Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.7 LAccepted-AOC C2 PAIXOMONTIRO APTS BEHIND NSD ALTO DABOLIM VASCO DA GAMA GOA 403 801 | SOUTH GOA | GOA | 403801 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹45.8 L+₹6.0 L (15.1%)Rejected-Finance H NO 767 NEAR OLD POST OFFICE NEW VADDEM VASCO DA GAMA GOA 403 802 | SOUTH GOA | GOA | 403802 | L2 | Rejected-Finance HIGHER BIDDER | |
| 3 | L3₹47.5 L+₹7.7 L (19.3%)Rejected-Finance FLAT NO 4 VIRGINIA CO OP HOUSING SOCIETY AIR PORT ROAD CHICALIM VASCO DA GAMA GOA 403 711 | SOUTH GOA | GOA | 403711 | L3 | Rejected-Finance HIGHER BIDDER | |
| 4 | L4₹47.5 L+₹7.7 L (19.5%)Rejected-Finance | L4 | Rejected-Finance HIGHER BIDDER | |
| 5 | L5₹49.0 L+₹9.2 L (23.1%)Rejected-Finance | L5 | Rejected-Finance HIGHER BIDDER |
Tender Value
₹39.9 L
EMD Value
₹79,800
Closing Date
15 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI BIJENDRA SHARMA IDSE EE
GARRISON ENGINEER (NW) VASCO Opposite KV No.2, School, Shantinagar, Vasco-Da-Gama, Goa-403802
8511/E8
2023_MES_590162_2
8511/E8
Open Tender
Civil Works
Item Rate
180 days
VASCO
Class D Category a i
8 documents required · 8 mandatory
₹500
GE NW VASCO
₹79,800
Yes
21 Jul 2023
27 May 2023
17 Jun 2023
27 May 2023
15 Jun 2023
3 Jun 2023
27 May 2023 - 2 Jun 2023
Amount
M/L for gunniting exposed concrete surfaces of beam, column and slabs with one layer of conplast spray set modified concrete in proportion (50Kg cement 3 to 6mm granite chips 75 kg zonal sand 75 kg and complast 2% by weight of cement water 1 to the following locations :-
40 mm thick in columns
30 mm thick in beams
20 mm thick in slabs
S&F hard drawn steel wire fabric cut to length bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm dia not exc. 4 Kg/sqm.
Bonding the entire exposed surface with one coat of fosroc Nitop bond SBR as per manufacturer insltructions over whire fabric and surfaces of concrete structure
M&L for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep hole in structural members at the interval of 500mm center to center in staggered manner or as directed by Engr-in-Charge in RCC structural element. Work shall be carried out as under :- (i) Cleaning of holes - Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles - Insert 12mm dia Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun. Fix it inside the hole by applying thixotropic epoxy putty to ensure complete sealing . Cure the system for min 12 hrs. (iii) Cutting of nozzles - Cut the nozzles by chiser after completion of grouting without damaging structural elements.
M&L for Injecting low viscosity MONOPOL (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, including mixing of material. Mixing of materials :- Mixing of material components (part a&b) in the required quantities as per manufacturer's instruction by weigh batching. Grouting maintain the pressureat exit (0.5 to 1.0 kg/cm2) by monitoring pressure gauge at exit. Grout the material through prefixed nozzles in the structural element @ 100ml per nozzle. Repeat the process for all the nozzles.
M &L for removing the spalled concrete upto the sound core level and clean reinforcement with wire brush to remove loose scales, cleaning of the surface with wire brush and plenty of water so as to remove the loose particles, dust, laitance etc, remove the rust by using rust remover of approved make .Apply passivator coat using zinc primer of approved make on reinforcement bars. Apply bond coat using "Epoxy bonding agent" on entire surface, when bond coat becomes tacky apply repair mortar (mortar to be prepared by adding 20% Dr. Fixit Pidicrete MPB or equivalent to 1:3 cement sand mortar) at a thickness upto 15mm and subsequently built up the required thickness in subsequent layers of 15mm and finishing the final layer even and smooth as per manufacturers instruction and as directed. Make : M/s Pidilite Industries Ltd or Equivalent in M/S Krishna Conchem Products/ STP Ltd. Note- Universal polymerised repairs mortars single pack like pagel U40 or Dr fixit micro concrete may also be used
M&L Mild steel bars 10 mm dia and over, cut to length, bent to shape required including crancking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to TMT Bars.
M&L Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including crancking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to TMT Bars.
Demolition of stone /boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles.
Pre - cast cement concrete masonry with Grade C-5.0, (20mm graded stone aggregate) with solid blocks wall built in cement mortar 1:6
M&L Rendering 5 mm thick cement plaster on ceiling in CM 1:3 finished to even & smooth w/o using extra cement.
M&L Rendering 15 mm thick cement plaster on concrete solid block walls in two coats first coat of 10 mm in CM 1:4 & 2nd coat of 5mm in CM 1:4 mixed with integral water proofing compound finished to even & smooth w/o using extra cement. Note :- Integral water proofing compound will be measured and paid seperately.
Supply only water proofing compound
M/L rendering 15 mm thick in CM 1:6 on concrete solid block wall internal surface finished even and smooth without using extra cement.
Taking down cement plastering at any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed.
M&L Preparing new plastered wall surfaces and applying two coat of OBD over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on wall
M&L Preparing new plastered ceiling surfaces and applying two coats of OBD over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on ceiling
M & L for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm all as specified and as directed.
M&L for Surface Preparation, Cleaning the surface, removing the laitance, greese, old paints, contaminants, moss etc. with wire brush / high preesure jet. Damaged or loose plaster to be replaced & repaired with polymer modified cement-sand mortar with Dr. Fixit Pidicrete URP. Small cracks upto 5mm needs to be repaired with crack filling material Dr. Fixit Crack X and the cracks above 5mm shall be repaired by polymer modified mortar with Pidicrete URP. Make : M/s Pidilite Industries Ltd or Equivalent in Sika/ STP Ltd.
Dismantling mild steel work of any description not otherwise provided for
S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W including cleats,distance pieces etc
Dismantling plain or corrugated AC sheeting any gauge, thickness in roof coverings
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall of building/Hangar, fixed with self tapping screws as specified
Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
S&F PVC Rain Water Pipe 150 mm dia including all fittings, head , shoes, branches all as specified fixed in wall including joint with PVC adhesive
M/S DUBAL CONSTRUCTION
M/S jvsr constructions
M/s RAJ CONSTRUCTION
M/S Kartik Enterprises
K M SUBHANAIAH
Super Construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .