Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.3 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹28.4 L+₹53,180 (1.91%)Rejected-Finance | L2 | Rejected-Finance BEING NOT LOWEST | |
| 3 | L3₹29.6 L+₹1.7 L (5.98%)Rejected-Finance FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L3 | Rejected-Finance BEING NOT LOWEST | |
| 4 | L4₹31.5 L+₹3.6 L (12.9%)Rejected-Finance 266 UTTAMNAGAR NDA ROAD PUNE 411023 | PUNE | MAHARASHTRA | 411023 | L4 | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
10 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D GIRINAGAR PUNE 411025
GE I R AND D GIRINAGAR PUNE 411025
ADDN ALTN INCLUDING RENOVATION OF OR BARRACK NO P 57 AT MILIT GIRINAGAR PUNE 411025
2023_MES_633885_1
GE I R AND D GNR TOKEN 84 OF 2023-2024
Open Tender
Civil Works
Works
GE I R AND D GIRINAGAR PUNE 411025
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE I R AND D GIRINAGAR PUNE 411025
₹66,000
Yes
27 Apr 2024
21 Dec 2023
12 Jan 2024
21 Dec 2023
10 Jan 2024
28 Dec 2023
21 Dec 2023 - 26 Dec 2023
Amount
(B&R WORKS) Complete removal of entire existing water proofing treatment in any position including tarfelt, Plaster, lean concrete of any thickness, gravels etc. and removing the debries out side MD land complete all as specified and directed.
M&L for 15 mm thick rendering in CM 1:3 over concrete surfaces mixed with liquid water proofing compound as per maufacturer's instructons in two layers in longitudinal & transverse directions finished even and smooth with cement slurry for applying chemical treatment by authorised professional applicators complete all as specified and directed. Note: Water Proofing compound shall be measured and paid for separately as "Supply Only"
Supply only liquid water proofing compound for roof and sunken floor complete all as specified and directed.
M&L for Cutting grooves in brick wall, 75 mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.
M&L Acrylic emulsion polymer of acrylic single component low viscosity polymer for preventing leakages over exisitng/New surface of slab, terrace, exterior, interior wall, Chajjas etc all as specified and directed as per following procedure :- (a) Surface & surface preparation : Remove all the loose particles , dirt & dust clean by water , wire brush & mechanical cleaning , grease & oil should be cleaned using solvents, If the surface is previously coated with tar, it should be thoroughtly scraped off. The surface should be dry before application . All the cracks and crevices in the concrete slab to be filled with polyurethene based sealent with and including application of PU based primer all as directed by Engr-in-Charge. (b) Finish paint : Apply water based polyurethenene modified dispersion (single component cold applied ,non toxic,VOC complaint)in 03 coats icluding 01 coat of primer of same materials after dillution of water at 50 % or specific primer matching same material as per manufacturers specificationand as dircted by EIC/GE Make:-Bostic,Berger,Fosroc,Sika,Asian,or any other make approved by E-in-C'sBranch for PU based water proofing treatment.
Dismantling structural steel work including doors, gates nut excluding framed truss complete all as specified and directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness including Nainital or Similar pattern roof coverings complete all as specified and directed.
S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified complete all as specified and directed.
M&L for mild steel framed work such as grills, gratings etc. with ends of bars shouldered or riveted or gorged into spikes framed guard bars barred to windows, iron door, ladders framed balusters, walk ways, railing, frame work for water tank and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
Demoltion of cement concrete in ground floor and paving n exc 15 cm thickness below and above ground level and as in floor complete all as specified and directed.
M & L for PCC 1:4:8 type D-2 (using 40 mm aggregate stone aggregate) as in foundation bed concerete and mass filling complete all as specified and directed.
M&l for rendering 10 mm thick in CM (1:4) using water proofing compound as per manufacturer instruction as in sunken floor complete all as directed by Engr-in-Charge. Note : Water proofing compound will be measured and paid separately as supply only.
Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work in cm 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.
M&L for two coats of OBD over a coat of primer & 2mm thick wall care putty finishing including preparation of new surfaces on walls complete all as specified and directed.
M&L for two coats of white wash including preparation of new surfaces as on cielings complete all as specified and directed.
M & L for complete removal or existing wall treatment and applying two coat of OBD with a coat of primer finishing on old surfaces etc complete complete all as specified and directed.
M & L for preparing old surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M & L for one coat of cement base paint on exterior old surfaces including preparing old surfaces etc complete all as specified and directed.
Dismantling of wall dado / floor tiles Incl floor hearth & removal of debries complete all as specified and directed.
M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and over 20 mm thick screed bed in CM 1:6 complete all as directed by Engr-in-Charge.
M&L for glazed ceramic coloured tiles 350x450x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match with and over 10 mm thick backing coat in CM 1:4 complete all as directed by Engr-in-Charge.
Dismantling stone slabs/tiles of any description ot thickness in floors laid bedded and pointed in any mortar complete all as specified and directed.
M&L for PCC1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection of average 75mm thick, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in flooring of average 75mm thick complete all as specified and directed by Engr-In-Charge
M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in flooring of average 40 mm thick complete all as specified and directed by Engr-In-Charge
M&L Machine cut kota stone slab flooring 20-25mm thick with and over 20mm thick screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in staircase steps etc complete all as specified and directed.
M&L for machine cut cudappah stone slab 20 to 25 mm thick with and over cement 20 mm thick screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab indluding rubbing and polishing including making hole in platform for gas pipe complete all as specified and directed.
Rounding to edges of stone slabs one edge such as in steps, cooking platform and other similar works etc. complete all as specified and directed.
S & F 16-18 mm thick granite stones slabs table rubbed and polished in jamb ,steps , window cill ,cooking platform etc wih and over 15 mm thick screed bed in CM 1:4 including pointing in white cement 1:2 using marble dust and admixture of pigment to match the shade complete all as specified and directed.
M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m radius built in CM 1:6 complete all as specified and directed
Taking up or down steel tubing of 20 mm dia and connections including removal to store complete all as specified and directed.
Taking up or down steel tubing of 15 mm dia and connections including removal to store complete all as specified and directed.
S&F HDPE pipes of pressure rating 6kgf/sqcm of 40 mm dia fixed/concealed on walls or floors complete all as specified and directed.
S&F 15 mm dia 45 cm long PVC water connection with PTMT nuts and washers complete all as specified and directed.
S&F GI pipe medium grade 15 mm dia with and including all fitting laid in floor or fixed in walls complete all as specified and directed.
S&F GI pipe medium grade 20 mm dia with and including all fitting laid in floor or fixed in walls complete all as specified and directed.
S&F vitreous china wash down water closet pan(pedestal pattern) white with fixing bolt ,10 ltrs PVC valveless , syphonic action type low level flushing cistern with inlet , ball valve, float & handle , plastic water closet seat cover, closed pattern with flat bottom and mildsteel chromium plated, hinging device etc complete fixed in repairs complete all as specified and directed.
S&F vitreous china squatting pan Orissa pattern size 580 x 440mm white with integral foot rests fixing bolt ,10 ltrs PVC valveless , syphonic action type low level flushing cistern with inlet, ball valve, float & handle etc complete fixed in repairs complete all as specified and directed.
S&F in repairs vitreous china urinal, half stall type white with polyethylene flush pipe 32mm dia ,automatic push button , waste pipe and along with15mm dia bore urinal spreader etc complete all as specified and directed.
S&F in repair Soap dish ,vitreous china white, approximate size-160x160x90 mm, fixed with chromium plated brass screw complete all as specified and directed.
S&F Brass chromium plated shower rose 125mm size with or without swivel joints, anysize. including fixing to steel pipe or union complete all as specified and directed.
S&F in repairs Wash basin vitreous china oval type 550 X 440mm long white colour flat back including 15mm dia CP pilar cock ,PVC connection, waste pipe , CP waste coupling 32mm dia ,32 mm HDPE pipe one mtr and MS brackets etc and fixed on granite platform etc complete all as specified and directed.
S&F in repair stop valves cast copper alloy, screwed down high pressure fancy type chromium plated 20 mm dia complete all as specified and directed.
S&F in repair angle/stop valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) complete all as specified and directed.
S&F in repairs CP Bib taps 15 mm dia with crutch or butter fly handle fancy type complete all as specified and directed.
S&F in repairs Brass chromium plated Tubular towel rail 20mm dia 'D' type, 60cm long between flanges complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tanks 1000 lts (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part 1 including dismantling of existing damaged water tanks any type & size complete all as specified and directed.
S&F 25mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe in repair complete all as specified and directed.
S&F ball brass valves 20mm dia high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.
Taking down PVC (SWR) pipes of any size / pattern including fittings complete all as specified and directed.
M&L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement outlet dia 75mm in repair complete all as specified and directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm complete all as specified and directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm complete all as specified and directed.
S&F PVC(SWR) bends 110 mm dia with acces door complete all as specified and directed.
S&F PVC (SWR) bends 75 mm dia.with access door complete all as specified and directed.
S&F 125mm PVC (SWR) gully trap complete all as specified and directed.
S&F 75 mm PVC (SWR) floor trap multi grating complete all as specified and directed.
S&F PVC(SWR) junction double,(Single T),equal or unequal 75 mm dia complete all as specified and directed.
S&F PVC(SWR) junction double,(double T),equal or unequal 110 mm dia with access door complete all as specified and directed.
S&f PVC (SWR) vent cowl 110mm dia complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm each but n.exc. 4 sqm each complete all as specified and directed.
M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and directed.
S&F factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.
S & F 100 x 60mm size pressed steel frames for doors with one or more rebates incl necessary fixing luges, hinges, lock strike plates etc. complete all as specified and directed.
M&L for PCC (1:3:6) type C0 (using 12.5 mm graded stone aggregate) as in door frame filling and similar work filling complete all as specified and directed.
Supply and fixed flush shutters 35mm thick, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.
S&F 75 mm long butt hinges , medium weight, cold rolled mild steel complete all as specified and directed.
S/F 150mm size aluminium anodised handles, cast type complete all as specified and directed.
S/F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
M &L aluminum anodised sliding door bolt with hasp staple(bolt type) length 300mm fixed in repair complete all as specified and directed.
S & F Powder coating anodised aluminium window and ventilater frame shutters fixed type without sashbar incl necessary joining cleats, glazing clips rubber packing ,snap beading screws etc complete all as specified and directed. (Note : Alu sec weight not less than 0.55 Kg/Rm )
M&L for sheet glass ordinary quality 3 mm thick fitted with beading/putty n.exc 0.5 sqm each fixed complete all as specified and directed.
M&L for 2nd class hard wood plain fillets, square, rectangular in section wrought screwed with nails area exceeding 13 sqcm but not exceeding 25 sqcm complete all as specified and directed.
M&L for prelaminated particle board of 18/19 mm thick interior grade prelaminated on one side with decorative choice lamination & other side balancing white lamination fiixed with timber frame work of cupboards, book case etc complete all as specified and directed.
S&F Aluminium anodised tubular curtain rail with brackets complete all as specified and directed.
M&L for Two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces exc. 10 cm width or girth etc. complete all as specified & directed.
M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces exceeding 10cm girth or width complete all as specified and directed.
M&L for preparation of old painted wooden surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.
(E&M WORKS) Taking down carefully aluminium / copper point wiring complete (light, fan socket & power) including unserviceable fixtures and fittings such as switches ceilimg roses pendents regulators sockets light fittings etc complete removing material for taking credit & making good disturbed wall / floor etc complete all as directed by Engineer-in-Charge
Taking down sub main wiring complete including fitting and fixtures, removing materials for making good disturbed surfaces of walls, floors, roof etc, all as specified and as directed.
Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as directed.
M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through heavy duty PVC Caping Casing in walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly including concealed MS box with 3 mm thick laminated sheet cover fixed with brass screws and cup washers for mounting of plate mounting for housing the switches, socket outlets, fan regulators etc for one Light / Fan Point / Bell point controlled by one switch complete all as specified and as directed (a) One light point controlled by one way switch.
(b) One light point controlled by Two way switch.
(c) One Ceiling/Exhuast fan point controlled by one way switch.
(d) One 3 pin switch socket outlet point 5 Amps on independent board.
(e) One 3 pin switch socket outlet point 5 Amps on same board with other switch.
All as per item No. 86.00 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size.
S & Fix switch piano, flush type single pole, one way 5 Amps capacity complete all as specified and directed.
S & Fix switch piano, flush type single pole, two way 5 Amps capacity complete all as specified and directed.
S & Fix switch piano, flush type single pole, one way 15 Amps capacity complete all as specified and directed.
S & Fix socket out let 6A 2/3 on combined 2 module complete all as specified and directed.
S & Fix socket out let 6A/16A-2/3 pin combined 2 module complete all as specified and directed.
S & Fix Ceiling rose surface backlite 65x50mm, 3 terminals complete all as specified and directed.
S&Fix fan regulator electronic 2 modular type volts AC 50 HZ ,300 Watts,4 step complete all as directed.
S & Fix Regal Batten General purpose industrial compact batten suitable for single or twin LED Tubelight with integral LED driver, available in single / double side connection CRCA batten suitable for mount LED tube rod 1 x 18 watts including necessary electric connections 3 core 1 sqmm insulated copper wire from ceiling rose to tube light fitting complete all as specifed and directed by Engineer-in-charge. Make - Havells. REGALBATTENTor equivalent in Crompton/Wipro/Philips as approved
S & Fix Photon Ultra Plus 2.0 Tubelight <10% Ultra bright LED Tubelight (single side connection) with very high efficacy >=115 lm/W & THD<10% suited for installation in existing tubelight luminaire with G13 lamp holders to give glare free light with necessary fixing arrangement etc complete all as specifed and directed by Engineer-in-charge. Make-Havells:PHOTONULTRA or equivalent in Crompton/Wipro/Philips as approved.
S&F LED Tube light fitting 10 watt, 230 volts, sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work and retail spaces complete with all accessories all as specified & directed by Engr-in-Charge. Make. Make-Havells-ENDURALINEARNEO or eqvt in Crompton/Wipro/Philips as approved.
Supply and Fix of wall light fixture made up of Polycarbonate, suitable for 9 W LED lamp B22 base including suitable Bulb. Make: Havells Model: LHFOFUE or equivalent in Philips/Wipro/Crompton as approved.
Taking down the defective ceiling fan / Exhaust fan of any sweep and make after disconnecting electrically & mechanically and examine & carry out the servicing/overhauling the ceiling fan by thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of painting re-fixing, testing in all respect for smooth running complete.
Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers, including connected with 3 core 1.5 sq mm copper conductor cable from ceiling rose to exhaust fan all as specified and as directed Make : Havells/Crompton as approved.
Taking down the existing unserviceable Geyser and after disconnecting electrically & mechanically and examine & carry out the servicing/overhauling the geyser by thoroughly cleaning the tank, thermostat, heatingelement and LED Lamp indicator, testing in all respect for smooth running and refixing complete all as specified and directed.
S & Fix 30 Watts LED new generation energy saving and environmental friendly long life LED building light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 along with GI bend of suitable size. Make Havells : ENDURASUNDOWNS or equivalant Philips/Wipro /Crompton or equivalent as approved.
Supply and Fix 25 watts Gate light fitting New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source Make: Havells Model: CORALPT25WLED - IP65 or equivalent in Philips/Wipro/Crompton as approved.
Supply and Fix 8 W Bollard LED light New generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape luminaire for diffused lighting with high power LED as light source. Make: Havells Model: BAMBOOBL8WLED (0.5M) or equivalent in Philips/Wipro/Crompton as approved.
S&Fix MCB DB VTPN 8 ways,with metal double door, IP -43 protection suitable for MCCB as incommer and MCB as out going, VTPN DB's 415 volt 3 phase complete with appropriate size copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good distrubed wall/surface all as required at site Make : Legrand or eqvt make of ABB/Siemens as approved.
Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCCB) TPN of 40 A to 100 Amps current carrying capacity in the DB complete all as specified and directed.
S & Fix double door sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete.
S & Fix double door sheet metal enclosure distribution board SPN, 16 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete all as specified and directed.
S & Fix of MCB TPN, 240 volts, 40 to 100 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.
S & Fix of MCB single pole and neutral, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.
S & Fix of MCB single pole, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.
S & Fix sheet metal enclosure distribution board SPN DB's 2 way with MCB complete all as specified and directed.
S & Fix Metal plug and socket DB's with MCB 20A SP complete all as specified and directed.
M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC casing and capping with its accessories all as specified and directed by Engr-in -charge for the following :-
(a) 2x1.5 sq mm and 1x1.5 sq mm as earth wire complete all as specified and directed.
(b) 2x6.0 sq mm and 1x6 sq mm as earth wire complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed.
Supply, laying and testing PVC cable 3 Core, 2.5 sqmm electric power cables (heavy duty) 1100 Volts complete all as specified and directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out soft / loose soil for laying cables / pipes / erection of poles etc complete all as specified and directed.
Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
Returning filling in soil including spreading levelling watering well ramming in layers not exceeding 25 cm each.
Supply & Laying 50 mm outside dia double wall corrugated pipe (DWC) ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement complete all as specified and directed.
M & L for earthing complete with deep galvanised earth plate 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep bellow ground level with top edge of plate) not less than 1.5 m bellow normal ground level connected to GI earth wire 4mm dia by means of galvanised iron or steel all as shown in electrical plate No 3 connected to earth test point all as specified including testing on completion all as specified & directed. Note - (i) Quoted rate shall deemed to be inclusive of cost of excavation & earth work, PCC Pit, RCC 1:2:4 type B1 cover slab with TMT 8mm bar @ 150 C/c both ways cover, funnel, watering pipe ,test point complete (ii) Cost of earthing lead & protection pipe upto 7.5M shall deemed to be included in quoted rate.
sagar construction
OM GANESH CONSTRUCTION
J.G.Goel
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .