REPAIR / MAINT OF STREET LIGHTS OF INTERNAL ROADS AND SECURITY LIGHTS OF OUTER FENCE, UNITS AT LGJ MIL STN

Amount

Checking of street light fittings any type like CFL , MV lamp fitting, SV lamp fitting, metal halide fitting, focous/flood light, high mast light, LED lights etc. fixed on pole/wall to find out defects/taking out unserviceable parts such as LED Driver, SPD, lamp holder / bipin holder etc. and repairing by changing the defective part(s) including minor repair to cable connection / loose connection/necessary cleaning the bowl/perpex cover where provided and testing complete all as specified and as directed by Engineer-in-charge. Note :- (i) Parts such as lamp/ porcelain lamp holder / bipin holder, LED driver/new LEDc lights etc. shall be measured and paid separately under appropriate item of this BOQ as supply only. (ii) The T & P, ladder and vehicles etc. will be arranged by the contractor and the cost deemed to be included in the quoted rates.

S&F in replacement Integral LED street light luminaire white light comprising of epoxy powder coated housing, enclosed with glass cover in frame 45 W not less than 100 lumens per watt AC 230 Volt supply (white Glass) suitable for 40/50 mm OD entry for direct mounting on pipe bracket with all electrical accessories wired up to the terminal block suitable for mounted on bracket / poles / walls complete all as specified and directed by the Engr-in-Charge.

S&F in replacement Integral LED street light luminaire white light comprising of epoxy powder coated housing, enclosed with glass cover in frame 60 W not less than 100 lumens per watt AC 230 Volt supply (white Glass) suitable for 40/50 mm OD entry for direct mounting on pipe bracket with all electrical accessories wired up to the terminal block suitable for mounted on bracket / poles / walls complete all as specified and directed by the Engr-in-Charge.

S&F flood light fitting powder coated pressure die cast aluminium housing with mirror optic reflector toughened glass cover with high power LED 120 watt 240 volt 50Hz and unique peanut lens with optics for uniform distribution with SMPS complete with driver and LED connectors prewired complete including taking down old unserviceable one complete all as specified and directed by Engr-in-Charge.

M&L for post top 40 watt made in cast aluminium spigot housing with decorative clear opal acrylic and IP 65 protection complete including fixing arrangement complete all as specified and directed by Engr-in-Charge. Make : Bajaj/Crompton/Havells

M&L for LED 9 watt Bollard integral decorative LED Bollard with Opal acrylic and IP65 protection complete including fixing arrangement complete all as specified and directed by Engr-in-Charge. Make : Bajaj/Crompton/Havells

S&F in replacement of 1100 volts grade heavy duty twin core cable PVC insulated sheathed aluminium stranded conductor of size 2.5 sqmm for connection purpose complete all as specified and directed by Engr-in-Charge.

S&F in repair analogue time switch 3 mode complete all as specified and directed by Engr-in-Charge. Make : L&T, C&S, Havells

S&F in repair power Contactor 40 Amp 415 Volt having AC Coil complete all as specified and directed by Engr-in-Charge. Make : L&T, C&S, Havells

S&F in replacement brackets made out of GI tubing light grade 40mm dia, 1.5 metre long bent to shape at 120 degree angle at half metre from bottom (as per sample), fixing on poles/walls for street light fitting including before fixing applying two coat of aluminium paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. Note : Clamps and nut bolts for fixing as required shall be measured and paid separately under appropriate item

Excavation in trenches not exc 1.5m wide and n. exc 1.5 deep in soft/loose soil for foundation/cable etc n. exc 10 sqm on plan and n. exc 1.5 Sqm in depth complete all as specified and directed by Engr-in-Charge.

Returning and filling including spreading levelling, watering and well ramming in layer n.exc 25cm thick complete all as specified and directed by Engr-in-Charge.

Removing surplus soil to a distance n.exc 50m and depositing where at level n.exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.

M&L sand cushioning with dry coarse sand to under ground cable 230mm deep (80mm below and 150mm above the cable) complete all as specified and directed by Engr-in-Charge.

M&L brick protection with sub class 'B' brick laid flat across the cable complete all as specified and directed by Engr-in-Charge.

Labour only for one layer of bricks sub class 'B' bricks (old brick reused obtained from the item taking out cable here-in-after) for cable protection cover laid flat and lay in trenches over the cable prependicular to the direction of cable complete all as specified and directed by Engr-in-Charge.

Supply, laying, jointing and testing in trenches or on poles walls XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade all as specified and directed of cross sectional 10 sqmmx2 core including taking down old u/s one complete all as specified and directed by Engr-in-Charge.

