Renovation (Civil and Electrical works) of Type-III Staff Quarters-12 Units (C-33 to C-44) and 04 Units (DAC-1 to DAC-4) and Type-IV 04 Units (D-1 to D-4) at CSIR-NIO, Goa.

Amount

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour. Old work (one or more coats)

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

Applying priming coat:With ready mixed aluminium primer of approved brand and manufacture on resinous wood work and plywood

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Providing water proofing treatment over the prepared surface with two or more coats with Smart care damp proof course of Asian paint as per the reccommedndation of manufactures including removing existing external paint by scrapping the surface smooth, washing with jet water spray machine including double scaffolding, all taxes, labour & transport complete.

Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :100x70x4 mm (ordinary type)

Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :150x10 mm

Providing and fixing bright finished brass handles with screws etc. complete:125 mm

Providing and fixing bright finished brass hard drawn hooks and eyes. 150 mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Providing and fixing Aluminium curtain rod having wall thickness of 1 to 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 25 mm dia

Providing & fixing mosquito nets netlon or equivalent make over the window frame including fixing Velcro tape in the wooden frame and net with screws/ nails etc.

Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal dia

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab upto 0.50 sqm

Providing & fixing Stainless Steel towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality. 600mm long towel rail with the width of 70mm to 78mm.

Providing & fixing door viewer in main door

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Crack filling:-All the cracks to be sealed shall be saw cut or chiselled to form a V groove of required dimention but not exceeding 30 mm width. The grooves shall be cleaned to remove all the loose particles, dust etc. & shall be sprinked clean water before applying the sealing mortar Renderoc CS Single part, non shrink cementitious, crack sealer for the plaster, masonary & concrete of Fosroc chemicals (I) Pvt Ltd.It shall be mixed with the proportion of 1 part of water top 2.5-3 parts of Renderoc CS, by volume. Through mixing should be carried out till a smooth homogenous mixture is obtained. All the filled grooves are to be cured for a period of three days.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing & fixing UPVC pipes including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement & testing of joints complete as per direction of Engineer-in-charge.

15 mm nominal outer dia pipes

20 mm nominal outer dia pipes

25 mm nominal outer dia pipes

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. Including removal of existing plaster.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 gradewith approved colour, design & pattern.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931: 15mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931: 15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore

Providing & fixing CP brass health faucet (hand spray) in toilet including necessary piping/fittings etc. complete of ARK make, including removal of existing piping/fittings.

Providing & fixing C.P.brass two way bib cock of approved quality including CP flange of ARK make, including removal of existing piping/fittings.

Providing and fixing CP brass pillar cock of approved quality and colour.15 mm nominal bore, including removal of existing piping/fittings.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :100 mm diameter

Providing & fixing Geaser point including hot/cold water connection pipe & CPVC pipes & fittings excluding bib cock & stop cock as per direction of Engineer-in-charge.

Providing & fixing Aquaguard water point including UPVC pipes & fittings as per direction of Engineer-in-charge.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour: 15 mm nominal bore with 45 cm length

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter, including removal of existing G.I/PVC pipes.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter, including removal of existing G.I/PVC pipes.

Providing & fixing rigid PVC pipe 10kg/cm2 including fittings complete socketed 40mm dia meter,including removal of existing G.I /PVC pipes.

Providing & fixing rigid PVC pipe 10kg/cm2 including fittings complete socketed 50mm dia meter ,including removal of existing G.I /PVC pipes.

Providing & fixing washing machine outlet of 75 mm UPVC pipe in the wall including making hole in wall, finishing with plaster & white cement.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe: 40 mm dia

Providing and laying ceramic glazed floor tiles of size 300 x 300 mm (thickness to be specified by the manufacturer) of 1st quality confirming to IS:15622 of approved make in colours such as White,Ivory, Grey,Fume Red Brown,laid on 20 mm thick cement mortar 1:4(1 cement:4 coarse sand),Joining with grey cement slurry @3.3 Kg/sqm including pointing the joints with white cement and matching pigment etc.,complete.

Providing and fixing 1st quality ceramic glazed floor tiles confirming to IS:15622 (thickness to be specified by the manufacturer) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-charge in skirting,risers of steps an dados over 12 mm thick bed of cement mortar 1:3(1 cement:3 coarse sand) and joining with grey cement slurry @3.3 Kg/sqm including pointing in white cement mixed with pigment of matching shade complete.

Kotah stone slab flooring over 25 mm thick in risers of steps, skirtings, dado & pillars laid on 12mm (average) thick cement mortor 1:3 (1 cement : 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.

Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Openable windows and ventilators using 18 mm series shutters section.Figured glass Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 75×40×2.5 mm (ordinary type)

Providing and fixing bright finished brass handles with necessary screws etc complete:100 mm

Providing and fixing first class marine ply with one coat primer & two coats of oil paint etc.complete 18mm thick

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc.complete : 2nd class teak wood 50x12 mm

Providing & fixing wash basin with C.I.brackets ,15mm C.P.brass pillar taps,32mm C.P.brass waste of standard pattern ,including painting of fittings & brackes,cutting & making good the walls whever required. White vitreous china wash basin size 550*400mm with a pair of 15mm C.P.brass pillar tabs.

Dismantling tile works in floors & roofs laid in cement mortar including stacking material within 50 Mt.lead for thickness of tiles 10mm to 25mm

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25 mm nominal bore, weighing not less than 62 gms

Providing and fixing R.P.V.C. vent cowl: 110 mm dia

Providing and fixing R.P.V.C. vent cowl: 75 mm dia

Removing and refixing of door/ window shutters paneled or paneled and glazed including replacing of existing hionges chiseling etc complete as directed by Engineer- in – charge. Above 1 Sq.m area

Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. 110 mm dia.

Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. 75 mm dia.

Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :110 mm dia

Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :110 mm dia

Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :75 mm dia

Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : 75 mm dia

Providing and fixing double “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : 75 mm dia

Description of Work / Item(s)

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. Group - B

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. Group - A

Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

Circuit Wiring for light boards with 2X1.5 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 1.5 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing of suitable 5/6 Amps Piano type Socket with 5/6 Amps Pianottype Switch Unit in a suitable PVC / GI box on surface or in recess with , connection, painting etc. as required.

Supplying and fixing of suitable universal type 6 pin 5/6 A& 15/16 Amps Piano type Socket with 15/16 Amps Pianot type Switch Unit in a suitable PVC / GI box on surface or in recess with , connection, painting etc. as required.

Supply and fixing AC point with suitable size GI box with modular place and cover in front on surface or in recess, including providing and fixing of 25 A Modular socket outlet and 25A modular SP MCB, "C" curve including connections, painting etc., as required.

Supply and fixing Geyser point with suitable size GI box with modular place and cover in front on surface or in recess, including providing and fixing of 6 Pin 15/16- A Modular socket outlet and 16 A modular SP MCB, "C" curve including connections, painting etc., as required.

Supply and Fixing of stepped type electronic fan regulator on the existing switch box including connection etc. as required

Supply and Fixing of PVC/ Backlite holder/Angle holder and complete as required

Ceiling Rose 3 Plate

Supplying and fixing 5 amps to 32 amps rating, 240 volts, "C" curve, Single Pole (MCB) miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Double Pole

Triple Pole and Neutral

Supplying and fixing of 4 way horizontal type , three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 8 way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing, including removal of the old fan and returning the same to stores, etc., complete as required.

Exhaust fan 9" with / without loovers similar to Orient Make 9.84" Ventilaor DX 250 mm model or its equivalent

Supply, Installation, Testing and Commissioning of LED Tube Light (10 Watts) including removal of the old fittings and returniing back to stores, etc., complete in all manner.

Supply, Installation, Testing and Commissioning of LED Bulk Head including removal of the old fittings and returniing back to stores, etc., complete in all manner.

Removal of existing wiring from 1.5 sq.mm to 10 sq.mm Wires with PVC conduit/metal conduit /PVC casing capping and shifting the material to stores as instructed by Engineer in charge

Removal of old switch board of different sizess upto 16 Way approx and shifting the material to stores as instructed by Engineer in charge.

Supply and fixing of Buzzer/ call bell suitable for single phase, 230 V complete as required,

Description of Work / Item(s)

Amount

Summary Sheet for Renovation (Civil and Electrical works) of Type-III Staff Quarters-12 Units (C-33 to C-44) & 04 Units (DAC-1 to DAC-4) and Type-IV 04 Units (D-1 to D-4) at CSIR-NIO, Goa.

TOTAL OF BoQ1 FOR PART A - CIVIL WORKS

TOTAL OF BoQ2 FOR PART B - ELECTRICAL WORKS

PREMIER BUILDERS GOA PRIVATE LIMITED (BID ID -819803)

PREMIER BUILDERS GOA PRIVATE LIMITED (BID ID -819803)

PREMIER BUILDERS GOA PRIVATE LIMITED (BID ID -819803)