Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L 1₹30.8 LAccepted-AOC 145 SAINIK NAGAR RAIBARELLI ROAD TELIBAGH LUCKNOW | L 1 | Accepted-AOC Being Lowest | |
| 2 | L 2₹36.0 L+₹4.7 L (15.0%)Rejected-Finance GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | L 2 | Rejected-Finance Other than lowest | |
| 3 | L 3₹37.6 L+₹6.3 L (20.0%)Rejected-Finance 70 SUBHASH ROAD HARJINDER NAGAR KANPUR 208007 | KANPUR | KANPUR | UTTAR PRADESH | 208007 | L 3 | Rejected-Finance Other than lowest | |
| 4 | L 4₹39.6 L+₹8.3 L (26.5%)Rejected-Finance | L 4 | Rejected-Finance Other than lowest |
Tender Value
₹48.2 L
EMD Value
₹96,400
Closing Date
8 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) LUCKNOW
GE (EAST) LUCKNOW
SPL REPAIR TO ROOF EXISTING/CONVENTIONAL ELECTRICAL FITTING INTO LED FITTING/FIXTURES FOR BLDG. NO P-79, P-84, P-85, P-94, P-95 AND P-105 AND ANCILLARY BLDG. OF HQ CENTRAL COMD AND OTHER MINOR WORKS UNDER GE (EAST) LUCKNOW
2023_MES_632286_1
GE/E/LKO/T-73 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) LUCKNOW
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (EAST) LUCKNOW
₹96,400
Yes
27 Feb 2024
12 Dec 2023
9 Jan 2024
12 Dec 2023
8 Jan 2024
26 Dec 2023
Amount
Taking down chowkhat or frames with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but not exc 4.0 Sqm each complete with hold fasts etc complete all as specified and directed.
Demolition of cement concrete (unreinforced ) in floors and pavings not exc 15cm thickness (above or below GL) complete all as specified and directed
Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed.
Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in in CM (1:6) complete all as specified & directed.
M&L for brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specified and directed.
M&L for 16 to 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding of edge laid over 15mm thick screed bed in CM (1:6) including rounding of edge of stone slabs one edge complete all as specified and directed.
S&F powder coated (min thickness of powder coating 50 micron) anodised aluminum window shutter three track sliding type, section having frame size bottom with outer 92x45.5x1.5mm (section code 20617) , top and side 92x31.75x1.5 (section code 20831) & aluminum section of shutter top and bottom size 40 x 18 x 1.5 ( section code 20736) , interlock size 40 x 18x 1.45 (section code 20737), side/ middle size 40 x18 x1.55, (section code 20738) including necessary joining cleats, glazing clips rubber backing, anodised aluminum snap beading screw, anodised aluminum fitting complete as per site requirtement glazing by using 5mm thick plain sheet glass and ss wiremess of dia 0.36mm and aperture 1.4mm thick including powder coated aluminum grills of aperture 75 mm and fixed in frame of window all as specified and directed. Ref drg no celz/c-td/151 sheet no 1/1 & 2/2 . Note- 1. Glazed shutter glass thickness not less than 5mm and ss wiremess shutter with ss wiremesh as approved by GE is also included. No payment will be made separately. 2. No extra payment will be made for section profiles of higher sizes.
S&F aluminium anodized door with frame of size 100X44.5X 1.5mm, stile, middle and top rails of size 82X44.5X1.5mm thick and bottom rail of size 114X44.5X1.5mm thick including 5.5mm thick tinted glass panes with all fittings/ fixtures such as cleats, tower bolt, hinges, locking arrangement, pull and push handle of aluminium anodized, hydraulic door closer etc., complete including aluminium and rubber beading complete all as specified and directed.
M&L for TMT bars 10 mm dia and over for reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-415 or Fe-500 complete all as specified and directed.
M&L for RCC type B-1 (1:2:4) using 20mm graded stone aggregate as in slab supported on wall walls beams and columns in floors roof landings complete all as specified and directed.
M&L for brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
M&L form work for flat fair finished surfaces of concrete to soffits of suspended slabs such as roof slab not exceeding 200mm thick complete all as specified and directed.
M&L for joint free non skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15 mm thick screed bed in cement & sand mortar 1:6, complete all as specified and directed.
M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.
M&L for glazed ceramic tiles (coloured) 300x600 x 7mm thick on vertical surfaces such as dado, skirting etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering in cement & sand mortar 1:4, complete all as specified and directed.
M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size exc 0.11 Sqm but not exc 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed.
S&F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm prelam coloured PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed.
S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour ) PVC sheet on the front face & 2mm prelam (Nut Brown colur ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on page 161 of SSR (Part -II ) 2010 complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 125mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
M&L in repair galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified & directed.
S&F 15mm GI water tubing (concealed type), medium grade, galvanised with all fittings (and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.
S&F tubular towel rail, chromium plated brass 20mm dia 'D" type 60cm long between flanges complete all as specified and directed.
S&F PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed.
S&F vitreous china wash down water closet pan pedestal pattern, including P or S trap and connection to drain (or outgoing pipe) excluding flushing cistern and flush pipe complete all as specified and directed
S&F plastic water closet seat cover white, closed pattern with flat bottmom & cover and aluminum anodised hinging device complete all as specified and directed.
S&F wash hand basins vitreous china, coloured flat back size 550 x 400mm fixed including bracket complete all as specified and directed.
S&F CP grating doom 100 mm dia chromium plated complete all as specified and directed.
S&F, glass corner self assembly, fancy type, made of 6 to 7mm thick toughened glass of size 250x250mm, fixed with CP brackets, complete all as specified and directed.
S&F 15mm bore brass CP mixer valve wash basin for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F 15mm bore cast copper alloy chromium plated bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.
S&F angle valves 15mm bore , cast copper alloy chromium plated with long sunk and cap (Concealed type), screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.
S&F PVC connection of 15mm bore,600mm long with brass coupling on both ends of superior quality complete all as specified and ditected.
S&F PVC connection, heavy duty 15mm bore, 45cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed.
S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new PVC clamps complete all as specified and directed.
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new PVC clamps complete all as specified and directed.
S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.
S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend of any radius complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.
S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.
S&F PVC (SWR) floor trap 75/100mm, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F vitreous china urinals, half stall type (flat back), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed
S&F, 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed.
M&L for vitrified ceramic tiles light shade 8 -10mm thick (square / rectangular) polished, area of each tiles exc 0.18 Sqm not exc 0.36 Sqm, in floor etc set and jointed in neat cment slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed.
M&L for vitrified ceramic tiles light shade 8-10mm thick (square / rectangular) polished, area of each tiles exc 0.18 Sqm not exc 0.36 sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and directed.
S&F soap dish CP fixed with and including chromium plated brass screws complete all as specified and as directed.
S&F in repair CP brass soap dish fancy type complete all as specified and directed.
S&F health faucet for EWC CP hand hold with flexiable pipe, bracket etc complete set of superior quality complete all as specified and directed.
S&F in repair CP brass toilet paper holder complete all as specified and directed.
M&L for preparation of newly plastered wall surfces and applying three coats of white wash complete all as specified and directed.
M&L of two coat of white washing to old / new ceiling surfaces including preparation of surfaces complete all as specified and directed.
M&L of two coat of white washing old / newly plastered wall surfaces including preparation of surfaces complete all as specified and directed.
M&L for complete removal of existing old / new wall surfaces and appling two coats of oil bound distemper over a coat of 1mm thick average thick wall putty, complete all as specified and directed.
S&F in repair 15mm dia two way bib taps, cast copper alloy chromium plated fancy type handle screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.
Surface dressing not exc 15cm deep any type of soil complete all as specified and directed.
Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm in any type of soil complete all as specified and directed.
M&L for cement concrete1:3:6 type C2 using 40 mm graded stone aggregate as in foundations, filling and mass-concrete complete all as specified and directed.
S&F mild steel joist, channel, angle, or tee sections as in posts fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe-410-W (Gde E-250) complete all as specified and directed.
S&F for mild steel as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of FE410-W (Gde E-250) complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Cutting holes into or through brick walls built in cement mortar or cement lime mortar superfacial area not exc 150 sqcm complete all as specified and directed.
Material and labour for machine pressed precast concrete 60mm thick interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 complete all as specified and directed.
S&F mild steel work as in door or gates of angle or other section with gusset plates, rails, braces etc complete confirming to Fe 290 (Grade E-165) complete all as specified and directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store yard complete all as specified and directed.
M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified & directed.
M&L hard core of gauge not exc 63mm, deposited spred and levelled in layers not exc 15 cm thick, warered and rammed to a true surface complete all as specified and directed.
M&L machine cut kota stone slab flooring 20-25mm thick over 20mm cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F in repair false ceiling with 4mm thick E-board Everest make white prepainted designer ceiling board of approved texure fixed with GI imposed grid frame work of size not more than 600x600mm having 24mm wide T-section runner made of 0.33mm GI sheet and angle made of 0.45mm, GI sheet suspected with 4mm dia GI wire complete all as specified and directed. Note. All exposed surface of grid work shall be powder coated white.
M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall surface fair faces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall surfaces other than faie faces finished even and smooth without using extra cement complete all as specified and directed.
S&F size of frame 45x70mm factory made single extructed WPC (Wood Polymer Composite) solis door fixed in position with MS hold fast/lugs/SS dash fasteners required dia and length complete all as specified and directed.
S&F 30mm thickness factory made single extructed WPC (Wood Polymer Composite) solis door fixing with stainless steel hinges of required size and SS srews complete all as specified and directed.
S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically whereverrequired including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and directed.
S&F of powder coated of any colour aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. complete all as specified and directed.
S&F of prelaminated particle board of 12mm thick, exterior grade, prelaminated both side with decorative choice lamination ,fixed with beading to aluminiume frame work etc complete all as specified & directed.
S&F in repair 5.50mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the new surfaces, complete all as specified & directed.
S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.
S&F butt hinges of size 75mm medium weight, SS ISI marked complete all as specified & directed.
S&F 250 mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & directed.
S&F of aluminium body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed.
S&F in repair wash basins, Vitreous China (flat back type) size 600x480mm white, including cutting forand pinning in ends of brackets or erecting stand but incl of fixing of supply waste coupling and waste pipe complete all as specified and ditected.
S&F 12 mm thick toughened glass door shuter in single leaf with necessary eatching including all fittings and pivot at top fancy type glass handle of size not less than 300 mm on both sides of shutter to match with colour of glass shutter top and bottom aluminium rail with suitable locking arrangement incl glass film self adhesive(designed/normal) and all necessary fitting complete all as specified and directef.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
Taking down carefully Electrical light fittings of any type and size complete all as specified and directed.
Supply and fixing fitting with tube rod madeup of Material glass led tube ,voltage range 220-240v-50hz ,cct 6500k,lumen ,wattage 22w- 24 w surge 2.5kv ,CRI 70 POWER FACTOR >_0.9 ,110 L/W Wall, ceiling and conduit mounted batten suitable for T led lamp, suitable and single end T* LED lamp 18-22 watt inbuilt protection and Matelic body with fuse robust contructionfor long usefull life , for commercial use complete all as specified and directed.
Supply and fixing of surface mounted LED liner Mirror light luminaire of 2ft length with a system wattage of 12W with a nominal system lumen output of 1200 lumens and a minimum system efficacy of 100Lm/W. CCT shall be 6500K and CRI ≥ 80 and Housing shall be extruded aluminimum with powder coating & with IP20 protection, luminaire shall meet IP20 rating with surge protection of 2.5KVA, THD ≤10% and PF ≥ 0.95 complete all as specified and directed.
Supply and fixing recess mounting LED light fitting 1'x1' of 20/25 watt white powder coated CRCA housing with LEDs.,efficacy 100 lumen/watt,CRI>80 and pf>0.9,surge protection 2.5 KV, Seamless front frame with flat white high transmission acrylic cover and including cutting of 2x2 false ceiling sheet with cutting fitting size complete all as specified and directed.
Supply and fixing surface/wall mounting LED light fitting 1'x1' of 20/25 watt white powder coated CRCA housing with LEDs.,efficacy 100 lumen/watt,CRI>80 and pf>0.9,surge protection 2.5 KV, Seamless front frame with flat white high transmission acrylic cover and including cutting of 2x2 false ceiling sheet with cutting fitting size complete all as specified and directed.
