly sufrace of APP Membrane and applying two coats of bituminious based alumunium paint @ 200 ml per sqm etc
Supply only Water proofing compound liquid.
M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified.
M&L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.
Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of oil emulsion distemper on walls, pillars,cornices surface including making good uneven surface/holes with birla wall care putty coloured in same shade where ever required etc. complete all as specified and directed.
Complete removal of existing treatment by mechanically including washing, rubbing down with sand paper and stopping of distempered and painted surfaces including preparation of old plastered surfaces of walls and applying two coats of water bound distemper over a coat primer on walls over two coats of Birla wall care putty 1 to 2 mm thick on plastered surfaces, preparatory to distemper and applying the paint with paint roller complete all as specified and as directed by Engineer-in-charge.
Complete removal of existing treatment by mechanically including washing, rubbing down with sand paper and stopping of distempered and painted surfaces including preparation of old plastered surfaces of walls and applying two coats of water bound distemper over a coat primer on ceiling incl preparatory to distemper and applying the distemper with paint roller complete all as specified and as directed by Engineer-in-charge.
Complete removal of existing treatment by mechanically including washing, rubbing down with sand paper and stopping of distempered and painted surfaces including preparation of old plastered surfaces of walls and applying two coats of acrylic plastic emulsion paint over and including one coat of primer over two coats of Birla wall care putty 1 to 2 mm thick on plastered surfaces, preparatory to plastic emulsion paint and applying the paint with paint roller complete all as specified and as directed by Engineer-in-charge.
Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of cement base paint on walls, pillars, cornice etc (upto 4th storey with necessary scaffolding complete all as specified and directed.
Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying two coats of cement base paint on walls, pillars, cornice etc (upto 4th storey with necessary scaffolding complete all as specified and directed.
Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of painted surfaces including preparation of old plastered surfaces of walls, chajjas, fascia, face of columns, beams etc. and applying one coat of weather proof exterior emulsion paint making good uneven surface/holes with Birla wall care putty coloured in same shade where ever required etc (up to 4th storey with necessary scaffolding) complete all as specified and directed.
Preparation of old painted wooden surfaces having width/girth exceeding 10 cm including necessry putty filling with knife of same colour where required to achieve smooth and even surface and applying one coat of synthetic enamel paint on wood surfaces of any description (up to 4th storey with necessary scaffolding) complete all as specified and directed.
Preparation of old painted steel surfaces having width/girth exceeding 10 cm including necessry rubbing with sand paper or grinding by hand grinder to achieve smooth and even surface and applying one coat of synthetic enamel paint on steel surfaces of any description (up to 4th storey with necessary scaffolding) complete all as specified and directed.
Taking down carefully aluminium conductor point wiring (light, fan, socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.
Taking down of unsv Sub main wiring of any size
M & L for complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed for the following :- (a) One Light / Fan/ Exhaust Fan point controlled by one, one way switch 6 Amp complete
(b) One 3 pin socket outlet 6 amp independent
(c) One 3 pin socket outlet 6 amp same board
All as per srl item No 202 above but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.
Supply and fix in replacement of modular type switch, one way 6 Amps , 1 module complete all as specified and directed.
Supply and fix in replacement of modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed.
Supply and fix in replacement of modular type switch, one way 16 Amps, 1 module complete all as specified and directed.
Supply and fix in replacement of modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed.
Supply and fix in replacement of modular type fan regulator step down 120 Watt, 2 module complete all as specified and directed.
Supply and fix in replacement of ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.
Supply and fix in replacement of LED light fitting 1 x 18Watt, 220V, AC decorative box type with driver, holder including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing arrengenment all as directed by Engr in chage. Note:- The LED batten and LED tube rod shall be of same make.
Supply and fix in replacement of lamp holder,PVC /Polycarbonate type with back plate for batten fitting .
Supply and fix in replacement of LED lamp suitable for B22 holder of capacity 10 Watt.
Supply and fix in replacement of sub main wiring with single core cable 2x 6 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1 x 6 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.
Taking down and refixing of Ceiling fan/ Exhaust Fan any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer and down rode as per site requirenment all as specified and directed by Engr-in-charge.
AMRIT ENTERPRISES
M/S Sukhmani Construction Co.
M/S MOHAN LAL GUPTA
NARESH KUMAR AND COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .