GE/DE-55/2020-2021

Amount

Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, complete all as specified and as directed.

Replacement of point wiring complete with 1.5 Sqmm (nominal area) FRLS PVC insulated un-sheathed and multistranded copper conductor cable ISI marked in existing/new PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers including cutting & chasing and FRLS PVC insulated unsheathed 1.5Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing switches/sockets etc for one light point / fan point/ exhaust fan point / circulator fan point / bell/ buzzer controlled by one 1-way switch/ bell push, complete all as specified and as directed. (Note : The cost of Metal boxes and cover plates etc will be included in quoted rate.)

All as per description of Srl item No. 2 here-in-before but with 1.5Sqmm FRLS copper wire with 1.5Sqmm FRLS copper earth wire for one socket outet point 5 amps on the same board, complete all as specified and as directed.

All as per description of Srl item No. 2 here-in-before but with 1.5Sqmm FRLS copper wire with 1.5Sqmm FRLS copper earth wire for one socket outet point 5 amps on the independent board, complete all as specified and as directed.

All as per description of Srl item No. 2 here-in-before but with 2.5Sqmm FRLS copper wire with 1.5Sqmm FRLS copper earth wire for 15 Amp power point, complete all as specified and as directed.

All as per description of Srl item No. 2 here-in-before but with 1.5Sqmm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for one light point controlled by two nos of 2 way switch, complete all as specified and as directed.

Replacement of Switch piano flush type, single pole, one way, 5/6 Amps, complete all as specified and as directed.

Replacement of socket two-in-one, 5 pin, 5/6 Amp universal type, complete all as specified and as directed.

Replacement of Switch16 Amp,single pole one way, complete all as specified and as directed.

Replacement of socket out let 6/16 Amp, flush type, complete all as specified and as directed.

Replacement of Bell Push 6 Amp, flush type, complete all as specified and as directed.

Replacement of electronic fan regulator Piano type, in step and making all necessary connections, complete all as specified and as directed.

Replacement of electronic fan regulator Socket type, in step and making all necessary connections, complete all as specified and as directed.

Replacement of Switch piano flush type, single pole, two way, 5/6 Amps, complete all as specified and as directed.

Replacement of Modular switch 10 Amp, 1 way, 1 module size, complete all as specified and as directed.

Replacement of modular socket two-in-one, 10 Amp universal type, 02 module size, complete all as specified and as directed.

Replacement of modular Socket, 20 Amp, multipurpose shutter type, 02 module size, complete all as specified and as directed.

Replacement of Modular switch 20 Amp, 1 way, 1 module size with indicator lamp, complete all as specified and as directed.

Replacement of Modular Fan regulator step type, 120 watts, 1/2 Module size as per site requirement, complete all as specified and as directed.

Replacement of lamp holder PVC insulated body, complete all as specified and as directed.

Replacement of Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc., complete all as specified and as directed.

Replacement of electric bell of DINGDONG type, 6 Amps, 240 volts, single pole and making all necessary connections, complete all as specified and as directed.

Replacement of submain wiring complete with 2 x 4.0Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 2.5Sqmm as earth wire in and including PVC conduit of size 15 mm dia, medium grade and conduit fitting such as tees, bends, elbow, reducers etc., complete all as specified and as directed.

All as per description of Srl item No. 23 here-in-before but with 2 run of 6.0Sqmm FRLS copper wire with 4.0Sqmm FRLS copper cable as earth wire, complete all as specified and as directed.

All as per description of Srl item No. 23 here-in-before but with 2 run of 10.0Sqmm FRLS copper wire with 6.0Sqmm FRLS copper cable as earth wire, complete all as specified and as directed.

Replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection, complete all as specified and as directed.

All as per description of Srl item No. 26 here-in-before but of 40 to 63 amps capacity and SPN type, complete all as specified and as directed.

All as per description of Srl item No. 26 here-in-before but of 40 to 63 amps capacity and TPN type, complete all as specified and as directed.

Replacement of Modular AC Box incl Socket with 32 Amps SP MCB, 230 Volts, 50Hz, complete all as specified and as directed.

Replacement of modular MCB 32 Amp suitable for fixing in modular AC box, complete all as specified and as directed.

PVC casing & caping ( ISI marked) 20 mm dia for sub main inclusive of all fittings such as tees, bends, elbow, etc and all fixing accessories such as couples,Pvc Rawal Plugs, saddles, etc including making good surface as original by plastering and whitewash/ colour/ distemper etc., complete all as specified and as directed.

Replacement of PVC conduit of size 20mm dia with saddle, elbow, bend, Nails etc., complete all as specified and as directed.

Replacement of wall light fitting comet type with and incl 9 watt LED lamp, complete all as specified and as directed.

Replacement of LED mirror light fitting 10/12 watt, cool/warm white as per site requirement and making all electric connections, complete all as specified and as directed.

Replacement of LED ceiling light fitting 12 watt, in round shape, surface/recess type cool/warm white as per site requirement and making all electric connections, complete all as specified and as directed.

Replacement of LED bed side light, 5/6 Watts, wall mounted type and making all electric connections complete all as specified and directed.

Replacement of post top lantern light fitting dome round type suitable for gate light/garden light fitting incl necessary electric connections, complete all as specified and as directed.

Replacement of energy efficicent LED fittings upto 60Watt LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver, complete all as specified and as directed.

Replacement of street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint, complete all as specified and as directed.

Replacement of Ventilating fan 300 mm sweep plastic body type including self cosing louver and making all electric connections, complete all as specified and as directed.

Replacement of Ventilating fan 200 mm sweep plastic body type including self cosing louver and making all electric connections, complete all as specified and as directed.

Replacement of Wall Mounted Fan upto 400 mm sweep plastic body type including making all electric connections, complete all as specified and as directed.

Replacement of motor with threaded PVC cover suitable for 200/250mm fresh air fan with copper wound, complete all as specified and as directed.

PVC blade suitable for any type fresh air fan with copper wound, complete all as specified and as directed.

Motor with GI blade suitable for 9" exhaust fan with copper wound, complete all as specified and as directed.

Rewinding of exhaust fan/Fresh air fan/wall mounting fan of any size and make (250mm to 450mm sweep) with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge, complete all as specified and as directed.

Rewinding of Ceiling fan 1200/1400mm sweep with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge, complete all as specified and as directed.

PVC Gang Box suitable for one No 5 Amps Switch and one No 5 Amps Socket, complete all as specified and as directed.

PVC Gang Box suitable for two No 5 Amps Switch and two No 5 Amps Socket, complete all as specified and as directed.

PVC Gang Box suitable for one No 15 Amps Switch and one No 15 Amps Socket, complete all as specified and as directed.

Steel fastner of 4" long and 6mm dia with Nuts & washer, complete all as specified and as directed.

LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 22Watts, cool/warm white as per site requirement complete all as specified and as directed.

MCCB, 415 volts, three/four pole of cap 100 Amps, 25 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary Materials / thimble of suitable size and making connections, complete all as specified and as directed.

All as per description of Srl item No. 53 here-in-before but of capacity 125 Amps, 25 KA, complete all as specified and as directed.

All as per description of Srl item No. 53 here-in-before but of capacity 160 Amps, 36 KA, complete all as specified and as directed.

Replacement of 1100 volt heavy duty cable aluminium solid conductor served with inner sheathing of PVC tape and overall PVC sheathed twin core cable flat or circular of size 6.0Sqmm ISI marked in service connections, including taking down old unserviceble cable, complete all as specified and as directed.

All as per description of Srl item No. 56 here-in-before but with 4.0Sqmm ISI marked in service connections, including taking down old unserviceble cable, complete all as specified and as directed.

SReplacement of plug top 3 pin 10/20 amp earth metal clad suitable for industrial type DB, complete all as specified and as directed.

Replacement of socket 3 pin 10/20 amp earth metal clad suitable for industrial type DB, complete all as specified and as directed.

PVC top, 15 Amps, 230 Volts, 50 Hz, complete all as specified and as directed.

Replacement of Recess mounting 2x2 square flat panel ultra slim scoop LED light 36 W cool white 5600-6000K, input voltage 110-240 volt, 50 Hz with driver/transformer etc suitable for AS/GB/POP ceiling incl making electric connection, complete all as specified and as directed.

Replacement of LED lamp 9W,with base B22/E27, 230V, AC-50 Hz, warm/cool white as per site requirement, complete all as specified and as directed.

SReplacement of MS box of size 5"x5" to 7"x5", complete all as specified and as directed.

Replacement of Brass Machine screw with Copper washer of size 1" to 2", complete all as specified and as directed.

Replacement of 'T' cover Bakelite sheet 3mm thick in round shape, complete all as specified and as directed.

Replacement of Bakelite sheet 3mm thick of size 5"x5" to 10"x12" including cutting as per site requirement, complete all as specified and as directed.

Supply only PVC insulated unsheathed single core multistranded copper conductor wire of size 1.5Sqmm, 1100 volts grade cable, FRLS, complete all as specified and as directed.

Supply only PVC insulated unsheathed single core multistranded copper conductor wire of size 2.5Sqmm, 1100 volts grade cable, FRLS, complete all as specified and as directed.

Supply only PVC insulated unsheathed single core multistranded copper conductor wire of size 6.0Sqmm, 1100 volts grade cable, FRLS, complete all as specified and as directed.

Supply only PVC insulated unsheathed single core multistranded copper conductor wire of size 10.0Sqmm, 1100 volts grade cable, FRLS, complete all as specified and as directed.

Replacement of twin twisted flexible, PVC insulated, unsheathed, multistranded copper conductor wire of size 23/0.0076, complete all as specified and as directed.

Supply only PVC insullation tape roll of size 20mm width and 10mtr long, complete all as specified and as directed.

Supply and fixing Brass coating nuts & bolts with double washer 10mm dia and 30 to 45 mm long, complete all as specified and as directed.

Supply and fixing PVC rawal plug suitable for PVC casing/caping fixing, complete all as specified and as directed.

PVC Junction Pole box suitable for 40/50mm dia garden light pole with double aluminium clamps, Nuts, bolts & washer incl copper studs, MCB SP, 6 Amps & MCB SPN 32 Amps for SPN supply, complete all as specified and as directed.

Taking down old unserviceable LT U/G cable any size and core, complete all as specified and as directed.

PVC insulated armoured XLPE heavy duty U/G aluminium conductor cable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and overall PVC sheathed of size 6Sqmm 2 core, complete all as specified and as directed.

All as per description of Srl item No. 77 here-in-before but 10Sqmm, 2 core, complete all as specified and as directed.

All as per description of Srl item No. 77 here-in-before but 16Sqmm, 2 core, complete all as specified and as directed.

All as per description of Srl item No. 77 here-in-before but 25Sqmm, 4 core, complete all as specified and as directed.

All as per description of Srl item No. 77 here-in-before but 35Sqmm, 4 core, complete all as specified and as directed.

Excavation in trenches in soft / loose soil not exceeding 1.5 meter depth and not exceeding 1.5 meter wide and getting out including trimming of sides, complete all as specified and as directed.

Material and labour for brick protection to cable using old size class 'B' bricks, laid flat, dry butt jointed, laid lengthwise perpendicular to the axis of cable, complete all as specified and as directed.

Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and as directed.

Removal of excavated material to a distance exceeding 50mtrs and out of the MoD land snd depositing where directed not exceeding 1.5mtr above ground level, complete all as specified and as directed.

Plain Cement concrete 1: 3: type C-2 using 40mm graded crushed stone aggregates, in foundations, filling and mass concrete, complete all as specified and as directed.

Galvanised Steel Water tubing light grade of size 50mm bore, complete all as specified and as directed.

Industrial Switchgear Busbar Chambers, current rating 100 Amps, 4 Way with 04 Nos copper busbar, complete all as specified and as directed.

Industrial Switchgear Busbar Chambers, current rating 200 Amps, 4 Way with 04 Nos copper busbar, complete all as specified and as directed.

MCCB box suitable for fixing MCCB, 3/4 Pole Upto 400Amps, complete all as specified and as directed. Note : MCCB will be measured and paid separately.

MCB DB confirming to IP 43 - IK 09 with double door, SPN 12 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces, complete all as specified and as directed.

MCB DB confirming to IP 43 - IK 09 with double door, SPN 08 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces, complete all as specified and as directed.

MCB DB confirming to IP 43 - IK 09 with single door, SPN 04 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces, complete all as specified and as directed.

Replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections, complete all as specified and as directed. Note:- MCCB & MCBs will be measured nd paid separately

Replacement of TPN DB 04 way double door conforming to IP43 & IK 09 protection complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces, complete all as specified and as directed.

Replacement of aluminium lugs of size 10/16 Sqmm suitable for Aluminium/Copper cables, complete all as specified and as directed.

Replacement of aluminium lugs of size 25/35Sqmm suitable for Aluminium/Copper cables, complete all as specified and as directed.

Replacement of aluminium lugs of size 50Sqmm suitable for Aluminium/Copper cables, complete all as specified and as directed.

Replacement of electronic driver upto 36Watt suitable for LED Fittings, complete all as specified and as directed.

Replacement of heating element 2 KW capacity ISI marked any type for geyser of any type any size any model/Make in porcelain and other type and capacity including making necessary electric connections and testing the geyser, complete all as specified and as directed. Note : The petty items such as nut, bolt, clamps etc are deemed to be included in quoted rates.

Replacement of thermostat ISI marked for geyser of any type/Make and capacity as per sample, including making necessary electric connections and testing the geyser, complete all as specified and as directed.

Stainless steel Geyser tank 25/35 Ltr capacity suitable for fixing in 6/9 nut assembly, complete all as specified and as directed.

Stainless steel Assembly suitable for fixing on a geyser tank 25/35 Ltr capacity incl Nuts & rubber packing for water tight joint, complete all as specified and as directed.

Replacement of PVC connection, wire/strip armoured type 450/600mm long suitable for hot water connection with C P brass adopter 10 mm dia with washer for outlet pipe, ISI marked for geyser of any type/Make and capacity, complete all as specified and as directed.

Replacement of indicator lamp red/green ISI Marked suitable for geyser of any type/Make and capacity including making necessary electric connections and testing complete all as directed.

Replacement of ceiling fan 1200/1400mm sweep, Copper winding, 5 Star rating,white, 240 Volts. 50 Hz, complete all as specified and as directed.

SReplacement plastic body capacitor of capacity 2.5/3.15 mfd with wire suitable for single phase ceiling fan and making connection complete all as specified and directed

All as per description of Srl item No. 110 here-in-before but 4.0 mfd capacity, complete all as specified and as directed.

Replacement of ball bearing No 6201/6202 suitable for ceiling fan, complete all as specified and as directed.

Modular blank plate upto 12 module size as per site requirement, complete all as specified and as directed.

Candle lamp LED 3 Watts, B22/E14/E27, 240 Volts, 50 Hz ,cool/warm white, complete all as specified and as directed.

Replacement of PVC flexible pipe 25 mm dia, complete all as specified and as directed.

Replacement of PVC round/square block suitable for fixing of batten holder/ceiling rose in PVC casing & caping wiring, complete all as specified and as directed.

Replacement of bed switch pandent type, complete all as specified and as directed.

Replacement of bulk head fitting alluminium body with opal glass diffuser incl 9W LED Lamp, complete all as specified and as directed.

Replacement of batten holder E14/E27 brass body, complete all as specified and as directed.

Replacement of 15Amp Switch socket combination universal type with 6pin, complete all as specified and as directed.

AC single phase, 2 wire Temper proof, Static Meter of Class 1.0, 240 Volts, 50 Hz, basic current rating10-40 A, and LED display, billing data generation facility, anti-tamper features, complete all as specified and as directed.

AC 3 phase, 4 wire Temper proof, Static Meter of Class 1.0, 3x 240 Volts, 50 Hz, basic current rating10-60 A, and LED display, billing data generation facility, anti-temper features, complete all as specified and as directed.

NOTE:- For minimum fair wages, EPF and payment to labour employed, refer Sch A Note No-16,17 and Special Condition No 5 & 21.2 of this tender. Contractor must produce all the relevent record such as payment made to labour, EPF etc at the time of payment of RARs/Final bill. No payment will be released to contrator without producing the proper record.

M/s Shree Bala Ji Construction Company

aggarwal engineers contractors

M/s Shubh Enterprises