SPECIAL REPAIR TO BLDG NO P-11 AT USMAN LINE UNDER GE STM CHENNAI

Amount

BOQ UPLOADED ON 20 JUN 2024

SCH "A" PART-I ( B/R )

Demolition cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for.

Demolition cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level).

M & L for strengthening the reinforcement exposed RCC soffit surfaces with providing and applying Renderoc SP40 mixed with water in ratio 0.16 a high strength shrinkage controlled cementitious repair mortar average thickness of 50mm incuding provision of Galvonic anode with additional reinforcement and shear connectors drilling 12mm dia holes upto a depth of 75mm maximum and fixing 8mm dia L shaped anchor rods at every 300 mm c/c, fill the drilled holes with Lokfix E77 over anti corrosive coating with Nitozinc primer of Fosroc including necessary chipping the spalled old concrete in soffit of the slab and provision of scaffolding all asspecfed and asdiected.

M & L for Strengthening Madras terrace floor slab with Lime grouting, Lime mixed with modified Ligno sulphonate based injection grouting at construction joints, leaking spots and honey combs with pump, fixing the nozzles and chipped portions of nozzles shall be reinstated using Lockfix S as per manufacturers specifications.

S & F mild steel TMT bars 6mm to 8mm dia, cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with M S wire annealed not less than 0.9mm dia all as spcd.

M&L Rendering 15mm thick on sunken slab concrete surfaces finished even and smooth with CM 1:4 mixed with liquid water proofing compound as per manufacture instructions to receive sunken slab WPT. (Note : Water proofing liqu:d to be measured and paid separately)

Supply only integral water proofing compound.

M&L APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.

M & L for Cement concrete Type E2 1.5:10 (40 mm graded graded graded graded graded aggregate) aggregate) aggregate) aggregate in foundations, filling and mass concrete

M & L ‘for providing 25 mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) under layer of floor tile finishes

M & L Non skid ceramic tiles 7 to 8 mm thick area of each tite exceeding 0.06 sqm but not exceeding 0.11 sqm in floors étc set and jointed in neat cement slurry and pointed in white or coloured cement to match as in coloured tiles over and including cement screed 15 mm thick in CM 1:4 all as directed

M & L Non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in while or coloured cement to match as in coloured tiles over and including cement screed 15 mm thick in CM 1.4 all as directed

All as per item No 12 above as in skirtings over 10mm thick back coat in CM 1:4

Demolition of brick work.built in cement mortar.

M & L for providing brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4

Dismantling of floor, hearth or wall tiling incl cement mortor bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises.

Material and labour for glazed ceramic coloured tiles, 350X250x7 or 450 x 350 mm x7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement plaster 10mm thick in CM 1:3 all as specified

S&F in repair vitreous china wash down water closet (pedestal pattern) white, of style and pattern as existing, complete with and including plastic seat cover, white fixed in repair all as directed. (Make: Hindware / Parryware)

Supply and fix in repairs chromium plated cascade health faucet with minimum 1200mm long pipe of fancy type all as specified.

S&F in repairs PVC, syphonic action type, flushing cistern, low level, white, 10 firs, with inlet ball valve, float, handle and flush pipe incl. brackets including 32 mm dia tushpipe Make; Parryware / Slimline

S&F in repairs Bib taps 15mm bore cast copper alloy with crutch or butter fly handle chromium plated screwed down for iron pipe or for brass ferrule fixed.

S&F in repair stop vaIves15 mm bore chromium plated with long shank and cup (Concealed type) high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed

S & F in repair CP brass shower rose 125mm size suitable for 15mm bore pipe complete all as specified.

S&F Vitreous China wash basin, white, flat back, size 630x450mm including cutting for and pinning in ends of brackets or erecting stand brackets, 32 mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms & waste pipe inc1uding taking down of old wash basin

S&F in repair pillar taps cast copper alloy wth capstan heads, chromium plated screwed down high pressure long screwed shanks and fly nuts fancy type all as spcd

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600mm.

S&F in repairs brass chromium plated tubular towel rail 20 mm dia ,D type, 60 cm long between flanges.

S&F in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in floor /walIs, 75mm bore.

S&F in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in floors/ walls, 110 mm bore.

S&F PVC (SWR) bend 110 mm bore.

S&F PVC (SWR) floor trap with grating including jointing to solvent cement wast pipe 75 mm dia.

S&F PVC (SWR) floor trap with grating including jointing to solvent cement wast pipe 110mm dia.

S&F PVC (SWR) vent cowl 110 mm

S&F PVC (SWR) junction single, (Single T) equal or unequa for 110 mm bore pipe with access door

S&F PVC (SWR) junction single, (Single T) equal or unequa for 75 mm bore pipe with access door

S&F PVC (SWR) bend 75 mm bore.

S & F rotationals moulded polythylene water storage tanks of capacty 1000 litres (cylindrical, vertical with closed top) hoisted and fixed in position all as specified including taking down old tanks

S & F Ball valves 25 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

S&F 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe.

Taking up or taking down steel/iron tube of 20 mm bore and connections including cleaning for refixing or removal to store complete all as specified.

Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in wa1ls/floors complete all as specified.

Taking up or taking down steel/iron tube of 25 mm bore and connections including cleaning for refixing or removal to store complete all as specified.

Supplying and laying of 25 mm CPVC pipes SDR 11 & Plain. CPVC SDR 11 fittirigslaid in walls/floors complete all as specified.

Taking up or taking down steel/iron tube of 50 mm bore and connections including cieaning for refixing or removal to store complete all as specified.

Supplying and laying of 50 mnd CPVC ppes SDR 11 & Plain CPVC SDR 11 fittingslaid in walls/floors complete all as specified.

Taking down cement plaster on brick or stone walls , etc. including raking out joints, hacking for key, scrubbing down with water etc.

M&L Rendering 1Simm thick on brick or concrete surfaces finished even and smooth with CM 1:6 to internal wall surfaces all as spcd

M&L for Rendering external wall surfaces with polymer modified cement sand mortar with Nitobond AR / Nitobond SBR as per manufacturers specifications.

M&L.Rendering 10mm thick oñ fair faces of brick work or concrete ceiling”surfaces finished even and smooth with CM 1:3

Preparing new plastered wall surfaces and applying two coat of oil bound distemper over a coat of primer all as spcd and as directed.

Preparing new plastered wall surfaces and applying two coat of exterior weather proof paint over a coat of primer all as spcd and as directed.

Preparing new plastered ceiling surfaces and applying three coats of white wash all as spcd and as directed.

Complete removal of existing treatment on walls and applying two coats of oil bound distemper over a coat of primer to internal wall surfaces complete all as spcd and as directed.

Complete removal of existing treatment on walls and applying three coats of white wash all as spcd and as directed.

Complete removal of existing treatment on walls and applying two coats of exterior weather proof paint over a coat of weather proof primer to all external wall surfaces complete all as spcd and as directed.

Complete removal of existing treatment on ceilings and applying three coats of white wash all as spcd and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) exc. 1.5 Sqm but n. exe 4 Sqm each including making good disturbed surfaces

All as per item No 58 above but n exc 1.5 Sqm each.

M & L llnd class hard wood 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

M & L for II nd class hardwood plain solid straight chowkhats and frames, wrought framed rebated on thesölid, rounded or chamfered puttogether with glue pinned jointsall as spcd

M & L for II nd class hardwood plain solid fillets, square or rectangular in section wrought secured with screws, sectional area exc 13 & n exc 25 sqcm

M & L for II nd class hardwood plain sotid filIets, square or rectangular in section wrought secured with screws, sectional area exc 6 & n exc 13 sqCm

S&F Second class harJ\‘zood 35 mm thick giuzed and skeleton doer shutters, open rebated and prepared to receive glass, gauze etc., w'thout sash bars, edges. of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and supplied and fitted to chowkats.

S&F Second class hardwood 30 mm thick glazed and skeleton window shutters divided into squares with plain chamfered or rounded mitred and rebated sash bars, open rebated and prepared to receive glass, gauze etc., edges of framing plain, chamfered or rouhded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and supplied and fitted to chowkats.

S&F Solid PVC door Frame of size 50mmX47mm made out of Srnm plain colour PVC sheet reinforced with M.S Square tube, suppling &fixing in opening as per spcification &drawing Note:- i)Existing wall edges will have to be finished properly in cement plaster 1:4 . including fixing of 6 Nos wooden plugs for catch door frame size not exe 17Sqcm average sectional areas and 100mm long. ( i)Frame will have to be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS screw, 3 each on either side. (ii)PCC strip of section 5x5 mm will have to be created at bottom incl. smooth finish in each door opening.

S&F Factory Made Solid Panel PVC Door shuker 30mm thick (Style) consisting of frame made out of M S tubes for top & botom rails, M S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles andplain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail and jointed together with solvent cement, supplying & fixing in frame at site as per specification & drawing.

S&F Butt hinges 100 mm, mild steel hinges fixed with stainless steel screw with frame

S&F Butt hinges 75 mm, stainless steel type, anodised and fixed

S&F Alumininum anodised barrel tower bolts of extruded section 200 mm size

S&F Alumininum anodised barrel tower bolts of extruded section 100 mm size

S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm long

S&F Extruded aluminium alloy handles, fabricated type, anodised 125 mm long

S&F MS work as for held fasts conforming to Fe 290 Gde-E -165

Cutting holes.in brick walls exe half brick n.exc one brick, built in cement moriar for inserting hold fast and making good dismantled portion in cement concrete 1:2:4 type B-1 as required

M & L for old size Brick work with fly ash bricks straight or curved on plan and 6 metre mean radius built in CM 1:6 all as specified

S& F Aluminium anodised Hasp and staples inciuciing bolt lo hinge plate and fixed with screws, 125 mm long

Hacking out old broken glass (any thickn°ss, size, qua!:ty or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with b°ads exc 1.5 Sqm.

S&F 4.0mm ihick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and fixed ie wooden shutters

S&F 4.0mm thick frosted Sheet glass, ordinary quality and glazingwith oil putty in square n exc 0.5 sq. m in each pane and fixed to wooden shutters

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.

S&F 300 inm, ordinary. mild steel rat tail rod pakern springs including roller and roller plate compIe!e fixed in repairs

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.

M & L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of SE paint over a coat of pink primer

M & L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of SE paint

M & L for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of SE paint

Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings etc., or cutting out defective brick work for under pinning, including providing, fixing and removing shoring cleaning and stacking bricks, removing demolished materials not exc 50m complete all as spcd and as directed.

Forming jambs etc., to openings (to foregoing item), in Cement mortar 1:6, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work compete

MaKing good under cills or over arches, lintels and bressumers, including all pinning when necessary in Cement ortar 1:6

M & L for brickwork with old size fly ash bricks straight or curved on plan exe 6m mean raditis built in CM 1:6

Removing the existing roof treatment of any description completely and removed of all the debris from sité and rubbish off the premises complete all as directed.

M&L cement Sceed bed 20mm thick in CM 1:4 with us n“g waterproofing liquid as per manufacturers instructions.(WPC Measured and paid separately)

M & L for water proofing treatment with APP modified prefabricated five layer water proofing membrane, not less than 3mm thick and weighting not less than 3.80Kg/sqm reinforced with non woven polyester matt black finished over compatiahle primer at 0.3 Iitre/Sqm, touching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel afler necessary preparation of surface complete all as per manufactures instruclions . The over lap joint shall be provided of 75mm in longitudinal direction and 100mm in tranverse direction respectively. All the angles; abutments and the drainage outlets shall be sealed with extra care to ensure full bondage. Manufactures : IWL India Ltd/SAPL (ARGO-P) Hydrotech Ltd (Hydrotarne)/STP. Note : The work shall be carried out be authorised applicators of manufactures

M & L for providing repairs in between wooden rafters under madras terrace soffits with ”Rehderoc SP40 mixed with water in râtio 0.16 a high strength shrinkage controlled cementitious mortar applied at an average thickness of 50mm using a steel trowel in one layer and finished using a damp sponge all as per manufacturers specifications.

S & F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm complete all as spcd

M & L for Post constructional Anti - termite treatment along the external wall below concrete or masonry apron / plinth protection using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc., in apron usi\›g Chloropyriphos20 EC al as spcd and as directed.

