Loading
Loading…
Loading…
Tender Value
₹14.4 L
EMD Value
₹28,800
Closing Date
16 Dec 2025, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ELECTG
59 conditions · 14 needing a document upload
Whether Document verification certificate as per standard format uploaded
Whether electrical contractor's license, supervisor's license along with PAN Card of both contractor and supervisor uploaded.
Whether documents related to all mandatory requirements as mentioned in Clause no 5 & 6 of GCC part -I, Clause no 10, 11, 14, 15 & 16 of tender form 2nd sheet have been full filled and uploaded.
Whether documents relating to exemption of payment of EMD enclosed
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer should upload copy of the following documents self-attested / digitally signed by the tenderer or authorized representative of the tendering firm along with the tender. Tenderer(s) can use Standard formats available in the tender documents.
The list of personnel / organization on hand and proposed to be engaged for the tendered work. (Please refer Para-11(iii) of tender form 2nd sheet). Standard format attached as form no.5 in tender documents.
The list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work. (Please refer Para- 11(iii) of tender form 2nd sheet).
List of works on hand indicating description of work, contract value, approximate value of balance work yet to be done and date of award. (Please refer Para-10.1 of tender form 2nd sheet). Standard format attached as form no.3 in tender documents.
NOTE: Supportive documents/certificates from the organizations with whom they worked/are working should be uploaded. 2.3.1 Certificates from private individuals for whom such works are executed/being executed shall not be accepted. refer clause No.10.1 of IRGCC-2022.
The tenderer should upload the supportive documents against the i)'Type of Firm' as mentioned below: *Sole Proprietorship firm: Notarized affidavit claiming the firm to be a sole proprietor firm * Company: MOA, AOA, Power of Attorney, *Partnership Firm: Deed of Partnership, POA and ii) an undertaking for not being Blacklisted / debarred as per Annexure-A. NOTE: In case of partnership firm, they should submit individual declaration of all partners not being Blacklisted / Debarred as per Annexure-A, otherwise the offer of the tenderer will be summarily rejected.
Each partner of the partnership firm should duly submit the filled in Annexure-V separately as per IRGCC-2022; Otherwise, the offer of the tenderer will be summarily rejected. Firms other than the partnership firm have to submit it as before.
Please upload certificate (Annexure - V(A)) and is to be given by attorney/authorized signatory/ each member of Partnership firm/ Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc).
The tenderer should upload Declaration regarding "Employment / partnership etc. of Retired Railway Employees" (please refer to Para 16(a) of tender form 2nd sheet). (Use standard "Form no. 2", available in tender booklet).
The tenderer has to upload Declaration regarding relation with any Railway Employees. (Please refer to Para 16 (c) of tender form 2nd sheet). (Use standard "Form no. 6", available in tender booklet).
Should a tenderer or contractor being an individual, have member(s) of his family or in the case of partnership firm / Company / Joint Venture(JV) / registered Society / registered trust etc. one or more of his partner(s) / share holder(s) or member (s) of the family of patterner(s) / share holder (s) having share of more than 1 % in the tendering entity employed in gazetted capacity in the engineering or any other department of the Railway, then the tenderer at the time of submission of tender, will inform the authority inviting tenders the details of such persons.
The tenderer should upload certificate of familiarization as per Chapter -4. (Use standard "Form no. 7", available in tender booklet).
The tenderer should upload GST registration certificate and PAN card.
For all tenders having advertised cost of Rs. 10 lakh or above, the contractor shall have to submit the option to take payment from Railways through a letter or credit (LC arrangement. The tenderer shall affirm having read over and agreed to the terms and condition of the LC option. The option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, therafter, during execution of contract (The tenderer have to submit the option take payment fro Railway through a Letter of Credit arrangement).
The tenderer should upload the bank details i.e. Name of Bank along with Bank Branch Code, Account Number as appearing in the cheque book, IFSC Code and PAN Number, dully certified by the Authorized official of of the bank to facilitate payment through ECS/NEFT/RTGS. In lieu of the bank certificate photocopy /scanned copy of a cancelled cheque and PAN card may be attached for verification of the above particular, otherwise the offer of the tenderer will be summarily rejected.
Electrical works in connection with newly constructed TM siding at GBQ.
