NIT NO. 327/DURG(Mohla-Manpur-A.Chowki)/2026

NIT SCHEDULE FOR DEPOSITE WORK OF RESIDENTIAL / NON RESIDENTIAL BUILDING UNDER DIVISION OFFICE MOHLA -MANPUR- A.CHOWKI , DISTT- MOHLA-MANPUR-A.CHOWKI (CG)

AS PER PWD BUILDING SOR 10.06.2026

S.N Department SOR Year Item Code PARTICULARS QTY UNIT RATE AMOUNT

1 PWD BUIL 2026 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soil. 120.00 Cum 157.00 18840.00

2 PWD BUIL 2026 3.1.3 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 18.50 Cum 2525.00 46713.00

3 PWD BUIL 2026 3.2.1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete excluding cost of form work. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 33.50 Cum 3539.00 118557.00

4 PWD BUIL 2026 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 241.00 Cum 315.00 75915.00

5 PWD BUIL 2026 7.5.4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) 19.42 Cum 2774.00 53866.00

6 PWD BUIL 2026 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 15.000 Cum 83.00 1245.00

7 PWD BUIL 2026 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: Thermo-Mechanically treated bars FE 415 2850.00 Kg 46.00 131100.00

8 PWD BUIL 2026 2.1.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 275.00 Sqm 118.00 32450.00

9 PWD BUIL 2026 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape 155.00 Sqm 252.00 39060.00

10 PWD BUIL 2026 2.1.8 Beams, lintels, cantilevers & walls 75.00 Sqm 172.00 12900.00

17 PWD BUIL 2026 2.1.13 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for Weather shade, chhajja, Cornices and mouldings 4.62 sqm 250.00 1155.00

18 PWD BUIL 2026 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 42.10 Sqm 200.00 8420.00

11 PWD BUIL 2026 7.5.4+7.6 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 24.50 Cum 2857.00 69997.00

12 PWD BUIL 2026 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 385.00 Sqm 78.00 30030.00

13 PWD BUIL 2026 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) 280.00 Sqm 91.00 25480.00

14 PWD BUIL 2026 14.58 Providing and applying water proofing cement paint mimimum 2 coats applied @ 3.84 kg/10 sqm up to required finish as per relevant I.S. code 5410:2013 of required shade (product such as Snowcem plus, J.K. Shri Cement paints , century Cement Paints, Apex paints , Maxcoat cement paint ) with all tool tackles and labour etc. complete for the work . 360.00 Sqm 45.00 16200.00

15 PWD BUIL 2026 9.6.2 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 225.00 kg 58.00 13050.00

16 PWD BUIL 2026 9.40 Providing and fixing concertina coil fencing with required dia 610 mm (having 50 nos. round per 6 metre length) up to 3m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in-charge with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) 25.00 metre 139.00 3475.00

19 PWD BUIL 2026 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work. 0.27 Cum 3601.00 979.00

20 PWD BUIL 2026 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 33.49 Cum 55.00 1842.00

21 PWD BUIL 2026 7.11.2 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand) 3.99 Sqm 325.00 1297.00

22 PWD BUIL 2026 7.20 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. 3.99 Sqm 53.00 211.00

23 PWD BUIL 2026 8.151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. 15.40 Sqm 294.00 4528.00

24 PWD BUIL 2026 8.152.2 Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' cred on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter). Both side Pre-laminated panel PVC door shutter 7.56 Sqm 2407.00 18197.00

25 PWD BUIL 2026 11.1.2 Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) 155.00 Sqm 74.00 11470.00

26 PWD BUIL 2026 12.9.2 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. Size ABOVE 300x300mm 56.00 Sqm 619.00 34664.00

27 PWD BUIL 2026 12.7.2 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size ABOVE 200x300mm 32.00 Sqm 549.00 17568.00

28 PWD BUIL 2026 18.1.3 Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Orissa pattern W.C. pan of size 580x440 mm 2.00 Each 2,464.00 4928.00

29 PWD BUIL 2026 18.13.1 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back half stall urinal of size 460x380x250mm 4.00 each 1510.00 6040.00

30 PWD BUIL 2026 18.15 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe, standard size G.I. flush pipe for back and front flush, C.P. brass coupling complete including cutting and making good the walls and floors etc. wherever required : 4.00 each 1,712.00 6848.00

31 PWD BUIL 2026 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm 2.00 each 1,216.00 2432.00

32 PWD BUIL 2026 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 750.00 liter 6.00 4500.00

33 PWD BUIL 2026 19.13.3 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Stop cock (350 grams) 9.00 each 201.00 1809.00

34 PWD BUIL 2026 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) 7.00 each 325.00 2275.00

35 PWD BUIL 2026 19.16.1 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore 6.00 each 371.00 2226.00

36 PWD BUIL 2026 18.77.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 0.00

39 PWD BUIL 2026 18.77.2.1 Double "Y" with or without door 75 mm 12.00 each 110.00 1320.00

41 PWD BUIL 2026 18.77.3.2 Vent covel 110 mm 4.00 each 37.00 148.00

42 PWD BUIL 2026 18.77.4.1 Access door cap 75 mm 9.00 each 42.00 378.00

44 PWD BUIL 2026 18.77.5 "P" trap 110mmx110mm long 4.00 each 193.00 772.00

45 PWD BUIL 2026 18.77.6 Nahani trap 110x75mm 4.00 each 77.00 308.00

46 PWD BUIL 2026 18.77.7 Multi floor trap 110 6.00 each 104.00 624.00

47 PWD BUIL 2026 18.77.8 Plain reducing Tee 110x75mm 2.00 each 110.00 220.00

48 PWD BUIL 2026 18.76.1 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 75 mm dia pipe. 12.00 metre 155.00 1860.00

49 PWD BUIL 2026 18.76.2 110 mm dia pipe. 35.00 metre 227.00 7945.00

50 PWD BUIL 2026 19.4.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL 15 mm nominal outer dia .Pipes. 18.00 metre 94.00 1692.00

51 PWD BUIL 2026 19.4.3 25 mm nominal outer dia .Pipes. 45.00 metre 169.00 7605.00

52 PWD BUIL 2026 19.6.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK 25 mm nominal outer dia pipes 30.00 metre 140.00 4200.00

53 PWD BUIL 2026 19.6.5 40 mm nominal outer dia pipes 40.00 metre 255.00 10200.00

54 PWD BUIL 2026 19.52 Constructing masonry Chamber 60x45x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 2.00 metre 3,513.00 7026.00

55 PWD BUIL 2026 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. 2.00 each 1,453.00 2906.00

56 PWD BUIL 2026 12.3.1 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 40 mm thick 5.58 sqm 189.00 1055.00

57 PWD BUIL 2026 14.67 Providing and applying on exterior surface with ECONOMY Exterior Emulsion paint of required shades to give protective and water proof finish minimum three coats applied @ 1.43 lit / 10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -2 Class D , C ( Glossy /Semi Glossy finish ) (Product such as Asian Ace , Dulux Promise Exterior , Berger Wall Masta , Nerolac Suraksha Plus , Nippon Shogun Opus, One Style Power Bright) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work (With 2 Year Warranty) 86.14 Sqm 60.00 5168.00 Deleted

58 PWD BUIL 2026 14.61 Providing and applying Synthatic oil bound washable Distemper having VOC content less than 50gms/ lit. Minimum two coats up to final finish to give an even shade applied 1.25 kg / 10Sqm as per relevant I.S. Code 428:2000 (product such as Asian Tractor synthatic distemper , Berger Bison Lite , Dulux Magik , Birla Opus Style super smart) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. 40.52 Sqm 48.00 1945.00 Deleted

59 PWD BUIL 2026 14.72 Providing and applying Glossy finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian Apcolite Premium Enamel , Dulux Promise Premium Enamel , Nerolac Synthatic Enamel, Opus Prime enamel ) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the wor 11.10 Sqm 102.00 1132.00 Deleted

60 PWD BUIL 2026 9.3.2 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting,hoisting, fixing in position upto a height of 5m above plinth level,consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. Electric resistance or induction butt welded tubes Grade-300 220.00 Sqm 79.00 17380.00

61 PWD BUIL 2026 10.1.1 Providing corrugated G.I. sheet roofing including vertical/ curved surfaces fixed with galvanized iron, J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including painting with primer and paint on overlapping of sheets complete excluding the cost of purlins rafters and trusses. (Zinc coating not less than 272 gms/sqm) 1.00 mm thick sheet (weight 8.60 kg/m2) 62.00 Sqm 819.00 50778.00

62 PWD BUIL 2026 12.65.2 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm Pigment Coloured (rubber mould) precast interlock concrete blocks 148.000 Sqm 537.00 79476.00

63 PWD BUIL 2026 12.79.1 Providing and laying vitrified floor tiles with double charge/ multi charge printing with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size above Size 600x600mm . Size 600x600mm thinckness of 9 to 10 mm 83.32 sqm 920.00 76654.00

64 PWD BUIL 2026 12.49 25 mm thick KOTA stone slab flooring over 20mm (Average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. complete (Area of slab to be over 0.20 sqm and upto 0.50 sqm) 85.00 sqm 762.00 64770.00

65 PWD BUIL 2026 12.50 KOTA stone slab 25mm thick in risers and treads of steps, skirting dado and pillar laid in 12mm (Average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (single stone is to be used for riser and treads of steps and the width of stone for skirting and dado shall be equal to the height of skirting/ dado up to length of 1.0 M.) 15.80 sqm 842.00 13299.00

66 PWD BUIL 2026 12.51 Extra for nosing in steps and treads of Kota stone slab. 15.80 sqm 59.00 932.00

67 PWD BUIL 2026 12.7.2 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size above 200x300mm 65.88 sqm 549.00 36168.00

68 PWD BUIL 2026 12.9.1 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. Size 300x300mm 50.00 sqm 588.00 29400.00

69 PWD BUIL 2026 8.12.2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) 6.30 sqm 1,704.00 10735.00

70 PWD BUIL 2026 8.149.1 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. 24 mm thick door shutters with styles and rails of size 59x24 mm 6.72 sqm 2039.00 13702.00

71 PWD BUIL 2026 8.137.2 Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 250mm 8.00 each 194.00 1552.00

72 PWD BUIL 2026 8.138.1 Providing and fixing stainless steel door latch with 12mm rod, 2.5mm thick flap, necessary stainless steel screws etc complete. 300mm 14.00 each 79.00 1106.00

73 PWD BUIL 2026 8.139.2 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 200 x10mm 25.00 each 60.00 1500.00

74 PWD BUIL 2026 8.140.2 Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 125 mm 46.00 each 19.00 874.00

75 PWD BUIL 2026 8.144.1 Providing and fixing stainless steel fixed stopper with necessary stainless steel screws complete. 100 mm long 14.00 each 82.00 1148.00

76 PWD BUIL 2026 9.35.1 Providing and fixing approved pipe hand rail by welding to iron railing including applying a priming coat of red oxide zinc chromate primer. M.S Pipe 186.72 kg 68.00 12697.00

77 PWD BUIL 2026 9.57.1 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete. SS Grade 204 216.00 kg 397.00 85752.00

78 PWD BUIL 2026 14.60 Providing and applying of Acrylic primer on all surface applied @ 0.80 litrs/10 sqm as per relevant I.S. code 15489:1974 ( Product such as Asian Spark/suprimo , J.K. Primer, Dulux Acrylic Primer) with all tools tackles and labour etc. complete for the work. 1450.00 sqm 31.00 44950.00 Deleted

79 PWD BUIL 2026 14.57 Providing and applying 2mm thick white cement based Acrylic grade putty with minimum 3 coats applied @ 4.0 kg/ 10Sqm as per relevant IS code 17545:2021 (Product such as Asian trucare, Berger Happy walls Putty , Birla Opus One pro smooth) to make the surface smooth and even with all tools tackles and labour etc. complete for the work . (This Item to be use in heigher grade painting works Item No. 14.65) 1450.00 sqm 81.00 117450.00 Deleted

83 PWD BUIL 2026 8.1.2 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, khair, haldu 0.36 cum 51,893.00 18681.00

84 PWD BUIL 2026 8.4.3 Providing and fixing Dash fastener (for fixing door/ window frames) on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Dash fastener 12x100mm 36.00 each 33.00 1188.00

85 PWD BUIL 2026 8.6.2 Providing and fixing 40mm thick paneled or glazed or paneled and glazed shutter frames for doors excluding hinges and paneling. (Area of shutter to be measured without deducting paneling area) Bijasal, benteak, khair, haldu 12.00 sqm 1,503.00 18036.00

86 2026 4.22 Providing Water proofing treatment over Roof, Wall, Chhajjas, Balcony with Diamond Shield and Sealer coat or equivalent at leakage/ seepage area consisting of the operation: (i) Surface preparation roughening of surface, opening of cracks in ‘V’ groove in size of 5mm x 10m (WxD), filling of cracks with putty of Diamond shield with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/ Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii) Providing and applying 1st coat of diamond shield or equivalent compound (having two component dry powder 80% Chemical 20% (chemical having 30% solid contents) making flexible waterproof and protective modified mortar with minimum thickness 70-80 micron after proper mixing of both the parts of compound along with laying of fiber glass mesh (of weaving size of 10x10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd coat with minimum thickness 100 micron of the same compound. Allow the 2nd coat to set in natural air for minimum 4 Hrs. Total consumption of the diamond shield or equivalent in both coat should be @ 17.90 kg for 10sqm area. (iii) Over the above layers providing and applying 1st coat of sealer compound (Single component High Build elastomeric, flexible, pure acrylic waterproofing membranes having solid content of 65%) minimum 50-60 micron and allow it to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd and final coat 120-140 micron of sealer compound and allow it to set in natural air for minimum 4 Hrs. Consumption of Sealer compound should be @ 5.40 kg per 10 sqm area. The final area appearance of the coating will be milky white (iv) The treated area should be cure with water for 48 hrs by flooding the surface. All above operations to be done in order. The application shall be got done through the authorised applicator of the manufacturer. 120.00 sqm 358.00 42960.00

