REPLACEMENT OF OLD DAMAGED MAIN CI PIPES LINES OF WATER SUPPLY WITH NEW GI/DI PIPES INCLUDING ALLIED FITTINGS AND MISC ITEMS AT RVC, CEMENTRY AREA, SARAGARHI AND OLD SS LINES AND OTHER MD ACCNS UNDER AGE E/M (WS),GE (U) E/M MEERUT.

Amount

Excavation in trenches in soft/lose soil n.exc. 1.5M wide & n exc 1.5M deep for laying of GI/CI pipe line & getting out including forming bottom surface all as specified and directed.

Excavation in trenches in Hard/dense soil n.exc. 1.5M wide & n exc 1.5M deep for laying of GI/CI pipe line & getting out including forming bottom surface all as specified and directed.

Returning, filling in, trenches including spreading, levelling, watering and well ramming in layer n.exc. 250 mm in any type of soil after the pipe laid & tested complete all as specified and directed.

Removing excavated surplus soil to a distance n.exc. 50mtr and depositing where directed at a level n.exc. 1.5 m above the starting point all as specified and directed

Disconnecting and taking up old existing GI pipe and connection of any description / grade and in any position of trenches / under floors/ on walls etc including connected fitting/ accessories and fixtures such as bend, Union, elbow socket etc. all as directed and specified for the following sizes :-

150mm dia

100mm dia

50mm dia

25mm dia

20mm dia

M & L special fitting class ‘B’ as per IS for Spigot and socket/pipes Bend(any radius and angle ) taper any type branches cross all sockets and spigot collar caps and plug upto 150mm bore complete all as specified and directed

Cutting of existing CI Pipes and reducing to required length before laying in position for insertion of new tees, branches etc complete for the following sizes all as specified & directed.:-

150mm dia/ bore

100mm dia/ bore

50mm dia/ bore

25mm dia/ bore

20mm dia/ bore

Making bore holes in GI pipe incl cutting of pipe where reqd for making any branch connection, repairing branch connection pipe with and including providing and fixing of suitable clamps of required size etc complete for following size.

50mm dia / bore

25mm dia/ bore

20mm dia / bore

S&F in repair including testing and commissioning of PPRC pipe PN 16 Mpa/SDR 7.4/S5 3 layer including fitting like elbow, union flange, Tee and bend etc complete of following sizes all as specified and directed by ENgr-in-charge.

50mm dia /bore

25mm dia/ bore

20 mm dia/ bore

160mm dia/ bore

110mm dia/ bore

M&L precast cement concrete type B-1 1:2:4 (20mm grade crushed stone aggregate) slab flooring, bedded, and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed

M&L 150mm nominal bore ductile iron pipes with spigot and socketed ends , centrifugally cast(spun) , class K9, in any length , externally coated with metalic Zinc Coating finished with bituminous paint and internally cement mortar lining laid in trenches/ fixed to walls or under floors etc. and testing complete all as specified and directed Note :- Excavation, earthwork and FI clamps shall be measured and paid separately

M&L 100mm nominal bore ductile iron pipes with spigot and socketed ends , centrifugally cast(spun) , class K9, in any length , exteranlly coated with metalic Zinc Coating finished with bituminous paint and internally cement mortar lining laid in trenches/ fixed to walls or under floors etc. and testing complete all as specified and directed Note :- Excavation, earthwork and FI clamps shall be measured and paid separately

Taking down old existing sluice valve and S & F new sluice valve 150mm bore PN-1.6 with stainless spindle conforming to IS-14846-2000 double flange with and including new flanged rubber joints complete including necessary nuts bolts with washer and rubber gasket complete all as specified.

Taking down old existing sluice valve and S & F new sluice valve 100mm bore PN-1.6 with stainless spindle conforming to IS-14846-2000 double flange with and including new flanged rubber joints complete including necessary nuts bolts with washer and rubber gasket complete all as specified.

S& F Galvanised fittings like TEE,Elbow,socket,union,reducer,nipple of suitable type for existing GI tubing of size up to 150mm for preventing leakage if any of making new branch connection complete all as specified and directed

Jain Traders

AEGIS INTERNATIONAL

Defence Auto Works

rajendra agrawal