M & L for Post constructional Anti - termite treatment to soil under existing floors / sub base using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holeswith CM 1:2 to match the existing floors / subbase using Chloropyriphos20 EC al as spcd and as directed.

Dismantling timber scantlings 40 Sq.cm and over in section, in any position, unframed work

S & F Joist, channel, angle or tee sections fixed independently without connecting plates, etc.,confirming to Fe-290 gde E-165.

M & L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of SE paint over a coat of red oxide primer

Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-I as required, superficial area exe 150 sq. cm but n exe 400 sq cm

M & L for making good the damaged / cracked / spaIIed~ concrete in soffits and sides of lintel beams/ Chajjas / slabs by chipping / scrubbing completely by wire brushes to make the surface rough to receive and applying two coats of epoxy based zinc rich primer master -Emaco P130 of BASF cr its equivalent make on rebars @ 2.8 Kg / litre and a applying solvent less epoxy resin based structural grade bonding egent on concrete surfaces and hand packing of cavities fibre reinforced thixotropic cementitious mortar including providing and fixing double scaffolding system upto G+1 bldg all as specified and as directed by Engr in Charge

Uprooting of shrubs / green veg grown in walls / slabs / chajjas / roofs shall be removed to the satisfaction of Engr in charge and sealed the cavities with chemicals and making good the surface with proper bonding agent all as spcd and as directed.

Dismantling reinforced concrete of any description and in any posicion , not otherwise specifically próvided for. ”

Taking down chowkhats or frames not exe 1.5 sqm each ”

All as per item No 106 here-in-before but exc 1.5m sqm but not exc 4.0 sqm each

Taking down shutters of any description n.exc 1 sq m each

All as per item No 108 here-in-before but exe 2.0 sqm each

Refixing in shutter n.exe 1 sq m each

Refixing in shutter exc 1 sqm but n.exe 2 sq m each

S & F expanded metal cut to length, bent to shape required and tying with and incl annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples or welding and complete to steel members, n exc 4 Kg per Sqm.

M & L for applying one coat anti corrosive agent (Fosroc) to existing cleaned steel reinforcement a per manufacturers instructions

SCH "A" PART-II ( E/M )

Taking down carefully copperf Aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling Point roses, pendants, regulators, sockets, etc can be measured sëparately) removing the material from wall/ceiling etc, making good the disturbed surfaces and taken as credit all as directed.

Material and Labour for Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor drawn through and including non-matallic rigid PVC conduit PVC conduit fittings and conduit asccessorries concealed in walls, roofs and floors etc., including Modular flush boxes and Modular cover plates for switches concealed in walls, roof and socket / electronics fan regulator f telphone socket, including provision of 1.5 sqmm PVC insulated unsheathed cable with multi stranded copper conductor as earth continmuity conductor and connecting to common earth dolly all as specified for one light/lan point controlled by one way switch complete including cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good. the disturbed surfaces, matching with the existing wall surfaces, cutting not exceeding 10 Cm girth all as specified and as directed.

(a) One light point controlled by one switch.

(b) One Ceiling fan point controlled by one switch and one regulator.

(c) One Exhaust Fan point controlled by one Switch

(e) One 3 pin 5 amps switch socket on independent board.

(f} One 3 pin 5 amps switch socket on same board along with other switches.

All as per item No.2 above but with 4 sqmm copper conductor cable with 2.5 sqmm PVC copper conductor cable as earth Point continuity conductor for one socket outlet 15/16 amps controlled by one switch 15/16 Amps on independent board all as speci£pd and as directed.

M&L for sub main wiring with PVC insulated, 1100 volts grade single core multistmnded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including one run of 6 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping incl accessories Fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly induding taking down old unsv all as specified and directed.

M&L for sub main wiring with PVC insulated, 1100 volts grade single core multistmnded copper conductor cable conforming to IS specifications, 2 runs of 10 sqmm including one run of 4 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping incl accessories Fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly induding taking down old unsv all as specified and directed.

Supply and lix Wall mounted LED 20 W Ballen Basic all purpose surface and wall mounted LED batten with Aluminium housing & Integrated electronic driver all as specified and as directed.

