GE863/EWS-T-55 OF 2023-24

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness inclduding cover fillets.complete all as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any positions as in framed work.complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for.complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each but with shutters (without taking off shutters from the frames).complete all as specified and directed.

M&L 25 mm thick cement concrete type B0 1:2:4 (12.5 mm graded aggregate) as in flooring complete all as specified and directed.

M &L for pre-cast cement concrete type C1 1:3:6 (20mm graded stone aggregate) as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:6, complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on brick or concrete surface of any description, finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and Labour for 15mm thick rendering on fair faces of brick work, concrete surfaces in cement mortar 1:4 mixed with WPC @3% by weight of cement or as per manufacturer’s instructions, finished even and fair, complete all as specified. (Note : WPC shall be measured and paid separately)

Supply only integral water proofing compound of approved brand/make.complete all as specified and directed.

M&L for 150 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone agg as in sub base of floor.complete all as specified and as directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L Vitrified Ceramic colour tiles light shade 10 mm thick(square/ rectagular) polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6, complete all as specified and directed.

M&L Vitrified Ceramic colour tiles light shade 10 mm thick(square/ rectagular) polished, as on vertical surfaces such as skirting, dados and rises to steps etc. over 10mm thick rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed

M&L 2nd class hard wood in scantling timber framed work fixed clean sawn directed complete all as specified and directed.

M&L 6 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in partitions/ shutters, ceiling etc., complete all as specified and directed.

M&L veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces, fixed with screws to timber frame work etc., complete all as specified and directed.

S&F Pre-Painted galvalume aluminum zinc coating, GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of oil bound distemper emulsion on surface of wall, complete, all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash on surface of wall, complete, all as specified and directed.

M & L for Rolled Mild steel in Stairs (spiral) framed, including stringers, treades, landings, balusters, hand rails etc., including cleats, brackets, etc., complete all as specified and directed.

S & F Mild steel works in framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balustes; walk ways;railings, framework of water tanks etc., and similar work confirming to Fe 290 grade E 165.

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed.

M&L for Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

M & L for PCC 1:4:8 type D-2, 100mm thick, using 40mm graded stone aggregate as in sub base, sub floors, floors and pavings,etc. complete all as specified and directed.

M & L for PCC 1:2:4 type B-1, 25mm thick, using 20mm graded stone aggregate as in surface of flooring finishing surface even and smooth without using extra cement all as specified and directed.

M & L for 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished even and rough, complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey pigment cement and pigments set and jointed in neat cement slurry and pointed in white or coloured cement, complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tile complete all as specified and directed.

M & L for Glazed ceramic coloured tiles of size 300 mm X 200 mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. over 10mm thick rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

S&F 15mm bore Galvanised steel tubes, 'medium grade' with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking out existing water closet (EWC), pedestal patternand replacing with new EWC (Pedestal pattern) cascade type with giazed flush tank, seat cover etc white including fixing bolts complete including making good to floor to match with adjoining surfaces all as directed. Make: JAQUAR or equivalent in hind ware/ Parryware/CERA as approved.

M&L in replacement vitrous china wash hand basin ,counter top Type ,code-JDS-WHT-25907N white from of Make Jaquar or Equivalant shall be provided over Granite platforms ,including waste pipe, waste coupling, brass CP trap P or S patern with inlet and outlet screwed for pipe connection and with one cleaning tap etc. Make: Jaquar, Hindware, Cera or equivalent.

S&F for ceramic urinal pot with inbuilt automatic urinal sensor, wall mounted , dual flush valve type of white colour of size -330x290x690mm complete including all fittings as per specified and directed.

S&F bib taps 15mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F Angle stop valve of PTMT any colour pressure screwed for iron pipe and fixed (15mm minimum weight 90 Gms) 15mm dia fixed to iron pipe, complete all as specified and directed.

S&F pillar taps 15mm dia, cast copper alloy, code-ORP-10021PM with capstan heads, chromium plated, screwed down high pressure, with Hot and cold mixer for WHB long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F for waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms), complete all as specified and directed.

S & F PVC connections 15mm size with PTMT nuts of length 600 mm, complete, all as specified and directed.

S&F cast iron floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

M & L for Gully traps salt glazed stoneware (SGSW) square or round mouthed type 'P' of size 180x100mm for drain pipes complete all as specified and directed.

S & F 75 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors, complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors, complete all as specified and directed.

S & F 75 mm dia bore PVC (SWR) bends any radius, complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) bends any radius, complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) junction single 'T' equal or unequal fitting, complete all as specified and directed.

S & F of 20 mm dia Aluminium anodised tubular towel rail including one pair of fixing brackets complete all as specified and directed.

S & F in repairs toilet paper holder, vitreous china box type fixed to wall with chromium plated brass screws,complete all as specified and directed.

S & F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

M&L Granite (of any type) ,tiles 18-20 mm thick machine cut ,bedded and jointed with grey cement slurry and pointed with white or coloured cement with admixture of pigment to match the shade of granite stone in flooring, including grinding and polishing over 20 mm thick screed bed in CM 1:6, complete all as specified and as directed.

M&L Granite (of any type) ,tiles 18-20 mm thick machine cut ,bedded and jointed with grey cement slurry and pointed with white or coloured cement with admixture of pigment to match the shade of granite stone in skirting/dado, including grinding and polishing over 10 mm thick rendering in CM 1:4, complete all as specified and as directed.

S&F looking mirror of size 1.5m long and 0.9m wide with fancy glass with decorative beading complete all as specified and directed.

M&L for decorative brass handles 200mm long fixed with screws washer nuts and bolts and necessary fittings complete all as directed.

Fixing only in repairs Vitreous China Ware Urinal partition slabs terminating about 40 cm above floor line.

S&F Hand Dryer smart flow material ABS finish white complete all as specified and directed. Make - Jaguar Cat Part No - HDR WHT - M04A or its equivalent in Hindware/Parryware.

Excavating in trenches n exc 1.5 m wide and n exc 1.5m in depth for foundation, etc. and getting out in loose/ soft soil etc., complete all as specified and directed.

M&L for cement concrete in foundations, filling and mass concrete in type D2 1:4:8 (40 mm graded aggregate) all as specified and directed.

M&L for RCC M-25 (20 mm aggregates) design Mix in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-25 (20 mm aggregates) design Mix in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC M-25 (20 mm aggregates) design Mix in beams, cantilevers, bresummers, lintels over 1.5m span, complete all as specified and directed.

M&L for Use and waste of formwork to sides of square/rectangular or polygonal pillars, posts, struts, piers, columns and stanchions for fair finished surface, complete all as specified and directed.

M&L for Use and waste of formwork to sides of concrete foundations, footings, bases of columns, rafts and rafts beams, sides and soffits (if any) of foundation and plinth beams and similar works vertical or to batter, flat fair finished surface complete all as specified and directed.

M&L for Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girdirs, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc., also splays between floors and beams, etc., flat fair finished surface, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to lengh bent to shape required including cranking, bending spirally for columns and including mild steel wire not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia cut to lengh bent to shape required including cranking, bending spirally for beams and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W including welidng cleats,distance pieces etc., complete all as specified and directed.

S&F for Rolled Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, complete all as specified and directed.

S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15 cm n exc 22.5cm long(dia of nec 16-20mm), complete all as specified and directed.

M &L for pre-cast cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar 1:6, complete all as specified and directed.

Material and labour for 40mm thick damp proof coarse in cement concrete (1:2:4) type B-0 (using 12.5 mm graded mechanically crushed stone aggregate) using water proofing compound ,to horizontal or vertical surface including use of necessary form work , complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on brick or concrete surface of any description, finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and Labour for 15mm thick rendering on fair faces of brick work, concrete surfaces in cement mortar 1:4 mixed with WPC @3% by weight of cement or as per manufacturer’s instructions, finished even and fair, complete all as specified and directed. (Note : WPC shall be measured and paid separately)

Supply only integral water proofing compound of approved brand/make, complete all as specified and directed.

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge

Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer?in-charge.

S & F Butt hinges medium weight, cold rolled mild steel, 125mm, ISI marked, fixed, complete all as specified and directed.

S&F 125mm long extruded aluminium anodised handles, fabricated type, complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 300mm long Aluninium alloy, anodised , sliding door bolt with hasp , staple,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F double legged door stopper of aluminium alloy with rubber complete all as specified and directed.

S&F 4.8 mm thick Sheet glass, ordinary quality and glazing if sheet glass is ground or obscured or frosted on one side fixing through glazing cleats in exc 0.5 sq.m in each pane, complete all as specified directed.

S&F 150mm hasp and staple, mild steel, wire type stove enamelled black, including bolt to hinge plate and fixed with screw, complete all as specified and directed.

S&F Anodised aluminum frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc., complete all as specified and directed.

S&F for 4mm thick sheet glass, ordinary quality and fixed with glazing clips and oil putty in squares exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F for 12 mm thick Toughened glass with stainless still 'U' Channel of 5 mm thick all around, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) along with compete fittings such as switches ,ceiling rose, pendent holder, sketch fitting & regulator etc. including making good to the disturbed surfaces of wall, roof and floor etc. to match with the existing surfaces complete all as specified and directed by Engineer-in-Charge.

Taking down unserviceable submain wiring and service cable alongwith batten / PVC conduits etc. and making good disturbed surfaces of walls/floors and match the existing surface complete all as specified and directed at site.

Taking down unserviceable main switches, DBs with MCB SP/Isolators by unscrewing form board complete all as specified and directed.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulated with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi standed copper conductor drawn through and including non metallic rigid PVC conduit with all conduit accessories (concealed)/ Casing and caping and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor, fabricated steel terminal box made out of 1.6 mm thick MS sheet concealed in walls with 3 mm thick bakelite sheet ISI marked top cover with brass screws and cup washers for housing the switches, socket outlets, fan regulators etc for One light / Exhaust Fan point controlled by one switch, all as specified and as directed.

All as per Srl item No 93 here-in-before but controlled with one 3 pin socket outlet 5 Amp on same board with other switches with cables 1.5 Sqmm complete all as per specified and directed.

All as per Srl item No 93 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge.

All as per Srl item No 93 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with cable 2.5 sqmm including provision of 1.5 sqmm single core multistanded PCV insulated copper conductor as earth conducting conductor complete all as specified and directed.

Supply and fix Modular switch 1 way 6A, 1 module type, 230 volts, ISI marked complete all as specified and directed.

Supply and fix Socket, 6A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix Socket 6A/16A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix Modular switch 1 way 16A, 1 module, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME White cover plate with frame, 3 module ISI marked complete all as specified and as directed.

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME White cover plate with frame, 4 module ISI marked complete all as specified and as directed.

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME White cover plate with frame, 6 module ISI marked complete all as specified and as directed.

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME White cover plate with frame, 8 module ISI marked complete all as specified and as directed.

Supply and fix MODULAR METAL FLUSH BOX 3 module, ISI marked, complete all as specified and as directed.

Supply and fix MODULAR METAL FLUSH BOX 4 module, ISI marked, complete all as specified and as directed.

Supply and fix MODULAR METAL FLUSH BOX 6 module, ISI marked, complete all as specified and as directed.

Supply and fix MODULAR METAL FLUSH BOX 8 module, ISI marked, complete all as specified and as directed.

Supply and fixing in replacement recessed mounted/ceiling downlight 36W with pressure die-cast aluminium housing for effective thermal management, high transmission factor PMMA diffuser for better performance and suitable driver, all as specified and directed. Make: Crompton. Cat No. LCTLRF7-36-WW or Havells - Cat No STRATO2X2PLR36WLED857MOD (Warm White) or Wipro - Cat No (Warm White) No.CRCO10R036HP57TLG2

Supply and fixing in replacment surface & wall mounted LED 20W (Warm white) tube light fitting batten 4 feet, mirrorlite slim type with extruded aluminium housing alongwith 20W LED lamp PC body with all accessories all as specified and directed. Make: Crompton Cat No. LDLL20-WW (Warm White) or Havells/Wipro/ Bajaj

Supply and fixing in replacment surface & wall mounted LED 5W tube light fitting batten mirrorlite slim type with extruded aluminium housing alongwith 10W LED lamp PC body with all accessories all as specified and directed. Make: Crompton Cat No.LDLL05-WW (Warm White) or equivalent

Supply and fixing in replacment surface & wall mounted LED 10W tube light fitting batten 2 feet, mirrorlite slim type with extruded aluminium housing alongwith 10W LED lamp PC body with all accessories all as specified and directed. Make: Crompton Cat No.LDLL10-WW (Warm White) or equivalent

Supply and fixing in replacment Recessed mount LED 3 watts downlight with in built LED driver, injection moulded housing and made of high translucent frosted optically efficent for anti-glare and smooth light distribution, complete all as specified and directed. Make-Crompton Cat No. LDRDLJ3-WW or equivalent

Supply and fixing in replacment Recessed mount LED 7 watts downlight with in built LED driver, injection moulded housing and made of high translucent frosted optically efficent for anti-glare and smooth light distribution, complete all as specified and directed. Make-Crompton Cat No. LDRDLJ7-WW or equivalent in havells Cat No. LHEEBPP5IL1W008 or wipro Cat No.D520727

Supply and fixing track mounted LED light 10 watts (warm white) with in built driver compact size, high power COB all as specifided and directed.

Supply and fixing 1 mtr Tracks for LED track mounted lights for ser item no 115 above all as specified and directed.

Supply and fixing 2 mtr Tracks for LED track mounted lights for ser item no 115 above all as specified and directed.

Supply and fixing wall mounted decorative LED lights with suitable LED bulbs, drivers, prewired and suitable nut, bolts and screws to fix on wall, all as specified and directed.

S&F in replacement PVC exhaust fan, Single Phase 300 mm sweep, with louvre complete all as per specified and directed.

S&F in replacement for Metal exhaust AC, Single Phase 300mm sweep 1400 RPM, complete all as per specified and directed.

S&F louvers suitable for exhaust fan steel body of 300 mm sweep, complete all as per specified and directed.

Supplying, laying, jointing & testing in replacement of cable XLPE insulated as per IS 7098 (Part-I)-1988, marked, screened, PVC sheathed armoured electric power cable ( heavy duty) with aluminium conductor for working voltage upto and including 1100 Volts croos sectional area 16 Sqmm 4 core with aluminium stranded, laid in trenches / fixed on pole / wall / passed through pipe complete all as specified and directed. Make : Havells / Polycab / Plaza / KEI / GLOSTER.

Supply,fixing, Testing water heater storage type with multifunctional safety valve, electric operated 230 V, Single Phase complete including one number of heating element, automatic, thermal cut out, fusible plug, anti vacum sys, built in presser release valve,thermostat, rust proof powder coated body, indicator lamps and all safety advices as per E-in-C's Branch technical instructions and of capacity 25 liters including provn of grouting bolts in walls including piller cock, pvc connection ect and making good disturbed surfaces, complete all as specified and directed. Make : CG/Racold/Havells/Bajaj/indo

Supply and fixing of sheet metal enclosure double door DBs Triple pole and neutral for 4 way 240 volt complete all as specified and directed.

Supply and fixing in MCB TPN 63 amps 415 V, complete all as specified and directed.

Supply and fixing MCB SPN 16-25 amps 230V, complete all as specified and directed.

S&F MCB SP 6 Amp to 32 Amp, 10 KA. all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground(earth pit not less than 2.25metres deep below normal ground level) with top edge of the plate not less than 1.5meter below normal ground level ,connected to and including using galvanized iron wire of 4.0 mm thick as earthing lead by means of bolts nuts, cheek nuts and washers of galvanized iron or steel .earth plate surrounded by alternate layers packed with charcoal dust and common salt ,15cm thick and 15cm wide all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel, wire mesh and 15mm dia GI protection pipe light grade all as shown in electrical plate no-3 of SSR part-I and connected to DBs, and including testing on completion all as specified and directed. Note: Suitable quantity of charcoal, common salt, funnel, GI pipe required for watering, pit & CI pit cover etc is deemed to be included in quoted rate and lead wire used beyond 7.5m from pit cover will be measured saparately.

Net Contract Sum will be after deducting Sch Of Credit of Rs. 50,805.44

R B TRADERS

M/S Gopal Singh