REPAIR MAINT TO SEWAGE LINES, SEPTIC TANKS, SOAK WALL CLEANING OF SEWAGE LINES, SEPTIC TANKS, CLEANING OF OVERHEAD TANKS PLUMBING WORKS AT PERSONAL LINES OF CH (CC) CMDC INCLUDING VARIOUS WARDS IN THE AREA OF AGE EM UNDER GE EM LUCKNOW.

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed..

Demolition of cement concrete not exceeding 15 cm thickness, below or above ground level of any description complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in floors, finished even and rough to receive floor topping complete all as specified and directed.

M&L for coloured joint free Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.laid over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. all as specified and as directed.

M&L for coloured joint free Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.laid over 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed. all as specified and as directed.

M&L for 7 to 8 mm thick Joint free Non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles laid over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured printed joints free tiles of size 300x450 mm & 6 to 7 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles incl 10 mm plaster in CM (1:4) complete all as specified and directed

S&F 15mm steel tubes medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floor including taking down complete and all as specified and directed

S&F 20mm steel tubes medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floor including taking down complete and all as specified and directed

S & F in repair 15mm bib tap, fancy type chromium plated screwed down high pressure , with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed.

S & F in repair 15mm stop valves/Angle valve,fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15mm pillar taps cast copper alloy, chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs for Vitreous china wash hand basin white flat back size 550x400mm but exclusive taps, wastes, chain and plug and porcelain stopper but with and including cutting for and pinning in ends of brackets or erecting stand, 25 mm dia 800 mm long PVC waste pipe,& CP waste coupling 32mm dia and including brackets complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including flush pipe with white seat & cover with flat bottom with hinging device including all fitting, all as specified and directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe with and including 800 mm long PVC waste pipe / flush pipe , complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and incl 60mm long brass screws, pointing around urinals back in cement , fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe.

S&F in repair 10 ltrs capacity low level PVC flushing cistern, valveless, symphonic type, white,with inlet,ball float and handle including brackets complete and all as specified and directed.

S&F in repair 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod with high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap/Nahani trap plain with grating including jointing with solvent cement including 125 mm chromium plated grating with hole including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) complete all as specified and directed.

S&F in repair 15mm bore PVC connection 450mm long complete and all as specified and directed

S&F in repair 15mm bore copper connection 450mm long for hot water for gyser connection complete and all as specified and directed

M&L Tripple layer rotational moulded polythelene water storage tank in white colour 500 Ltr (Cylindrical vertical with closed top) hoisted and fixed in position including dismantling water tanks and remove from site complete all as specified and directed.

M&L Tripple layer rotational moulded polythelene water storage tank in white colour 1000 Ltr (Cylindrical vertical with closed top) hoisted and fixed in position including dismantling water tanks and remove from site complete all as specified and directed.

Taking down 75/ 110 mm rain water pipes, any pattern with all fittings complete all as specified and directed.

S&F PVC SWR pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, Type 'B', ISI marked of 110mm complete all as specified.

S&F PVC SWR pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, Type 'B', ISI marked of 75mm complete all as specified.

S&F PVC SWR bend/tee/socket/Y-Junction of any radius for 75mm pipes .

S&F PVC SWR bend/tee/socket/Y-Junction of any radius for 110mm pipes .

Taking down chowkhat or frames with shutter (without taking of shutters from the frame) exc 1.5 sqm n exc 4 sqm each complete all as specified and as directed

Taking down shutters of any description exceeding 1 Sqm n exc 2 Sqm each

M&L solid PVC frame ( single rebated) of size 50 mmx 47 mm made oud of5mm plain colour PVC sheet with homogenious fine cellular structure having smooth outer integral skin with suitable metal stifner & fixed with 100x8 sheet metal CSK (copper screws)screws complete all as specified and directed and as shown drawing . Make : Rajshree plastiwood/Sintex as per approved by GE.

