86/EEC/BSNL/CD/BGL/2022/23

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :

25 mm dia (heavy type)

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Single rubber stopper

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge.

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail.

Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive.

An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.

30 mm thick plain PVC door shutters.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type), approved shape and section with screws instead of glazing clips and metal sash putty, in steel doors, windows, ventilators and composite units.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,

(i)Single socketed pipes.

75 mm diametre

110 mm diametre

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.

Bend 87.5° 110 mm bend

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand).

Renewing glass panes, with wooden fillets wherever necessary:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Dismantling 15 to 40 mm dia G.I./UPVC pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge.

(a) Internal Work- Exposed on wall

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :

White solid plastic seat with lid

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe 32 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Rectangular shape 453x357 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

20 mm nominal outer dia. Pipes.

25 mm nominal outer dia .Pipes.

40 mm nominal outer dia .Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work.

25 mm nominal outer dia. Pipes.

40 mm nominal outer dia. Pipes.

75 mm nominal outer dia. Pipes.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :

25 to 40 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

25 mm nominal bore

40 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

100 mm diameter

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :

100 mm diameter Class-I

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock /stop cock of approved quality conforming to Is standards .Cost includes removal of non-funtional/worn-outbibcock/stop cock etc complete as directed by the Engineer in charge.

15 mm nominal bore.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards Cost includes removal of non-funtional/worn-out bibcock etc complete as directed by the Engineer in charge.

15 mm nominal bore

Providing and fixing PTMT bib cock of approved quality and colour.

15mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Providing and fixing PTMT stop cock of approved quality and colour.

15 mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.

25 mm nominal bore, 152 mm long. Weighing not less than 440 gms.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.

15 mm nominal bore with 45 cm length.

Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)up to 0.30m length including disposal of malba. (

Supplying and fixing C.I. cover without frame for manholes :

455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg.

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg.

Attending blockages by dismantling 15 to 40 mm dia G.I./UPVC pipe and refixing the same after attending necessary repairs etc complete as per direction of Engineerin-Charge. (a) Internal Work- Exposed on wall

Making connection of G.I. /UPVC distribution branch with G.I. /UPVC main of following sizes , including cutting and threading the pipe etc. complete : 75 mm nominal bore

Excavating trenches in all kinds of soil of required width for making Emergency repairs to 40 to 100mm PVC/ GI water supply line including carefully excavating upto the top of the pipe without damaging the existing pipe line, underground cables, dressing of sides including getting out the excavated soil,carefully removing the tree roots coming in the way of loop line( if any) to facilitate repair work & then refilling the soil in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming watering etc. and disposing the surplus excavated soil as directed with the lead of 50 meter.

Providing & Fixing SWR grade fittings of approved make and manufacture

100mm dia bend

110MM DIA BENDS with access door

110MM DIA" T"with access door

110mm dia coupler

75MM DIA BENDS

75MM DIA BENDS with acess door

75MM DIA "T" with acess door

75mm dia coupler

P/F PVC SWR grade pipes of approved brand and manufacture (FOR MAINTENANCE WORKS) including fixing it in position using solvent or cement mortar ,all complete as directed by Engineer-in-Charge

110 mm dia

75 mm dia

Clearing blockages in Sewer lines of any diametre between over flowing blocked manholes of all sizes and depth including removal of sludge / silt /rubbish etc., and disposal of the same up to lead of 100m

one manhole and connected sewer line up to next manhole

Clearing of blockage in floor trap/ gully trap and conncected sewer line up to manhole at all levels including rodding with G.I wire of suitable thickness in blocked SWR pipes up to required length and removing rubbish / sludge and disposal of the same up to a lead of 100m complete as per the directions of Engineer-in-charge.

Clearing of blockage/chokage in manholechamber and sewerage line up to dia200mm between chambers Mechanicallyby arranging pressure jet sewer /guttercleaning equipment housed over the lorryand cleaning the choked line by insertingthe vocuum pump for removing blockage and with high pressure water pumping from chambers along the sewer line and making the line free flow for sewage alongwith collection including disposal of sludge to the nearby BBMP/Municipal dumpingyard as permitted by the authorities etc.,complete as per the directions of Engineerin-charge. Note:-1) Depth of manholevaries from 0.45m to 2.5m 2) Nothing extrapayment shall be made on any account 3)The entire job involves mechanical cleaing ofmanhole chambers 10 Nos and sewer line of approximate length 60m and 200mm

Providing and fixing two in one tap including fittings of approved make etc. complete as per the directions of Engineer-in-Charge.Cost includes removal of non-funtional/worn-out 2 -in- 1 tap.

Providing and fixing 15 mm Heath faucet of C.P brass head and P.V.C connection pipeof approved make etc. complete as per the directions of Engineer-in-Charge. Cost includes removal of non-funtional/worn-out health faucet.

Providing and fixing 15mm C.P Brass pillar taps of approved quality conforming to IS. Standard Cost includes removal of non-funtional/worn-out pillar tap

15 mm nominal bore

Repairs to PVC flushing cistern of 10 Ltr capacity of any make and size including removing and replacing worn-out/non-functional parts like syphon washer, ball valve, flushing knob , siphon set, 32mm dia fulsh bend etc. wherever required complete as per the directions of Engineer-in-Charge.

Providing PVC flushing cistern syphon flush valve system with washer of approved quality

Providing PVC flushing cistern float valve system of approved quality

Providing PVC flushing cistern handle with lever system of approved quality

Providing PVC flushing cistern connecting flush bend(white PVC pipe) - for connecting EWC with necessary coupling/washers. Cost includes sealing of joints with suitable adhesives so as to make leak proof joint.

Providing PVC flushing cistern connecting flush bend(white PVC pipe) - for connecting Orissa WC with necessary coupling/washers. Cost includes sealing of joints with suitable adhesives so as to make leak proof joint.

Providing and fixing Brass spindle of approved quality to pillar cock / stop cock /bib cock/ concealed stop cock of 15mm or 20 mm nominal bore by replacing the damaged spindle complete as per the direction of the Engineer in charge.

Brass spindle of approved quality for stop cock /bib cock of 15mm or 20 mm nominal bore

Brass spindle of approved quality for pillar cock of 15mm or 20 mm nominal bore

Brass spindle of approved quality for concealed stop cock of 15mm or 20 mm nominal bore

Replacing the damaged PVC water tank cover (in PVC over head tank of capacity upto 2000 litres ) at an height up to floor seven level with new one including tightening with plastic bolts of required size as per manufacturer's recommendation, all complete as per direction of Engineer in charge.

Providing necessary repairs to the damaged MS windows/doors by removing the door shutter (either by cutting/ burning the hinges using gas welding machine at site or by removing the shutter after removing the screws and butt hinges as the case may be) and refixing the door in original position after removing the bend/ undulations in the door (members either horizontal or vertical or replacing the member it self (if required) including making good the damaged portion with necessary enamel painting (two or more coats over a coat of steel primer) all complete as per the directions of Engineer in charge.

MS DOOR Shutters (Note: The approximate door area to be repaired shall be 2.5sqm (2) The cost of MS sections if used shall be paid separately )

Windows Shutters.( (Note: The approximate door area to be repaired shall be 1.5sqm (2) The cost of MS sections if used shall be paid separately ,Cost includes removal and refixing of existing glass panes)

Credit to the department by the Contractor for taking dismantled, damaged GI/ UPVC pipes etc., of similar items.

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. Cost includes old damaged mesh etc complete as directed btyengineer incharge.

With available beading

P/F LOCKS TO MAIN DOORS (Either MS OR Wooden doors in all S/Q in WMS) Safety locks of approved make( GODREJ OR EQUIVALENT) of 7 levers with necessary allied civil works (Such as welding at site for fixing the lock in position etc depending upon the site requirements and type of door) all complete as directed by Engineer-in-Charge

Super night latch 7 lever - opening inside/outside model no.8812 of Godrej or equivalent .

Providing and fixing flexible/washable nylon mosquito mesh of approved make saint gobain or equivalent with necessary velcro and fixing to the existing frame with necessary adhesive all complete as directed by Engineer-in-Charge

Necessary grouting of worn-out tile joints in flooring and dado with a mixture of white cement admixed with water proofing compund with matching colouring pigment including pointing and rounding the edges wherever required and cleaning the area with mild acid before pointing ,all complete as directed by Engineer-in-Charge

Providing and fixing granite stone for door sill, size 40 mm to 75mm width, thickness 25mm to 40mm and length up to 1.5m fixed in position with metal paste or suitable adhesive etc. complete as per the directions of Engineer-in-Charge.

Providing and fixing stainless steel jali with or without hole for waste pipe for covering existing floor/nahani trap (a) 100mm dia.

P/F PVC MULTI FLOOR TRAPS of approved brand and manufacture; 110mmx75 mm including breaking open and removing the damaged floor trap and making good the same with white cement all complete as directed by Engineer-in-Charge

Providing and laying Ceramic matfinish floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick CementMortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cementand matching pigment etc., complete. as directed by the Engineer in charge.

Removing and refixing of wash basin for maintenance and repair works including fixing brackets, screws etc. complete as per the direction of Engineer-in-charge.

Providing and fixing CPVC gate valve with CPVC handle of approved quality

Credit to the department by the Contractor for taking (a)dismantled damaged / defective C.P Brass/Brass/Gunmetal fittings such as ,Bib cocks , stop cocks, angle cocks, gate valves , ball cocks , waste couplings , towel rail , towel ring, Shower rose and other items identified by Engineer-in-charge.

Credit to the department by the Contractor for taking dismantled, damaged / defective PTMT fittings, Flushing tank ,siphon set of all variety, EWC Plastic seats, PVC Connection pipes, PVC Over Head Tank Covers, waste pipes etc., of similar items.

Providing and fixing SS Towel ring of 200 mm dia of approved quality and make all complete as per direction of Engineer in charge.

Providing and fixing CP Brass waste coupling of size 32mm to 40mm dia. for kitchen sink / wash basin , Complete as per the directions of Engineer-in charge. Rate inclusive of removal of worn out waste coupling.

Providing and fixing CPVC .Fittings of following size etc Complete as per the directions of Engineer-in charge. Rate inclusive of removal of worn out fittings . etc complete as directed by the Engineer in charge.

20mm collar

20mm Nipple

20mm Union

20mm elbow

20mm brass threaded MTA

20mm CPVC threaded FTA

25mm Collar

25 mm nipple

"25mm union

25 mm elbow

25mm brass threaded MTA

25mm CPVC threaded FTA

40 mm collar

40 mm nipple

40 mm "T"& Elbow

40 mm union

40mm brass threaded MTA

40mm CPVC threade FTA

75 mm collar

75 mm elbow

75 mm PVC threaded MTA

75mm Union

75 mm cpvc threaded FTA

75 mm GI Nipple

Providing and fixing SS towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with two C.P. Brackets a) 600x20mm complete as per direction of Engineer in charge.