REPAIR/REPLACEMENT OF JOINERY, WATER SUPPLY AND PLUMBING WORKS INCLUDING CERTAIN SANITARY FITTINGS OTHER MISC ALLIED WORKS IN STRAND LINE AREA UNDER GE (CENTRAL) KOLKATA.

Amount

Dismantling louvers and RCC jallies from any location and in any position up to four storied bldgs by hammaring carefully of concrete with necessary scaffolding and protection as required complete all as specified and as directed.

Dismantling Timber Scantlings, 40 Sqcm and over in Section, in any Position, in Unframed Work, complete all as specified and as directed.

Dismantling Timber Fillets, Rails, Posts, Rafters, Purlings, etc., under 40 Sqcm in Section, in any Position, as in framed Work, complete all as specified and as directed.

Taking down Chowkats or Frames, (without taking off Shutter from the Frame) exc. 1.50 Sqm but not exc. 4.00 Sqm Each, complete all as specified and as directed.

Taking down Chowkat or Frame (without taking off Shutter from the Frame) n exc. 1.50 Sqm complete all as specified and as directed.

Taking down Shutters of any description, not exc. 1.00 Sqm Each complete all as specified and as directed.

Taking down Shutters of any description, exc. 1.00 Sqm but not exc 2.00 Sqm Each complete all as specified and as directed.

Taking down and Re-fixing Shutters of any description exc. 1.00 Sqm and not exc. 2.00 Sqm Each in the Same Opening complete all as specified and as directed.

Taking down Alumium window and Ventilators of n.exc 1.5 Sqm including Grill/Guard Bars etc complete all as specified and as directed.

Taking down Old/Unserviceabe Steel Window /Ventilator of any type n.exc 1.5 Sqm including Grill/Guard Bars etc complete all as specified and as directed.

Dismantling Wrought Iron or Mild Steel Work, viz. MS Flat Iron (Wind Tie) , grill guard bar and Similar Work including MS Bolts, Nuts, etc., complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed.

Dismantling of stone slabs and tiles laid,bedded and pointed in any mortar of any description or thickness in floors, aprons etc all as directed by Engineer-in-charge.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debries/ rubbish, etc., complete all as specified and as directed.

Hacking Out Old Broken Glass (any thickness, size, quality or description) from Wooden Frames, Glazed with Putty or fixed with Beads, complete all as specified and as directed.

Taking up or down Steel Water Tubing 15mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Taking up or down Steel Water Tubing 20mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Taking up or down Steel Water Tubing 25mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

M&L Cement Concrete Type B1,1:2:4 (40 mm graded crushed stone aggregate) as in Holdfast Block including necessary form-work, etc., complete all as specified and as directed.

S&F 35mm thick precast cement concrete Type (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) louvers and jallies including all moulding, but excluding frame set in cement morter 1:4 complete all as specified and as directed.

M&L Second Class Hardwood in Scantlings clean sawn Timber Framed and fixed complete all as specified and as directed.

M&L Second Class Hardwood Plain Fillets sqaure, rectangular or triangular in section Clean swan, secured with Nails, cross sectional area exc 6.0 Sqcm but not exc. 13.0 Sqcm, complete all as specified and as directed.

S&F Second Class Hardwood Plain, Solid, Straight Chowkats and Frames, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue, Pinned at Joints, complete all as specified and as directed.

M&L 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

S&F Flush Shutters 30 mm thick, Solid Core Construction with Block Board Core and Plywood Face Panels, Commercial type on Both Sides, complete all as specified and as directed.

M&L 30mm thick glazed and skelton shutters, open rebated and prepared to receive glass , gauge, etc (without sash bars) , edges of framing plain, chamfered of rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkhats complete all as specified and as directed.

M&L Second Class Hardwood 30mm thick Glazed and Skeleton Shutters, open rebated and prepare to receive Glass, Gauge, etc. divided into Squares with Plain Chamfered or Rounded, mitred Sash Bars of any Numbers, Edges of Framing plain chamfered or rounded fitted with cut and mitred Beads for securing Glass, etc sizes of members of Shutter as speci fied in MES Schedule Part-I Section 8, Clause No. 8.20(b) and fitted to Wooden Chowkat, complete all as specified and as directed.

S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F Plain Colour Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing etc complete all as specified and as directed.

S&F Fixed type partly glazed, partly gauged. Solid PVC ventilator including 3mm thick frosted glass pane, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. glazing clip, fastener etc complete all as specified and as directed.

M&L Welding not exc 2.5 cm in length to steel windows, doors or any steel members not exc 6 cm thick as in repair complete all as specified and as directed.

M&L Mild Steel Flat Iron 25 x 3 mm, as in Holdfast for Door, Window Frames or Chowkats etc., cut to length or drilled hole and fixed with Screw, etc., grade of Steel conforming to Fe-290 Gde E-165, complete all as specified and as directed.

M&L Framed Work such as Grills, Gratings, etc. with ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed.

S&F Aluminium anodised (powder coated) Three track sliding window frame with shutters with ( 2 nos glazed and one wire gauzed shutter)including all necessary jointing cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete and glazing with and including 5 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc with the following section of frame and shutter (A) Sections for shutter (i) 'H' section 39 x 20 x 1.50 mm thick (ii) 'Interlock' section 39 x 20 x 1.50 mm thick (iii) 'Edge & Bottom' section 41 x 20 x 1.50 mm thick (B) Section for frame (i) Top & Sides 92 X 29.70X 1.50mm not less than 1.30 Kg /RM (ii) Bottom 92 X 29.70 X 1.50mm not less than 1.502 Kg /RM complete all as specified and directed .

M&L Steel Window with Side Hung Shutters including Projecting type Hinges with Steel Handle and Steel Peg Stay complete with Glazing Bars, dovetailed or welded, complete all as specified and as directed.

M&L Steel Window with Side Hung Shutters including Projecting type Hinges with Steel Handle and Steel Peg Stay complete without Glazing Bars, dovetailed or welded, complete all as specified and as directed.

M&L Steel Ventilator with frame ,top hung shutter including hinges, steel peg stay , complete all as specified and as directed.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples complete all as specified and as directed. NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples as in repair complete all as specified and as directed. NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included in the BOQ

S&F Aluminium alloy Handle 150mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed.

S&F Aluminium alloy Handle 100mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed.

S&F Aluminium alloy Handle 150mm long, Extruded Section, Fabricated type, anodized and fixed, as in repair complete all as specified and as directed.

S&F Aluminium anodized, Barrel Tower Bolt 200mm long, Extruded Section and fixed, complete all as specified and as directed.

S&F Aluminium anodized, Barrel Tower Bolt 200mm long, Extruded Section and fixed, as in repair complete all as specified and as directed.

S&F Aluminium anodized, Barrel Tower Bolt 150mm long, Extruded Section and fixed, complete all as specified and as directed.

S&F Aluminium anodized, Barrel Tower Bolt 150mm long, Extruded Section and fixed, as in repair complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and fixed, complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and fixed, as in repair complete all as specified and as directed.

S&F Stainless Steel Butt Hinges, size of Hinges 100mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed

S&F Mild Steel Butt Hinges, size of Hinges 100mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed

S&F Mild Steel Butt Hinges, size of Hinges 75mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed

S&F Hasp and staple 100mm size, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F Mild steel 300mm, ordinary helical door springs including roller and roller plate as in repair complete all as specified and as directed.

S&F 20mm dia brass chromium plated tubular curtain rod fixed with brackets, stops, rollers etc complete all as specified and as directed. Note:-Bracket shall be measured and paid separately under relevent item

S&F Chromium plated Bracket for fixing curtain rod in any size as in repair complete all as specified and as directed.

M&L Pre-laminated Particle Board 18/19 mm thick, interior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination fixed with Screws to Timber Frame Work as in cup board shelf ,Pelmet Box or in narrow widths not exc. 15 Cm each, rebated or flat edged, as in repair complete all as specified and as directed.

