CE-MTPSI-SE-ES-EMI-OT151-25-26

Charges for replacement of Spring charge motor/Shunt release coil assembly/ Closing coil/ tripping coil in 6.6 KV HT VCB - each 1 No.

Charges for replacement and Healthiness Checking of Vacuum Interrupter in 6.6 KV HT VCB

Replacement of Drive Rod insulator in 6.6 KV HT VCB

Replacement of Mechanism in 6.6 KV HT VCB

Charges for replacement of screw rod / square rod with new spares with welding/cutting work and checking the close/open operations Electrical and Mechanical in 6.6 KV HT VCB

Charges for modification & alignment for single truck bearing guide bracket left & right by double truck bearing guide bracket in 6.6 KV HT VCB

Charges for dismantling rear pole assemble and replacing of any one Phase bottom supporting insulator by healthy spares and checking alignment work, close/open operations in 6.6 KV HT VCB

Charges for dismantling and replacing of any one Phase Top supporting insulator by healthy spares and checking alignment work, close/open operations in 6.6 KV HT VCB

Charges for replacement of Finger contact & Terminal pad, Top flange by healthy spares & cleaning of carbonized dust & Interrupter and alignment checking in 6.6 KV HT VCB

Charges for replacement of screw rod / square rod with new spares with welding/cutting work and checking the close/open operations Electrical and Mechanical in 6.6 KV HT VCB

Charges for dismantling and reassembling the shutter lifting mechanism, VCB rail assembly, Shutter lifting bracket with welding work in fulcrum pin and checking operation alignment checking in 6.6 KV HT VCB

Charges for checking, dismantling replacing the defective drive insulator and vacuum interrupter by healthy spares and alignment checking in 6.6 KV HT VCB

Charges for CT contact bushing alignment and blue matching work and finger contact replacement work for Breaker timing adjustment and Breaker mechanism rectification works in 6.6 KV s HT VCB

Charges for Assembling, Fixing, Erection of 3 Nos. 200/1-1A Current Transformers and 3 Nos Dummy Bushing and Blue Matching with breaker contacts and allied works in 6.6 KV HT VCB

Charges for attending closing mechanism problem rectification works in 6.6 KV HT VCB - Data IV

Charges for attending the defect in the manual charging mechanism in 6.6 KV HT VCB

Charges for dismantling the charging spring, charging gear assembly, spring charge motor and replacing by new charging gear & reassembled the spring charge motor & springs, alignment done & checking the electrical & mechanical operation in 6.6 KV HT VCB

Charges for rectification of Trip / Close mechanism problem, replacing of Tripping latch & needle bearing and rectification of closing mechanism tandam rod in 6.6 KV HT VCB

Charges for releasing existing bushing CT & fixing of new bushing CT irrespective of ratio in any one of O/G panel in HT buses 1.Disconnect the O/G cable, O/G bus bar for both power cable and CT side. 2. Releasing fixing bolt of existing bushing CT and release the CT. 3. After completion of MRT testing fixing the New bushing CT. 4. After completing CT work to check the blue matching & alignment work. 5. 1 No vacuum bottle replaced by spare one due to any failure of existing one

Charges for service & test position interlock adjustment, both incoming & outgoing bushing CT adjustment , safety shutter adjustment & alignment, blue matching & Mechanical interlock adjustment work in 6.6 KV HT VCB

Charges for replacement of breaker pole/ Breaker shaft in 6.6 KV Alind/ABB/ Siemens HT VCB

Charges for replacement of Spring charge motor/Shunt release coil / Closing coil/ tripping coil/ Anti pumping coil assembly in 415V, LT ACB - each 1 No.

Charges for replacement of Closing/ charging mechanism/ Motorizing operating mechanisms in 415V, LT ACB - each 1 No.

Charges for replacement of Main contacts (Fixed /Moving) assemblies, Closing/ opening springs in 415V, LT ACB - each 1 No.

Charges for replacement of Arc chutes/Arc chamber/ Contact assembly/Jaw contacts / Cluster contact in 415V, LT ACB - each 1 No.

Charges for replacement of charging handle/ Electronic trip relay controller/ safety shutter/ moving/ fixed shunt/ pole group insulating box in 415V, LT ACB - each 1 No.

Charges for replacement of draw out cradle/ auxiliary switches/ Under voltage release in 415V, LT ACB - each 1 No.

Charges for replacement of resistance/ trip/close handle in 415V, LT ACB - each 1 No.

Charges for replacement of Ratchet assembly in 415V, LT ACB- each 1 No.

Cost of consumables