Periodical services and camouflaging painting to certain buildings at AF Stn Bikaner under GE (AF) Nal

Amount

Taking down cement plaster of any description upto any height on brick or concrete surfaces / kerb stones etc including raking out joints hacking for key, scrubbing down down with water etc complete all as specified.

M&L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces / kerb stones etc., finished even & smooth without using extra cement complete all as specified and directed.

Material and labour rendering 12 mm in cement mortar 1:6 on fair faces of brick or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5 mm in cement mortar 1:3 on fair faces of brick /concrete surface of ceilling and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed

M&L for fly ash brick work of size 230mm x 110mm x 70mm having compressive strength 75kg/sqcm straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed.

Demolition of reinforced cement concrete of any description in chajjas, parapet wall, beam, staircase, landing and similar suspended work and removing to outside MoD land complete all as specified and directed.

M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, chajjas and similar work n.exc 200mm thick horizontal or sloping complete all as specified and directed.

S&F mild steel deformed TMT bars 8 mm dia and over cut to length & bent to shape required including cranking bending spirally for hoping for column, hooking ends & binding with mild steel wire not less than on 0.9 mm dia or securing with clips complete all as specified and directed.

M&L cutting chases pining in concrete surfaces and making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings steps, cills, sun shades slabs lintels and cutting chases for concealed water tubing or concealed conduit wiring, etc not exc 10cm girth complete all as specified and directed.

M&L reinforced cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate in chajjas upto any height complete as specified and directed. Note: Reinforcement shall be be measured and paid for separately.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of alkali resistant primer complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of white wash complete all as specified and directed.

M&L preparation of newly plastered surfaces of ceilling / chajja or similar suspended work and applying two coats of white wash complete all as specified and directed.

M&L complete removal of existing treatement on wall surfaces with sand paper, iron patti or grinder, incl pillasters and cornices etc. incl washing, rubbing down and stopping the connected previously treated surfaces and and applying two coat of interior acrylic emulsion paint (tint as approved by GE) over and including 3mm thick cement based wall care putty (JK /Birla) to achieve smooth finish complete all as specified.

M&L complete removal of existing treatment and applying one coat of 3 mm thick JK/Birla wall putty to achieve a uniform & smooth surface (including filling in of all the cracks / fissures in cement plaster) and painting of different pictures of Animal designs (viz camel, rabbit, deer, antecope, peacock, elephant etc) in a different tint with water proof paints using specific painting brushes complete all as specified and directed as per sample kept in the office of AGE B/R (AF) Bikaner.

M&L complete removal of existing treatment and applying one coat of 3mm thick JK/Birla wall putty to a uniform surface (including filling in of all the cracks / fissures in cement plaster)to prepare suitable base and application of special texture painting over a coat of base paint by using required tools such as brushes, sponges, spatulas, textured rollers etc including cost of all paints and specific painting tools complete all as specified & directed as per sample kept in the office of AGE B/R (AF) Bikaner.

M&L 3 mm thick cement based wall care putty (JK / Birla) on plastered surfaces of walls complete all as specified and directed.

M&L complete removal of existing treatement on wall surfaces with sand paper, iron patti or grinder, incl pillasters and cornices etc. incl washing, rubbing down and stopping the connected previously treated surfaces and and applying two coat of oil emulsion distemper (tint as approved by GE) complete all as specified and directed. Note: Contractor shall procure 50% of oil emulsion distemper required for entire work of this item within 15 days of Date of Commencement of Work and shall keep in safe custody as directed by Engineer-in-Charge for incorporation in the works. The tenderer shall keep this aspect in mind while quoting the rates. Nothing extra on this account shall be entertained.

M&L preparation of newly plastered surfaces of walls including all cornices, pilasters etc and applying two coats of acrylic exterior emulsion apex paint in camouflage pattern of approved tint / shade(s) over a coat of water based primer complete all as specified and directed.

M&L preparation of plastered old decorated surfaces of walls incl pillasters and cornices etc. by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic emulsion paint exterior quality (tint as approved by GE) as in camouflaging pattern upto any height complete all as specified and directed. Note: Contractor shall procure 50% of acrylic emulsion paint required for entire work of this item within 15 days of Date of Commencement of Work and shall keep in safe custody as directed by Engineer-in-Charge for incorporation in the works. The tenderer shall keep this aspect in mind while quoting the rates. Nothing extra on this account shall be entertained..

Writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 cm height with paint complete all as specified and directed.

M&L preparation of old decorated surfaces of walls / kerb stone / concrete (plastered or unplastered ) by brooming down etc applying one coat of synthetic enamel paint of approved shade/tint complete all as specified and directed.

M&L preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots; washing etc. and applying one coat of white lime wash complete all as specified.

M&L preparation of plastered or unplastered old decorated surfaces of ceiling incl brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots; washing etc. and applying one coat of white lime wash complete all as specified.

M&L preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surfaces and applying one coat of oil emulsion distemper (tint as approved by GE) complete all as specified & directed. Note: Contractor shall procure 50% of oil emulsion distemper within 15 days of Date of Commencement of Work and shall keep in safe custody as directed by Engineer-in-Charge for incorporation in the works. The tenderer shall keep this aspect in mind while quoting the rates. Nothing extra on this account shall be entertained..

M&L preparation of old painted wood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified & directed. Note: Contractor shall procure 50% of Synthetic enamel paint required for entire work of this item within 15 days of Date of Commencement of Work and shall keep in safe custody as directed by Engineer-in-Charge for incorporation in the works. The tenderer shall keep this aspect in mind while quoting the rates. Nothing extra on this account shall be entertained..

M&L preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified & directed. Note: Contractor shall procure 50% of oil emulsion distemper required for entire work of this item within 15 days of Date of Commencement of Work and shall keep in safe custody as directed by Engineer-in-Charge for incorporation in the works. The tenderer shall keep this aspect in mind while quoting the rates. Nothing extra on this account shall be entertained.

M&L preparation of old decorated surfaces of over head resevoier 50000 Gln capacity at 21 metre staging height, and applying two coats of exterior acrylic emulsion paint in camouflage pattern complete all as specified. Note:- (a) Contractor shall take precaution for safety measures as per MES safety code. Contractor shall quote his rates keeping this aspect in mind and nothing extra on this account shall be payable to the contractor. (b) Unit rate of this item includes the following aspect:- (i) To provide complete scaffolding including safety belt to the workers as per directions of Engineer-in-Charge/GE. (ii) Nothing extra shall be paid on account of increase in height, hence work shall be carried out for complete surfaces varied at height and no claim on account of more height shall be entertained. Tenderer is hereby advised to see this factor before quoting his rate.

M&L preparation of old decorated surfaces of railing, stair case and CI pipes of over head resevoir 50000 Gln capacity at 21 metre staging height, and appling two coats of synthetic enamel paint complete all as specified. Note:- (a) Contractor shall take precaution for safety measures as per MES safety code. Contractor shall quote his rates keeping this aspect in mind and nothing extra on this account shall be payable to the contractor. (b) Unit rate of this item includes the following aspect:- (i) To provide complete scaffolding including safety belt to the workers as per directions of Engineer-in-Charge/GE. (ii) Nothing extra shall be paid on account of increase in height, hence work shall be carried out for complete surfaces varied at height and no claim on account of more height shall be entertained. Tenderer is hereby advised to see this factor before quoting his rate.

Jetharam Ramchander

M/S BIKANER CHEMICAL LABORATORIES