Supply of cIVIL Lab items

Supply of Civil Deparment Equipment NOC Items

Slump cone apparatus Mould dimensions: (metal) Bottom diameter: 20cm Top diameter : 10 cm Height : 30 cm Metal of atleast 1.6mm thickness Tamping rod = 16mm diameter 600mm long

Compaction factor apparatus  Two conical hoppers  Cylinder mounted on a rigid metal frame.  The lowest openings of the hoopers are to be fitted with hinged trap doors. Tamping bar – 60 cm long 16mm diameter

Concrete cube mould 150mm x 150mm x 150mm Cube mould size : 15cm Cube mould type : 7 to 7.5 kg weight

Concrete cube mould 100mm x 100mm x 100mm Cube mould size : 10cm Cube mould type : As per IS

Vee-Bee Consistometer  Vibrating table size 380mm long and 260mm wide.  Elastic support height of about 305mm. Start/Stop switch and plug.

Standard test sieves 200mm diameter, seamless brass frame.(with sieve shaker)  20 cm diameter  Joint less brass frame  Should be made out of rolled brass. Sieve Set contains 4.75mm, 2.36mm, 1.18mm, 600 Microns, 425 Microns, 300 Microns, 150 Microns, 90 Microns, 75 Microns and Lid – pan.

Digital Weighing Balance Weight balance – digital upto 10 kg capacity with 1 gm accuracy.

Flakiness Index (Thickness gauge) THICKNESS GAUGE:  Frame with sliding panel to be provided.  Complaince with IS :2386(Part –I)  Slots of different standard length and width accurately cut to be provided.

Elongation Index ( Length Gauge) LENGTH GAUGE:  Hard wood base with vertically mounted metal, studs, eight metal studs are to be provided.  Aggregate to be classified as 63 to 6.3mm

Angularity number of coarse aggregate Angularity No of coarse aggregate:  Consists of metal cylinder (3L), Metal scoop and tamping rod

Concrete Mixing Tray  G.I. concrete mixing tray- 1m x 1m x 50mm  Sheet thickness – 1mm

Vicat apparatus Consist of a metallic frame bearing a movable rod with cap at one end and a vicat mould 80mm in dia at the base, 50mm at the top and 40mm high and with a glass base plate consistency plunger, initial and final setting needles in a nice jewellery case. With dashpot to facilitate the gentle lowering of the needle.

Blaine Permeability apparatus  Standard permeability cell made of brass, 12.7mm inside diameter with one perforated metal disc and one plunger.  A U-tube glass manometer with rubber coupling for permeability cell, mounted on a wooden stand.  Latex rubber tubing, 30cm long  100ml Dibutylphthalate liquid Suction Bulb

Sieve Set for coarse aggregate( (made of brass 200mm dia complete set) IS Sieve of size 80mm, 63mm, 50mm, 40mm, 31.5mm, 25mm, 20mm, 16mm, 12.5mm , 10mm , 6.3mm, pan and lid

Measuring Jar Plastic – 1000ml Transparent, Polypropylene

Measuring Jar Plastic – 500ml Transparent, Polypropylene

Measuring Jar Plastic – 100ml Transparent, Polypropylene

Trowels(Large size) Karni Large size

Trowels(Medium size) Karni Medium size 6cm trowel

Trowels (Small size) Karni Small size

Stop Watch High quality excellent performance. Stopwatch 1/100 Second. Time disply

Digital Weighing Balance (1000g capacity) Weight balance –digital upto 1000g capacity with 10 mg accuracy.

RAJHANS IMPEX

PARAMOUNT INDUSTRIES