WELCOME MAINTENANCE TO B/R AND E/M WORKS, ROOF, JOINERY, PLASTERING AND CERTAIN CONNECTED WORKS IN OFFICERS MESS ENCLAVE AT 20 WING AF STN UNDER GE AF BAGDOGRA

Amount

M&L for preparation of old decorated plastered/ unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on wall surfaces complete all as specified and directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on wall surfaces complete all as specified and directed.

M&L for complete removal of existing treatment of any description on old decorated wall surfaces and applying 1.5mm thick JK/Birla wall care putty and two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on ceiling surfaces complete all as specified and directed.

M&L for preparation of old painted wood or wooden based surfaces of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint on wall surfaces complete all as specified and directed. Note: Work involved upto four storey bldg, hence rates for necessary arrangements like scafolding, safety belts, hanging arrangements & all safety measurements are deemed in the unit rate.

Taking down cement plaster on brick wall surfaces including reeking out joints hacking for key scrubbing down with water etc and removing the rubbish out of MoD land complete all as specified and as directed.

M&L 15mm thick rendering on brick work or concrete surfaces in Cement mortar 1:6 finish even and smooth without using extra cement complete all as specified and as directed. Note: Work involved upto four storey bldg, hence rates for necessary arrangements like scafolding, safety belts, hanging arrangements & all safety measurements are deemed in the unit rate.

M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distember over 1.5mm thick Brila/JK wall care putty over a coat of alkali resistant priming complete all as specifeid and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specifeid and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish out of MoD land complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm or 450 x 350 x 7 mm thick with matching highlighter over 10 mm thick rendering in cement mortar 1:3 set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles (Size and design/colour of tiles will be approved by GE) complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed in Cement mortar 1:6 as in floor (Size and colour of tiles will be approved by GE) complete all as specified and directed.

M&L for vitrified ceremic tiles 10 mm thick (square /ractangular) polished light shade, area of each tiles not exc 0.36 sqm over and including 20 mm thick cement mortar 1:6 screed bed in floors set and jointed in neat cement slurry and pointed in white or coloured cement match complete all as specified and as directed.

M&L for vitrified ceremic tiles 10 mm thick (square /ractangular) polished light shade, area of each tiles not exc 0.36 sqm over and including 10 mm thick rendering in cement mortar 1:3 as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement match complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F for anodised aluminium snap grid frame work of size 605x605mm for false ceiling consisting of main Tee (36.5x25x1.4mm) wt @ 0.24kg/Rm, Secondary (cross) Tee (23.5x 26x 1.4mm) wt @ 0.1291kg/Rm and wall angle (36.5x23.5x1.4mm) wt @ 0.22kg/Rm suspended with 4mm dia GI wire from purlin and fixed with 4mm thick non asbestos fibre cement ceiling board including preparation of new surfaces of ceiling surface and applying three coats of white wash complete all as specifiedall as specifiedcomplate all as specified.

Taking down shutters of any description exc 1.00 sqm each but n.exc 2.00 Sqm complete all as specified and directed.

S&F 40mm thick factory made designer door shutters,solid core construction with particle board core and covered with decorative face veneer with lipping on both sides and fitted to chowkats complete all as specified and as directed.

S&F for 100mm long Stainless steel butt hinges, medium weight, complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S & F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing with complete accessories all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified and directed.

S&F in repiars, 18/19 mm thick prelaminated particle boards, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and directed.

S&F 75mm long Stainless steel butt hinges, medium weight, complete all as specified and directed.

S&F 75 mm hasp & staple, safety type, aluminium anodised withmild steel steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 100mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 100mm long complete all as specified and directed.

S&F in repairs, galvanised steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repairs, 3mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beadings complete all as specified and directed.

S&F in repairs, Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq.m in each pane complete all as specified and directed.

S&F in repairs, 1000 to 1400 mm long and 20 mm wide door seal incl 10 mm wide cotton complete all as specified and directed .

S&F in repairs, corner shelf of PTMT fixed with chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300gms) complete all as specified and directed.

S&F in repairs, glass corner shelf with chromium plated guard and fixing arrangements complete of size 300mm complete all as specified and directed.

S&F in repairs, sheet glass shelf glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed with chromium plated brass screws complete all as specified and as directed

S&F in repairs, brass chromium plated toilet paper holder with CP brass screws, complete all as specified and directed.

S&F in repairs, brass chromium plated soap dish with CP brass screws complete all as specified and directed.

S&F in repairs, 125mm size brass chromium plated shower roses with or with out swivel joints, including fixing to steel pipe or unions complete all as specified and directed.

S&F in repairs, 15 mm bore health faucet with 1 mtr tube & hook complete all as specified and directed.

S&F in repairs, 150mm long aluminium anodised tower bolts of extruded section and fixed, complete all as specified and directed.

S&F in repairs, 300mm long aluminium alloy anodised sliding door bolt with hasp & stapple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast- aluminium alloy and fixed complete all as specified and directed .

S&F in repairs, 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F in repairs, 75mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and directed.

S&F in repairs, 300mm , mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs, 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repairs, 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repairs, 75 mm hasp & staple, safety type, aluminium anodised withmild steel steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs, 25mm dia, fancy type stainless steel drapery rod (curtain rod) complete all as specified and directed.

S&F in repairs, 25mm dia stainless steel decorative type bracket and side cups for curtain rods fixed with screws complete all as specified and directed.

S&F in repairs, 20 mm dia brass chromium plated tubular towel rail, D type, 60 cm long between flanges fixed with brass screws complete all as specified and directed.

S&F in repairs, 200mm dia brass chromium plated towel ring complete all as specified and directed.

S&F in repairs, 140 mm length door stopper aluminum alloy body and tongue, anodized, with hard drawn steel spring, complete all as specified and directed.

S&F in repairs, ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F in repairs, aluminium (extruded section body) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters 851 mm to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repairs, double action type floor spring hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot of brass, other parts made of Mild steel complete all as specified and directed.

S&F in repairs, small fittings galvanised iron medium grade such as socket, dead plug, elbow, nipple, Tee, union, tank nipple, extension nipple etc for 15 mm bore pipe (ISI marked) complete all as specified and directed.

S&F in repairs, small fittings galvanised iron medium grade such as socket, dead plug, elbow, nipple, Tee, union, tank nipple, extension nipple etc for 20 mm bore pipe (ISI marked) complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type stop cock (concealed type) with long shank and cup with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type two way angle valve with elegant knob screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type long boby bib taps with crutch or buttrfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type two way bib taps with elegant knob screwed down high pressure complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type pillar tap for WHBs with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs, Chromium plated 15mm bore centre hole basin mixer with extended casted spout with 450mm long braided hoses fancy type complete all as specified and directed.

S&F in repairs, 15mm bore brass CP Wall mixer with long bend pipe for connection to over head shower and fixed complete all as specified and directed.

S&F in repairs, 15mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union and fixed complete all as specified and directed

S&F in repairs, 20mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union and fixed complete all as specified and directed

S&F in repairs, 25mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union and fixed complete all as specified and directed

S&F in repairs, 32mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs, 32 mm bore PVC waste pipe for WHB/urinlas 600mm long with union etc complete all as specified and directed.

S&F in repairs, 15mm bore Bib tap standard of PTMT(Minimum weight 90 gms) any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (Make: Prayag or equivalent as approved).

S&F in repairs, ball valve 15mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. (Make: Prayag or equivalent as approved).

S&F in repairs, ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. (Make: Prayag or equivalent as approved).

S&F in repairs, ball valve 25mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. (Make: Prayag or equivalent as approved).

S&F in repairs, PVC connection 15mm dia and 450 mm long with 2 Nos PTMT nuts with washers complete all as specified and directed.

S&F in repairs, CI bracket for WHB or kitchen Sink etc complete all as specified and directed.

S&F in repairs, 125 mm dia CP grating doom with or without waste hole complete all as specified and directed.

S&F in repairs, 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S&F in repairs, plastic water closet seat cover white/coloured closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs, 10 Ltrs capacity PVC valveless, syphonic action type, flushing cisterm, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs, flush pipe of polyethlene of low or high density or PVC 32mm dia, for low level flushing cistern complete all as specified and directed.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern) white and trap, including connection to drain (or outgoing pipe) and to flush pipe, antishonage pipe etc including PVC matching seat cover complete all as specified and directed.

S&F in repairs, wash hand basin vitreous china white, (flat back or angle back type) of size 550X400 mm including cutting for and pinning in ends of brackets or erecting stand including CP wate coupling and wate pipe complete all as directed

S&F in repairs, Cascade type europen water closet coloured floor mounted, with seat cover , seat cover hanging devices complete all as specified and directed.

S&F in repairs, auto sensor inbuilt type urinal pot,battery operated including moulded sensor along with solenoid valve for water pipe line of make as approved complete all as specified and as directed.