Supply and fixing recess mounting LED light fitting 2'x2' luminaire architectural recessed luminaire with CRCA housing and Molded PC diffuser with an unique angular optics for making the illumination easy on eyes for light comfort in office areas with UGR<=19. The luminaire should have a color consistency SDCM< 5, CRI > 80 and choice of CCT: 5700K. Luminaire shall be designed to emit at least 4200 lumens and an efficacy of atleast 120Lm/W and maximum system wattage of 36 Watt, designed for ambient temp 45 deg C. The metallic electronic driver shall have a power factor >0.95, THD <10%, 4KV internal surge protection and the Ripple factor should be <5% to minimise the Flicker and Stroboscopic effect and The driver should be complied with Fixed output/DALI/POE version and Fixture should have an operating voltage range of 140-270VAC incl It should have over voltage protection @320V Cut-off with auto restart features complete all as specified and directed.
Supply and fixing recess mounting LED light fitting 2'x2' luminaire sensor based( Motion sensor) 36 Watt efficacy of atleast 120Lm/W and maximum system wattage of 36 Watt, designed for ambient temp 45 deg C and 2x2 ceiling light with an intelligent office lighting system with an inbuilt sensor thus avoids unwanted hassle of creating space for sensors also inbuilt sensor helps save additional 40%* energy, luminaire should provide 360Deg coverage around 8 ft area, High on aesthetics, payback period of less than 1.5 years, System wattage: 36/37 W with system lumen of 3700/42001m, system efficacy>100 Im/watt, Housing made with CRCA material, high transmittance PC diffuser to provide uniform light intensity distribution, IP20, THD<10%, available CCT: 4000K/5700K/6500K, CRI>80, PF>0.90, Operating voltage: 220-240Vac at rated frequency of 50Hz complete all as specified and directed
Supply and fixing decorative fancy type LED lighting fixture double bracket suitable for 9 watt LED bulb with required electrical connection complete all as specified and directed.
Supply and fixing of wall/surface mounted integrated batten LED light luminaire of 4ft length with a system wattage of 20-22W with a nominal system lumen output of 2000-2200 lumens and a minimum system efficacy of 100Lm/W. CCT shall be 6500K and CRI ≥ 80. Housing shall be extruded aluminimum with powder coating & with IP20 protection, The luminaire shall meet IP20 rating with surge protection of 2.5KVA, THD ≤10% and PF ≥ 0.95, complete all as specified and directed.
S&F 9-15 watt LED bulb (lamp) complete all as specified and directed.
Supply and fixing LED building security light of 35W Led Street Light made up of pressure die cast aluminium housing with Polycarbonate cover and unique road optics for better uniformity. The luminaire shall be with higher ingress protection IP66 and impact resistance of IK07. Operating voltage range: 140-270V/50Hz, Lumen efficacy of LED >120Lm/W, CRI≥70, CCT-5700K, & SDCM<5. Powered by built-in potted LED driver gives constant light over wide voltage range. Shall have High Voltage cut-off@325V & safety from 440V (P2P) for 8 hours. Surge protection 4 kV, Power factor ≥0.95, THD ≤10 complete including 25x3 mm flat iron with bracket of GI pipe light grade 25 mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting complete all as specified and directed.
Supply and fix LED gate light of 40/45W LED Postop luminaire with aluminium pressure die-cast mounting spigot & polyester powder coating in addition to a specific weathering resistance treatment, color RAL7011. Non-yellowing transparent Polycarbonate UV-protected round symmetrical diffuser with circular radial pattern for glare-free and even light distribution. High Efficiency long life LED module with efficacy of >100Lm/W, CCT 4000K, and CRI >70. Powered by built-in electronic driver with THD <10%, 4kV inbuilt surge protection, high cut-off at 325V & auto-restart, including 8hrs. protection from 440V (P2P). Suitable for pole mounting having OD of 60 mm and height of 6 meters. Fixture lumen efficacy >4500 Lm, IP66 (no glue), IK05, PF>0.95, Operating voltage range: 140- 277V, complete all as specified and directed.
Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete all as specified and directed.
Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.
All as per serial item No 102 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.
All as per serial item No 102 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.
All as per Serial Item No 102 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 1.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board
S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and directed.
S&F Switch Modular 16A single pole, one way, 1 module complete all as specified and directed.
S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.
S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.
S&F Modular White cover plate with frame,12 module complete all as specified and directed.
