Providing aluminium partition with air conditioner arrangements and inner wall paintings in the first floor for installation of GeneXpert system CBNAAT for detection of COVID-19 at District model laboratory, Govt. General Hospital, Karaikal.

Amount

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc.complete - 125 X 63 X 4 mm

Providing and fixing ISI marked powder coating tower bolt black finish (Barrel type) with necessary screws etc.complete - 150x10mm

Providing and fixing ISI marked powder coating tower bolt black finish (Barrel type) with necessary screws etc.complete - 100x10mm

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI , IS :3564 , embossed on the body , door weight upto 35 kg and door width upto 700 mm ), with necessary accessories and screws etc complete

Providing and fixing aluminium sliding door bolts , ISI marked , anodised ( anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade , with nuts and screws etc complete - 250 X 16 mm

Providing and fixing factory made P.V.C. door frame of size 50x 47 mm with a wall thickness of 5mm , made out of extruded mm rigid PVC foam sheet, mitred at corners and joined with 2 nos , of 150mm long brackets of 15 x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 x19 mm M.S.square tube of 19 gauge , EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall using M+B15S.screws of 65 / 100 mm size, complete as per manufacturter's specification

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S.tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15 x15 mm for top & bottom rails. M.S.frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top , bottom and lock rails shall be provided both side of the panel. 10mm (5 mm x 2) thick , 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail , panelling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded / sealed to the styles & rails with 7 mm (5 mm + 2 mm) thick x 15 mm wide P C sheet beading on inner side , and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C" Channel using PVC solvent adhesive etc. complete manufacturer's specification & drawing - 30mm thick plain PVC door shutters

Applying one coat of water thinnable cementprimer of approved brand and manufacturer on wall surface - water thinnable cement primer

Wall painting with plastic emulsion paint - Royal of approved brand and manufacture to give an even shade - two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scrarches etc.complete

Acid cleaning for the existing Mosaic floors , glazed tiles work and removing the stains and decays to give a glassy look etc complte (The Acid used shall be 32% concentrated hydrochloric acid after taking on the precautionary measures)

Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid, 10 litre low level white P.V.C. flusing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps ,32 mm C.P.brass waste of standard pattern , including painting of fittings and brackets ,cutting and making good the walls wherever required - white Vitreous China wash basin size 630x450 mm with a pair of 15 mm C.P.brass pillar taps

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C.pan

Providing and fixing CP brass health faucet of approved quality - 15 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings , with one step CPVC solvement cement and the cost of cutting chases and making good the same including testing of joints complete - Concealed work , including cutting chases and making good the wall etc - 20 mm nominal outer dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings , with one step CPVC solvement cement and the cost of cutting chases and making good the same including testing of joints complete - Concealed work , including cutting chases and making good the wall etc - 25 mm nominal outer dia pipes

Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) - 25mm nominal bore

Providing and fixing C.P.brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms - 15 mm nominal bore

Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931- 15 mm nominal bore

Providing and fixing PTMT swivelling shower, 15mm nominal bore, weighing not less than 40 gms

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass /stainless steel screws , all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for fixed portion - anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including neces+B12sary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass / tainless steel screws , all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for fixed portion - Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 grade I type II , in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings- Pre - laminated particle board with decorative lamination on one side and balancing lamination on other side

Providing and fixing glazing in aluminium door, window , ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings ( cost of aluminium snap beading shall be paid in basic item) - with float glass panes of 4.0 mm thickness

Providing and fixing netlon mesh

Dismantling the damaged plastering in brick work without affecting the adjacent structures including the cost of required tools and plants and cleaning the debries from the site with an initial lead of 100 mts away from the building Rate quoted does not included cost of providing scaffolding

Providing cement plastering 1:4 over the exposed brick work of thickness 12-15 mm cement mortar admixed with CERA MICRO SEAL at 500 gms per bag of cement. Rate quoted includes cost of sand and admixture but excludes cost of cement and providing scaffolding

Cleaning and exposed RCC surface thoroughly by washing the copious quantity of water, removing rust and seals from exposed rafters and providing anticorrosive primer Zinc rich coating CERA ZINC ZR. And cleaning the surface for adequate PH using phenolphthalein indicator. complete

Applying of bonding coat by using cement slurry added with polimer additive CERA POLYSTER LATEX over the exposed RCC surface or brick surface as per manufacturers mix and application specification.

Providing cement plastering CM 1:3 over the dismantling RCC portion up to a thickness 15-20mm with cement mortar admixed with CERA MICROSEAL at 500gms per bag of cement. The rate quoted includes cost of sand and admixture but excluding cost of cement and providing scaffolding

Dismantling the damaged portion in RCC beams colums and ceiling without affecting the adjacent structure in all floors including the cost of required tools and plants and cleaning the debris from the site with an initial lead of 100 mts away from the buildings etc., complete Rate quoted does not included cost of providing scaffolding

Supply, erection, testing and commisioning of 1.50 Ton Split air conditoner approved brand and manufacture of Daiki/ Mitsubishi/ Hitachi/O-General of thef ollowing specifications: The air conditoner shall be fit to run at single phase 230 volts 50Hz, with capacity of 17750 Btuper hourand 5.2 KW with CoP.286. The indoor units shall have five step and automatic fan spped controls, an air flowof minium, 17.5 cum/min (618 cfm) sound levels form 35-50DB(A) with horizontal and vertical air flow features,cordless remote control unit andbatteries as supplied bythe manufacture the outdoor unit shall have the compressor of hermetically sealed rotary type with safety grills, power consumption of 1530w with refrigerant charge (R-22) at 1.00 KG and sound level below 55dB, required provision in for liquid, gas and drain connections for a maximum piping length up to 20M. The indoor and outdoor units shall be supplied as packed by the manufactures with user manual and warranty cards and reacted at asuitable location selelcted by the department etc., complete as directed by the Enginer -in-charge.

Supply, erection, testing and commissioning of voltage stabilizer of 230 Volt, 50 Hz 4 KVA voltage stabilizer Make: Everest (wall mounting type) working range shall be 170 V to 270 V to give the out put voltage of range 190 V to 240 V with bucking and boosting, and shall have built in time delay of 3 minutes 20 sec., from resumption of power supply and dual relay for increasing / decreasing voltage start facilities when the voltage decreasing/increasing after high / low off action etc., complete as directed by the Engineer In charge

Supply and fixing copper pipe 1/2" softener copper pie 2mm thick for suction and delivery as directed by the Engineer In charge

Supply and fixing powder coated MS stand with the necessary screw/bolt and nuts weighing not less than 2.5 Kg capable of holding the outdoor unit for fixing outdoor unit. etc., compete as directed by the Engineer in charge.

ANBALAGAN G

MAHADEVAN R