Completion of incomplete work for special Repair of roof treatment in comn complex at bldg No P-43 at Army HQ Sig Regt under GE(U) E/M Meerut Cantt

Amount

Demolition of roof treatment any thickness, including plastering and leeping (whether full thickness removed or only part thereof) and removal/disposal of unserviceable materials, debris and rubbish to a distance exceeding 500 mtr and not exceeding 1.5 Km complete all as specified and directed.

Cutting out crackes to V-section in existing roofs or terracing, cleaning out and filling solidly with hot mixture of bitumen and clean dry sand 1:1 complete all as specified and directed

Brushing neat cement slurry with cement @ 3 Kg per sqm on old concrete surfaces of roof after cleaning complete all as specified

M & L PCC (1:2:4) Type B0 (using 12.5 mm graded stone aggregates as in roofs as leveling coarse or roof kerbs etc to receive roof treatment complete all as specified and directed

M&L for 10mm thick (Avg) screed bed or bedding layer in cement mortar 1:3 over roof surface, mixed with water proofing compound @ 3% by weight of cement or as per manufacturer instruction surface finished even and fair without using extra cement complete all as specified and directed (Note: WPC will be measured and paid seperatly)

Supply only integral water proofing compound (ISI mark)

M&L for cleaning the roof surface and applying bitumen primer @ 0.30 kg/sqm and applying one coat of hot blown bitumen 85/25 grade @1.20 kg/sqm and providing and laying 3mm thick (APP) modified membrane weighing not less than 3.6 kg/sqm having softening point not less than 800 N/sqm, tearing strength of 180N with side lap 75mm and end lap 100mm, laying by application of torch and applying one coat of hot blown bitumen 85/25 grade @1.20 kg/sqm on top entire surface and finally painted top surfaces with two coats of aluminium paint @ 0.10 ltrs/sqm per coat complete all as specified and directed.

Cutting grooves in brick wall, 75 mm wide and 65mm deep and shaping horizontal face of grooves with cement mortar 1:3 complete all as specified and directed.

Taking down cement or cement lime plaster on brick walls including raking out joints, hacking for key scrubing down with water etc complete all as specified and directed

M&L for 15 mm thick cement plaster on brick or concrete surface finished even and smooth without using extra cement built in CM 1:6 complete all as specified and directed

Material and labour for preparing new plastered surface and applying two coats of cement base paint over one coat of priming plastered and other surfaces with alkali resistant priming paint complete all as specified and as directed.

Demolition of brick work masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed .

M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed

M&L for cement concrete in surface channel in 1:3:6 type C2 (using 40mm graded aggregate) including forms, moulds, mitred/stopped ends etc complete all as specified and directed

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Taking down AC rain water pipes 100mm dia in any patterns and in any size, conditions, including all fittings etc complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F of PVC (SWR) bends any radius for 110 mm bore complete all as specified and directed

S&F of PVC (SWR) couplers for 110 mm bore complete all as specified and directed

S&F stack clamps for 110 mm dia PVC(SWR) pipes of 50 mm x 5mm flat iron and 16mm dia round iron and nuts and securing ends of stays to wall and roofs complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20mm bore GI tubing complete all as specified and directed

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 25mm bore GI tubing complete all as specified and directed

S&F GI steel water tubing 20 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete laid in trenches or fixed to wall etc complete all as specified and directed.

S&F GI steel water tubing 25 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete laid in trenches or fixed to wall etc compete all as specified and directed.

S & F 2000 ltrs capacity rotational moulded polyethylene water storage tank (double layer) (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I including dismantling existing water tank and remove to store complete all as specified and directed

S & F 1000 ltrs capacity rotational moulded polyethylene water storage tank (double layer) (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I including dismantling existing water tanks and remove to store complete all as specified and directed

S & F 25 mm dia ball brass valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm-210gms./25mm-455gms./ 40mm-690gms) complete all as specified and directed.

mohanlal gupta

Maa Vaishno Enterprises

M/S AGARWAL CONSTRUCTION CO.