Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.3 LAccepted-AOC A 14 USHA SADAN NEAR POST OFFICE COLABA MUMBAI 05 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC L1 | |
| 2 | L2₹30.5 L+₹14,920 (0.49%)Rejected-Finance | L2 | Rejected-Finance Not Reasonable | |
| 3 | L3₹30.6 L+₹23,965 (0.79%)Rejected-Finance 46 HUSENI LAKDA BAZAAR 242 BELLASIS ROAD MUMBAI 400008 | MUMBAI | MAHARASHTRA | 400008 | L3 | Rejected-Finance Not Reasonable | |
| 4 | L4₹30.9 L+₹55,320 (1.82%)Rejected-Finance 5 6 MINTO ROAD ALLAHABAD 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L4 | Rejected-Finance Not Reasonable | |
| 5 | L5₹31.7 L+₹1.3 L (4.44%)Rejected-Finance NOT AVAILABLE | L5 | Rejected-Finance Not Reasonable |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
20 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Saurabh Gupta, EE
GE(W) Colaba, Mumbai
REPAIRS TO ROOF SHEETING, CHAJJS AND CEILING FOR MD AND OTM ACCN OF AREA II UNDER AGE B/R CENTRAL AT COLABA, MUMBAI.
2023_MES_607089_1
8784/E8
Open Tender
Civil Works
Item Rate
180 days
GE(W) Colaba
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE(W) Colaba, Mumbai
₹90,000
Yes
12 Aug 2023
30 Jun 2023
22 Jul 2023
30 Jun 2023
20 Jul 2023
13 Jul 2023
Amount
Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land all as specified and directed. Note : Height of Bldg Up to fourth floor.
Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land all as specified and directed. Note : Height of Bldg above five Up to Eight floor.
M&L for 18-20 mm thick ready mix plaster in multy layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished surfaces even and fair, including use of scaffolding, for height of bldgs upto Four stories all as specified and directed.by Engr-in-Charge. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.
M&L for 18-20 mm thick ready mix plaster in multy layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished surfaces even and fair, including use of scaffolding, for height of Bldg above five Up to Eight floor all as specified and directed.by Engr-in-Charge. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.
M&L for 12 mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, on other than fair faces of concrete surfaces in wall (internal surface) and finished surfaces even and smooth without using extra cement all as specified and directed by Engr-in-Charge. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.
M&L for Firstly old loose spelled concrete should be chiseled from roof ceiling with the help of scrapers chisel & hammer after that cleaning of rust from mild steel rod and applying cement spry 3.00 Kg per sqm by paint brush over cleaned surfaces and M&L for 20-25 mm thick ready mix plaster in Multi layer for ceiling on fair faces of brick wall or concrete surfaces, finished surfaces even and fair including three coats of white wash all as specified and directed by Engr-in-charge
M&L for plastering 12 mm thick average Polymer modified mortar (ready mix pack) in finishnig coat after guniting, finishing the surfaces even and smooth without using extra cement, curing and removing the debris outside MD lands per manufacturer's instruction all as specified and as directed. Note;- Rate of polymer included in the quated rate. Make : Dr. Fixit RepairPro Polymer Mortar, Fosroc RENDEROC S2 structural grade polymer mortar, ShaliFix FRM Polymer Modified Fiber Reinforced Mortar of STP or equivalent as approved by GE
M&L for preparation of newly plastered surface of wall/ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE .
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land all as specified and directed.
M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6 all as specified and directed.
M&L for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from Ground floor upto 04 storeys height of bldgs all as specified and directed. Make: "Apex Ulitima" of Asian Paints "trucare" Primer / "Weather coat all Guard"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE.
M&L for preparing old plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from Ground floor upto 04 storeys height of bldgs all as specified and directed. Make: "Apex Ulitima" of Asian Paints "trucare" Primer / "Weather coat all Guard"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE.
M&L for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from 5th floor upto 08th storeys height of bldgs all as specified and directed. Make: "Apex Ulitima" of Asian Paints "trucare" Primer / "Weather coat all Guard"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE.
M&L for preparation of old plastered or unplastered surface of wall including cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and and applying two coats of acrylic Elastomeric water proofing coating Make : Dr fixit rain coat WPC/ equvqlient to Asian Paints) through authorized applicator only including use of scaffoldings all as specified and directed. Make and colour as approved by GE complete all as specified and directed. Note : Up to fourth floor.
All as per item No. 14 above but 5th to 8th floor all as specified and directed. Note : from fifth floor and above
M&L for a coat of wall Putty 0.5 mm thick (average after finishing) as per manufacturer's instruction on wall surfaces all as specified and directed.
M&L for preparation of old surface of wall and applying two coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre over a coat of primer coat through authorised applicators of paint manufacturers only of approved shade all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE .
Dismantling asbestos cement (corrugated, semi corrugated) sheets in roof coverings including ridges all as specified and directed.
Dismantling of timber in scantlings 40 Sqcm and over in section, in unframed work in any position all as specified and directed.
Dismantling of battens for tiles, shingles of any size including tilting fillets exc 15 cm spaced all as specified and directed..
Dismantling of boarding, any description, fixed in any position with nails all as specified and directed..
M&L for IInd class hard wood clean sawn boarding 15 mm thick with butt joints in any situation except flooring & skirting all as specified and directed.
S&F for Rolled mild steel sections conforming to Gde Fe-290 (Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates all as specified and directed.
S&F plain/Chequered plates (Fe 410-w Gde E 250) quality A, mild steel plate as in staircase landing and tread/bridging sheet including necessary welding all as specified and directed.
S&F in repairs stainless steel grade 304 (square/ round / rectangular ) of suitable gauge as in gaurd bars / railing /frame work including all fixing arrangement including taking down of old of any type railing all as specified and directed.
S&F in repairs mild steel work such as grills, gratings with the ends of bars shouldered and/ or riveted or formed into spikes framed guard bars, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work, rail & similar fixing with bolts where required conforming to grade E165 as per IS 15911: 2010 all as specified and as directed.
S&F in repairs Aluminium composite panel sheet 3mm thick PVCF wooden or plain finished of brand name 'Euro bound'/"Alstrong"./ "Viva" fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required cilicon & screw as in ceiling/coloumns and in vertical surface all as specified and directed,approved sample as kept in GE Office.
M&L multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume corrugated/manglore steel sheet having maximum pitch of 250mm, c/c and minimum 30mm crest depth in length as per site requirement. The feed material is to be manufactured out of 0.50mm (TCT). Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with total mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal or fixed with 'L' or 'J' type or cranked hook bolts in roof all as specified and directed by Engr-in-charge.
M&l multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume plain steel sheet as in ridges/ hips/ valley gutter and flasingh. The feed material is to be manufactured out of 0.50mm (TCT). Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with total mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal or fixed with 'L' or 'J' type or cranked hook bolts in roof all as specified and directed by Engr-in-charge.
M&L for preparation of new untreated steel surface of any description exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.
M& fibre glass reinforced translucent corrugated sheeting 2 mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall all as specified and directed.
Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 15/20 mm or more bore all as specified and directed
S&F tubes medium grade galvanized iron with all fittings and fixed to walls and ceilings or laid in floor for 15 mm bore all as specified and directed
S&F tubes medium grade galvanized with all fittings and fixed to walls and ceilings or laid in floor for 20 mm bore all as specified and directed
S&F UPVC pipes out side dia 15 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors all as specified and directed
S&F UPVC pipes out side dia 20 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors all as specified and directed
S&F UPVC pipes out side dia 25 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors all as specified and directed
Demolition and breaking up drain pipes (SGSW, AC or RCC, CI ) of internal dia 75/110 mm, set in cement mortar all as specified and directed.
S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 110mm bore all as specified and directed.
S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 75 mm bore all as specified and directed.
S&F PVC (SWR) bends any radius, 110 mm bore all as specified and directed.
S&F PVC (SWR) bends any radius, 75 mm bore all as specified and directed.
S&F PVC (SWR) branch piece, single ( single Y) equal or unequal radius, 110 mm bore all as specified and directed.
S&F PVC (SWR) branch piece, single ( single Y) equal or unequal radius, 75 mm bore all as specified and directed.
S&F PVC (SWR) branch piece, single ( single T) equal or unequal radius, 110 mm bore all as specified and directed.
S&F PVC (SWR) branch piece, single ( single T) equal or unequal radius, 75 mm bore all as specified and directed.
S&F PVC (SWR) reducers, 110 mm bore all as specified and directed.
S&F PVC (SWR) reducers, 75 mm bore all as specified and directed.
S&F PVC (SWR) vent cowl, 110 mm bore all as specified and directed.
S&F PVC (SWR) "P" trap, 110 mm bore all as specified and directed.
S&F PVC (SWR) "P" trap, 75 mm bore all as specified and directed.
S&F PVC (SWR) "Q" trap, 110 mm bore all as specified and directed.
S&F PVC (SWR) "Q" trap, 75 mm bore all as specified and directed.
M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in benching/coping and sub base all as specified and directed.
M&L for injecting chemical GLYPHOSATE 41 percent soluion 20 ml or till refusal by making cut/injection in the stem of plant 30mm centere to centre and spraying with solution (25 ml Glyphospate 41 percent diluted with one litre of water) and removing the plants/vegetation with penetrated roots including all necessary scafolding arrangments upto 04 storeys all as specified and directed. Note:- The quoted rate deemed to include for inspection and surveying all the buildings in area regularly for preventing any additional growth of vegetation/ palnts with above treatment to the entire satisfaction of Engineer-in-Charge.
All as per item No. 56 above but 5th to 8th floor all as specified and directed.
Providing and erecting vertical scaffolding net (debris net), made out of high density polyethylene for dust and debris control and keeping the same during the period of work and including dismantling and taking away after completion of the work all as specified and directed.
Providing and erecting and subsequently dismantling temporary GI /plywood portions with 2.00 Mtr high fixed on bamboos/wooden post etc within the premises so as to isolate the living area from working area and taking away all materials as per directions of the Engineer-in-Charge.
M&L for mild Steel props for scaffolding for building of any height ( including high rise bldgs upto and including 8th floors) for repairs of cracks, chipping off loose plaster, preparation of external wall surface or any other similiar work for application of painting as specified and directed by Engineer-in-charge. Note : Item will be measured and paid as per the coverage area of painting only once for a given location.
Providing and erecting horizontal industrial safety net as per IS 11057: 1985, made out of polypropylene rope as per IS 5175: 1992, mesh size 75 mm X 75 mm, border cord 12 mm, tie cord 12 mm, mesh cord 4 mm including overlay with HDPE net to catch personnel and debris and keeping the same during the period of work and including dismantling and taking away after completion of the work all as specified and directed..
Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets all as specified and directed.
M&L for POP ceiling including cornice of POP fixed on anodised snap grid frame work for false ceiling with size of grid 605x605mm consisting of main and cross tee of size 36.5 x 25 x 1.4 mm (wt 0.24kg/RM) and 23.5 x 26.4 x1.4mm (wt 0.191kg/ RM) respectively including aluminum angle 25x25x 1n4 mm & provn of hangers of GI wire of 2mm dia and providing painting with two coat of synthetic enamel paint over a coat of primer on wooden surface all as specified and directed by Engineer-in-Charge.
M&L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type BO/Cement mortar 1:3 all as specified and directed with following:- (a) M & L Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong or equivalent) of size 25 x 25 mm (b) S & F 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners (c) S & F GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders along with adjustable camp to maintain level. (d) S & F for E-board ceiling tilesof size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE
S&F in repairs vitreous china white wash basin flat back size 550 x 400mm excluding taps, waste, chain, and plug and porcelain stopper but including brackets & cutting for and pinning in end of brackets or erecting stand all as specified and directed. Make : Cera/ Parryware/ Hindware, sample as approved by GE
S&F in repairs pillar taps cost copper alloy fancy type with capstan head, chromium plated screwed down high pressure with or fly nuts screwed for 15 mm bore iron pipe and fixed all as Specified and directed. Make : Cera/ Prayag/ Jaguar, sample as approved by GE
S&F in repairs Chromium plated brass angle valve for 15mm bore pipe all as Specified and directed. Make : Cera/ Prayag/ Jaguar , sample as approved by GE
S&F in repair, two way angle valve cock chromium plated brass fancy type bore 15mm all as Specified and directed. Make : Cera/ Prayag/ Jaguar sample as approved by GE
S&F in repairs plastic seat cover black/white of pattern W.C including fixing divice and Chromium plated nuts, all as Specified and directed. Make : Cera/ Prayag/ Hindware sample as approved by GE
S&F in repairs vitreous china wash down water closet of Pedestal pattern white including making connection to trap and to flushing pipe and making good to floor all as Specified and directed. Make : Cera/ Parryware/ Hindware sample as approved by GE
S&F in repairs CP brass toilet paper holder, superior quality all as specified and directed. Make : Cera/ Prayag/ Jaguar sample as approved by GE
S&F in repairs CP brass, soap dish, superior quality all as specified and directed. Make : Cera/ Prayag/ Jaguar sample as approved by GE
S&F in repairs Health foucet including PVC pipe 1.50m long with brass nuts for EWC all as specified and directed. Make : Cera/ Prayag/ Jaguar sample as approved by GE
S&F in repairs PVC flushing cistern 10 ltr capacity with inlet, ball valve, float and handle and 32mm bore flush pipe including bracket all as specified and directed, Make : Cera/ Prayag/ Hindware sample as approved by GE
S&F in repairs PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts all as specified and directed. Make : Cera/ Prayag/ Jaguar sample as approved by GE
S&F in repairs sheet glass shelf assembly consinsting of 5.5 mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long all as specified and directed. Make : Cera/ Prayag sample as approved by GE
Demolition & cleaning the sunken floor surfaces by wire brushes, brooming, removing dust all as specified and directed