S&F in repairs, PVC tank covers suitable for 500 litres to 2000 litres tanks complete all as specified and directed

S&F in repairs, 75mm dia PVC (SWR) pipes, single socketed, in any length, with rubber rings fixed to walls complete all as specified and directed.

S&F in repairs, 110mm dia PVC (SWR) pipes, single socketed, in any length, with rubber rings fixed to walls complete all as specified and directed.

S&F in repairs, stainless steel sink, 1.00mm thick for kitchen or laboratory, with plugs, washers and wastes; including bedding in cement moratar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe, over all size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs, stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory, with plugs, washers and wastes; including bedding in cement moratar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe, over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs, Steel plate rack made of 1mm thick stainless sheet of overall size 900x 900x 250mm with providing necessary partition shelves & hanging arrangement etc as per manufacturer trade pattern and fixed to wall with wooden plug with brass chromium plated screws complete all as specified and as directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 25 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 25mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F for 3-layer PP-R P o l y p r o p y l e n e random copolymer) 20mm dia concealed pipes SDR 7.4 (PN-16) stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Dismantling 500 ltrs capacity water tanksand removing to store complete all as specified and directed

Dismantling 1000 ltrs capacity water tanksand removing to store complete all as specified and directed

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer (ISI marked) complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer (ISI marked) complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from 500 ltrs PVC tanks and from mouths of circulating pipes, etc. complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from 1000 ltrs PVC tanks and from mouths of circulating pipes, etc. complete all as specified and directed.

Demolition of brickwork/stone masnory built in cm including all quoins ,arches ,pillars, etc, but excluding ashlar facings ,dressed stonework and precast concrete articles complete all as specifeid and directed

M & L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Dismantling polycarbonate roof sheet any thickness complete all as specified and directed

M&L for 6mm thick coloured polycorbonate sheet and fixed with screws to roof as per manufacturers instructions complete all as specified and directed.

Repairing of floor mounted Cascade type europen water closet including replacement of internal assembly (syphon, float valve, push buttons etc) of cistern and make it function in all respect complete all as specified and directed

Repairing of auto sensor inbuilt type urinal pot,battery operated including replacement of internal assembly (sensor system, batteries etc) and make it function in all respect complete all as specified and directed

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar complete all as specifeid and directed

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing with admixture of pigment to match with shade of granite, laid over and including 20 mm thick cement mortar 1:4 including rounding the edges complete all as specifeid and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings incl ridges complete all as specified and as directed

Dismantling Plain or corrugated steel sheeting any gauge thickness incl Nainital or similar pattern roof coverings complete all as specified and as directed

Dismantling of wrought or mild steel work of any description or otherwise provided forcomplete all as specified and as directed

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each and removing from the site including making good the disturbed surfaces of wall etc to match with existing adjoining surfaces complete all as specified and as directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but not exc 4 Sqm each and removing from the site including making good the disturbed surfaces of wall etc to match with existing adjoining surfaces complete all as specified and as directed

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L - type of J - type or cranked hooks and bolts complete all as specified and as directed

M&L for asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L - type of J - type or cranked hooks and bolts complete all as specified and as directed

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed

M&L for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed

M & L for roof truess (framed) or trussed framed purlins, crane gantries rails and fastenings and heavy bracket framing (Beem, tee, angle, channel or flat sections) incl distance pieces,cleats etc in Fe-410-W (GdeE-250) quality B complete all as specified and as directed

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of sythetic enamel paint over a coat of redoxide primer complete all as specified and as directed

M&L for second class hard wood framed and fixed in scantlings clean swan complete all as specified and directed.

M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium fittings such as handles - 02 Nos, 100mm long hinges - 03 Nos, sliding bolt - 01 Nos, tower bolt - 02 Nos in each door, powder coated aluminium snap beading and rubber gasket, screws etc complete all as specified and directed. Note: Glass shall be measured seprately.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading and rubber gasket, screws, powder coated aluminium fittings such as peg stays 150mm long - 01 Nos, telescopic hinges 75mm long - 02 Nos, suitable handle - 01 Nos etc in each shutter complete all as specified and directed. Note: Glass and wire mesh shall be measured seprately.

