Repairing of PMCC Panel with other electro-mechanical works at P/H No-II of Aturia Water Supply Scheme in the district of 24 pgs.(N) under Eastern Mechanical Division Sub Division-I, PHE Dte. (SM Code-SM/01364)

Amount

Carrying charges of 1 no. 20 KVA Voltage corrector device (Make- ECS) from PH-I under Mathurapur W/S Scheme to PH-I, Aturia W/S scheme including hiring Charges of suitable Capacity 4(Four) Wheeler Truck and manual labour and loading unloading at both the ends complete (approx 60 km distance)

Making brick built foundation with supplying of all required materials suitable for the above Voltage stabilizer by (4:1) cement mortar including holding down foundation bolts(If required) and plaster with neat cement finish as per direction of E.I.C.

Installation of the above voltage stabilizer on the foundation including all connection complete as per direction of E.I.C.

100A, TP, 415V main switch in sheet steel enclose with neutral link rewireable porcelain fuse unit

100 Amp. 4 pole on load changeover switch

100 Amp. 4 bar Copper busbar chamber box by 16 SWG sheet steel enclosure including porcelain Chair etc.

25 sqmm. 4 core 1.1KV Grade, Al, Ar. PVC insulated cable (Make: As per approved vendor list.)

Fitting, Fixing and connection of above supplied changeover switch, bus-bar and Main Switch on the wall by supplying all necessary materials to complete the job.

Drawing and connection of cable on wall and all connection complete with all equipment as per requirement and as per direction.

Making joints of the cable by supplying compression type gland thimple, socket etc.as per requirement and as per direction of EIC.

Earthing with 50 mm dia. G.I. pipe, 3.65 mm thick & 3mtrs long (2 sets) and conn. by 25x 6 mm G.I. strip ( for reqd length) upto the earth bus-clamp with the equipments on wall/floor with staplesburied inside as reqd. at site and with 25 mm x 6mm GI flat strip to earth electrode pipe,fastening with 13mmx80mm G.I bolts,nuts,washers, including all f & f of materials & filling & restoring the surface by ramming &making suitable earthpit with brick structure & MS lid on top as per direction.

Making internal/external electrification of P/House by 2 x 1.5 sq.mm. P.V.C. cu wire through suitable size casing/capping for 4 nos. point ( 1 no. bracketpoint , 1 no. tube light point , 1 nos. bulk head point and 1 fan point ) and 1 no. 5A ,5 pin plug point with earthing attachment of 1 x 1.5 sqmm cu. Wire with supplying of tube light fittings (Make-As per approved vendor list.), fan(5* rating), bulbs as per approved make including suppying and fixing 10 A. DP MCB (As per approved vendor list.) make on wall all complete as per I.E. rules and direction. (including making external illumination by Supply & fixing of 1 no. 40W LED IP 66 type outdoor luminairie incl. Supply & installation of MS bracket & connection complete) (Make : As per Approved Vendor List.)

100 mm. Dia , 0-7 kg/cm2 range, wall mounted pressure gauge complete with brass stop cocks.(Make : As per approved vendor list.) Tubewell outside the pump house

Making suitable size pump foundation base & valve support with supplying cement, sand, stonechips etc. in the portion of (4:2:1) including plastering, neat cement finish etc. Complete as per direction of E.I.C.( Size: 1.00 mtr. X 1.4mtr.)The above base of tubewell is to be made with 250 mm. thickness brick wall on all side with 200 mm. thick F.C. slab on top including plastering and neat cement finishing.

Painting of the installation by two coats of enamel paints (colour to be decided by Department) over a coat of primer as per direction of EIC.

Repairing of PMCC Panel at PH-II of Aturia W/S scheme

Microprocessor based overload relay with phase failure and phase unbalance protections (Model BOCR 3DE, Make-ABB / EOCR 3DM2 Make- Schneider or Eqiuivalent)

Voltage monitoring relay 3ph 3W self powered (Make - Simens, 7UG0/Equivalent)

25 A TP MCB (Make-ABB/Eqiuivalent)

Digital Ammeter (Make-Risabh/AE)

Complete LED Indicating lamp 24V AC/DC, colour: Red /Green (ABB/ Equivalent)

Star-Delta Timer,3-120sec,240V,AC (Make-GIC, Model- Crono/equivalent)

24 Hr. Clock Timer (Make-GIC, Model- Crono/equivalent)

Repairing of the existing panel by fitting of the above supplied materials in existing position after necessary disconnection of power line and dismentling of the damaged or non serviceable spares, and by supplying all fixing materials such as FRLS Cu wire,screws, nut-bolts, washers, cable tie, pvc tape, sockets etc. as per direction of EIC

Add: GST @ 18%

Add: LWC @ 1%

BISALAXMI ENTERPRISE (BID ID -6824654)

DAS ENTERPRISE (BID ID -6824547)