SBP-ELECT-2025-T-266~ECOR
SBP-ELECT-2025-T-266
Open
Works - General
6 Months
Sambalpur, Odisha
₹0
₹28,800
16 Dec 2025
24 Nov 2025
2 Dec 2025
71 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 14,40,187.97 | ||
| — | 2.00 | — | — | ||
| Supply of 11KV, 200A gang operated AB switch (Vertical type) complete. | — | — | — | 11,618.46 | |
| — | 2.00 | — | — | ||
| Erection, testing & commissioning of AB switch | — | — | — | 2,693.92 | |
| — | 2.00 | — | — | ||
| Supply of 11KV 50A/60A capacity expulsion type drop out fuses complete. | — | — | — | 4,382.84 | |
| — | 2.00 | — | — | ||
| Erection, testing & commissioning of drop out fuse | — | — | — | 887.08 | |
| — | 2.00 | — | — | ||
| Supply of Lightening Arrestor (1 set=3 nos) for 11KV 5KA | — | — | — | 5,534.16 | |
| — | 2.00 | — | — | ||
| Erection, testing and commissioning of Lightening Arrestor. (1 set=3 no) for 11KV | — | — | — | 1,279.7 | |
| — | 300.00 | — | — | ||
| Supply and laying of 63 mm dia DWC HDPE pipe (ISI marked) as per CPWD specification | — | — | — | 54,927 | |
| — | 1800.00 | — | — | ||
| Supplying and laying of 120 mm dia (OD-120 mm & ID-103 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. as per CPWD spec. | — | — | — | 4,67,532 | |
| — | 100.00 | — | — | ||
| Laying of HT/LT single cable across the road/Track as per Railway appd. drawing. | — | — | — | 48,922 | |
| — | 2200.00 | — | — | ||
| Laying of cable in air/on wall/pole / through GI Pipe/culvert/cable trench/HDPE pipe etc. | — | — | — | 55,704 | |
| — | 50.00 | — | — | ||
| Supplying & making of cable route marker as per item no. 7.9 of DSR 2018 | — | — | — | 21,258 | |
| — | 5.00 | — | — | ||
| Cutting of earth for plinth modifications/ boundary wall/concrete trench etc. | — | — | — | 979.65 | |
| — | 5.00 | — | — | ||
| Brick work with common burnt clay F.P.S. (non- modular) bricks of class designation 7.5 in superstructure above plinth level up to floor level in all shapes and size in: cement mortar1:6 (1 cement:6 coarse sand) | — | — | — | 29,471.5 | |
| — | 65.00 | — | — | ||
| 12 mm cement plaster of mix in ratio 1:6 (1 cement:6 fine sand) | — | — | — | 12,833.6 | |
| — | 1.50 | — | — | ||
| Providing of cement concrete 1:5:10 (1 cement:5 fine sand:10 graded stone aggregate 40 mm size) | — | — | — | 5,773.11 | |
| — | 10.00 | — | — | ||
| Supply & fixing of RCC cover for concrete cable trench of size 600x1000x75 (suitable for 450mmx450mm trench) | — | — | — | 6,145.7 | |
| — | 4.00 | — | — | ||
| Supply & fixing of 100 mm inner dia (medium grade) GI pipe | — | — | — | 4,055.56 | |
| — | 2.00 | — | — | ||
| Construction/ Modification of plinth with C.C (1:2:4) | — | — | — | 6,618.58 | |
| — | 4.00 | — | — | ||
| Supply & spreading of sand | — | — | — | 2,897.12 | |
| — | 8.00 | — | — | ||
| Supply & spreading of 25-40 mm size ballast in S/S | — | — | — | 12,609.92 | |
| — | 1.00 | — | — | ||
| Supply of outdoor feeder pillar/ Panel Board having 2x250A MCCB, 4pole,25KA as incomer, (electrically interlocked 400 A copper bus bar, multifunction energy meter in incoming, 2 X 100 A MCCB 16KA, 2x63 Amp MCCB 16KA as outgoing (For MCCB's Ics= 100% Icu) | — | — | — | 2,92,424.06 | |
| — | 1.00 | — | — | ||
| Supply of outdoor feeder pillar/ Panel Board having 100A MCCB,16KA as incomer, 200 A copper bus bar, multifunction energy meter in incoming, 3 X 40-63 A,4P, MCCB 16KA, 6x 40Amp MCB DP 10KA as outgoing (For MCCB's Ics= 100% ICu). | — | — | — | 76,687.54 | |
| — | 2.00 | — | — | ||
| Erection of LT Outdoor feeder pillar/panel of different size on wall or ground. | — | — | — | 7,643.86 | |
| — | 3.00 | — | — | ||
| Supply and erection of indoor type 3 phase Junction box with copper bus bar 63A capacity with 1x40A MCB 4P 10KA C Series as Incoming. (Approx sizesize-500x400x200mm) | — | — | — | 8,950.92 | |
| — | 6.00 | — | — | ||
| Supply & Erection of Outdoor type Junction Box with 1X63AMP MCB DP, 10 kA C series. Approx size 300mmx250mmx200mm). | — | — | — | 10,002.66 | |
| — | 2.00 | — | — | ||
| SITC of straight through jointing kit suitable for PVC/XLPE cable of size 3.5/4 core 50- 95 Sq mm. | — | — | — | 8,463.38 | |
| — | 20.00 | — | — | ||
| Provision of G.I pipe earthing as per CEE approved drawing. | — | — | — | 66,070.8 | |
| — | 60.00 | — | — | ||
| Supply & fixing of GI Flat. | — | — | — | 4,604.4 | |
| — | 15.00 | — | — | ||
| Supply of single arm GI Octagonal pole 6 mtr height complete | — | — | — | 1,17,732.9 | |
| — | 5.70 | — | — | ||
| Excavation of pit and concreting for erection of GI Pole | — | — | — | 18,171.2 | |
| — | 24.00 | — | — | ||
| Transportation & Erection of GI/SST pole | — | — | — | 5,882.4 | |
| — | 15.00 | — | — | ||
| SITC of Coil Earthing | — | — | — | 2,217.15 | |
| — | 15.00 | — | — | ||
| Supply of 45-watt LED streetlight complete | — | — | — | 30,926.7 | |
| — | 15.00 | — | — | ||
| Erection, testing & commissioning of LED outdoor fitting on SST/GI pole | — | — | — | 3,821.1 | |
| — | 1.00 | — | — | ||
| SITC of streetlight Panel complete with 32ATP Contactor,40A SPN MCB and astronomical timer conforming to IS/IEC-61439 & 60529 suitable for max load of 6 KW(single phase). similar to model no IHXSSO106A of M/s HAVELLS. | — | — | — | 30,465 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .