Atal Gyaan Kendra Shekhsar

work detial

Earth work in foundation excavation up to 1.5m, ramming bottom, dressing sides, back filling and disposal of surplus soil with in a lead of 50m.

Cement concrete in foundation and plinth with stone ballast size 40mm including curing and compaction etc in 1:4:8 mix

Brick work in foundation and plinth using bricks of class designation-75 in CM 1:6

Damp proof course with RCC 1:1.5:3 mix

Brick work in super structure using bricks of class designation-75 in CM 1:6

Reinforced cement concrete work including curing compaction, finishing with rendering in cement sand mortar 1:3 and making good and joints excluding cost of centering, shuttering and reinforcement in 1:1.5:3 (1cement: 1.5course sand: 3- graded stone aggregate 20mm nominal

Providing and fabricating reinforcement for RCC work including straightening, cutting, bending,placing in position and binding (including cost of binding wire) in foundation and super structure up to 4.5m height above plinth level hot rolled deformed (IS: 1139) cold twisted (IS: 1786) bars

Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of from work

P & L Cement concrete on roof

S & F Mosaic tiles on roof

12mm thick plaster on new work including curing and racking of joints in CM 1:4

Add extra for ceiling-12mm thick plaster on

20mm thick plaster on new work including curing and racking of joints in CM 1:6

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete (PWD BSR-2022 - Less-10%)

Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work ( Two or more coat incuding base coat of water proofing cement paint) -(PWD BSR -2022 Less- 10%)

Wall painting with plastic emulsion paint of required shade including all scaffolding.New work ( Two or more coat incuding base coat of water proofing cement paint) -(PWD BSR-2022 Les- 10%)

S & F iron door

Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038- 1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm.of 1:3:6(PWD BSR-2022 Les- 10%)

S & F wire mesh on Section window

S & F Iron bars on Section window

Enamel painting on door and window

Earth work in filling with ordinary soil

Carriage of earth-lead One KM

Cement concrete in floor with stone ballast size 40mm including curing and compaction etc in 1:6:12 mix

S & F Polished Kota stone flooring

Wiring for fan/light point in PVC condut pipe as per specification

Wiring for circuit/submain as per specification- 2x1.5Sqmm

Yojna board & Contingency charges