SPECIAL REPAIR TO P1 B6 P1 B4 AND P1 B3 AT AGE BR I UNDER GE NW KUNJALI IN NAVAL DOCKYARD MBI COLABA, MUMBAI

Amount

Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge.

Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed by Engr-in-Charge.

Dismantlling of timber scantling 40 sq.cm and over in section in framed work, in any positon at any height etc,complete all as specified and directed by Engr-in-Charge. Note :- Qty of Timber which is not considered in Schedule of Credit shall be deposited to users store.

Supply and Fixing Rolled section as in main and cross beams, hip and jack rafters; purlins, vertical post, plates, pipes where connected to common rafter and running rails and fixing with angle cleats or other connection plates also fixing wind tie bars etc. complete all as specified and directed by Engr-in-Charge.

Material and labour for Pre-painted galvatume aluminum zinc coating GI based (manglore pattern) corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. complete all as specified and directed by Engr-in-Charge.

Material and labour for prepartion of new or previously untreated steel surfaces of any description over 10cm in width or girth not otherwise describe and applying two coat of synthetic enamal paint paint oner one coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

Supply and Fixing Plain galvanised, mild steel sheeting of 0.63mm thick, in ridges, hips, valley gutters, drip and strainght flashings (length and girth are fixed) with grade of zinc coating 275 fixed etc,complete all as specified and directed by Engr-in-Charge.

Supply and Fixing MS Flat iron wind ties and stays for gutter including securing with bolts and all necessary drilling bolting or riveted etc confirming to Fe 290, Gde E-165 complete all as specified and directed by Engr-in-Charge.

Supply and Fixing roof tiles Manglore pattern interlocking at side joint and laid dry complete all as specified and directed by Engr-in-Charge.

Supply and Fixing for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engr-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards, false ceiling, wall panneling & partation boards bonded wool, blanket slab incl aluminium grid frame work complete all as specified and as directed

Material and labour for Anodised aluminium snap grid frame work for false ceiling of grid size 605X605 mm with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm (etc complete all as specified and directed by Engr-in-Charge. (Make : Everest or equvalent as approved by GE)

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

Material and labour Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding/equal to 0.36 sqm but n exc 0.42 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 20mm thick screed bed in CM 1:4 complete all as specified.

Material and labour for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Material and labour for Coloured glazed ceramic tiles in vertical surface 450 X 300 X 7 mm or 300 X 200 X 7MM thick, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed by Engr-in-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar and removing rubbish off the premises (outside MD land) etc complete all as specified and directed by Engr-in-Charge.

Material and labour for Hard wear stone (of any type) granite stone slab 20mm thick in flooring machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Material and labour for PCC 100mm thick D-2 type (1:4:8), using (40 mm graded aggregate) as in sub base complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and directed by Engr-in-Charge.

-ditto- as per Item above but n.exc 1.5 sqm complete all as specified and directed by Engr-in-Charge.

Material and labour powder coated Aluminium frame and shutter for doors, sliding windows & ventilators (moveable louvers type) and for prtitions with one or more rebates including joining cleat for fixing etc. Rubber gasketing all round the panels/ shutters to fix glass, PVC gasketing in all channels, locking arrangement, (minimum thickness of powder coating 50micron) complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 5mm thick glass sheet one side frosted ordinary quality and glazing with in square, n exc 0.5 Sqm in each pane, fixed to Aluminium windows/ventilator in repairs complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repair aluminum anodised GRILL (Deco grill DG 103 of 7.5 mm thick of M/s ELESAR FOCCHI Ltd.) fixed with suifable 'F' section No. 8584 15.30 x 23.40 x 1.40mm fabricated and rivetted to aluminum windows, complete all as specified and directed by Engr-in-charge.

12 mm thick pre-laminated Medium Density board,both side decorative lamination interior grade,fixed in aluminium/ wooden frame work complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repair 75mm dia of outler cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repairs 100mm dia of outler cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed by Engr-in-Charge.

Supply and fix, connect and test GI Tubing 15mm dia , medium grade with all fittings and fixed complete to wall and ceiling or laid in floor completei ncluding taking down of existing pipeline complete all as specified and directed by Engr-in-Charge.

Supplying and laying of CPVC pipes of 20mm dia SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repairs 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed by Engr-in-Charge.

Supply and Fixing fixed in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets for fixing purpose, waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed by Engr-in-Charge.

Supply and Fixing fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs of 15 mm bore pipe etc complete all as specified and directed by Engr-in-Charge.

Supply and Fixing vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding as fixed in repairs complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repairs for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and directed by Engr-in-Charge.

Supply and Fixing brass Chromiun Plated towel rail, 20mm dia, D type , 60 cm long between flanges fixed in repairs complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repairs brass CP shower rose 125mm size complete complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repairs for providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 100 mm Butt hinges, mild steel, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 75 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 200mm long aluminium anodized barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 150 mm long aluminium anodized barrel tower bolts of extruded sections as fixed complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.

Supply and Fixing for 140mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 150mm extruded aluminium alloy handles, cast type as fixed complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 100mm extruded aluminium alloy handles, cast type as fixed complete all as specified and directed by Engr-in-Charge.

Supply and Fixing solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified and directed by Engr-in-Charge.

Supply and Fixing factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with salvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site all as specified and directed.

Supply and Fixing aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repairs 4 mm thick bakelite sheet with decorative choice laminated on both side complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repairs Roller venetion blinds type made out of standard cloth of approved texture with necessary accessories etc complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster or cement lime plaster on brick on stone walls etc including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

Material and labour rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (with out using extra cement) including Sagol finish complete all as specified and directed by Engr-in-Charge.

Material and labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant primer with 3mm thk wall care putty on plastered surfaces complete all as specified and directed by Engr-in-Charge.

Material and labour prepration of old plastered / decorated surfaces of walls and applying one coat of oil bound distemper with one coat of birla white putty on plastered/decorated wall surfaces complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of old wall surfaces of any description & applying one coats of acrylic (antifungal) exterior grade paint on wall/roof including necessary scaffolding complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, complete all as specified and directed by Engr-in-Charge.

M& L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed by Engr-in-Charge.

All as per item no 60 above but half brick thick wall built in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in soft/loose soil for shafts, wells, manholes etc n exc 10Sqm on plan for sewage line & foundation etc all as specified and directed by Engr-in-charge.

Material and labour for concrete bed of PCC 1:4:8 type D2 using 40mm graded stone aggregate for SGSW pipes 150mm bore, bedding and hanching completely after pipes are laid, jointed and tested complete as specified and directed by Engr-in-charge.

Supply and laying of salt glazed stone ware pipes 150mm bore grade 'A' laid in trenches and jointed in cm (1:1) incl testing complete all as specified & directed by Engr-in-charge.

Material and labour for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass conc in manholes complete all as specified and directed by Engr-in-Charge.

Material and labour for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping, benching and other similar work (location) with weathering slightly rounded edges and throating etc as required with and incl all necessary form work complete all as specified and directed by Engr-in-Charge.

Material and labour for PCC 1:2:4 type B2 as in mass concrete in surface channel and drain incl forming fair finished cement concrete with using extra cement complete all as specified and directed by Engr-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement ,including forms,moulds,mi-tred/stopped ends etc complete all as specified and directed by Engr-in-Charge.

Returning filling in incl, spreading, leveling, watering and well ramming in layers n exc 25cm thick all as specified and directed by Engr-in-charge.

Removal of surplus soil/excavated materials to a distance n exc 50m and deposited, spreding leveled where directed by Engr-in-charge not exc 1.5m above from the starting point complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 20mm bore PVC coated MS conduit drapery rods, suitable for door/widows curtain with fancy type dooms as approved by GE, and fitted to each end, incl necessary brackets and fixed to wall complete all as specified and directed by Engr-in-Charge.

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures connected, and making good to disturbed surfaces as directed by Engineer-in-Charge

Material and labour point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sq. mm as earth continuity conductor connected to common earth dolly complete all as specified and directed by Engr-in-Charge..

One light point controlled by one 5A switch

One Fan point controlled by one 5A switch

One bell point controlled by one 5A switch

One 5A flush type switch socket point on same board board

One 5A flush type switch socket point on independent board

Material and labour point wiring complete with 4 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 4Sq. mm as earth continuity conductor connected to common earth dolly for15 amp swich socket on independant board complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in replacement of Switch piano flush type single pole one way ,5/6 Amps complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in bell , multi music type 6amps, 240volts, SP complete all as specified and directed by Engr-in-Charge.

Supply and fix switch sockets combination 5 pin 5 Amps flush type 240 Volts AC complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement switch socket combination multi purpose 3 pin 15 Amps controlled by one switch flush type 240 Volts AC complete.

Supply and Fixing in replacement of fan regulator electronic step type socket size and making all necessary connections complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in replacement of Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in replacement of MCB 6 to 32 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in replacement of MCB,SPN 40 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified and directed by Engr-in-Charge. Make - Legrand cat No 607731 or equivalent in siemens/GE (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

S &F 20 Watt 4 FT LED tube light fitting integrated Batten T5: Nakshatra series indooor light decorative alluminiumextruded T5 LED Batten-integrated type complete all as specified and directed by Engr-in-Charge. Make- C & S CAT PART NO LTTB4F20WLED/W,OR Equivalent TO Havells,wipro,CG

S &F 10 Watt 2FT LED tube light fitting integrated Batten T5: Nakshatra series indooor light decorative alluminiumextruded T5 LED Batten-integrated type complete all as specified and directed by Engr-in-Charge. Make- C & S CAT PART NO LTTB210WLED/W ,OR Equivalent TO Havells,wipro,CG

Material and labour in repair Submain wiring with two run 4 Sqmm single core multistranded PVC insulated & unsheathed copper conductors 1100 volts FRLS grade ISI make drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc including one run PVC insulated & unsheathed multistranded copper conductor 4Sq. mm FRLS grade ISI make as earth continuity conductor connected to common earth as earth dolly complete all as specified and directed by Engr-in-Charge.

Supply and Fixing exhaust fan of sweep 300 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by using 4 Nos 200 mm long 12 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 completed all as specified and directed. Make: Havells/CG/ bajaj

Supply and Fixing Ceiling fan 5 Star Rated 1200 mm sweep heavy duty type complete with and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by complete all as specified and directed by Engr-in-Charge.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6sq mm 2 core. laid in duct / along pole/wall etc including making connection complete all as specified and directed by Engr-in-Charge. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

M/s S.D Construction Co

Shetty Construction Co

ROHIT CONSTRUCTION

jalandhara construction

sai construction

OM SAI POWER SYSTEMS

SATYANARAYAN CONSTRUCTION

Garima Construction Co

siddharth and company