Repair and mantainance work

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 40 mm nominal size)

Providing and laying cement concrete in retaining wall, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc up to floor five level excluding the cost of centering, shuttering and finishing. 1:2:4 ( 1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 MM nominal size

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit , in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Brick work with common brunt clay F.P.S (Non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and size in Cement mortar 1:6 (1 cement : 6 coarse sand)

Steel work welded in built up sections/framed work, including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar work

12 mm cement plaster 1:4 (1 cement : 4 fine sand)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and fixing concertina coil fencing with punched tape concertina coil 600 MM dia 10 meter open able length (total length 90M), having 50 Nos rounds per 6 meter length, up to 3 M height of wall with existing angle iron “Y” shaped placed 2.4 M or 3.00 M apart and with 9 horizontal R.B.T reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape (R.B.T)/ Spring core (2.5MM thick) wire of high tensile strength of 165 KG/Sq.mm with tape (0.52 mm thick) and weight 43.478 gm/meter (cost of M.S angle, CC blocks shall be paid separately) meter 290.80.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge In cement mortar

Dismantling steel work in single sections including dismembering and stacking within 50 meters lead in : Channels, angles, tees and flat

Channels, angles, tees and flats Credit to work for dismantled materials Bricks works

Providing and laying in position cement concrete of specified grade 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade pigment using ordinary cement

Providing and laying in position cement concrete of specified grade 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade pigment using ordinary cement

MOHD. SHAFI DAGGA

M/S DAR CONSTRUCTION

MOHD. SHAFI DAGGA

PEERZADA NISAR AHMED