M&L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed tothe stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Make : Rajshree plastiwood/ Sintex as per approved by GE.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, hold fast etc., complete, drilled for fixing of steel hanging conf to Fe-410-w or E -250 quality A complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial open on both side

S&F 19/20mm thick Particle board, exterior grade prelaminated both sides with decorative choice lamination, fixed with nails/ screw screws to timber frame work including liping work teak wood beading 6mm thick comple all as specified and directed

S/F in repair continuous piano hinges mild steel, bright finish or electrogalvanised width of flabs when open in 40 mm complete all as specified

S&F factory made steel tubular window with side hung shutters including box type hinges with steel handle and stel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per HQCELZ Lucknow Drg No LZ/C-TD/130 sheet 1/4 to 4/4 complete all as specified

S&F factory made steel tubular Steel window with side hung shutters including box type hinges with steel handle and stel peg stay complete without glazing bars dovetailed or welded complete all as as per HQCELZ Lucknow Drg No LZ/C-TD/130 sheet 1/4 to 4/4 complete all as specified

M&Lfactory made steel tubular Steel ventilators with top hung shutter including hinges, steel peg stay complete as as per HQCELZ Lucknow Drg No LZ/C-TD/130 sheet 1/4 to 4/4 specified and directed..S/F of 4.0 mm thick figured glass panes glazing with oil putty and cost deemed to be included in the item rate quoted).).

S&F Framed work such as grills, grating etc. with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F galvnanised mild steel wire cloth galvanized 0.45mm normal dia of wire and average width of aperture 1.18mm complete and all as specified and directed

S&F 3mm thick plain glass sheet and glazing with oil putty in squares n. exc 0.5sqm in each pane complete all as specified and directed.

S&F mild steell butt hinges, medium weight cold rolled size 100mm complete all as specified and directed.

S&F aluminium anodised handle "D" type of size 150mm complete all as specified and directed.

S&F 200mm long aluminium anodised tower bolt of extruded section complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

Cutting holes in brick wallls/ stone walls built in cement mortar for inserting holdfasts and making good dismantled portioned in CM 1:3 or cement concrete type B-1 using 20mm graded aggregate as required thickness of wall exc. half brick thick but n. exc one brick complete all as specified and directed.

Dismantling of steel work of any description in any positions not otherwise provided for complete

M&L for preparation of new steel surfaces of any description exc. 10 cm width or girth and applying two coat of synthetic enamel paint over a priming coat of red oxide complete all as specified.

M&L for preparation of old steel surfaces of any description exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Demolition of brickwork or stone masonary built in cm including all quins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete complete.

M & L brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

All as per item no.54 here in before but except bricks.

Taking down cement plaster from brick wall including racking out joints, hacking for key & scrubbing down with water where existing complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick or concrete surface, wall in CM 1:6 finished fair & even complete all as specified and directed

M&L 15 mm thick rendering on other than fair faces of brick or concrete surface, wall in CM 1:4 finished fair & even complete all as specified and directed

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls complete all as specified & directed .

M&L two coats oil bound distemper of approved shade on new plastered surface on wall over primer including preparation of surfaces complete and all as specified and directed

M&L for preparation of old plastered surfaces and applying one coat of cement base paint on walls complete all as specified & directed .

M&L one coat oil bound distemper on old plastered surface on wall including preparation of surfaces complete and all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar complete and all as specified and directed

S&F pre-polished Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) over and including 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete and all as specified and directed

Dismantling wall panelling or ceiling boards of any descripton any thickness & at any height complete all as specified and directed.

Dismantling grid work of any description as of false ceiling at any height complete all as specified and directed.

