Construction of RCC slab on Lift machine room floor and necessary civil works for SITC of 1 Nos 13 person capacity passenger lift at Telephone Bhavan Kolhapur

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : a) 1:1½:3 (1 cement : 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for all heights: Suspended floors, roofs, landings, balconies and access platform.

Edges of slabs and breaks in floors and walls.

Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12mm thick.

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).i) Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)

Encasing rolled steel sections, in beams and columns, with cement concrete 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), including centering and shuttering complete but , excluding cost of reinforcement.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.

Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

a) Granite of any colour and shade

i) Area of slab upto 0.50 sqm

ii) Area of slab over 0.50 sqm

Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. a) Granite work.

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : a) 100x58x1.90 mm

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : a) 300x16 mm

Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows, of approved quality with necessary stainless steel screws etc. as per direction of Engineer-in-charge. a) 250 x 19 x 1.9 mm

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

15 mm cement plaster on rough side of single or half brick wall of mix : a) 1:6 (1 cement: 6 coarse sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. a) New work (two or more coats) over and including water thinnable priming coat with cement primer.

White washing with lime to give an even shade : a) New work (three or more coats)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : a) With cement mortar 1:4 (1cement: 4 coarse sand).

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/rubbish to the nearest municipal dumping ground. a) For door/ window/ clerestory window.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. a) In cement mortar

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. a) For thickness of tiles 10 mm to 25 mm

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.

Dismantling granite tiles wall lining including removing cement plaster and disposal of dismantled material within 50 metres lead.

Mobilizing (including returning ) welding plant/equipment to the work site for welding/cutting etc., for carrying out repair works (NOTE: Mobilization charges to be paid once only to carry out all connected repairs in the same compound as one job/each).

Dismantling cutting and removing chequered plates angles, channels by using cutter machine / gas cutter machine and making small pieces to carry and transportation of the material to ground floor including stacking the same neatly within the premises as directed by Engineer in charge. (Rate is inclusive of all necessary safety precautions of labours and equipments etc. Throwing of material from terrace is not allowed and can attract panalty)

Providing and fixing double scaffolding system on the exterior side, up to 15 m height made with 50 mm dia Bamboos 1.5 m centre to centre, horizontal & vertical bamboo binding with kathhas in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc.complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

Removing aluminium partition including dismembering of all members like aluminium sections,glazing clips, particle board, glass, grills, etc. and stacking of serviceable material and disposal of unserviceable material within 50 metres lead as directed by Engineer in charge.(The serviceable material shall be handed over to BSNL authorities)

Refixing aluminium partition with available materials including transporting of aluminium pipes, door bottom, glazing clips, channels, glass, boards, etc. at required location and floor as directed by Engineer in Charge.

Providing EPDM rubber /Neoprene gasket beading for glazing in aluminium partition/door all complete as directed by Engineer - in - Charge.

Removing & Refixing of aluminium door shutter in aluminium frame with necessary screws etc complete,as per direction of Engineer in charge.)

Transportation of Aluminium dismantled material from CTO/Civil Division to Telephone Bhavan, Tarabai Park, Kolhapur at 2nd floor ( E10B room)i/c loading and unloading etc, complete.

Credit for dilapated/damaged material received from dismantlement.