PROVN OF APPROACH PATH TO OR MD ACCN AND RETAINING WALL TO OTM ACCN AT MIL STN NAHAN UNDER GE CHANDIGARH.

Amount

Excavation over area n.exc 1.5m deep and getting out in hard/dense soil all as specified and as directed.

Returning and filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick using hard soil all as specified and as directed.

Removing excavated material exc. 50 m but n exc. 500 m and depositing where directed all as specified and as directed.

Machine pressed precast conctete coloured interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade all as specified and as directed.

M&L for Reinforced cement concrete (Design Mix) M-25 (20mm graded aggregates) as in foundations, including rafts footings, foundation beams, plinth beams, bases for columns etc basement slabs under reamed piles and mass concrete all as specified

M&L for Reinforced cement concrete (Design Mix) M-25 (20mm graded aggregates) as in wall, Retailing walls, basement walls, ballast walls and like any thickness, above top of footing including attached pilaster and buttresses all as specified.

Form work to sides of concrete footing , bases of column etc and to batter rough finished surfaces of concrete all as specified and as directed.

Form work to faces of wall, retaining wall, abutments and similar work to batter rough finished surfaces of concrete comp all as specified

S&F 110mm PVC (SWR) Pipes single socketed in any length with rubber joints , laid in trenches or in floor comp all as specified

M & L Rendering 15 mm thick cement plaster in CM (1:4) on brick or concrete surface, finished even and smooth without using extra cement all as specified and as directed.

Sand filling under floors or in foundations including watering and consolidation all as specified and as directed.

PCC 1:2:4 type B-1, using 20 mm graded crushed stone aggregate for concrete as in kerbs or mud stops,coping, drain etc rounded or chamfered etc. complete all as specified and as directed.

PCC 1:2:4 type B-2, using 40 mm graded crushed stone aggregate for concrete as in foundations,filling and mass concrete for retaining walls,ports haunching and bedding etc. complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonary, built in cement mortar including quoins arches, pillers etc, but excluding ashlar facings, dressed stone work and precast concrete article built in cement mortar or cement lime mortar all as specified and as directed.

M&L for 100 mm thick cement concrete type D-2, 1:3:6 using 40mm graded stone aggregate as in plinth protection, finishing the cement concrete surface even and smooth without using extra cement all as specified and as directed.

TMT bars 10mm dia and over cut to length , bent to shape required including , cranking hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete.

M&L stone walling built in CM 1:6 of random rubble uncoursed, well bonded, dolidly hearted built in retaining walls, abutment and sililar work but except stone. (Stone received from item No 14 above)

M&L stone walling built in CM 1:6 of random rubble uncoursed, well bonded, solidly hearted built in retaining walls, abutment and sililar work all as specified and as directed.

M & L Flush pointing to random rubble, uncoursed or brought up to coursed CM 1:4 all as specified and as directed.

M & L Brick work with subclass B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified and as directed.

Forming embankments including raising (or lowering) earth spreading in layer n exc 30cm thick watering, ramming/rolling and finishin to requried size shape etc n exc 1.5m high from the base

All asper item No 21 above but exc 1.50m n exc 3.00m high from the base all as specified and as directed.

Hard core of gauge n exc 63 mm, deposited, spread and levelled all as specified and as directed.

M&L broken stone or boulders hand packing (any thckness) at back of walls over arches etc and raising/lowering to the required level all as specified and as directed.

M&L rough excavation over areas n exc 1.5m deep and getting out in any type of soil all as specified and as directed.

M&L for 300 mm dia RCC pipe,class NP-2 laid and jointed complete with collars all as specified and as directed.

Excavation in trenches, n.exc 1.5m wide and n exc 1.5m in depth for foundation etc or for shafts,wells,manholes etc and getting out in hard/dense soil all as specified and as directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for Preparation & painting the new steel surfaces over 10 cm in width or girth with two coats of synthetic enamel paint over one coat of primer

S&F GI tank covers with spikes over it to avoid monkey menace for proper fitment to tanks of 500 Ltrs and 100 Ltrs

Taking up or down steel water tubing 15mm bore and connections, including cleaning for re-fixing

Taking up or down old GI tubing and connections for 20mm bore

S&F 15 mm GI tubes medium grade with all fittings & fixed complete to walls or ceilings or laid in floors.

S&F 20 mm GI tubes medium grade with all fittings & fixed complete to walls or ceilings or laid in floors.

S&F 20mm gun metal, globe or gate valves with iron wheel head screwed both ends for iron pipe

S&F 15mm gun metal, globe or gate valves with iron wheel head screwed both ends for iron pipe

Disconnecting existing tanks , setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconneecting and refixing in position (Cleaning repairing etc measured separately) exc 250 & n.exc 500 ltr in capacity complete all as specified

Disconnecting existing tanks , setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconneecting and refixing in position (Cleaning repairing etc measured separately) exc 500 & n.exc 1000 ltr in capacity complete all as specified

15mm dia Ball brass valves high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

Rendering 15 mm thick on brick work or concrete surfaces, finished even and smooth without using extra cement on walls in cement mortar 1:6, in patches complete all as specified and as directed by Engr-in-Charge

M&L for preparing new plastered surfaces and applying two coats of cement based paint on concrete /plastered surfaces,

M&L PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, etc.

Black Granite stone ,20 mm thick as in kitchen platform incl rounding or bullnosing the exposed edges over 15 mm thick screed in CM 1:3

Black Granite stone 20 mm thick as in kitchen cabinet shelves, cupboards shelves to be fixed over wooden or mild steel support complete all as specified and as directed

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for incl cutting of reinforcement as required to facilitate demolition

Brick work with sub class 'B' bricks straight or curved on plan of any radius built in CM (1:4) with old size bricks half brick walls all as specified.

M&L RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in slabs supported on walls, roofs, landings, shelves and the like

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works etc not exc 200mm thick, horizontal or sloping for rough finished surfaces of concrete

M&L Rendering 10 mm thick cement plaster in CM (1:3) on ceiling surfaces finished and smooth without using extra cement.

M&L Glazed ceramic coloured tiles 450x300x6-7mm thick in vertical surfaces such as skirting,dados and risers to steps over and including 10mm thick in CM (1:4).

M/S SHANTI SARUP DINESH CHAND

AAR PEE ENTERPRISES

His Construction Company