87 PWD BUIL 2026 19.7 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete: 0.00

88 PWD BUIL 2026 19.7.1 15 mm dia. nominal bore 38.00 Rmt 127.00 4826.00

89 PWD BUIL 2026 19.7.3 25 mm dia. nominal bore 45.00 Rmt 219.00 9855.00

90 PWD BUIL 2026 19.7.5 40 mm dia. nominal bore 26.00 Rmt 309.00 8034.00

91 PWD BUIL 2026 19.12.1 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. 15.00 each 158.00 2370.00

92 PWD BUIL 2026 19.12.3 25 mm nominal bore. 12.00 each 185.00 2220.00

93 PWD BUIL 2026 19.12.5 40 mm nominal bore. 6.00 each 230.00 1380.00

94 PWD BUIL 2026 19.14.14 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Soap dish plate 4.00 each 139.00 556.00

95 PWD BUIL 2026 19.14.16 Towel rail (600mm long x 20mm dia) 4.00 each 287.00 1148.00

96 PWD BUIL 2026 19.16.3 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 40 mm nominal bore 3.00 each 507.00 1521.00

97 PWD BUIL 2026 19.17.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore 2.00 each 367.00 734.00

98 PWD BUIL 2026 19.43 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Cutting holes more than 20x20 cm and upto 30x30 cm in walls including making good the same : 6.00 each 106.00 636.00

99 PWD BUIL 2026 18.76.2 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 110 mm dia pipe. 40.00 Metre 227.00 9080.00

100 PWD BUIL 2026 19.47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : 12.00 each 641.00 7692.00

101 PWD BUIL 2026 19.52 Constructing masonry Chamber 60x45x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand :10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 1.00 each 3,513.00 3513.00

102 PWD BUIL 2026 18.77.1.2 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm 21.00 each 131.00 2751.00

103 PWD BUIL 2026 18.77.2.2 Double "Y" with or without door 110 mm 16.00 each 190.00 3040.00

104 PWD BUIL 2026 18.77.3.2 Vent covel 110 mm 12.00 each 37.00 444.00

105 PWD BUIL 2026 18.77.4.2 Access door cap 110 mm 20.00 each 50.00 1000.00

106 PWD BUIL 2026 18.4.1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type 2.00 each 2,450.00 4900.00

107 PWD BUIL 2026 18.30.1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 5mm thick mirror 2.00 each 1,714.00 3428.00

108 PWD BUIL 2026 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. 2.00 each 1,453.00 2906.00

TOTAL 1695054.00

SAY RS 20.00 Lac

GENERAL ABSTRACT

ESTIMATE FOR DEPOSITE WORK OF RESIDENTIAL / NON RESIDENTIAL BUILDING UNDER DIVISION OFFICE MOHLA -MANPUR- A.CHOWKI , DISTT- MOHLA-MANPUR-A.CHOWKI (CG)

AS PER PWD BUILDING SOR 10.06.2026

S.No. Particular Detail Amount

1 ESTIMATE FOR DEPOSITE WORK OF RESIDENTIAL / NON RESIDENTIAL BUILDING UNDER DIVISION OFFICE MOHLA -MANPUR- A.CHOWKI , DISTT- MOHLA-MANPUR-A.CHOWKI (CG) AS ENCLOSED 169505400

AMOUNT 1695054.00

Say Rs.(in Lacs) 2000164.00

GOVERNMENT OF CHHATTISGARh PUBLIC WORKS DEPARTMENT

ESTIMATE FOR DEPOSITE WORK OF RESIDENTIAL / NON RESIDENTIAL BUILDING UNDER DIVISION OFFICE MOHLA -MANPUR- A.CHOWKI , DISTT- MOHLA-MANPUR-A.CHOWKI (CG)

ESTIMATE COST RS : 20.00 LACS

OFFICE OF THE EXECUTIVE ENGINEER

P. W. D. (B & R) DIVISION MOHLA-MAPUR-A.CHOWKI (C.G.)