Repair of girls toilet at PS Banu W. No. 03 Pyt Pathwar (0.30 Lac) and Repair of underground water tanki with motor connection to roof top Syntex Tanki and white wash of Pyt Ghar, Pathwar, Block Khoon (0.30 Lac), Pyt Pathwar, Block Khoon Scheme. P

PART-A 6mm cement plaster to ceiling of mix 1:3

12mm thick cement plaster of 1 cement: 6 fine sand mix.

Providing and laying/fixing ceramic Glazed tiles 300X300mmmm (thickness to be specified by the manufacturers) of 1st quality conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment etc., complete.

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.: 15 mm dia. nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore 122 mm long, weighing not less than99 gms.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931