M & L for powder coated GI grid frame work for false ceiling of size 605x605mm, the snap grid shall be of aluminium main & cross tee of size 36.5x25x1.4mm (weighing 0.24 Kg/RM) and angle of size 23.5x26.4x1.4mm (weighing 0.191 Kg/RM) fixed to wall with rawl plug and stainless steel screw 50mm 450mm c/c and tied with and incl 4 mm dia suspension wire MS @ 1200mm C/C complete and all as specified and directed

M & L for providing 12mm thick Gypsum board 60x60cm in size fixed in ceiling (aluminium snap grid work) with screws as per manufacturer instructions and applying two coats of oil bound distemper over a coat of primer complete

Demolition of reinforced cement concrete in of any description and in any position not otherwise provided for complete

M &L providing precast cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate and set in cement mortar (1:4) in win- dow or door cills, lintels etc. (of any section indicated), with plain fair faces, including cham?fers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified

M&L for TMT 10 mm dia & over, cut to length bent to shape required including cranking , binding spirally for hooping for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia all as specified

M&L TMT bars 6 to 8 mm dia cut to length bent to shape required including cranking , binding spirally for hooping for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm as in stirrups spacers and binders

Dismantiling of AC sheet (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

M&L regular modified polyeser colour coated galvanised steel rib profile sheet (TCT) 0.50 mm thick E 42 (inclusive of protective coating) having total mass coating og 150 gms/sqm on both side as per IS-14246:95 (JIS:3312polyester coating 30-40 micron)of any colour having tensile strenth of 550 Mpa as in roof covering/ clading to wall fixed with on iron/ wooden members with self drilling zink allunium coated metal screws of suitable size having cap with rubber washers comlete all as specified and as directed.

M&L regular modified polyeser colour coated galvanised steel plain sheet (TCT) 0.50 mm thick E 42 (inclusive of protective coating) as in ridge, velly gutter having total mass coating og 150 gms/sqm on both side as per IS-14246:95 (JIS:3312polyester coating 30-40 micron)of any colour having tensile strenth of 550 Mpa as in roof covering/ clading to wall fixed with on iron/ wooden members with self drilling zink allunium coated metal screws of suitable size having cap with rubber washers comlete all as specified and as directed.

S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 comlete all as specified and as directed.

Dismantiling of CGI / PGI sheets any thickness as in roof coverings complete all as specified and directed.

S & F 1.00 mm thick PGI sheeting of class-VIII as in valley gutters, wall cladding and straight flashings etc ,fixed with 'L' type or 'J'type or crancked hook bolt and washers sealed the joint of valley gutter with comercial bitumen 80/85 grade complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position in un framed work complete all as specified and dorected.

S & F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed at site.

M &L preparation of new untreated steel and iron surfaces of any description not exc 10 cm width or girth when unconnected with other painting or when painted in a different tint and applying two coat of synthetic enamel paint over a coat of red oxide primerr.Surfaces of any description, n.exc 10cm in width or girth when uncon?nected with other painting or when painted in a different tint comlete all as specified and as directed.

Dewatering of soak well, septic tanks by using mechanical pump diesel driven with fuel operator and crew of water etc at site all as specified and directed.(Note - size of tank upto water lable shall be measured).

Cleaning of soak well, septic tank by way of desludging foreign material manually / mechanically and removal of sludge/silt/liquid mud sand (in foul conditions) etc, and disposed off outside of MOD premises (at the location notified by the local Municipal Corporation / Cantt board as per rules of public health, STP plants in the areas of AGE E/M Hosp Lucknow), including digging required nos of pits for depositing sludge and future capping the pit with the 25 cm thick layer of soil and sprinkling bleaching powder ( including supply of bleaching powder) over the area of ditches with one metre around complete all as specified and directed.(Note - size of tank/well upto water lable shall be measured).

Cleaning of blockage of sewer lines of any sizes/ dia of sewer line (i.e. branch sewer line, main sewer line) by way of cleaning desludging foreign material as well as roding of sewer line between successive manholes manually/mechanically or pumping out sewage from blocked line including desludging where required and ordered by Engineer-in-Charge and keeping sewer line functional from Ist manhole upto final drop as septic tank, soakage well all as specified and directed . Note 1.The cleaning shall be carried out with mechanized operation by means of diesel / electric operated vehicle mounted hydraulic operated high pressure suction -cum -jetting machines fitted with pump of required capacity and the sludge sucked out with Super Succer Machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site land at any distance and without any additional cost. 2. The sludge deposited in sewage line shall be fully cleaned and disposed off the same outside the MOD land at any distance and without any additional cost , on the same day when it was taken out.The job shall be carried out with safety precaution equipment and with strict supervision . 3. During the mechaized operation , the service provider /Contractor shall be equiped with Gas monitor , nylon rope ladder , torch light and compressor blower etc along with the sewage cleaning truck mounted suction / jetting machine . 4. The unit rate quoted by the contractor shall interalia deemed into the cost of providing skilled driver and operator and supervising engineer including provision of water for jetting & removal of sludge /silt /liquid /mud & sand (in foul position )etc. 5. The contractor shall engage the above mentioned T & P and intimate to Enginner - In -Charge in writing with Machine No./ Vehicle No. etc for their record and prior approval . 6. A Register shall be maintained by contractor showing the Machine No /Vehicle No. and their deployment at site mentioning time and date duly sighned by concern JE , Engr -in- charge and contractor and the same register shall be produced while claiming the payment by the tenderer .

Cleaning of all manholes upto 1.5 meter depth of any size and removal of sludge/silt/liquid mud sand (in foul conditions) etc, and disposed off out of MOD premises (at the location notified by the local Municipal Corporation/Cantt board) (as per rules of public health), including digging required nos of pits for depositing sludge and furture capping the pit with the 25 cm thick layer of soil and sprinkling powder ( including supply of bleaching powder) over the area of ditches with one metre around complete all as specified and directed.

Cleaning of all manholes upto 3.00 meter depth of any size and removal of sludge/silt/liquid mud sand (in foul conditions) etc, and disposed off out of MOD premises (at the location notified by the local Municipal Corporation/Cantt board) (as per rules of public health), including digging required nos of pits for depositing sludge and furture capping the pit with the 25 cm thick layer of soil and sprinkling powder ( including supply of bleaching powder) over the area of ditches with one metre around complete all as specified and directed

M&L for 150 mm reinforced concrete pipes, class NP2, laid and jointed complete with collars including jointing with cement joints with PCC bed and haunching with PCC 1:4:8 type D-2 using 40mm graded stone aggregate for 150mm bore NP2 pipe line including excavation and earth work and returning, filling in trenches and removal of soil upto 1.5m, including taking up broken sewage pipe line , complete all as specified and directed.

M&L for 200 mm reinforced concrete pipes, class NP2, laid and jointed complete with collars including jointing with cement joints with PCC bed and haunching with PCC 1:4:8 type D-2 using 40mm graded stone aggregate for 200mm bore NP2 pipe line including excavation and earth work and returning, filling in trenches and removal of soil upto 1.5m, including taking up broken sewage pipe line , complete all as specified and directed.

S&F for SGSW pipe of 150mm bore including jointing with cement joints with PCC bed and haunching with PCC 1:4:8 type D-2 using 40mm graded stone aggregate for 150mm bore SWG pipe line including excavation and earth work and returning, filling in trenches and removal of soil upto 1.5m, including taking up broken sewage pipe line complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete.

Excavation in trenches (soft/loose soil) not exc 1.5 m wide and not exc 1.5 m depth for foundation for mainholes, shafts etc 2. exc 10 sqm on plan area and n.exc 1.5 m in depth and getting out etc all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil.

Removing excavated material n .exc 50 m and depositing, where directed at a level n. exc 1.5m above the starting point complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete as sub base of floor complete all as specified and as directed.

M&L Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floor with grey cement and pigment incl 15 mm thick screed bed in CM (1:6) etc all as specified and directed.

M/S AMARJIT SINGH