Nala Repair work From bandiya Kunwa to Kabrishtan towards.

Reinforcement for R.C.C. work at all levels including 23.19.6 straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars

Random rubble stone masonry work in cement mortar with mechanical mixer in foundation (at any level) complete as per drawing and technical. specification and as per clause 1000 and 1400 of MoRT&H specification including all scaffolding material, labour, machinery but excluding pointing and plastering, in cement mortar 1:4 (1 cement:4 coarse sand)

Providing and laying un-reinforced, plain cement concrete mix with Concrete Mixer & vibrator pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to 15: 383, maximum sire of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints etc including all material, labour, machinery, lighting, guarding and maintenance of diversion.PCC M-25

Centring and shuttering with plywood or steel sheet upto two stories (each story of height upto 3.5 metre from floor level) including strutting, propping etc. and removal of form for Foundations, footings. bases of columns, etc. for mass concrete

Cement plastering including T&P, scaffolding. material and complete labour, including cost of water, curing, racking of joints etc. with 12 mm cement plaster of mix: including Providing/mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed 0.25% by weight of Cement Le. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/mortar. 1:4 (1 cement: 4 fine/coarse sand)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work upto plinth level:1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)

Providing and fixing of reinforced Ferro-Cement drain covers designed for 'AA' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted M.S. plate, Rim and 1.00 M.5. lifting hooks, Admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc.Standard Size 1000x800mm (100mm thick) for span 451 to 700mm.

Providing at site, lowering & laying in trenches, aligning & jointing of RCC pipes NP3 class (with s/s ends) 15:458-1988 (amended up to date] marked and pipes from 300 mm upto 2000 mm manufactured through vertical/vibrated casting process all levels with Rubber gaskets (EPDM/SBR) for sewer lines as per 15: 5382 (including cost of Rubber gaskets lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost metre