S&F powder coated aluminium sliding window shutters with frames (consisting of 02 Nos glazed shutters and 01 No gauge shutter) Series -D (25mm), 3 track sliding shutters, duly fitted with neoprene beading, glazing clips, locking device, aluminium alloy handles, heat absorbing glass 5.5 mm nominal thickness in glazed shutters, stainless steel wire mesh of 0.254mm nominal dia of wire and 0.95 mm average width of aperture in gauged shutter, Powder coated aluminium ornamental grill 8 mm dia, 75 X 75 mm aperture fixed in powder coated aluminium snap beading/ 'C' channel in outer surface of the window frame complete all as specified.

S&F Solid PVC Double door frame of size 50mm x 120mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed..

S&F Solid PVC door frame of size 50mm x 45mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed..

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded wood grain colour PVC `C' channel heaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wire gauzed (i.e. panel will be of stainless steel wire gauze in lieu of wood grain printed PVC sheet panel). The wire gauze shall be wrapped on an additional square 8mm M.S Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed. Note: Wire mesh in panels shall be measured seprately.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face ,supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed..

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails suitable PVC sheet beading, and jointed together with solvent cement , supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F 2nd class hard wood plain solid straight chowkhat or frame, wrought, framed, rebated on the solid, put together with glue and pinned at joint complete all as specified and as directed..

M&L for Treating ends of posts back of chowkats etc of area tarred exceeding 0.1 Sqm but n.exc 0.5 Sqm each with tar or coal tar black paint including sanding with clean sharp sand of newly tarred or painted surfaces complete all as specified and as directed.

S&F Mild steel hold fast made of flat iron conforming to Fe-290 Gde E-165 of size 25 x 3 mm bent to shape required with splitting end and drilling holes for fixing nuts & bolts (including nuts & bolts) including treating the steel surfaces with tar or coal tar black paint and sanding neatly newly tarred surfaces with clean sharp sand all complete as specified and as directed.

M&L for PCC type C1,1:3:6 (using 20 mm graded aggregate) for holdfast blocks complete all as specified and as directed.

S&F 2nd class hard wood 35 mm thick factory made plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides (feather edged),or of veneered particle board medium density,wood particle board with commrercial face veneers fitted to chowkats with rail and stile as per IS-1003(part-1)klin seasoned and chemically pressure treated complete all as specified and as directed.

S&F 40mm thick flush shutters, factory made, solid core construction with particle board core and ply wood face panels, commercial type on both sides and fitted to chowkats complete all as specified and as directed.

S&F 2nd class hard wood 35 mm thick glazed and skelton shutter open rebated factory made and prepared to receive glass / gauge etc, (with out sash bars) edges of framing plain, chamferred or rounded and fitted with cut and mitred beads for securing gauge, size of mambers as per SSR Part - I section clause 8.24 (a) complete all as specified and as directed Note: Wire mesh in panels shall be measured seprately.

M & L for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and as directed.

S&F for 100mm long Stainless steel butt hinges, medium weight, cold rolled complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S & F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing with complete accessories all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified and directed.

S&F 5.50mm thick sheet glass, ordinary quality and glazing any size complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed..

S&F stainless steel wire cloth, 0.254mm nominal dia of wire and 0.95mm average width of aperture and fixed with tinned tacks or galvanised wire staple etc complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DBs, bell removing materials to store & making good of disturb surfaces of wall/floors etc as specified & directed.

Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FR type drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards with sunmica top for mounting switches, sockets, fan Regulators, accessories etc as specified and directed for the following:- (a) One light/ one fan point controlled by one, one way swtich.

All as per ser No. 157 above but one 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per ser item No. 157 above but on independent board.

All as per ser item No. 157 above but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable4.00 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including PVC/wooden folding boards for mounting purposes.

All as per ser item No. 157 above but one light point controlled by 2 way switches.

All as per ser item No.157.00 above but one bell/buzzer point controlled by one push button on the same board with other switches or independent.

Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.6mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for the following:- Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall ,floors etc. (a) One light point and one fan point controlled by one, one way swtich.

All as per ser item No. 163.00 above but one 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per ser item No.163.00 above but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 4.0 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals.

All as per ser item No. 165.00 above but on independent board.

All as per ser item No. 163.00 but one light point controlled by 2 way switches.

All as per ser item No. 163.00 above but one bell/buzzer point controlled by one push button on the same board with other switches or independent.

Supply and Fixing switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & directed.

Supply and Fixing in replacement socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.

Supply and Fixing in replacement switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.

Supply and Fixing in replacement switch socket combination multipurpose flush type 2 in 1 type (3 and 3 pin ) 5/15 Amps, 230V, AC.

Supply and Fixing in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

Supply and Fixing in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish.

Supply and Fixing in replacement bell push, flush type, 5 Amp single pole, 230 volts white finish all as specified & directed.

Supply and Fixing in replacement switch piano flush button 5 Amp single pole 2 way 230 volts white finish all as specified & directed.

Supply and Fixing in replacement for connecting up fan regulator electronic stepped type on existing phenolic laminated sheet dimmer type 230 volts, 450 watts suitable for ceiling fan 1200/1400mm sweep.

Supply & fix in replacement of switch modular type 6 Amps one way AC 230 Volts.

Supply & fix in replacement of switch modular type 16 Amps one way AC 230 Volts.

Supply & fix in replacement of modular type bell push 6 Amps, AC 230 Volts.

Supply & fix in replacement of modular type socket 6 Amps 2/3 pin combined, AC 230 Volts.

Supply & fix in replacement of modular type socket 6/16 Amps 2/3 pin combined, AC 230 Volts.

Supply & fix in replacement of modular type fan regulator, AC 230 Volts.

Supply & fix in replacement of modular white cover plate with frame, 2 module.

Supply & fix in replacement of modular white cover plate with frame, 4 module.

Supply & fix in replacement of modular white cover plate with frame, 8 module.

Supply and fix in replacement surface and wall mounted LED batten 20 watt - 4Ft White with Aluminum housing & integrated electronic driver

Supply and fix in replacement surface and wall mounted LED batten 10 watt - 2Ft White with Aluminum housing & integrated electronic driver

Supply & fixing in replacement of LED bulk head ,10W environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit led luminaire comprising of high brightness leds.

Supply and fixing of LED Surface mounted downlight 10W with white powder coated polycarbonate decorative housing and pressure die-cast heat sink having high efficiency with heavy duty driver having THD<10%.

Supply & fix in replacement of bell, AC, 230 volts, single phase complete all as specified and directed.

Supply & fix in replacement of bell multi music type AC, 230 volts, single phase complete all as specified and directed.

Supply and Fixing in replacement of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA ,'C' series.

Supply and Fixing in replacement of MCB SPN/DP upto 32 Amps, 230 Volts, 50 Hz with 10 KA ,'C' series all as per site requirement and as directed .

Supply and laying or fixing in replacement twin sub main cable with 2 x 4 Sqmm multistrand PVC insulated unsheathed copper conductor PVC cable including contineous earth wire 1 x 4 Sqmm copper conductor insulated unsheathed complete all as specified and directed by Engineer in charge as following:- (a) In PVC concealed conduit

All as per ser item No. 195.00 above but in PVC casing caping

Supply & fixing in replacement of sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts 8 way with 200 Amps rated busbar all as specified and directed.

All as per srl item No 197.00 above but 4 way SPN with 200 amps rated bus bar all as specified.

All as per srl item No 197.00 above but 4 way TPN 415 volts all as specified.

Supply and fixxing sheet matal encloures with plug socket single pole and neutal with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified .

Supply and Fixing Decorative wall light fixture made up of Polycarbonate, suitable for lamp (B-22 base) including one LED Lamp upto 1x10 W LED Lamp (B22) complete with all accessories prewired incl three core copper cable 23/0.0076 from ceiling rose to light fittings.

Supply and fix in replacement Energy efficient Street/ Roadway/Building Security Luminaire, LED street light with pressure die-cast housing along with prismatic polycarbonate diffuser and LEDs with secondary optics of 20 Watts and IP 65 protection, complete with aluminium PDC housing, prewired, suitable for adequate size bracket with nut, bolts and clamps connecting using 1.5 Sqmm FRLS PVC insulated (Unsheathed) 3 core cable, 1100V grade with multistranded copper conductor, testing and commissioning. Note : Adequate size of bracket / clamps, nut, bolts, washers, etc required at site is deem to be included in this item rates.

M&L for cleaning and maintenance of ceiling fans and exhaust fans with louvers complete including materials like sandry items like soap liquid and fresh water or K/Oil etc to all external parts of fans with checking for senceivity of all bolts nuts washers rubber reel, split pin rubber pads including replacement of wornout & testing complete all as directed as per site requirement.

Supply and fixing in replacement MCB TPN, 415 Volts, 63 Amps C series all as specified.

Material & Labour in replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.

NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule A notes for details.

M/s Arun Chandra Sarkar & Sons

M/S SUNNY ENTERPRISE

MESSERS D S ENTERPRISE

M/S B K ENTERPRISE

M/S MANAS MITRA

SHRI P P SHARMA

SREE SWAPAN KUMAR GHOSH