M&L for Sunken porition Treatment as below :- 1. Clean the sunken portion of toilet/Bath/WC/Kitchen throughly to remove laitance, dirt, dust, etc. 2. Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar ("Dr Fixit" Pidicrete URP" or eqvt) 3. Sanitary pipes entering through walls and floor shall be sealed with "Dr Fixit Bathseal Tape" and the gaps to be grouted with non-shrink cementitous grout "Dr Fixit Bathseal Grout" or eqvt. Nahani traps, etc to be fitted securely and the gaps around it to be grouted in the same manner. 4. Apply one coat of a Bitumen-modified polymer coating "Dr Fixit Pidifin 2 K" or eqvt on all angle fillets by brush and cover it with 100 mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely. 5. In the remaining area, in dry sustrate condition brush apply first coat of the same coating and further apply second coat when first coat is dry. Extend the coating upto 150 mm above the FFL. another cementitious waterproof coating "Dr Fixit Pidifin 2 K" or eqvt can be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely.as per manufature instruction for sunken portion complete all as specified and directed.by Engr-in-Charge. Make : Dr Fixit or equivalent of Asian paint / Fosroc/ sika
S&F UPVC pipes out side dia 16 mm of pressure rating 10 Kgf/Sqcm, spout pipe fixed in floors all as specified and directed
M&L PCC 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete including sub base of floors (d) S & F for E-board ceiling tilesof size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE (d) S & F for E-board ceiling tilesof size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE
S&F in repair vitreous china wash down water closet of "Orissa" pattern size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe and making good to floor all as specified and directed.
S&F in repairs bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore all as specified and directed.
S&F in repairs bib taps short body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore all as specified and directed.
Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish all as specified and directed.
M&L for first and premium quality of non skid, ceramic digital “coloured” matt finish joint less tiles of size 300 x 300 x 6-7mm or thick, in floor, shelves, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specifed and directed. Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.
M&L for first and premium quality of Glazed ceramic coloured digital tiles 600 mm x 300 mm or 405 mm x 250 mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps, set and jointed in neat cement slurry, and pointed in coloured cement to match the shades of tiles laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.
M&L for first and premium quality of non skid, joint free GVT “coloured” tiles of size 600 x 600 x 6-7 mm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 all as specifed and directed. Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.
M&L for first and premium quality non skid, GVT “coloured” tiles of size 600 x 600 x 6-7 mm thick, cut to size in vertical surface, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 10 mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.
M&L for glazed ceramic exterior wall tiles 6 to 8 mm thick, set & jointed in cement and pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified & directed. Make – Johnson (Endura) or equivalent in Kajaria/ Euro tiles, sample as approved by GE
M&L Vitrified tiles dark or light shade /double charge /ultra charged 600 x 600 x 10-12 mm thick (square/ rectangular) polished, size of each tiles in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.
M&L Vitrified tiles dark or light shade /double charged /ultra charged 10-12 mm thick cut to size (square/ rectangular) polished, on vertical surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles, laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.
M&L in repairs for Granite stone best quality (of any type) tiles 15 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 including dismentling of stone slab all as specified and directed
M&L for heavy duty outdoor vitrified tiles dark or light shade /double charged /ultra charged 16 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed. Make : Johnson tiles / Kajaria /Euro, approved sample as kept in GE Office.
M&L PCC padding 1:2:4 type B-0 of uniform thickness 50mm in two layers with chicken wire mesh in between the layers, top surface of plain cement concrete padding shall be finished even and smooth w/o using extra cement all as specified and directed. (wire netting shall be measured and paid separately)
Supply only wire netting of galvanised steel wire 0.91 mm dia fixed with tinned tacks of wire staples and size of mesh 12mmx12mm all as specified and directed.
Demolition of plain cement concrete (un-reinforced ) of any description and in any position not otherwise specifically provided all as specified and directed.
Supply and fixing in repairs 1000 Ltrs double layered Rotational moulded polyethylene water storage tanks white colour (cylindrical vertical with closed top using PVC cover) hoisted and fixed in position all as specified in SSR Part I all as specified and directed.
S&F in repairs 2000 Ltrs double layered Rotational moulded polyethylene water storage tanks white colour (cylindrical vertical with closed top using PVC cover) hoisted and fixed in position all as specified in SSR Part I all as specified and directed.
S&F 20 mm dia float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified and directed.
SAHI SAGAR ENTERPRISES
Unitech Enterprises
Frends Enterprises
SHREE JAGDISH FURNITURE CO.
David Construction Co.
SR Construction
HINDUSTAN BUILDERS
Bidder Name
Unitech Enterprises
HINDUSTAN BUILDERS
Frends Enterprises
S S ENTERPRISES
David Construction Co.
SHREE JAGDISH FURNITURE CO.
SR Construction
SAHI SAGAR ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .