REPAIR, REPLACEMENT, MAINTENANCE OF WATER SUPPLY CI/GI PIPE LINE, VALVE, CHLORINE DOSING PLANTS, REPAIRING OF PIPE LINE AND DISTRIBUTION WITH CLEANING THE MAINS PUMPS, MOTORS ETS, VALVES AND ALLIED WORKS IN TECHNICAL AREA UNDER GE (I) R and D KANPUR

Amount

Excavation in trenches, for laying of pipe line not exceeding 1.5 mtr wide and not exceeding 1.5 meter in depth and getting out in soft/ loose soil complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/ loose soil complete all as specified and directed.

Removing excavated material n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed

Taking up cast iron water mains 250 mm bore (including all fittings) with spigot and socket ends and lead joints, including burning out joints and recovering lead complete all as specified and as directed.

All as per Item No 4.00 above but 200 mm bore

All as per Item No 4.00 above but 150 mm bore

All as per Item no. 4.00 above but 100 mm bore

M&L for centrifugally cast (spun) ductile iron pressure pipes 250 mm bore for water with socket & spigot ends confirming to IS 8329/2000 in any length for classification of K7suitable for rubber gasket push on with cement mortar lining inside the pipe with outside zinc coating complete all as specified and as directed .

All as per Item No 8.00 above but 200 mm bore

All as per Item No.8.00 above but 150 mm bore

All as per Item No.8.00 above but 100 mm bore

Relaying old CI pipe in new or old position retrieved vide item No. 04 hereinbefore including cleaning , cutting to required length etc. as per site requirement by using previously used and additional run lead , spun yarn including caulking to make the joints water tight complete all as specified and directed.

M&L for ductile iron special fittings such as bends (any type, radius and angle) tapers any type, (straight bend, increasing, decreasing or double socket etc) Tee pieces single branch. Y junction double branch cross (all sockets or socket and spigot) collers, caps and plugs for upto 150 mm bore in mm all as specified and directed.

All as per Item No 13.00 above but for 200 to 300 mm bore complete all as specified and directed.

S&F in replacement of double flanged sluice valve of size 200 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubbersheet nut, bolts and washers complete all as specified and directed.

S&F in replacement of double flanged sluice valve of size 150 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubbersheet nut, bolts and washers complete all as specified and directed.

S&F in replacement of double flanged sluice valve of size 100 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubbersheet nut, bolts and washers complete all as specified and directed.

Material & Labour to repair leakages through lead joints from existing CI pipe, fittings, tee, bends tail pieces, connecting pieces etc by using previously used and additional run lead , spun yarn including caulking to make the joints water tight including excavation works as required complete all as specified and directed for the following bore pipe line :-

(a) 250 mm bore

(b) 200 mm bore

(c) 150 mm bore

(d) 100mm bore

(e) 80mm bore

M&L for rubber gasket push on joint suitable for 100 mm dia spigot & socket ductile iron pipe & fitting complete all as specified and as directed .

M&L for rubber gasket push on joint suitable for 150 mm dia spigot & socket ductile iron pipe & fitting complete all as specified and as directed .

M&L for rubber gasket push on joint suitable for 200 mm dia spigot & socket ductile iron pipe & fitting complete all as specified and as directed .

M&L for rubber gasket push on joint suitable for 250 mm dia spigot & socket ductile iron pipe & fitting complete all as specified and as directed .

M & L for making run lead complete all as specified and directed for the following bore pipe line :-

(a) 250 mm bore

(b) 200 mm bore

(c) 150 mm bore

(d) 100mm bore

(e) 80mm bore

Supply & Fixed Gun metal Gate valve with iron wheel head conforming to IS : 778/ 1984, Class-1, Screwed both end , ISI marked including taking out the worn out/ old GI gate valve complete all as specified and directed suitable for following bore of pipes :-

(a) 20 mm nominal bore

(b) 25 mm nominal bore

(c) 40 mm nominal bore

(d) 50 mm nominal bore

Supply and fixing fire hydrant stainless steel, 65 mm dia single headed ane side flange complete all as specified and directed.

Supply and fixing ball valve /half turn valve 65 mm dia complete all as specified and directed.

M&L for cleaning of over head tanks by scraping/removing all funges, scales, dust, sludge etc from inside of the over head tank and depositing the same to a distance exc 50 mtrs and n.exc. 100 mtrs including washing the walls & bottom of the over head tank with water and disinfection chemical such as bleaching powder etc and writing date of cleaning, CA No and name of contractor with synthetic enamel black/white paint complete for 150000 gallons capacity complete all as specified and directed.

All as per item No 27.00 above but of capacity 50000 Gallon.

All as per item No 27.00 above but of capacity 10000 Gallon.

Supply & Fixing Single phase MCB Distribution Box, powder coated, matt finish with best CRCA sheet, of SPN 2 way, complete all as specified and directed.

Supply & Fixing MCB SPN, 6 to 32 Amps 240 volts, ISI marked complete all as specified and directed.

M&L for replacement of transmeter of digital water level indicator including all connections and making serviceable in all respect complete all as specified and directed.

M&L for replacement of receiver of digital water level indicator including all connections and making serviceable in all respect complete all as specified and directed.

M&L for replacement of sencer fitted at the top of over head reservoir of digital water level indicator including all connections and making serviceable in all respect complete all as specified and directed.

M&L for structural work fabricated from structural , steel section including nut,bolts,washers including cutting/ welding in any position, any shape and drilling hole for bolts in any size and shape as per site requirement or directed and inclusive of one primer coat of red oxide and one finish coatof synthetic enamel black paint complete all as per specified and directed.

Repairing/Servicing/Overhauling and testing of DG Set of capacity60/ 62.5 KVA for three phase supply at 415 VAC of any make at the site as per company specifications by highly skilled mechanic /technician in DG Sets or service engineer of original equipment manufacturer. The repair, inspection, servicing, overhauling, testing of DG Set shall be carried out as specified below and as approved by GE (I) R&D including repair/replacement of worn out/unserviceable spares. Note:- Spares will be measure seperately.

(i) any minor parts required to run smoothly is included in this rate

(ii) Check the Engine protection unit for proper functioning

(iii) Repair/over hauling of dynamo of DG set.

(iv) Cleaning of fuel tank of capacity of 60/ 62.5 KVA DG set including writing date of cleaning

(v) Taking out/down fuel injectors pump from DG set,repair and calibration of cpacity -60/ 62.5 KVA DG set.

(vi) Machining and polishing works of engine valve cylinder head valve facing sheet, including head facing complete in all respect and as directed.

(vii) Dismentaling of the radiator, cleaning with chemical and mechanical process reassembling with replacement of gaskets and cleaning of fins, tubes, core also and soldering on required leaked galleries. 60/62.5 KVA DG Sets.

(viii)opening of Engine of generating set including ,decaning of burnt oil from the oil sump and draining complete opening of head cover, tuning the engine by adjusting tappet, draining complete coolent, cleaning head,replacing the tattet cover, gasket, replacing the unserviceable parts, fuel filter, oil filter, CR elementy, filling the lub oil, cleaning the air filter element with compressed air complete servecing as per manufacturer instruction for DG set capacity604/62.5KVA Note:- Spares will be measure seperately.

Supply only fuel filter for 60/62.5 KVA complete all as specified and directed.

Supply only engine oil filter 60/62.5 KVA complete all as specified and directed.

Supply only air filter for 60/62.5KVA complete all as specified and directed.

Supply only of water pump assembly for DG set 60/62.5 KVA complete all as specified and directed.

Supply only of hose water p ump for 60/62.5 KVA complete all as specified and directed.

Supply only lub oil SAE 15W40 API complete all as specified and directed.

Supply only Water Temp.Gauge for 60/62.5 KVA DG SET complete all as specified and directed.

Supply only Valve seat ring ( inlet ) for engine 60/62.5 KVADG SET complete all as specified and directed.

Supply only Valve seat ring ( exhaust ) for engine 60/62.5 KVADG SET complete all as specified and directed.

Supply only Set of Hoses For 60/62.5 KVADG SET complete all as specified and directed.

Supply only Set of Hose clips FOR 60/62.5 KVADG SET complete all as specified and directed.

Supply only Set of 'O' Rings for 60/62.5 KVADG SET complete all as specified and directed.

Supply only Set of Gasket for 60/62.5 KVADG SET complete all as specified and directed.

Supply only Valve Cone (exhaust) for engine 60/62.5 KVADG SET complete all as specified and directed.

Supply only Gasket for exhaust pipe/manifold for engine 60/62.5 KVADG SET complete all as specified and directed.

Supply only Valve stem seal for engine 60/62.5 KVADG SET complete all as specified and directed.

Supply only Coolent for DG set 60/62.5 KVA complete all as specified and directed.

Supply only Asbostus rope suitable for exhaust pipe of DG set 60/62.5 KVA complete all as specified and directed.

Supply, fixing, connecting and testing in replacement of worn out battery by sealed lead acid battery, 12 Volt DC, 150 AH duly charged including replacement of copper connection lead of suitable size with terminal clamps complete all as specified and directed. Make:- Exide/Amco/Amron as approved by GE(I)

Supply & fixing in repair of digital panel mounted AC Amp meter, three phase in 96 x 96 mm square size, flush mounted case, accuracy class - 0.5 complete all as specified and directed .

Supply & fixing in repair of digital panel mounted AC Volt meter , three phase in 96 x 96 mm square size, flush mounted case, accuracy class - 0.5 complete all as specified and directed .

M&L for replacement of worn out /unserviceable pressure gauge 100 mm dia of suitable range with all necessary fitting etc to make serviceable condition complete all as specified and directed.

Taking out trolly mounted sewage pump of 15 HP capacity and re-fixing the same in its original position after over hauling including lath/ machine work for making housing of bearing , metaling ,welding, turing surfacing ,polishing of rotor shaft, and rethreading and replacement of , neck ring , bearing of required size , bushes, rubber insertion sheet , nuts, bolts and washers including necessary other items for its smooth functioning and testing complete all as specified and directed.

Supply & fixing in replacement of Foot valve 100 mm dia complete all as specified and directed.

Supply & fixing in replacement of Foot valve 80 mm dia complete all as specified and directed.

Supply and fixing in repair flexible PVC pipe 100 mm dia med grade fixing with clamps complete all as specified and directed.

Supply and fixing in repair flexible PVC pipe 80 mm dia with fixing clamps complete all as specified and directed.

Supply and fixing in repair worn out jubily clip 100 mm dia complete all as specified and directed.

Supply and fixing in repair worn out jubily clip 80 mm dia complete all as specified and directed.

Supply & fixing in repair Automatic Star Delta starter consisiting of ampmetre,voltmetre,indicator lamp,ON/OFF push button,TP MCB etc suitable for motor pump set of capacity 15 H.P. including making all electric connection complete all as specified. Make - Havells Cosmic star cat part -IHDASAP3*E / C&S/Bentex/ L&T ML 3F /BCH or any make as approved by GE (I)

Supply & fixing in repair Direct on line submersible pump starter consisiting of ampmetre,voltmetre,indicator lamp,ON/OFF push button, etc suitable for submersible motor pump set of capacity 1.5 KW including making all electric connection complete all as specified. Make - Havells Cosmic star cat part -IHDASAP3*E / C&S/Bentex/ L&T/BCH or any make as approved by GE (I)

Taking out/ lifting defective submersible pump setof 20000 GPH capacity with 41 HP motor from bore well including motor, column pipes, steel rope, submersible cable and accessories etc and depositing in AGE E/M store yard.

Lowering only submersible pump set along with motor, column pipes, steel rope, submersible cable and accessories etc after repairing including testing commissioning of submersible pump set of 20000 GPH capacity with 41 HP motor. Note: All spares required to make the motor, pumps, column pipe etc serviceable shall be measured and paid separately under relevent items as supply only including transportation to & from upto contractor workshop complete all as specified and directed.

Dismantling of pump motor set complete, (Taken out above/lying U/S in store yard of AGE E/M) cleaning all dismantled spares parts / winding for inspection of Engineer-in-Charge to ascertian the scope of work for repair/replacement of parts.

Rewinding of submersible motor, 41 H.P. 3 Phase, 50 Hz, 415 Volt with PVC insulated / coated copper winding wire of existing gauge with other winding material such as insulating paper, sleeves, bamboo stick etc. as per standard manufacturers specification including cleaning of stator, slots replacement of defective parts and testing complete all as directed . Note :- Spare parts other than winding shall be measured and paid separately.

Supply and fixing epoxy type cable jointing kit 16 Sqmm 3 core complete with all the jointing material ferrule insulation tape etc for 1100 Volts flat submersible copper conductor cable complete all as specified and directed.

Machining work required for repair to submersible pump set by straightning, polishing of pump shaft, making screw and key way, including replacement of wornout parts re-assembling pump after repair for smooth functioning of pump complete all as specified and directed. Note :- Fixing payment shall be deemed to be included in quoted rates.

Suppy only components/spare parts of existing discription and make for the submersible pumps and motors of capacity as under: -

SS impellers with key and distance bushes suitable for 20000 GPH

NRV for submersible pump set 20000 GHP

Bearing bush upper & lower for submersible pump for 20000 GPH

Neck ring for submersible pump set 20000 GPH

Distance sleeves for 20000 GPH.

High tensile nut bolts suitable for 20000 GPH pump

GM motor bush upper and lower (set of two) for 41 HP

Rotor bearing sleeve upper and lower for 41 HP

Coupling with key for motor pump for 41 HP

Sand Guard for submersible pump set for 41 HP

Housing upper & lower for 41 HP

Thurst bearing assembly for submersible pump set motor of 41 HP

Casing bearing for submersible pump set 41 HP

Bowl suitable for submersible pump set 41 HP

Supply only Flat water proof submersible cable 3 core copper conductor, PVC insulated 1100 volts grade stranded 16 Sqmm , ISI marked and connected to pump motor through water tight sealing joints complete all as specified and directed. Make: National Cables / Finolex / Havell's/Plaza

S&F in replacement of double flanged Non return valve of size 150 mm bore including replacement of worn out rubbersheet nut, bolts and washers complete. Make:- kirloskar/ upadhayay/ GDPA

Supply only M.S column pipe 150 mm dia 3.00 mtr long 7.0 mm thick both ends flanged duly welded on threads with ribs, surface of flanged shall be male/ female pattern to accommodate 2 mm thick packing including nut bolts and packing complete all as specified and directed.

Supply & Fixing ML - 3 Type three Pole Power contactor having 02 NC & 02 NO auxilary contacts, AC operated of coil voltage 230 Volt, 50 Hz AC 3 rating 40 A, ACI Rating 45A complete all as specified and directed.Cat no. SS90721 of Make - L&T or its equivalent in Havells/ Legrand/Schneider as approved by GE(I).

Supply & Fixing ML - 4 Type three Pole Power contactor having 02 NC & 02 NO auxilary contacts, AC operated of coil voltage 230 /415 Volt, 50 Hz AC 3 rating 70 A, ACI Rating 100A Cat no. SS90910 of Make - L&T or its equivalent in Havells/ Legrand/Schneider as approved by GE(I).

Collection of water samples from tube wells in sterilized bottle/cane of 05 ltr capacity and carrying bacteriological and chemical tests from lab (Govt. lab or any lab as approved by GE) and submit test reports to GE complete all as specified and directed.

M & L for installation, commissioning and testing of 415 Volt, 3 Phase, 4 Wire system LT Feeder Pillar Box, cubical indoor type fabricated with 2.0 mm thick CRCA sheet and shall be folded and braced as necessary to provide a rigid support for all components of external adequate size as per drawing of panel approved by GE(I) providing with handle, locking arrangement, based on suitable size of MS angle iron/channel complete with aluminium bus bars mounted on DMC suports and insulated with heat shrinkable PVC sleev, interconnection, control wiring with suitable size of copper conductor cable, name plate, danger plate, earth point, independent compartment with hinged doors, cable glands, weather & vermin proof construction powder coating etc including necessary excavation and PCC work complete all as specified and directed with and including comprising with the following:-

(ii) MCB TPN, 415 VAC, current rating - 63 Amps, 10 KA complete all as specified and directed. 01 nos. (iii) MCB SPN, 215 VAC, current rating - 32 Amps, 10 KA complete all as specified and directed. 02 nos.

M&L for fixing ventuary / orific plate arrangment made out of MS pipe 150 mm bore 7.0 mm thick 0.50mtr long(appx) including welding of flange at both endand four Nos. socket of 25 mm bore with fixing of nipple and gate valve of size 25 mm bore complete all as specified and directed by Enginner in charge.

Supply and fixing in replacement calcium hypo chlorite dosing system motor , Voltage input:230 volt, single phase, 50 Hz , 120 Watts including suitable PVC shaft complete all as specified and directed. Make : Declibac/ Hibird or equilavallent as approved by GE(I).

Supply and fixing in replacement of calcium hypo chloite dosing Pump High Pressure Adjustable dosing type with accessories includingLead Tubing, Connecting Nuts, Injection Check Valve, Clay Weight, andFerrules,complete all as specified and directed. Make- DECLIBAC/ HIBIRD or equivalent as approved by GE (I).

Supply and fixing in replacement of PE/FRP tank suitable for fixing calcium hypo chloite dosing Pump and motor including lid and level gauge complete all as specified and directed. Make- DECLIBAC/ HIBIRD or equivalent as approved by GE (I).

Supply and fixing in replacement Roller assembly suitable for calcium hypochloride Dosing pump complete all as specified and directed.

Supply & Fixing in replacement of weighted Suction Line Strainer 3/8 '' suitable forcalcium hypochloride Dosing Pump complete all as specified and directed.

Supply & Fixing in replacement of Injection Check valve 3/8 ''suitable for calcium hypochloride Dosing Pump complete all as specified and directed.

Supply & fixing in replacement of Pump tube suitable for calcium hypochloride Dosing Pumpcomplete all as specified and directed.

M&L for brick masonary Valve pit chamber of size 1200 x 1200x1200 mm (internal) complete with PCC(1:3:6) type C2 for foundation, brick work in CM(1:6),plaster CM(1:4) 15 mm thick on internal wall including pit cover frame made out of angle iron of size 40x40x6 and MS Plate 4.0 mm thick including provision of handel,locking arrangement ,hinges and dully painted two coat with synthetic enamell paint over a coat of red oxide primer ,making copping 100 mm thick complete with necessary earth work all as specified and directed.

Supply and fixing cotton hose pipe for fire hydrant 30 meter long including fixing accessories (SS) at both ends of 63 mm dia complete all as specified and directed.

M&L for replacement of worn out /unserviceable SS spindle along with gutaka of 150 mm dia sluice valve complete with gland and gasket complete all as specified and directed.

M&L for replacement of worn out /unserviceable SS spindle along with gutaka of 200 mm dia sluice valve complete with gland and gasket complete all as specified and directed.

VEE KAY ENTERPRISES