PART-A:- Improvement of staff quarters at BAB,TBT, BJA & LAR railway colony under ADEN/LAR. PART-B:- Replacement of existing pipe line from Govind sagar Dam to Main gate of dam at Lalitpur under ADEN/M/LAR sub division

1-Improvement of staff quarters 28614611.85 Below/P

2-Replacement of existing pipe line 7241819.50 Below/P

Item Breakup - 1-Improvement of staff quarters

pattern. 17.0 SANITARY INSTALLATIONS 17.1S General Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.1 manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of Each 10 6767.4 67674 69 size 580x440 mm with integral type foot rests JHANSI DIVISION-ENGG/NORTH CENTRAL RLY Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush 17.3 bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.2 W.C. pan with ISI marked black solid plastic Each 10 7874.3 78743 70 seat and lid Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm 17.7 C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.3 White Vitreous China Wash basin size 550x400 Each 15 2301.75 34526.25 71 mm with a pair of 15 mm C.P. brass pillar taps 17.8 Providing and fixing white vitreous china Each 15 1683.35 25250.25 72 pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, 17.10 including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.2 Kitchen sink without drain board 73 17.10.2.1 610x510 mm bowl depth 200 mm Each 10 4940.8 49408 Providing and fixing P.V.C. waste pipe for sink 17.28 or wash basin including P.V.C. waste fittings complete. 17.28.1 Semi rigid pipe 74 17.28.1.2 40 mm dia Each 72 116.7 8402.4 17.31 Providing and fixing 600x450 mm bevelled Each 10 1607.95 16079.5 edge mirror of superior glass (of approved 75 quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP 17.73 brass screws with concealed fittings arrangement of approved quality and colour. 17.73.1 450 mm long towel rail with total length of 495 Each 10 673.4 6734 76 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one 18.8 step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 77 18.8.2 20 mm nominal dia Pipes Metre 200 537.6 107520 JHANSI DIVISION-ENGG/NORTH CENTRAL RLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes 18.9 jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 78 18.9.2 20 mm nominal dia Pipes Metre 50 274.3 13715 Providing and fixing G.I. pipes complete with 18.12 G.I. fittings including trenching and refilling etc. External work 79 18.12.2 20 mm dia nominal bore Metre 200 368.6 73720 80 18.12.3 25 mm dia nominal bore Metre 100 467.75 46775 81 18.12.6 50 mm dia nominal bore Metre 100 762.15 76215 82 18.12.8 80 mm dia nominal bore Metre 50 1041.7 52085 Making connection of G.I. distribution branch with G.I. main of following sizes by providing 18.13 and fixing tee, including cutting and threading the pipe etc. complete : 83 18.13.1 25 to 40 mm nominal bore Each 20 911.9 18238 84 18.13.2 50 to 80 mm nominal bore Each 20 1785.35 35707 18.15S BRASS FITTINGS Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 85 18.18.3 25 mm nominal bore Each 45 464.05 20882.25 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : 18.21.2 45 cm length 86 18.21.2.1 15 mm nominal bore Each 15 97.75 1466.25 Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet 87 18.22.2 150 mm diameter Each 10 222.35 2223.5 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready 18.38 mixed priming coat, both of approved quality for new work : 88 18.38.2 20 mm diameter pipe Metre 150 23.25 3487.5 89 18.38.3 25 mm diameter pipe Metre 100 30.25 3025 90 18.38.6 50 mm diameter pipe Metre 100 51 5100 Providing and fixing G.I. Union in G.I. pipe 18.46 including cutting and threading the pipe and making long screws etc. complete (New work) : 91 18.46.1 15 mm nominal bore Each 20 318.35 6367 92 18.46.2 20 mm nominal bore Each 10 346.8 3468 93 18.46.3 25 mm nominal bore Each 15 439.25 6588.75 94 18.46.6 50 mm nominal bore Each 10 823.8 8238 95 18.46.8 80 mm nominal bore Each 20 1207.95 24159 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass long body bib 18.51 cock of approved quality conforming to IS standards and weighing not less than 690 gms. 96 18.51.1 15 mm nominal bore Each 8 798.95 6391.6 Providing and fixing C.P. brass angle valve for 18.53 basin mixer and geyser points of approved quality conforming to IS:8931 97 18.53.1 15mm nominal bore Each 10 574.3 5743 18.54S PTMT FITTINGS JHANSI DIVISION-ENGG/NORTH CENTRAL RLY Providing and fixing PTMT grating of approved 18.58 quality and colour. 18.58.1 Circular type 98 18.58.1.1 100 mm nominal dia Each 50 37.6 1880 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. 21.1 Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 150 495.05 74257.5 99 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 150 598.6 89790 100 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Total 28614611.85

Item Breakup - 2-Replacement of existing pipe line