Supply, laying, jointing and testing in trenches or on poles walls XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade all as specified and directed of cross sectional 10 sqmmx 4 core including taking down old u/s one complete all as specified and directed by Engr-in-Charge.

Supply, laying, jointing and testing in trenches or on poles of LT cable 1100volts grade 16Sqmm, 4 core with stranded aluminium conductor PVC sheathed armoured confirming to IS 1556 laid in trenches/along poles/through duct complete all as specified and directed by Engr-in-Charge.

Supply, laying, jointing and testing in trenches or on poles of LT cable 1100volts grade 35 Sqmm, 3.5 core with stranded aluminium conductor PVC sheathed armoured confirming to IS 1556 laid in trenches/along poles/through duct complete all as specified and directed by Engr-in-Charge.

Supply, laying, jointing and testing in trenches or on poles of LT cable 1100volts grade 50 Sqmm, 3.5 core with stranded aluminium conductor PVC sheathed armoured confirming to IS 1556 laid in trenches/along poles/through duct complete all as specified and directed by Engr-in-Charge.

S&F in replacement LT cable juction box, dust and water proof (IP 65), out door type, made out of Polycarbonate with glass fiber re-inforced size of box 200x160x98mm with swiveling cover and locking clamp, pole mounting, consisting of aluminium bus bar strip 150mmx20mmx3mm, 4 Nos mounted on PVC insulator and provision of incoming/outing cables with grommets including in built 6Amp MCB, SP, 9/10KA one Nos complete all as specified and directed by Engr-in-Charge. Note : MS Clamps and nut bolts for fixing the box along pole shall be measured & paid separately under appropriate item of this Schedule)

M&L for pre-stressed cement concrete pole, 9 metre long cross section 102mmx152mm at top and 102mmx289mm at bottom class 10 complying with requirement of IS-1678-1998 including painting of pols with two coats of synthetic enamel paint over a coat of primer in alternate strip of 30 cm each in black and white colour upto 1.5 mtr height from top of PCC pedestal/copping of poles and numbering of poles with synthetic enamel paint white in 80mm high letters over 150mmx230mm black base from synthetic enamel paint and dismentling of old U/s pole and removing from site complete all as specified and directed by Engr-in-Charge. Note : Earth work and PCC work shall be measured and paid separately

S&F ACSR conductor of size as specified on LT/HT overhead line including all jumper connection and binding on insulator incl taking down old one complete all as specified and directed by Engr-in-Charge.

M&L for re-stretching of loose LT/HT overhead line, aluminium conductor, with the help of rope and puller etc complete all as specified and directed by Engr-in-Charge.

S&F galvanised steel wire 4mm dia for cradle hexagonal/rectangular or running straight incl taking down complete all as specified and directed by Engr-in-Charge.

S&F pin type, porcelain, vetreous, brown insulator including one galvanised mild steel spindle, two galvanised iron washer and one galvanised iron nut, 65mm dia and 100 mm height for 1100 volts grade incl taking down complete all as specified and directed by Engr-in-Charge.

S&F shackle type porcelain vitreous white brown green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts, 90mm dia and 75mm height having GI straps 31x3mm and for 12mm dia bolt for 1100 volts grade incl taking down complete all as specified and directed by Engr-in-Charge.

M&L for trimming of branches of trees touching LT electric over head line as one length span n. exc 50 mtr comprising of conductor n. exc 6 Nos and making clear about 3 mtr in radious and carrying and deposting where directed n. exc 50 Mtr complete all as specified and directed by Engr-in-Charge.

Supply and fix stay assembly complete with accessories as shown in electrical plate No 1 using stay rod 16mm dia, incl loop type insulator, stay clamps complete all as specified and directed by Engr-in- Charge Note : Excavation, earthwork and PCC in foundation shall be measured and paid seperatly under respective items of BOQ

S&F galvanised stay strand 7/3, 15mm complete all as specified and directed by Engr-in-Charge.

M&L for GI pipe 40mm size, medium grade laid in trenches/fixed to pole/wall for cable protection complete all as specified and directed by Engr-in-Charge.

Supply only in repair LED driver suitable for 25/45 watt 230 volt AC, PF>0.95 supply LED fitting complete all as specified and directed by Engr-in-Charge.

Supply only in repair LED driver suitable for 60 watt 230 volt AC, PF>0.95 supply LED fitting complete all as specified and directed by Engr-in-Charge.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregated) as in foundation for electric pole etc complete all as specified and directed by Engr-in-Charge.

M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggregated) as in coping for electric pole or for stay assy etc complete all as specified and directed by Engr-in-Charge.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

HARSH CONSTRUCTION CO.

DHAWAN CONSTRUCTION COMPANY

Soma Enterprises

Singla Electricals