REPAIR TO FLOORING, SUNKEN FLOOR AND SANITARY FITTINGS OF TOILET AND BATHROOM IN CERTAIN BUILDINGS IN ZONE D AREA AT VSN, NAGPUR

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including floor finishes work and disposal of debris complete all as specified and as directed.

Demolition of Brickwork or stone /boulder masonry built in cement mortar complete all as specified and directed.

Taking down cement plaster on brick or stone wall,concrete, etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Taking up or down steel tubing of 15mm and connections, including cleaning for refixing complete all as specified and as directed

Taking up or down steel tubing of 20 mm and connections, including cleaning for refixing complete all as specified and as directed

M&L for Brickwork with fly ash Bricks , straight or curved in plan exc 6 m mean radius built in CM(1:6) complete all as specified and as directed.

M&L for Brickwork with fly ash Bricks ,straight or curved in plan to any radius in half brick thick wall in CM(1:6) complete all as specified and as directed

M&L Rendering 15mm thick on other than fair finish of bricks/concrete/stone surface of wall in CM (1:4) using WPC and finished the surface even and smooth without using extra cement (WPC to be mesuared and paid separately) complete all as specified and directed.

M&L Rendering 5mm thick on Ceiling in CM (1:3) finished the surface even and smooth without using extra cement. complete all as specified and directed.

M&L for 10mm thick Rendering in CM (1:4) on fair faces of brickwork or concrete surfaces complete all as specified and directed.

M &L for integral water proofing compound ISI Marked complete all as specified and directed.

M&L for providing 75mm thick PCC (1:3:6) type C2 using 40 mm graded aggregate as Plinth protection / Path finished the surface even & smooth with out using extra cement complete all as specified.

M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound complete all as specified.

M&L for water proofing treatment of sunken portion of toilet,cement mix with mastercrete-M-81 of CHOKSEY CHEMICALS (or equvilent product of other company) in the ratio of 2:1,two part of cement and one part of mastercrete-M-81 and applied in two coats @ 0.75 kg /sqm per coat all as specified and directed by Engr-in Charge

M&L for plain Cement concrete (1:2:4) type -B1 using 20mm graded aggregate, 50mm thick as in sunken floor, fair finish with using extra cement complete all as specified and directed.

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over and including 15 mm screed bed in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles all as specified and directed by Engr-in Charge all as specified and directed by Engr-in Charge

M&L Glazed Ceramic colour tiles in vertical surface of size 350x 250x 7 mm/ 450X 350X 7mm thick over and including Rendering 10mm thick CM 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour complete as specified and directed

Material and labour for Granite (of any type) work (table rubbed and polished) of 20mm thick in steps, jambs, pillars, window-cills, cooking platforms over Screed bed or bedding layer of mortar 15mm thick CM (1:4) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platform and like in cement in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite stone including grinding and polishing completeall as specified and directed by Engr-in-Charge.

M&L machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L rounding to edges of stone slabs on edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S&F GI Tubes, ‘medium grade’, galvanised, Concealed with all fitting 15mm including cutting of Stone , Concrete Block or Slab walls and making good complete as specified and directed

S&F GI Tubes, ‘medium grade’, galvanised, Concealed with all fitting 20 mm including cutting of Stone , Concrete Block or Slab walls and making good complete as specified and directed

Taking down of chowkats with shutters (without taking off shutters from the frame) n.exe 1.5 sqm each all as specified and directed.

S&F PVC Door frame of size 50 mm x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as specified and directed..

S&F Factory made solid panel PVC Door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails , lock rail & bottom on either side & as a gap insert for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement all as specified and as directed.

S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm complete all as specified and directed

S&F Extruded Aluminium bow handles of size150 mm complete all as specified and directed

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm size complete all as specified and directed

M & L for Preparation of old plastered ceiling surfaces with applying one coat of white wash complete all as specified and directed.

M & L for Preparation of old plastered wall surfaces applying one coat of white wash complete all as specified and directed.

M & L Preparation of old plastered wall surfaces applying one coat of distemper oil emulsion complete all as specified and directed

M & L Preparation of old plastered external wall surfaces applying one coat of cement base paint complete all as specified and directed

M & L for Preparation of old plastered ceiling surfaces applying one coat of distemper oil emulsion complete all as specified and directed.

M & L Preparation of Newly plastered wall surfaces by applying two coats of distemper oil emulsion over 1mm thick wall care putty complete all as specified and directed

M & L Preparation of Newly plastered external wall surfaces by applying two coats of cement base paint over a coat of primer and complete all as specified and directed

M & L Preparation of Newly plastered ceiling surfaces by applying two coats of two coats of distemper oil emulsion over 1mm thick wall care putty complete all as specified and directed.

M&L for Preperation of old painted surfaces, one coat of Synthetic Enamel paint over a coat of Red Oxide zinc chrome primer on steel surface over 10 cm girth including preparation of surface complete all as specified and as directed.

M & L preparation of surfaces thoroughly by cleaning, washing and removing dust, dirt, oil and loose particles and applying water proofing liquid Dr. Fixit Pidicrete URP in two coats as per manufacture instruction mix with cement complete all as specified and as directed.

M & L Preparation of old wall surfaces and applying 3 mm wall care putty complete all as specified and directed

Dismantling water tanks exc 500ltr but n exc 1000 ltrs complete all as specified and as directed.

Dismantling water tanks exc 250 ltr but n exc 500 ltrs complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S & F stop valve 15mm dia of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed

S& F Ball brass valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed

S & F PVC(SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F PVC(SWR) Bend 110mm bore complete all as specified and as directed.

S & F PVC(SWR) Tee 110mm bore complete all as specified and as directed.

S&F PVC (SWR) pipes, 75 mm bore, single socketed, in any length, with rubber ring joints, fixed to floor/wall all as specified and directed.

S&F PVC (SWR) bends, 75 mm bore all as specified and directed.

S & F PVC(SWR) Tee 75 mm bore complete all as specified and as directed.

S&F in repairs CP bottle trap, 32 mm dia fancy type as approved by engr-in-charge, Complete of Make - Jaguar or equivalent in M/s Parry ware/M/s Johnson including taking down the unserviceable one all as specified and directed.

Stainless steel grating,150 mm dia, with waste hole, of PTMT (minimum weight 40 gms), fixed in repairs, all as specified and directed.

M&L for PVC (SWR) floor trap with grating,75 mm bore, including jointing to waste pipe with solvent cement including taking down of existing old trap all as specified and directed.

S&F PVC, 32 mm dia,polythelene of low density of pressure raing 4 kgf/cm2 fixed completely to wall/floor for wash hand basin including taking down old one all as specified and as directed.

M&L for PVC (SWR) nahani trap with grating,125/110 mm bore, including jointing to waste pipe with solvent cement including taking down of existing old trap all as specified and directed.

S&F Health Faucet with hook and 1.5 mtr tube full brass 15 mm. Make ;-Jaguar or equivalent.

S&F Pillar cock swan neck with swinging spout for WHB Chromium plated, 15mm, Make ;-Jaguar or equivalent.

S&F 2 in One Bib Cock, Chromium plated, 15mm all as specified and as directed. Make ;-Jaguar or equivalent.

S&F Bib Cock, Chromium plated, 15mm all as specified and as directed. Make ;-Jaguar or equivalent.

S&F Bib Cock, PVC, 15mm,all as specified and as directed. Make ;-Prayag or equivalent.

S&F 2 in One Angle Valve, Chromium plated, 15mm, all as specified and as directed. Make ;-Jaguar or equivalent.

S&F Angle Valve, Chromium plated, 15mm, all as specified and as directed. Make ;-Jaguar or equivalent.

S&F Soap dish holder (CP Brass) all as specified and as directed. Make ;-Jaguar or equivalent.

S&F Towel Rod all as specified and as directed. Make ;-Jaguar or equivalent.

S&F Toilet Roll Holder with Flap all as specified and as directed. Make ;-Jaguar or equivalent.

S&F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and taking down old one complete all as specified and as directed

S&F vitreous chain squatting pan, 'Orrissa pattern" size 630x450mm white with integral foot rests, including PVc ' P' or 'S' trap (excluding flushing cistern and flush pipe) complete bedding all as specified and directed.

S&F vitreous china wash down water closet pan (Pedestal pattern), white, including fixing of flush pipe, nut bolts, brackets etc complete all as specified and as directed.

S&F Plastic water closet seat cover, black/white, closed pattern with flat bottom, and cover and mild steel chromoium plated or aluminised hinging devices complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F in repair Vitreous China wash basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling ,waste pipe of 32 mm dia low density polythelens (LDPE) pipes of pressure rating 4 Kgf/Sq cm, brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm from stop valve etc complete all as specified & as directed Make :Prayag/ Parryware/Hindware

Material and labour for grouting in roof through PVC nipples at a spacing of 45 to 60cm C/C including drilling injection points to a depth of 75-100mm, providing 10mm dia PVC nipples and pressure grouting using with and including cement mixed with plasticizing admixture like FOSROC (model CEBEX100) or PIDILITE (model 207 PIDICRET 8AM) @ 225gms/50kg of cement to fill up all capillaries/ voids/ honeycombing areas inside concrete with pressure of 2 to 4 Kg/Sqcm and continued till refusal. After grouting, nozzles to be sealed with the sealing compound/mortar etc, all as per manufacturers instructions and as directed. Note:- After ascertaining the location of leakage/ seepage/dampness under item No 78.00 here-in-after, this item shall be operated at the required location.

Taking down carefully existing bitumen tar felt including plaster concrete/brick coba/tiling from the roof/parapets till RCC slab, and roughening the surface ,wire brushing , cleaning and washing with water etc, removing the rubbish to a distance exceeding 500m but n.exc 1Km & depositing where directed .

All as per item No-75 above but on vertical surfaces like parapets,except brick/cobra tiling etc all as specified and directed.

M & L for rendering over roof slab 10 mm thick in CM 1:3 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement and finished surfaces fair and even complete all as specified and as directed. (WPC shall be measured and paid separately)

Material and labour for roof treatment on RCC roof slab complete as mentioned below, all as specified and as directed:- (i) Cleaning the concrete surfaces of RCC roof slab as obtained after demolition of cement tiles,/taking down of existing water proofing treatment thoroughly with wire brushes, washed and dried. (ii) Checking the roof slab by flooding test with water till total elimination of leakage/seepage/ dampness all as specified in SSR Part-I (after ascertaining location of leakage/seepage/ dampness, carrying out treatment vide item No 74.00 hereinbefore of pressure grouting shall be operated at the required locations). (iii) Brushing surface with neat cement slurry at the rate of 3.00kg of cement per Sqm. (iv) Cleaning the plastered roof surfaces and applying a coat of bitumen primer @ 0.3 kg/sqm on top of dry surface. (v) Laying 40 micron thick aluminium foiled APP modified polymeric membrane 3mm thick with non woven polyester core laid and bonded to the sub-strata and over-laps shall be sealed/fused by flame "torch', application method all as per manufacturer's instructions. (vi)APP modified polymeric membrane shall be covered with bitumenous based aluminium paint @0.2 kg/sqm in two coats

M & L PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in filleting and benching slightly rounded off etc. Including necessary form work, if any, complete all as specified and as directed.

M & L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate RCC roof slabs to fill undulations to achieve uniform slope complete all as specified and as directed.

Vishwakarma Engineering Works

Meet Road Lines

dhanshree enterprises