Construction of New Ration Shop Building at D2 D2 (Kennadi Hospiatl Campus inside )in ward -44.

Amount

Charges for putting bore hole of size 23 cm of pile foundation up to hard stage of sand clay other bulb rate to fix all labour charges for boxing hire charges for boring set and all other T&P employed etc, complete.

Earth work excavation for foundation in Hard stiffclay, stiff black cotton, hard red earth, shales murram,gravel,stoney earth and earth mixed with small sizeboulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil,sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc., complete 10 cum. The Rate inclusive of all charges such as Earth work and remove the same away from the site etc, complete as per standard specifications. SI.NO.05

Sand filling for fountations & basement in layers of not more than15cm.thick well rammed watered and compacted etc., complete complying with standard specification.

Cement concrete 1:4:8 (one cement four sand and eight aggregates) Using 40mm gauge hard broken granite jelly for foundation inc. consolidation and dewatering for foundation wherever necessary etc.complete.

Brick work in CM 1:3 (one cement & five sand) using III class country bricks of size 8 3/4"X41/4"X 2 1/4 " including finishing, curing, etc., complete complyingwith standard specification - 100CFT (For foundation & basement)

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X23/4" including finishing, curing, etc.,complete complying with standard specification - 100CFT (For G.F.)

Supplying and erecting shuttering with necessary supports for plith beam with all cross brancings etc..,complete(Rcc coloumn footing plinth beam and lintel sides) Si No.82

Supplying, erecting with necessary supports for plain surface such as RCC Boxing side slab and silmilar RCC slab with all cross bracing etc., complete in all floors of any height ( the retrived materials ) should be taken back by the contractor the payment for cenetering shall be given after the concrete is laid ( Vertical portion ) 10m² etc., complete..Si No.325

Supplying, erecting STEEL CENTERING for sides and soffits inc supports and strutting for plain surface such an reinforced cement concrete slasp rectangualar beams tee or el beams lintels , bed blocks staircase in all floors of any height (the retrived materials should be taken back by the contractor) the payment for cenetering shall be given by the concrete is laid.SI No.307

Reinforced cement concrete 1:1 1/2 :3 (One cement One and half sand and three aggregate) using 20mm machine broken gauge bard granite jelly for RCC worksthe rate excluding the cost of reinforcement grills,centering and shuttering etc., complete in F&B

Supplying fabricating and placing in position of MS grills for reinforcement rate inc. the cost of steel for all works (the rate to include cost of binding wire also). Below 16mm Dia

Plastering with CM1:5(one cement and five sand) 12mm thick10m2.

Plastering with CM1:3(one cement and three sand) 12mm thick10m2.

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Finishing the top of floor with Granolithic Finish with CC 1: 2: 4 (one cement, two sand & four HBG jelly) using chips of grade 10 mm and below for 25mm thickness and rubbed smooth etc, complete as per standard specification (20 mm Thick)

Supply andand Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangemets using 20mm squre MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles,plates,sheets,fabrication charges, cost of hold fast and transportation charges etc.,complete Fully Panelled Double Leaf-Door Size- (1.00m x 2.10 m)

Fully Panelled Single Leaf-Door Size- (0.90m x 2.10 m)

Fully Panelled Single Leaf-Door Size- (0.75m x 2.10 m)

Ventilator (0.45 x 0.60m)

Fully panelled Double leaf - Window (without Ventilator) (1.20m x 0.90 m)

Labour charges for over head wiring from EB pole to pumproom by fixing 32mm dia GI pipe to the required height over roof slab of pumproom and as directed by EB authorities including fixing M.S. clamp set, U.Kondi, 7/20 GI wire, 7/20 PVC insulated copper wire reels, T.W. meter board, aerial board, earth plate GI Bolt of nuts, PVC Hose fuse wiring etc. complete

Wiring with 2x1.50 sq.mm PVC unheated SC Aluminium cable of 1100 V grade in suitable PVC rigid pipes in wall or ceiling with PVC accessories with TW switch box in flush with wall covered by hylum sheet3mm thick and painting with suitable colour of 14 SWG TC wire for light point.

Supplying and fixing of 48” AC ceiling fan with 300mm down rod on the existing clamp with regulator with complete set TWAD-DATA-P- 56" Ceiling Fan High Speed (Without regulator) Higher End Each

Supply and Fixing for 20W 4 Feet LED fitting with LED including labour Charges Etc Complete

White washing two coats with best lime stone including gum and cungee water etc. complete 10m2 SI No.338 rate for 10m2.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat , including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc,complete as per standard specification. - 10 sq.m

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by usingminute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and makingornamental designs as per the site condition and asdirected by the departmental officers.

Add GST 18%

M MAHESHKANNAN (BID ID -1223559)