S&F Modular White cover plate with frame, 8 module complete all as specified and directed
S&F Modular White cover plate with frame, 3 module complete all as specified and directed
S&F Modular White cover plate with frame, 2 module complete all as specified and directed
S&F Modular Metal flush box 12 module complete all as specified and directed
S&F Modular Metal flush box 8 module complete all as specified and directed
S&F Modular Metal flush box 3 module complete all as specified and directed
S&F Modular Metal flush box 2 module complete all as specified and directed
Supply and fix LED tube light fittings 1200 mm,20 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminum housing enviromental friendly, energy efficient complete all as specified and directed.
Supply and fix LED tube light fittings 600 mm, 10 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminum housing enviromental friendly, energy efficient complete all as specified and directed.
Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.
Taking down carefully Exhaust fan of any sweep complete with all accessories, dismantling blades and deposit in safe custody of AGE E/M Yard-II for BER procedure complete all as specified & directed.
Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
M&L for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
Supply and fix in replacement of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.
Supply and fix in replacement of MCB, SP, AC, 240 volt of 06 to 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.
Supply and fix in replacement of MCB, DP, AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.
Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.
Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 4.0 core complete all as specified and directed.
Excavation in trenches soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of pipes/cables etc getting out and bottom surface to required gradient complete all as directed & specified
M&L for returning filling in including spreading leveling watering and well ramming in layers each not exc 25 cm thickness complete all as specified and directed
M&L for removal of surplus spoil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed
Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cable for under ground cable complete all as specified & directed. Note:- 18 cm punned down thick shall be considerd for mesurement)
M&L for old size sub class 'B' bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable , adjacent/abutting each other complete all as specified and directed.
M&L 25 mm dia GI tubing medium grade with all fittings complete to walls and ceilings (or) laid in floors complete all as specified and directed.
S&F Gun metal gate valve with iron wheel hand ,screwed both ends,complete for size 25mm bore including connecting materials complete all as specified and directed.
S&F Gun metal gate valve with iron wheel hand ,screwed both ends,complete for size 20mm bore including connecting materials complete all as specified and directed.
M&L for cutting GI Pipes and reducing to required length of dia 40 mm bore and inserting Tee 25x 25x 20 mm GI pipe including nessasary excavation returning filling & removing complete all as specified and directed.
S&F exhaust fans, Steel body, ac, single phase, 230/240 v of size 300 mm sweep with louver and making connection with twisted copper flexible wire 23/0.076mm complete all as specified and directed.
Supply and fixing in replacement LED Bldg security light fitting LED 45 watt with SPD, PF not less or equal 0.9,epoxy coated cover sheet aluminium housing with heat resistant toughtened glass & IP 66 incl with bracket, clamps, nuts, bolts protection complete all as specified and directed and directed.
Cutting walls any type, making holes for fixing of exhaust fan of any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed
Supply and fix terminal box suitable three modular plate of size 100X75x50 mm including cutting, grooving and plastering etc. complete all as specified and directed.
All as per item No 141 but eight module plate of including cutting, grooving and plastering etc compete all as specified and directed
All as per item No 141 but twelve module plate of including cutting, grooving and plastering etc compete all as specified and directed
S&F LED tube light along with fixture including one number of 20 watt 4' LED tube complete all as specified and directed
S&F decorative wall mounted fancy light fitting made up of brass rubi lamp brand double handed item code 119598240 including of thred type bulb of 9-15 watts covered by glass complete all as specified and directed.
S&F LED gate light of 40 watt for existing gate complete all as specified and directed
S&F in repair MCB DB SPN (double door) 8 Ways 230 volts, double door type with minimum capacity of 200 amps rated including bus bar neutral link, earth bar and din rail, necessary dummy plate and civil works complete all as specified and directed.
S&F MCB SPN 230 volt, 6-32 amps capacity complete all as specified and directed
S&F single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.
S&F wall fan of 400 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/min with all accessories complete all as specified and directed.
S&F of electric chimney single phase 230 volts inclufing push control, baffle filter, metal blower, min suction power 800 cum/Hr, black powder coated with min size L-90 cm and all accessories including aluminium hose pipe 4/6 inch 8 mtr complete including cutting of holes wherever required and matching with the existing surface after fixing of chimney complete all as specified and directed. Note:- Aluminium hose pipe rate is including in the item rate and no extra payment will be done to contractor
Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in CM 1:3, and making good, cutting not exc 20 cm girth complete all as specified and directed
QUALITY CONSTRUCTIONS CO
M/S SHIVA CONSTRUCTION
m/s raghubar dayal
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .