8783REPAIR TO ROOF FLOORING SANITARY FITTINGS PLASTERING MISC WORKS WATER PROOFING TREATMENT SUNKEN FLOORS AND TOILETS IN OTM MD ACCN AND CONNECTED ITEMS IN DOMESTIC AREA GANGAMMA CIRCLE IN EAST AREA UNDER GE M AF JALAHALLI BANGALORE

Amount

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames) and all as specified and directed.

Taking down shutters of any description exceeding 1Sqm and not exceeding 2 Sqm each.

Supply and fixing Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification & drawing and direction of Engineer-in-Charge.

Supplying & fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, Supplying & fixing in the frame at site, complete all as specified.

Supplying & fixing Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with wood free EPS with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, Supplying & fixing in frame including hinges as per site requirement all as specified.

Supplying & fixing 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

Supplying & fixing 150mm Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

All as per item No 07 here in before but 100mm dia

Supplying & fixing Extruded Aluminium alloy handles, fabricated type, anodised 150mm long

All as per item No 9 here in before but 100mm

Supply and fixing 100 mm long Stainless steel Butt hinges extruded.

Supply and fixing 125 mm long medium weight MS Butt hinges extruded.

Supplying & fixed in repair stainless steel wire cloth of 0.36mm dia of wire and average width of aperture 1.40mm with staples or old serviceable fillets complete as directed by EIC

Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and Supplying & fixing sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including necessary new oil putty or with existing metal beadings complete.

Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and, Supplying & fixing Figured glass 3mm thick pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane and securing with new oil putty and providing and fixing new metal beadings complete.

Supply and fix 5 mm thick plain glass pane to the existing aluminium window/ door of any size including necessary rubber gasket and aluminium clips etc complete including taking down old broken glass pane complete including taking down old one and all as specifeid and directed.

Demolition of Concrete (un reinforced) of any description and in any position not otherwise specifically provided for .

Dismantling of floor, hearth or wall tilling including cement mortar bedding (but not backing) and removing rubbish off from premises.

Material and labour for 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes under floor and all as specified and directed.

Material and labour for rendering 10mm thick in CM 1:4 as in backing coat to receive wall tiles skirting/dado/vertical surface complete all as specified.

Material and labour for 10mm thick coloured vitrified tiles (Square/rectangular ) polished ,area of each tiles not exce 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

All as per item No 21 hereinbefore but in skirting including necessary cutting of tiles.

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and all as specified and directed.

Material and labour for Glazed ceramic coloured tiles of size 300x200mm/450x350 x7 mm thick in vertical surface, set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles laid over bedding layer complete all as specified.

Material and labour for cement concrete 1:3:6 type C-2, 75 mm thick using 20mm graded stone aggregates as in plinth protection finished fair and even with out using extra cement all as specified and directed.

Racking out joints / points in cement mortar to squared rubber masonry coursed or uncoursed

Material and labour for Keyed pointing in CM 1:4 to random or polygonal rubble, uncoursed or brought upto courss and all as specified and directed.

Taking down cement plaster or cement lime plaster on brick walls etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified.

Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces on external surfaces finished even and smooth without using extra cement and all as specified and directed.

Material and labour for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as internal surfaces of walls.

Material and labour for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement and all as specified and directed.

Material and labour for distempering walls with two coats of washable distemper oil emulsion on new surfaes over a coat of alkali resistant priming paint (white or tinted) as directed of distempered and painted surfaces as in preparatory work to give uniform and smooth finish all as specified.

Material and labour for two coats of cement based paint over a coat of primer on newly plastered surfaces of wall including necessary preparation and all as specified and directed.

Material and labour for three coats of whitewash on new surfaes of ceiling including necessary preparation to give uniform and smooth finish all as specified.

Material and labour for 2mm thick wall putty on walls including complete removal of existing removal of existing any type of treatment.

Supplying & fixed in repairs brass mortise lock (6 levers), vertical type, size 100mm long complete all as specified and directed .

Supplying & fixed in repair door closer Aluminium die cast body hydraulically regulated, designation No. 1 universal type, suitable for door shutter complete all as specified and directed .

Supply and fixed in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Taking down defective aluminium door with glass panes and repairing floor stopper, bearing alignment etc. including replacement of any item required for proper functioning and refixing in the same position.

Material and labour for Providing cement concrete 1:1.5:3 screed 25mm concrete mix admixed with fosroc nitoband or equivalent make at 2% by weight of cement, and cleaning the prepared concrete surface an applying Fosroc Nitoproof (Min 0.8mm dft) over a priming coat of Nitoproof Primer or equivalent products.

Taking Down existing water proofing treatment with tar felt including cement plaster/HP tiles/ concrete from roof or wall surfaces such as parapets/RCC fins etc and disposal of the rubbish from the premises beyond 250m complete all as specified and as directed.

Material and labour for PCC padding average 50mm thick to be provided in slope PCC 1:2:4 type B-1 using 20mm graded aggregate.

Material and labour for 10 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding/under WPT) with WPC all as specified and directed.

Material and labour providing cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in bands, copings, bed plates, kerbs, water froughs and the like including weathering slightly rounded or charmfered angles and throating complete all as specified and directed by EIC.

Material and labour for water proofing treatment on horizontal and vertical surfaces, Applying oil bound bitumen primer @ 0.20Kg/Sqm and providing 4mm thick APP modified waterproofing membrane weighing not less than 4.0 kg/Sqm reinforced with non woven polyester matt weighing not less than 160 gm/Sqm ,including minimum 10cm side over lap and 15 cm end lap , incl another coat of hot blown bitumen 85/25 @1.2kg/sqm applied over membrane and finally finished with two coats of aluminium paint and all as specified and directed and testing complete on completion.

Taking down up or down steel/plastic/cpvc water tubing and connection including cleaning for re-fixing or removal from site complete all as specified.

All as per Srl item No 46.00 above but 20mm bore.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and fixing of 20mm outer dia Female Brass Threaded Adaptor (FTA/ FBTACPVC complete all as specified.

Supplying and fixing of 20mm outer dia CPVC brass elbow and all as specified.

Supply and fixed in repair 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

Supplying & fixed in repair angular stop valve 15 mm chromium plated concealed, fancy type screwed down high pressure screwed both ends for iron pipe for 15 mm bore.

Supply and fixed in repairs Bib taps fancy type chromium plated with crutch or butterfly handle screwed down screwed for galvanised iron pipe or for brass ferrule and fixed complete for 15 mm bore

Supplying & fixed in repair Bib tap cast copper alloy suitable for 15mm bore pipe with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule all as specified

Supply and fixed in repairs pillar tap with capstan heads chromium palted screwed down high pressure with or without letter 'Hot' or 'Cold' with long screwed shanks and flynuts screwed for galvanised iron pipe and fixed complete for 15 mm bore

Supply and fixed repairs for CP brass health faucet alongwith flexible pipe and stay complete of approved make all as specified and directed.

Supplying & fixed in repairs coloured PVC toilet cabinet of size 355x455x90mm with looking mirror in replacement of existing looking mirror/wooden cabninet and repairing the disturbed surfaces to match with existing of approved make.

Supply and fixed in repairs viterous china wash down water closet (Pedestral pattern) EWC white including plastic water closet seat cover and mild steels chromium plated on aluminium hinging device and connecting to 'P' or 'S' including connecting flush pipe with flushing rim all as specified

Supplying & fixed in repairs Vitreous china squatting pan "Orissa pattern" size 580x440mm white with intergal foot rests (excluding flushing cistern and flush pipe) complete including provn of lime concrete bedding and making good to floor as in repairs all as specified.

Supply and fixed in repairs PVC low level flushing cistern 10 Ltr capacity including necessary brackets incl connecting flush pipe etc and making good the disturbed surfaces all as directed

Supply and fixed in repairs viterous china wash basin white flat back size 550 x 400 mm including brackets, waste coupling etc all as specified and directed

Supply and fixed in repairs wall mixture incl three joints to steel pipes of 15 mm bore and plugging & screwing to walls and making good the disturbed surfaces of walls to match with existing surfaces all as directed Make: Jaquar

Supply and fixed in repairs PVC flexiable pipe (Connecter) 15 mm dia, 450/650 mm long with check nut and bolt with washer all as specified

Supplying & fixed in repairs PVC waste pipe 32/40mm bore for WHB & Sink

Supply and fixed of in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

Dismantling of cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings.

Supply and fix PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 75 mm with PVC clamps and saddles including taking down existing pipes.

Supplying & fix 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls complete all as specified and directed.

Supply and fix PVC (SWR) bends of any radius with access door bore of pipe 75 mm

Supply and fix PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm

All as per item No . 71 herein before but bore of pipe 110 mm

Supply and fix 125/ 110 mm bore PVC (SWR) floor trap plain with grating incl jointing with solvent cement

Supplying & fix PVC (SWR) bends 75mm bore any radius all as specified & directed.

All as per item No.74 herein before but bore of pipe 110 mm with access door

Supply and fix PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm

Supply and fix PVC (SWR) branch piece, single(single Y) equal or unequal with access door bore of pipe 75mm

Supply and fix PVC (SWR) branch piece, single (single Y) equal or unequal with access door bore of pipe 110mm

Supply and fix PVC (SWR) branch piece, double (double Y) equal or unequal with access door bore of pipe 110mm

Supply and fix PVC (SWR) WC connector bent pipe/reducers 110 mm

Supply & fix PVC (SWR) Vent cowl 110mm

Material and labour for post construction Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes of 12mm dia etc. in apron and all as specified and directed

Material and labour for post construction Anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same and all as specified and directed

Dismantling boarding, any description, fixed in any position with nails

Supply & fix 12 mm thick plywood, grade 1 (with BWR resin) with decorative face 4mm veneers on single face; fixed with screws to timber frame work

Material and labour for 6mm thick Plywood grade BWR type BB fixed with nails to timber frame work and all as specified and directed.

Supply and fix of auto hinges of standard size for cupboards

Supply and fix 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish or electrogalvanised.

Supply and fix 40mm dia, brass cupboard knobs fixed with nut, screw and washer

Supply and fix 140mm ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in and fixed

Supply and fix brass Drawer handles, projection drop (50mm to 65mm) on screwed plate long and all as specified and directed.

Supply and fixed in repairs floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor and all as specified and directed.

Supplying & fixed in repairs MS chromium plated 25mm dia heavy duty curtain rods and all as specified and directed.

Supply & fix stainless steel fancy type curtain brackets and all as specified and directed.

Supplying & fixed in repairs Bib tap standard of PTMT of any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms

Supply and fixed in repair tubular towel rail brass chromium plated 20 mm dia 'D' type 60 cm long between flanges

Supply & fix in repair grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms).

Supplying & fixied 125mm bore brass CP grating of approved design fixed with white cement complete as directed including taking down old one.

Supply and fixed in repair shower rose chromium plated 120 mm with or without swirel joints including fixing to steel pipe of 15 mm bore

Material and labour for cleaning the existing tiles joints and filling the tiles hollow joints with white cement including grouting of floor trap surroundings with white cement to the entire satisfaction of the Engr-in-charge.

Supply & fixed in repair spindle of any size for tap,angle/stop valve all as specified and as directed.

Supply and fixed in repairs Stainless steel Plate rack 900mm x 600 mm x 200mm deep with plate racks, spoon holders, shelves etc complete

Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including taking out old steel sink and fittings with cement beadings and demilition of supports etc and making good the destrubed surfaces all as directed.

Dismantling of existing unserviceable water tank and removing, (Capacity 500 Ltr and n. exc. 1000 Ltr) complete all as specified

Dismantling of existing unserviceable water tank and removing, (Capacity 250 Ltr and n. exc. 500 Ltr) complete all as specified

Supply & fix rotational moulded polythene water storage tank, cylindrical vertaical with closed top, hoisted and fixed in position, 1000 Ltr capacity incl tank nipple complete all as specified and directed

Supply & fix rotational moulded polythene water storage tank, cylindrical vertaical with closed top, hoisted and fixed in position, 500 Ltr capacity incl tank nipple complete all as specified and directed

Supplying & fixing for 8 feet 4 pipes pulley operatoed cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of lemgth 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg, minimum weight of rope shall not be less than 7700Gms/unit (for 04 pipes).

Material and labour for taking down of existing sunken slab treatment from the sunken portion and removing of existing filling of sunken, cleaning the surfaces washing down with water and rubbish off the primises, cleaning and filling cracks with sealing compound, brushing neat cement [email protected]/sqm and providing 25mm thick cement concrete type B-0 (1:2:4) (using 12.5mm graded stone aggregate) on sunken slab portion.. (b) Material and labour for two coat of acrylic cementitious water proofing coating (Dr FIXIT pidfin 2K manufactured by M/S Pidilite industries Ltd or equivalent) and followed by a overlay protective rendering 15mm thick CM(1:3) alongwith liquid water proofing compound approved make and including filling of brick bats and finishing the top surfaces even and smooth without using extra cement .(c) sunken slab after prepration as mentioned above method of application for acrylic cementitious water proofing coating is followed as per manufacturs instruction complete all as specified and directed.

Material and labour for Non skid ceramic coloured tiles 7 to 8 mm thick (squre/rectagular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles complete all as specified.

Material and labour for 15mm thick screed bed or bedding layer of cement mortar (1:6) as in floor for laying floor finishes complete all as specified.

Material and labour for 25mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in floor to receive tiles complete all as specified and directed.

Three coats of white wash on new surfaces of walls including preparation of surfaces complete all as specified.

Supply & fix 15mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified.

All as per Srl item No 115.00 herein before but 20mm bore.

Supply & fixed in repair PVC connection 15mm bore 45 cm long with two PTMT nuts and washers complete all as specified.

Demolition and bracking up 100/75mm dia drain pipes (Salt glazed ware, AC, PVC or cement) set in cement mortar all as specified and directed.

Dismantling wrought iron or mild steel work of any description all as specified and sirected.

Supply & fix MS tubes/Square bars/Angle square bar iron using various sections such as poles, rafters, purlins ladders and cleats as directed by Engineer-in-Charge and all specified and directed.

Material and labour for prepration of new steel surface and iron work of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide and all as specified and directed .

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nanital or similar pattern roof coverings and all as specified and directed.

Supply & fix Pre-painted galvalume aluminium zinc coating GI based trapezoidal profile roofing sheets 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively, profile hieght 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any hieght complete all as specified and directed.

Supply & fix 100mm size butt hinges, medium weight cold rolled mild steel mild steel medium weight

chowdeshwariconstructionco

SRI GANESH ENTERPRISES

BYRAVESHWARA CONSTUCTION

SRI LAKSHMI VENKATESHWARA ENTERPRISES

Maruthi constructions