M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortar complete all as specified and as directed.

M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqm in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortar complete all as specified and as directed.

M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed.

M&L Glazed Ceramic Coloured Tile 300 x 200 x 7.0mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed.

M&L Granite (of any type) Work (Table rubbed and polished) 18 to 20 mm thick, in Steps, Cooking Platforms and like, Set in Screed bed of 20mm thick in Cement Mortar 1:4 including Pointing in White Cement 1:2 using Marble Dust with admixture of Pigment to match with Shade of Granite including Cutting and Polishing including half round edges, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:4 on other than fair faces of Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and Smooth without using Extra Cement complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and fair without using Extra Cement complete all as specified and as directed.

M&L for Preparation of new plastered surfaces and applying two coats of oil emulsion distemper (any colour/tint) over a coat of primer over 3 mm thick wall care putty (Birla/Asian) on wall surfaces including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

M&L Preparing new Surfaces of Walls and applying Two Coats of Cement Based Paint over a coat of alkali resistant primer complete all as specified and as directed.

S&F Sheet Glass 3.0mm thick ordinary quality glazing with Wooden Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed.

S&F Figured Glass 4.0mm thick, Pin Head / frosted type and glazing with Wooden Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed.

M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.

Supply and Laying Steel Water Tubing 15mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Supply and Laying Steel Water Tubing 20mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Supply and Laying Steel Water Tubing 25mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings4, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Relaying/Re-fixing Galvanised Steel Tubing 15mm Bore (dia) and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from Item No. 16 here-in-before) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush including Provision of New GI Fittings (as ordered), complete all as specified and as directed.

Relaying/Re-fixing Galvanised Steel Tubing 20mm Bore (dia) and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from Item No. 17 here-in-before) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush including Provision of New GI Fittings (as ordered), complete all as specified and as directed.

Relaying/Re-fixing Galvanised Steel Tubing 25mm Bore (dia) and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from Item No. 18 here-in-before) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush including Provision of New GI Fittings (as ordered), complete all as specified and as directed.

S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 1000 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe including Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed.

S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 500 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe including Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed.

S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 2000 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe including Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed.

Disconnecting existing tanks of capacity exc 250 ltr but n.exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed.

All as per item No.79here in before but PVC water tank capacity exc 1000 ltrs but n'exc 2000 ltrs.

All as per item No. 79 here in before but PVC water tank capacity exc. 500 litrs n.exc. 1000 ltrs.

S&F Stainless steel kitchen sink without drainage board of overall size 460mm x 405mm of bowl size 405mm x 354mm x203mm, made of 1mm thick stainless steel sheet with 32 mm CP waste coupling with brass cap rubber plug, connecting union 32mm bore PVC waste pipe (heavy duty) 90 Cm long, and bedded in cement mortar and fixed on brackets, as in repair complete all specified and directed. Make : Prayag Cat Part No. 1216D or equivalent in Nirali / Hindustan/ Neelkant .

S&F Stainless Steel Sink with Drainage Board l.0mm thick Overall size 914mm x 460mm and Bowl size 405 mm x 354 mm x 203 mm for Kitchen or Laboratory with Plugs, Washers, Brass chromium plated Waste Fitting 32mm dia, PVC waste pipe, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed. Make : Prayag Cat Part No. 1239D or equivalent in Nirali / Hindustan/ Neelkant .

M&L in petty repairs for (PVC Syphon assembly (internal kit)+ PVC washer+PVC clamps ,bracket for hanging with wall) for any type/size/make of low level flushing cistern,tightening of fittings etc & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed.

S&F 32 mm dia pvc flexible waste pipe fixed to WHB including all necessary fixing arrangement as in repair complete all as specified and directed. Make : Prayag or equivalent make as specified in Particular specifications.

S&F 32mm waste coupling of PTMT ( full threaded) minimum weight 45 grams for wash hand basin as in repair complete all as specified and directed. Make : Prayag (Cat No. 103) or equivalent make as specified in Particular specifications.

S&F 32mm dia PVC flush pipe of low or high density polyethylene pipe fixed to low level flush cistern including all necessary fixing arrangement as in repair complete all as specified and directed. Make : Prayag or equivalent make as specified in Particular specifications.

S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, 32mm dia Chromium Plated bottle trap and 15mm dia PVC connector pipe, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. Make - Parryware Model No-C0406(SP)/34(CTH)

Supply and fixing in repair 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as directed. Make : Cera cat part No CONGO B1010109 or equivalent model as specified in Particular Specification here in after.

Supply and fix in repairs Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor complete all as specified and directed. Make : Parryware Cat No C0123 or equivalent model as specified in list of approved makes given here in after in Particuler Specification.

S&F stainless steel kitchen rack of size 31"x36"x10" with 0.63mm stainless steel sheet with all fittings accessories as in repair complete all as specified and directed. Make : / Hindustan/ Prayag/ Nirali / Hindustan/ Neelkant .

S&F PTMT Ball Valve 20mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed as in repair, complete all as specified and as directed. Make : Prayag, Cat No 151 or equivalent model as specified in list of approved makes given here in after in Particuler Specification.

S&F PTMT Ball Valve 25mm dia having mini -mum weight 455 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed, as in repair complete all as specified and as directed. Make : Prayag, Cat No 153 or equivalent model as specified in list of approved makes given here in after in Particuler Specification.

S&F Chromium Plated waste coupling heavy full thread 32mm (brass) fixed to stainless steel sink including necessary fixing arrangement as in repair complete all as specified and directed. Make:- Essco or equivalent model as specified in list of approved makes given here in after in Particuler Specification.

S&F PTMT Grating Doom of 140mm size (Min weight 50 grms) and fixed-in-repairs, complete all as specified and as directed.

S&F Swivel shower 100mm dia with shower arm 15mm size,195mm long with bend of 45 degree with flange of PTMT any colouras in repair complete all as specified and directed. Make : Prayag (Cat No. 1814) or equivalent model as specified in list of approved makes given here in after in Particuler Specification.

S&F PVC water tank cover, fixed with mild steel nuts, bolts and washers of suitable size, as in repair, complete all as specified and as directed.

S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with "p" or "s" trap front or back inlet including fixing Bolts with and excluding 10 litre capacity low level Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat botton cover (coloured) fixed with mild steel chromium plated or aluminium hinging device and making good disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out unserviceable WC Pan and connected Items, complete all as specified and as directed. Make - Parryware Model No-C0297,C8090

S&F Bip tap with nozzle 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight15mm-95 gms) as in repair complete all as specified and directed. Make : Prayag (Cat No. 127-H) or equivalent make as specified in Particular specifications.

S&F Pillar taps fancy type15mm bore of PTMT any colour screwed for iron pipe & fixed. (min weight 15mm-120gms) as in repair complete all as specified and directed Make : Prayag (Cat No. 130-H) or equivalent make as specified in Particular specifications.

S&F Angle stop valve 15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-90gms) with PTMT flange as in repair complete all as specified and directed. Make : Prayag (Cat No. 144-H) or equivalent make as specified in Particular specifications.

S&F wall mounted Shelf of PTMT with chromium plated brass screws and wooden or plastic cleats minimum weight 300 grams as in repair complete all as specified and directed. Make : Prayag (Cat No. BEA-47A) or equivalent make as specified in Particular specifications.

S&F Towel rail 600mm long of PTMT with chromium plated brass screws and wooden/plastic cleats minimum weight 190 grams as in repair complete all as specified and directed. Make : Prayag (Cat No. 200A) or equivalent make as specified in Particular specifications.

S&F PVC connection pipe 15mm size with PTMT nuts of length 450mm long as in repair complete all as specified and directed. Make : Prayag (Cat No. 323) or equivalent make as specified in Particular specifications.

M/S SRINIVASA CONSTRUCTION

KWALITY CONSTRUCTION

SHEIKH ENTERPRISE

M/S L.R.ENTERPRISES

DGR CONSTRUCTION

UNITED ENGINEERS

SINHA ENTERPRISE