Supply and fixing wall mounted LED batten, Extruded aluminium housing provided efficient heat disipation with polycarbonate diffuser with Integrated driver high efficacy. Short circuit & voltage cut off protection, wide opearting voltage range of 140V to 270 V wide, lumen output of 1050, 10W including lamp with complete all as specified and as directed.

Supply and fix Endura PEARL 3 W MP Bldg Sec lights New genration energy saving & enviromental friendly lofe long versatile prssure die-cast aliminium IP 66 roadway lumiarie with high power LEDs as light source and electronic ndriver of Lamp type: 30W LED 6000K all as specified and as directed.

Supply and fix MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 8 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory including taking down Old DBs all as specified and directed. Make: CBS /Legrand/ ABB

Supply and fix MCCB four pole , 415 Volt, 100 Amps,16 KA , adjustable thermal & fixed magnetic setting including taking down Old MCCB complete all as specified and directed. l'4ake:Havells /L&T/ Le9rand/ ABB

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated Each with 100 Amps rated busbar with neutral link,12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Supply & Fix MCB SP 230 volts,40 amps ’C' Curve 10 kA Capacity including taking down Old MCB complete all as directed.

Supply & Fix MCB SPN 230 volts, 40 amps 'C' Curve 10 kA Capacity including taking down Old MCB complete all as directed.

Supply and replacement of metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one sinqle pole MCB 240 Volts 20 Amps all as soecified and as directed.

S & F Ceiling rose surface bakelite 6Smm x 50 mm two to three terminals all as directed.

S & F Modular switch 1 way 6A, 1 module, 240 Volts complete all as specified and directed

S & F Modular switch 1 way 16A, 1 module, 240 Volts complete all as specified and directed

S & F I Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed

S & F Modular socket 6 A/ 16 A - 2/3 pin combined 2 module complete all as specified and directed

S & F Modular Fan step regulator, 100W - 1 module for ceiling Fan of 1200 mm sweep all as specified and as directed.

Taking down Old unservicable fan ,Supply & Fix in replacement of.1200 mm sweep.ceiling fan BLOC rating, energy saving model with double ball bearing 230 volts 3 blades white in colour without regulator COC JPLETE WITH CANOPY, suitable DOWN ROD all as directed.(Note: Old Unservicable Fan to deposited to MES Store)Make: Havells or equivalent in Bajaj/ CG/ usha

Supply and exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louversincluduing all accessories as per site requirment complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out soft / loose soil for laying cables / pipes / erection of poles etc all as specified and as directed.

Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as directed.

Returning filling in soil including spereading levelliong watering well ramming in layers not exceeding 25 cm each all as directed.

Supplying and laying burnt brick "B" class standard size for protection of cable as directed.

Supply, lay, spread in trenches fine aggregate Sand including spreading, levdling, punning for cushioning of cable all as directed.

Supply & Lay cable XLPE insulated screened PVC bedded, gaivanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of following sizes all as specified and as directed.

(a ) 2 core 10 Sqmm

(b ) 3.5 core 50 Sqmm

Note :- i) Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used properly whereever required while connecting cables to the panel board. ii) Eaith work such excavation, refillina, etc. shall be measured separatelY under relevant items.

S&F of tubes light grade of size 40 mm dia galvanised with all fittings and fixed complete to walls and ceiling or laid in treanches, fixed on pole /under road crossing or passing through gutters etc including necessary road cutting and making good with PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) complete including taking down old u/s GI tubing all as specified and as directed.

Supply and fixing 20 Watts New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source complete ali as specified and as directed. Make:Havells/Philips/ CG

Supply and fix Pole mounted Sheet Moulded Compound(SMC) Box weather proof type with hinged type door off white color of size 240x130x110 mm comprising of 1 No MCB 6A and 1 No neutral link complete fixed on pole with suitable clamps, bolts and nuts all as specified and as directed. Make: Sintex

M & L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to earth wire 4mm dia by means of bolts, nuts, washers and check ńuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 5 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoad dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete ali as specified and directed.

power links (BID ID -3126278)

Kaadosh Real Estates Pvt Ltd (BID ID -3126342)